ShadowCopy/RestorePoint cleanup__

Hello.
running WinVistaHomePrem

I am able to access the list of "restore points", but seems to be the only option for cleaning 'everything except the most recent' (via the Panel configuration-BU & restoration or C:properties disk cleanup)

I'd like to be able to keep only the most recent product daily automatic VSS, but also specific newspapers and
those that I myself create inbetween,

IS THIS POSSIBLE? or am I limited?

other ideas/suggestions greatly appreciated (3rd part-ware, if necess-i know FileHamster = expensive)

thx for your time & thots
R

http://www.bleepingcomputer.com/tutorials/tutorial143.html#disable

Above shows the limits of the system restore.

See you soon. Mick Murphy - Microsoft partner

Tags: Windows

Similar Questions

  • Unable to create restore point shadowcopy has expired

    All gone, impossible to create a new point [first] restore restore points. Computer takes about 15 min then displays a message to delay shadowcopy. lots of storage allocated to shadowcopy. Any suggestions thanks

    Hi Anacondas,

    ·        Who is the manufacturer of the DVD drive?

    You can click Next when he invites drivers and try to install generic drivers for the DVD player and check if it works very well.

    You can also check in Device Manager if DVD players are publicly unknown peripheral unders and try to update and install the driver from the Device Manager and check if it helps.

    Access the link below and follow the steps to update the drivers.

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    If the steps above do not help, you do a system restore on your computer and check if it helps you recover DVD players.

    To restore the operating system to an earlier point in time, follow these steps:
    a. Click Start, type system restore in the search box and then in the list click on the system restore program.
    If you are prompted for an administrator password or a confirmation, type your password or click on continue.
    b. in the System Restore dialog box, click on choose a different restore point and then click Next.
    c. in the list of restore points, click a restore point created before you started having the problem and then click Next, click Finish.

    The computer restarts and system files and settings are back to the State they were in when the restore point was created.

    Access the link below to learn more about how to repair the operating system and how torestore the configuration of operating system to a point in time earlier in Windows Vista:

    http://support.Microsoft.com/kb/936212

    I hope this helps. Let us know the result.

    Thank you and best regards,

     

    Srinivas R

    Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • RestorePoint feature' is disabled, preventing the update of drivers

    Original title: Edward

    'Restorepoint' is disabled, preventing the update of drivers

    Question: How and where I turn it back?

    Please visit: http://www.sevenforums.com/tutorials/81500-system-restore-enable-disable.html

  • Crasches Firefox and Thunderbird after reinstall

    Today first Thunderbird crasched and after that, it was impossible to start Firefox or Thunderbird.
    I removed all the programs from the PC (W7 64 bit) Mozilla and reinstalled a fresh installation. Both programs still crasches at startup.

    Think the problem is resolved, restored to a restorepoint earlier and everything seems fine!
    The only problem I found was that Thunderbird could not load XPCOM (?).
    After reinstall TB that the problem has been resolved.

    Thank you for your support.

    Janagren

  • Failing 10Z NB200 standby or Hibernate mode

    Hi, I hope someone can help. For the last two or three days my NB200 were hung from windows 'preparation to sleep' or "preparation for the Hibernate" screen and the only thing to do is prolonged pressure on the power button. What is happening with both the FN keys and through the start menu. Sometimes it is suspended during an internet session when the Windows menus are accessible by any selection or closure is possible. I do not download other programs that updates for Firefox, Windows and antivirus. I use Windows XP. Any advice?

    Hi jillp,
    Search for the question...
    or do a cover...
    or try a previous restorepoint

    I don't know that it is a software problem...
    I would like to recover the default unit and watch if the problem disappeared...

    sure your data first!

  • Re: Satellite L300 - 23K - how to reinstall?

    Hello. I have problems with above mentioned laptop.

    At startup it starts to load Vista Home Basic, and then after some time, he said: "x:... windows\system32\drvload.exe ', then goes to"the installed program cannot start. Click OK to turn off the computer.

    When using F8 to choose one of the options listed, the same thing happens. When I want to "0" when starting to do factory reset nothing happens, when I use an ERD and try to rapair it said "...» Impossible to repair the installation, contact microsoft etc. ». Can't find it any restorepoints.

    What are my options? I have no cd, only repair disk that I have dowloadet on the net. OS is legitimate and everything with it. I suspect that the sliver of recovery is intact on the HARD drive. I have access to the HARD disk via bootcd with various programs to repair.
    Suggestions?
    Consider better fram Martin, Norway

    Hello

    The recovery process is described here:
    http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm

    If the disk HARD recovery doesn't work, you will need to use the Toshiba recovery disc. Usually, this disc you must create yourself with pre-installed recovery disc creator. This is mentioned in the user manual, but you haven't read?

    Fact is now it s too late to do this because Windows doesn't start anymore, but what you can do is to order a resumption of Toshiba directly:
    https://backupmedia.Toshiba.EU/landing.aspx

  • file missing or corrupt windows\system32\config\system

    HELP - by on the title I did: -.

    The full, first part, follow these steps:

    1. Insert the diskette of starting Windows XP in the floppy drive, or insert the Windows XP CD into the CD-ROM drive and restart the computer.
      Click to select all of the options required to start the computer from the CD-ROM drive if you are prompted to do so.
    2. When the "Welcome" screen appears, press R to start the Recovery Console.
    3. If you have a dual-boot or multiboot, select the installation that you want to access from the Recovery Console.
    4. When you are prompted to do so, type the administrator password. If the administrator password is blank, just press ENTER.
    5. At the Recovery Console prompt, type the following lines, pressing ENTER after you type each line:
      MD tmp
      copy c:\windows\system32\config\system c:\windows\tmp\system.bak
      copy c:\windows\system32\config\software c:\windows\tmp\software.bak
      Copy c:\windows\system32\config\sam c:\windows\tmp\sam.bak
      copy c:\windows\system32\config\security c:\windows\tmp\security.bak
      copy c:\windows\system32\config\default c:\windows\tmp\default.bak

      delete c:\windows\system32\config\system
      delete c:\windows\system32\config\software
      Delete c:\windows\system32\config\sam
      delete c:\windows\system32\config\security
      Delete c:\windows\system32\config\default

      Copy c:\windows\repair\system c:\windows\system32\config\system
      copy c:\windows\repair\software c:\windows\system32\config\software
      copy c:\windows\repair\sam c:\windows\system32\config\sam
      Copy c:\windows\repair\security c:\windows\system32\config\security
      Copy c:\windows\repair\default c:\windows\system32\config\default

    6. Type exit to quit the Recovery Console. Your computer will restart.

    Note This procedure assumes that Windows XP is installed in the C:\Windows folder. Make sure that replace C:\Windows with the appropriate dossier_Windows if it is a different place.

    If you have access to another computer, to save time, you can copy the text in step 5, and then create a text file called "Regcopy1.txt" (for example). To use this file, run the following command when you start in Recovery Console:

    batch regcopy1.txt

    With the command batch to the Recovery Console, you can process all the commands in a text file in the order. When you use thebatch command, you do not have to manually type as many commands.

    Second part

    To perform the procedure described in this section, you must be logged in as administrator or an administrative user (a user who has an account in the Administrators group). If you use Windows XP Home Edition, you can connect as an administrative user. If you sign in as an administrator, you must first start Windows XP Home Edition in safe mode. To start the computer in Windows XP Home Edition in safe mode, follow these steps.

    Note Print these instructions before continuing. You cannot view these instructions after you restart the computer in Mode safe. If you use the NTFS file system, also print the instructions from article KB309531 of the Knowledge Base. Step 7 contains a reference to the article.

    1. Click Start , click shut down (or click turn off computer ), click restart , and then click OK (or click restart ).
    2. Press the F8 key.

      On a computer that is configured to start to multiple operating systems, you can press F8 when you see the boot menu.

    3. Use the arrow keys to select the appropriate safe mode option and press ENTER.
    4. If you have a dual-boot or multiboot system, use the arrow keys to select the installation that you want to access, and then press ENTER.

    In part two, you copy the registry of their location saved files by using the system restore. This folder is not available in the Recovery Console, and is usually not visible on the typical use. Before you begin this procedure, you must change several settings to make the folder visible:

    1. Start Windows Explorer.
    2. On the Tools menu, click folder options .
    3. Click the view tab.
    4. Under hidden files and folders , select Show hidden folders and files , and then click to clear theHide protected (recommended) operating system files check box.
    5. When appears in the dialog box confirming that you want to display these files, click Yes .
    6. Double-click the drive where you installed Windows XP to display the list of folders. If it is important to click on the correct drive.
    7. Open the System Volume Information folder. This folder is not available and is dimmed because it is defined as a file hidden doubling.

      Note This folder contains one or more _restore {GUID} folders such as "_restore {87BD3667-3246-476B-923F-F86E30B3E7F8}.

      Note You may receive the following error message:

      C:\System Volume Information is not accessible. Access is denied.

      If you receive this message, see the following article in the Microsoft Knowledge Base for access to this folder and continue with the procedure:

      309531 (http://support.microsoft.com/kb/309531/) how to access the System Volume Information folder
    8. Open a folder that was created not at the present time. You may need to clickDetails on the view menu to see when these folders were created. There may be one or more folders starting with "RPx under this folder. Here are the restore points.
    9. Open one of these folders to find a subfolder of the snapshot. The following path is an example of a folder path to the snapshot folder:
      C:\System Volume \RP1\Snapshot Information\_restore {D86480E3-73EF-47BC-A0EB-A81BE6EE3ED8}
    10. Starting from the Snapshot folder, copy the following files to the C:\Windows\Tmp folder:
      • _REGISTRY_USER_. DEFAULT
      • _REGISTRY_MACHINE_SECURITY
      • _REGISTRY_MACHINE_SOFTWARE
      • _REGISTRY_MACHINE_SYSTEM
      • _REGISTRY_MACHINE_SAM
    11. Rename the files in the C:\Windows\Tmp folder as follows:
      • Rename _REGISTRY_USER_. DEFAULT DEFAULT
      • Rename _REGISTRY_MACHINE_SECURITY to SECURITY
      • Rename _REGISTRY_MACHINE_SOFTWARE to SOFTWARE
      • Rename _REGISTRY_MACHINE_SYSTEM to SYSTEM
      • Rename _REGISTRY_MACHINE_SAM to SAM

    These files are the system restore registry files. Because you used the registry file that the Setup program created, this registry does not know that these restore points exist and are available. A new folder is created with a new GUID under System Volume Information and a restore point is created that includes a copy of the registry files that were copied during the first part. Therefore, it is important not to use the most recent folder, especially if the time stamp on the folder is the same at the moment.

    The current configuration of the system is not aware of the previous restore points. You must have a previous copy of the registry to a previous restore point to make previous restore available again points.

    The registry files that were copied to the Tmp folder in the C:\Windows folder are moved to ensure the files are available in the Recovery Console. You use these files to replace the registry files currently in the C:\Windows\System32\Config folder. By default, the Recovery Console has limited access to records and cannot copy the files in the File System Volume.

    Note The procedure described in this section assume you are using your computer with the FAT32 file system. For more information on how to access the folder of information system with the NTFS file system Volume, click on the number below to view the article in the Microsoft Knowledge Base:

    309531 (http://support.microsoft.com/kb/309531/) how to access the System Volume Information folder

    Third part

    In part three, you delete the existing registry files, and then copy the system restore registry files to the C:\Windows\System32\Config folder:

    1. Start the Recovery Console.
    2. At the command prompt, type the following lines, pressing ENTER after you type each line:
      del c:\windows\system32\config\sam

      del c:\windows\system32\config\security

      del c:\windows\system32\config\software

      del c:\windows\system32\config\default

      del c:\windows\system32\config\system

      copy c:\windows\tmp\software c:\windows\system32\config\software

      copy c:\windows\tmp\system c:\windows\system32\config\system

    copy c:\windows\tmp\sam c:\windows\system32\config\sam

    Copy c:\windows\tmp\security c:\windows\system32\config\security

    Copy c:\windows\tmp\default c:\windows\system32\config\default

    Note Some of these command lines may be wrapped for readability.

  • Type exit to quit the Recovery Console. Restart the computer.

    • Note This procedure assumes that Windows XP is installed in the C:\Windows folder. Make sure that replace C:\Windows with the appropriate dossier_Windows if it is a different place.

    If you have access to another computer, to save time, you can copy the text in step 2, and then create a text file named "Regcopy2.txt" (for example). To use this file, run the following command when you start in Recovery Console:

    regcopy2.txt batch

    Fourth part

    1. Click Start and then click all programs .
    2. Click on Accessories , then System Tools .
    3. Click System Restore , and then click restore to a previous RestorePoint .

    and now when I go to the fourth part and try to connect, it says I need to activate windows to open a session. If I click on Yes, the computer crashes just in my background image, if I click on no, this Chuck me back to the log in page... What is wrong with this blooming thing

    Please HELP - it took three days of messing around and actually the Ive got nowhere!

    OOOOO... should start here:
    The question was preceded by a loss of power, aborted reboot or abnormal termination? (this includes pulling and buttons power)
    These can cause corruption in the file system that must be fixed before you do anything else.
    If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).
    There is zero logic to start try to copy files to a hard drive that has a corrupted file system, so this must be first using the XP chkdsk program and run chkdsk can solve your problem completely.
    Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.
    Start the Recovery Console Windows using an XP bootable installation CD, or create a bootable XP Recovery CD of Console.
    This is not the same as recovery disks that may have come to a store to purchase the system.  If you don't know what kind of bootable CD, you, do a CD of bootable XP Recovery Console and do not forget.
    After booting into the Recovery Console, you should be in this folder:
    C:\WINDOWS
    For each of your hard disk partitions, you must then run:
    Chkdsk /r
    For example, at the Recovery Console prompt, enter:
    CHKDSK c: /r
    Let chkdsk finish to correct the problems, he could find.  It may take a long time to complete or seem to be 'glued '.  Be patient.  If the HARD drive light flashes, it's something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.
    The chkdsk/r must be completed without error, you may need to run several times until it does.
    Remove the CD and then type "exit" to exit the RC and restart the computer and the report with your progress.

    Do, or do not. There is no test.

    I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

  • system32\configuration\system or corrupted - boot problem

    I have a laptop, Inspiron 1525, with XP Home Edition.  I keept is message read, "" Windows didn't start because the folloing file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM "I tried the repair process, the F8 key, including" last good configuration, all to no known use.  Help, please

    Hello dutcchess
    I just down loaded this how to from microsoft

    When you try to start or restart your Windows XP-based computer, you may receive one of the following error messages:

    Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM
    Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SOFTWARE
    Stop: c0000218 {Registry file failure} the registry cannot load the hive (file): \SystemRoot\System32\Config\SOFTWARE or its log or replacing
    System error: Lsass.exe
    When you try to update a password the return status indicates that the value provided as the current password is not correct.

    Guided Help to recover a corrupted registry that prevents Windows XP startup

    Guided Help is available to help recover a corrupted registry that prevents Windows XP startup. Guided Help can automatically perform the steps for you.

    Actions running this guided help can be undone after Guided Help is complete. To undo the actions running this Guided Help to restore corrupted registry files, start the Recovery Console, and then manually copy the Windows\Tmp\*.bak files in the Windows\System32\Config folder. Be sure to rename the files to remove the .bak extension.

    For more information about guided help, click on the number below to view the article in the Microsoft Knowledge Base:

    915092 (http://support.microsoft.com/kb/915092/) Description of guided help for Microsoft Knowledge Base articles

    Requirements to install and to use this guided help

    • You must be logged to Windows using an administrator account to install and to use this guided help.
    • You must run Windows XP Home Edition, Windows XP Professional, Windows XP Media Center Edition or Windows XP Edition Tablet PC to install and to use this guided help.

    You must first download Guided Help. To start, click on the following link:

    (http://support.microsoft.com/kb/307545/)

    Manual steps to recover a corrupted registry that prevents the start of the procedure that this article describes to Windows XP using System Restore and Recovery Console. This article lists also all required specific steps to ensure that the process is fully completed. When you have completed this procedure, the system returns to a state very close to the State until the problem occurred. If you have ever run NTBackup and completed a system state backup, you don't have to follow the procedures in parts two and three. You can go to part IV. First part in the first part, you start the Recovery Console, create a temporary folder, back up the existing registry files to a new location, delete the registry from their existing location files and then copy the registry files in the repair folder to the System32\Config folder. When you have completed this procedure, a registry is created that you can use to start Windows XP. This registry was created and saved during the initial setup of Windows XP. Therefore, any changes and settings that took place after Setup has finished are lost.

    The full, first part, follow these steps:

    1. Insert the diskette of starting Windows XP in the floppy drive, or insert the Windows XP CD into the CD-ROM drive and restart the computer.

    Click to select all of the options required to start the computer from the CD-ROM drive if you are prompted to do so.
  • When the "Welcome" screen appears, press R to start the Recovery Console.
  • If you have a dual-boot or multiboot, select the installation that you want to access from the Recovery Console.
  • When you are prompted to do so, type the administrator password. If the administrator password is blank, just press ENTER.
  • At the Recovery Console prompt, type the following lines, pressing ENTER after you type each line:
    MD tmp
    copy c:\windows\system32\config\system c:\windows\tmp\system.bak
    copy c:\windows\system32\config\software c:\windows\tmp\software.bak
    Copy c:\windows\system32\config\sam c:\windows\tmp\sam.bak
    copy c:\windows\system32\config\security c:\windows\tmp\security.bak
    copy c:\windows\system32\config\default c:\windows\tmp\default.bak

    delete c:\windows\system32\config\system
    delete c:\windows\system32\config\software
    Delete c:\windows\system32\config\sam
    delete c:\windows\system32\config\security
    Delete c:\windows\system32\config\default

    Copy c:\windows\repair\system c:\windows\system32\config\system
    copy c:\windows\repair\software c:\windows\system32\config\software
    copy c:\windows\repair\sam c:\windows\system32\config\sam
    Copy c:\windows\repair\security c:\windows\system32\config\security
    Copy c:\windows\repair\default c:\windows\system32\config\default

  • Type exit to quit the Recovery Console. Your computer will restart.

    • Note This procedure assumes that Windows XP is installed in the C:\Windows folder. Make sure that replace C:\Windows with case windows_folder If it is a different place.

    If you have access to another computer, to save time, you can copy the text in step 5, and then create a text file called "Regcopy1.txt" (for example). To use this file, run the following command when you start in Recovery Console:

    batch regcopy1.txt

    With the command batch to the Recovery Console, you can process all the commands in a text file in the order. When you use the batch command, you do not have to manually type as many commands. Second part to perform the procedure described in this section, you must be logged on as an administrator or an administrative user (a user who has an account in the Administrators group). If you use Windows XP Home Edition, you can connect as an administrative user. If you sign in as an administrator, you must first start Windows XP Home Edition in safe mode. To start the computer in Windows XP Home Edition in safe mode, follow these steps.

    Note Print these instructions before continuing. You cannot view these instructions after you restart the computer in Mode safe. If you use the NTFS file system, also print the instructions from article KB309531 of the Knowledge Base. Step 7 contains a reference to the article.

    1. Click Start, click shut down (or click turn off computer), click restart, and then click OK (or click restart).
    2. Press the F8 key.

      On a computer that is configured to start to multiple operating systems, you can press F8 when you see the boot menu.

    3. Use the arrow keys to select the appropriate safe mode option and press ENTER.
    4. If you have a dual-boot or multiboot system, use the arrow keys to select the installation that you want to access, and then press ENTER.

    In part two, you copy the registry of their location saved files by using the system restore. This folder is not available in the Recovery Console, and is usually not visible on the typical use. Before you begin this procedure, you must change several settings to make the folder visible:

    1. Start Windows Explorer.
    2. On the Tools menu, click folder options.
    3. Click the view tab.
    4. Under hidden files and folders, select Show hidden folders and files, and then click to clear the Hide protected (recommended) operating system files check box.
    5. When appears in the dialog box confirming that you want to display these files, click Yes .
    6. Double-click the drive where you installed Windows XP to display the list of folders. If it is important to click on the correct drive.
    7. Open the System Volume Information folder. This folder is not available and is dimmed because it is defined as a file hidden doubling.

      Note This folder contains one or more _restore {GUID} folders such as "_restore {87BD3667-3246-476B-923F-F86E30B3E7F8}.

      Note You may receive the following error message:

      C:\System Volume Information is not accessible. Access is denied.

      If you receive this message, see the following article in the Microsoft Knowledge Base for access to this folder and continue with the procedure:

      309531 (http://support.microsoft.com/kb/309531/) how to access the System Volume Information folder
    8. Open a folder that was created not at the present time. You may need to click Details on the view menu to see when these folders were created. There may be one or more folders starting with "RP x under this folder." Here are the restore points.
    9. Open one of these folders to find a subfolder of the snapshot. The following path is an example of a folder path to the snapshot folder:
      C:\System Volume \RP1\Snapshot Information\_restore {D86480E3-73EF-47BC-A0EB-A81BE6EE3ED8}
    10. Starting from the Snapshot folder, copy the following files to the C:\Windows\Tmp folder:
      • _REGISTRY_USER_. DEFAULT
      • _REGISTRY_MACHINE_SECURITY
      • _REGISTRY_MACHINE_SOFTWARE
      • _REGISTRY_MACHINE_SYSTEM
      • _REGISTRY_MACHINE_SAM
    11. Rename the files in the C:\Windows\Tmp folder as follows:
      • Rename _REGISTRY_USER_. DEFAULT DEFAULT
      • Rename _REGISTRY_MACHINE_SECURITY to SECURITY
      • Rename _REGISTRY_MACHINE_SOFTWARE to SOFTWARE
      • Rename _REGISTRY_MACHINE_SYSTEM to SYSTEM
      • Rename _REGISTRY_MACHINE_SAM to SAM

    These files are the system restore registry files. Because you used the registry file that the Setup program created, this registry does not know that these restore points exist and are available. A new folder is created with a new GUID under System Volume Information and a restore point is created that includes a copy of the registry files that were copied during the first part. Therefore, it is important not to use the most recent folder, especially if the time stamp on the folder is the same at the moment.

    The current configuration of the system is not aware of the previous restore points. You must have a previous copy of the registry to a previous restore point to make previous restore available again points.

    The registry files that were copied to the Tmp folder in the C:\Windows folder are moved to ensure the files are available in the Recovery Console. You use these files to replace the registry files currently in the C:\Windows\System32\Config folder. By default, the Recovery Console has limited access to records and cannot copy the files in the File System Volume.

    Note The procedure described in this section assume you are using your computer with the FAT32 file system. For more information on how to access the folder of information system with the NTFS file system Volume, click on the number below to view the article in the Microsoft Knowledge Base:

    309531 (http://support.microsoft.com/kb/309531/) how to access the System Volume Information folder

    Part three in the third part, you delete the existing registry files, and then copy the system restore registry files to the C:\Windows\System32\Config folder:

    1. Start the Recovery Console.
    2. At the command prompt, type the following lines, pressing ENTER after you type each line:
      del c:\windows\system32\config\sam

      del c:\windows\system32\config\security

      del c:\windows\system32\config\software

      del c:\windows\system32\config\default

      del c:\windows\system32\config\system

      copy c:\windows\tmp\software c:\windows\system32\config\software

      copy c:\windows\tmp\system c:\windows\system32\config\system

    copy c:\windows\tmp\sam c:\windows\system32\config\sam

    Copy c:\windows\tmp\security c:\windows\system32\config\security

    Copy c:\windows\tmp\default c:\windows\system32\config\default

    Note Some of these command lines may be wrapped for readability.

  • Type exit to quit the Recovery Console. Restart the computer.

    • Note This procedure assumes that Windows XP is installed in the C:\Windows folder. Make sure that replace C:\Windows with case windows_folder If it is a different place.

    If you have access to another computer, to save time, you can copy the text in step 2, and then create a text file named "Regcopy2.txt" (for example). To use this file, run the following command when you start in Recovery Console:

    regcopy2.txt batch

    Fourth part

    1. Click Startand then click all programs.
    2. Click on Accessories, then System Tools.
    3. Click System Restore, and then click restore to a previous RestorePoint.

    REFERENCES

    For more information about using the Recovery Console, click the n in the following article...
    For more information about using the Recovery Console, click the numbers below to view the articles in the Microsoft Knowledge Base:

    307654 (http://support.microsoft.com/kb/307654/) how to install and use the Recovery Console in Windows XP
    216417 (http://support.microsoft.com/kb/216417/) how to install the Windows Recovery Console
    240831 (http://support.microsoft.com/kb/240831/) how to copy files from the recovery on removable media Console
    314058 (http://support.Microsoft.com/kb/314058/fr/) Description of the Windows XP Recovery Console

    For more information about system restore, click on the numbers below to view the articles in the Microsoft Knowledge Base:

    306084 (http://support.microsoft.com/kb/306084/) how to restore the operating system to a previous state in Windows XP
    261716 (http://support.microsoft.com/kb/261716/) System Restore removes files during a restore procedure

    For more information about the three likely causes of registry corruption and how to isolate, click on the number below to view the article in the Microsoft Knowledge Base:

    822705 (http://support.microsoft.com/kb/822705/) for advanced users registry troubleshooting steps
    • Microsoft Windows XP Home Edition
    • Microsoft Windows XP Professional
    • Microsoft Windows XP Tablet PC Edition
    • Microsoft Windows XP Media Center Edition

    If this post can help solve your problem, please click the mark as answer check on this page THANKS AND GOOD LUCK

  • Windows Malicious Software Removal Tool - October 2011 (KB890830) bug

    Hello!

    After you install this update on my system I couldn't start over.
    My system has 2 to 3 monitors video cards. When I tried to start it, I saw the windows logo and the indicator of loading of the screen where it asks for the password never appeared. Instead, I saw one of my monitors trying to find the signal /it was properly attached. This monitor is the one that is connected to a lb/PO2 Zotac video card. I changed the cable DVI, same result. Tried only two monitors, same result. I wasn't able to boot my system until I pulled my Zotac video card. / Which was in funcitoning properly in the last half of the year / windows started and I managed to do a system restore and everything went back to normal.
    I applied the 1 updates by one, and all of them were ok, apart from that 1. When I tried to install it again / after you have created a new restorepoint / after the reboot, windows this time managed to start, but rather my taskbar, I saw a big black box on his place and windows frooze.
    I would like to know what'll I please!
    If you need additional information pls let me know!

    Kind regards
    Zsolt

    Why would you use MSRT in the first place?

    It is one of the paler malware removal tools, weakest and most powerless you could choose.

    Because it receives that updates once a month on Patch Tuesday and other free anti-virus products update their definitions sometimes several times per day, it has no sense for me to even consider adding my system with MSRT.  They have already stopped supporting MSRT on some platforms MS (perhaps because it is so low).

    New threats on your system are discovered every day.  Why wait a month and hope MSRT has kept pace with the latest threats?

    Remember, Microsoft isn't in the prevention of malware, detection software or moving - company is their specialty and that's not their job.

    There are other companies where the removal, prevention and detection of malware is their specialty and that's all they do all day long.

    Why are we expect or ask Microsoft to surpass in the areas where it's not their job?  Microsoft is an amateur in the AV business

    I can assure you that I can get my system infected a dozen different ways (on purpose of course), which allows to detect any product Microsoft AV.

    If you are forced to use a Microsoft product, use Microsoft Security Essentials (MSE) and combine with MBAM and SAS for analysis on demand.  At least MSE seems to get updates every day or almost.  MBAM and SAS often updated with new definitions of virus several times a day.

    I would start with the free version of MBAM and SAS because they cost nothing, they are well respected, reliable and don't install any boot on your computer and they uninstall cleanly if ever there is a need to remove them (there is no trace).  If you want real-time protection, you can upgrade to paid versions.

    If you want the best prevention, detection and suppression of results, stick to companies where it is their specialty and not just some marginalize offering.

  • I can't go in front of a blue screen error. How can I make a bootable XP floppy?

    Title screen: Blue origin of death

    I have acer travelmate 4670 with xp pro, I get the blue screen of death. I can't freeze the screen long enough to read the target specific code. I have not installation disks. in safe mode, cdrom sees disk but I can't access anything on the disc, when I click on disc, it climbs to another location on the directory tree. How can I do a xp boot disk so that I can access and solve this problem? is it possible to make my other laptop startup disk a gateway with vista home premium can I assemble files and burn it it?  I saved my data from the computer and do not seem to have the option of restore disk hard partition is there anything I can do short of buying a brand new OS to install I can't right now means and need the computer to find work.

    Thank you

    Hello

    Have you tried a system restore to a restorepoint?

    http://support.Microsoft.com/kb/306084

    Is your operating system preinstalled with your system?

    Then you must consult the manufacturer for a replacement drive.

    If you want an upgrade, I recommend windows 7.

    Kind regards

    Joel

  • backup fails with the error (0 x 80042318) (VSS_E_WRITER_INFRASTRUCTURE)

    -J' get the following errors when you try to back up my box.

    MsSnapShot::waitop:GatherWriterMetadata:QueryStatus2 error hr (0 x 80042318) (VSS_E_WRITER_INFRASTRUCTURE)
    MsSnapShot::do_gather_writer_metadata:waitop RC(-4)
    MsSnapShot::do_init:do_gather_writer_metadata error(-2)
    SnapCMInterface::discover_apps:list_backup_selectable (RC(-3)

    -exit "vssadmin list providers" seems correct

    -"vssadmin list writers" shows nothing

    -Volume Shadow Copy and provider of software MS Shadowcopy are disabled

    LxA10,
    One thing I suggest you start by would be to run Chkdsk /r and sfc/scannow.  See if those correct any errors and test.  Also, you should boot your system and test.

    Also, if you can let us know what version of XP and what service pack level you have.  You use the backup and Restore Wizard or another program?

    Post back with the info. Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I only part I to recover from a corrupt registry! Help

    A couple of weeks, I had a Windows XP didn't start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM.  I did a restore using the following
    First part
    In the first part, you start the Recovery Console, create a temporary folder, back up the existing registry files to a new location, delete the registry from their existing location files and then copy the registry files in the repair folder to the System32\Config folder. When you have completed this procedure, a registry is created that you can use to start Windows XP. This registry was created and saved during the initial setup of Windows XP. Therefore, any changes and settings that took place after Setup has finished are lost.

    The full, first part, follow these steps:

    1. Insert the diskette of starting Windows XP in the floppy drive, or insert the Windows XP CD into the CD-ROM drive and restart the computer.
      Click to select all of the options required to start the computer from the CD-ROM drive if you are prompted to do so.
    2. When the "Welcome" screen appears, press R to start the Recovery Console.
    3. If you have a dual-boot or multiboot, select the installation that you want to access from the Recovery Console.
    4. When you are prompted to do so, type the administrator password. If the administrator password is blank, just press ENTER.
    5. At the Recovery Console prompt, type the following lines, pressing ENTER after you type each line:
      MD tmp
      copy c:\windows\system32\config\system c:\windows\tmp\system.bak
      copy c:\windows\system32\config\software c:\windows\tmp\software.bak
      Copy c:\windows\system32\config\sam c:\windows\tmp\sam.bak
      copy c:\windows\system32\config\security c:\windows\tmp\security.bak
      copy c:\windows\system32\config\default c:\windows\tmp\default.bak

      delete c:\windows\system32\config\system
      delete c:\windows\system32\config\software
      Delete c:\windows\system32\config\sam
      delete c:\windows\system32\config\security
      Delete c:\windows\system32\config\default

      Copy c:\windows\repair\system c:\windows\system32\config\system
      copy c:\windows\repair\software c:\windows\system32\config\software
      copy c:\windows\repair\sam c:\windows\system32\config\sam
      Copy c:\windows\repair\security c:\windows\system32\config\security
      Copy c:\windows\repair\default c:\windows\system32\config\default

    6. Type exit to quit the Recovery Console. Your computer will restart.

    Note This procedure assumes that Windows XP is installed in the C:\Windows folder. Make sure that replace C:\Windows with the appropriate dossier_Windows if it is a different place.

    If you have access to another computer, to save time, you can copy the text in step 5, and then create a text file called "Regcopy1.txt" (for example). To use this file, run the following command when you start in Recovery Console:

    batch regcopy1.txt

    With the command batch to the Recovery Console, you can process all the commands in a text file in the order. When you use the batch command, you do not have to manually type as many commands. Second part to perform the procedure described in this section, you must be logged on as an administrator or an administrative user (a user who has an account in the Administrators group). If you use Windows XP Home Edition, you can connect as an administrative user. If you sign in as an administrator, you must first start Windows XP Home Edition in safe mode. To start the computer in Windows XP Home Edition in safe mode, follow these steps.

    Note Print these instructions before continuing. You cannot view these instructions after you restart the computer in Mode safe. If you use the NTFS file system, also print the instructions from article KB309531 of the Knowledge Base. Step 7 contains a reference to the article.

    1. Click Start, click shut down (or click turn off computer), click restart, and then click OK (or click restart).
    2. Press the F8 key.

      On a computer that is configured to start to multiple operating systems, you can press F8 when you see the boot menu.

    3. Use the arrow keys to select the appropriate safe mode option and press ENTER.
    4. If you have a dual-boot or multiboot system, use the arrow keys to select the installation that you want to access, and then press ENTER.

    In part two, you copy the registry of their location saved files by using the system restore. This folder is not available in the Recovery Console, and is usually not visible on the typical use. Before you begin this procedure, you must change several settings to make the folder visible:

    1. Start Windows Explorer.
    2. On the Tools menu, click folder options.
    3. Click the view tab.
    4. Under hidden files and folders, select Show hidden folders and files, and then click to clear the Hide protected (recommended) operating system files check box.
    5. When appears in the dialog box confirming that you want to display these files, click Yes .
    6. Double-click the drive where you installed Windows XP to display the list of folders. If it is important to click on the correct drive.
    7. Open the System Volume Information folder. This folder is not available and is dimmed because it is defined as a file hidden doubling.

      Note This folder contains one or more _restore {GUID} folders such as "_restore {87BD3667-3246-476B-923F-F86E30B3E7F8}.

      Note You may receive the following error message:

      C:\System Volume Information is not accessible. Access is denied.

      If you receive this message, see the following article in the Microsoft Knowledge Base for access to this folder and continue with the procedure:

    309531 (http://support.microsoft.com/kb/309531/) how to access the System Volume Information folder
  • Open a folder that was created not at the present time. You may need to click Details on the view menu to see when these folders were created. There may be one or more folders starting with "RPx under this folder. Here are the restore points.
  • Open one of these folders to find a subfolder of the snapshot. The following path is an example of a folder path to the snapshot folder:
    C:\System Volume \RP1\Snapshot Information\_restore {D86480E3-73EF-47BC-A0EB-A81BE6EE3ED8}
  • Starting from the Snapshot folder, copy the following files to the C:\Windows\Tmp folder:
    • _REGISTRY_USER_. DEFAULT
    • _REGISTRY_MACHINE_SECURITY
    • _REGISTRY_MACHINE_SOFTWARE
    • _REGISTRY_MACHINE_SYSTEM
    • _REGISTRY_MACHINE_SAM
  • Rename the files in the C:\Windows\Tmp folder as follows:
    • Rename _REGISTRY_USER_. DEFAULT DEFAULT
    • Rename _REGISTRY_MACHINE_SECURITY to SECURITY
    • Rename _REGISTRY_MACHINE_SOFTWARE to SOFTWARE
    • Rename _REGISTRY_MACHINE_SYSTEM to SYSTEM
    • Rename _REGISTRY_MACHINE_SAM to SAM

    • These files are the system restore registry files. Because you used the registry file that the Setup program created, this registry does not know that these restore points exist and are available. A new folder is created with a new GUID under System Volume Information and a restore point is created that includes a copy of the registry files that were copied during the first part. Therefore, it is important not to use the most recent folder, especially if the time stamp on the folder is the same at the moment.

    The current configuration of the system is not aware of the previous restore points. You must have a previous copy of the registry to a previous restore point to make previous restore available again points.

    The registry files that were copied to the Tmp folder in the C:\Windows folder are moved to ensure the files are available in the Recovery Console. You use these files to replace the registry files currently in the C:\Windows\System32\Config folder. By default, the Recovery Console has limited access to records and cannot copy the files in the File System Volume.

    Note The procedure described in this section assume you are using your computer with the FAT32 file system. For more information on how to access the folder of information system with the NTFS file system Volume, click on the number below to view the article in the Microsoft Knowledge Base:

    309531 (http://support.microsoft.com/kb/309531/) how to access the System Volume Information folder

    Part three in the third part, you delete the existing registry files, and then copy the system restore registry files to the C:\Windows\System32\Config folder:

    1. Start the Recovery Console.
    2. At the command prompt, type the following lines, pressing ENTER after you type each line:
      del c:\windows\system32\config\sam

      del c:\windows\system32\config\security

      del c:\windows\system32\config\software

      del c:\windows\system32\config\default

      del c:\windows\system32\config\system

      copy c:\windows\tmp\software c:\windows\system32\config\software

      copy c:\windows\tmp\system c:\windows\system32\config\system

      copy c:\windows\tmp\sam c:\windows\system32\config\sam

      Copy c:\windows\tmp\security c:\windows\system32\config\security

      Copy c:\windows\tmp\default c:\windows\system32\config\default

      Note Some of these command lines may be wrapped for readability.

    3. Type exit to quit the Recovery Console. Restart the computer.

    Note This procedure assumes that Windows XP is installed in the C:\Windows folder. Make sure that replace C:\Windows with the appropriate dossier_Windows if it is a different place.

    If you have access to another computer, to save time, you can copy the text in step 2, and then create a text file named "Regcopy2.txt" (for example). To use this file, run the following command when you start in Recovery Console:

    regcopy2.txt batch

    Fourth part

    1. Click Startand then click all programs.
    2. Click on Accessories, then System Tools.
    3. Click System Restore, and then click restore to a previous RestorePoint.

    But after the game, I, my system was up and so I didn't do parts 2 3 & 4.  The other day I got the same error message when I started so I thought that no problem I'll try that again.  Except when I get to the part in part I say type md tmp go, I get the message that this file already exists.  Can some help me with this you problem, I have tons of photos and music that I need to register!  I had windows xp professional with all service packs.

    rgmcmanus,
    If the tmp folder already exists then you can either remove and then recreate with the command "rd tmp" or you can just create a different name like tmp1.  If you keep the registry errors you may need to back up all your data and then do a clean install. Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Win XP with Windows\system32\config\system error message unable to restart in any mode.

    I have a desktop computer Acer, about 4 years old, running Windows XP SP2. When I started my computer, it does not boot in any mode, and I get this error message:

    Windows has not start because the following file is missing or damaged:
    \windows\system32\config\system
    You can attempt to repair this file by starting windows setup using the original setup cd-rom
    Select 'r' in the first screen to start repair.

    I don't have a Setup disk and wonder if it would help in all cases. Any ideas?
    You can not download configuration online info. I have a second XP computer which is supposed to have access to the configuration file in the Add/Remove Programs section, but I don't have any tab to create a disk for installation here. Do you know where he's hiding on this computer? If not, can I get a copy of this MS installation disc?
    Thank you

    Thank you

    Manual steps to recover a corrupted registry that prevents the start of the procedure that this article describes to Windows XP using System Restore and Recovery Console. This article lists also all required specific steps to ensure that the process is fully completed. When you have completed this procedure, the system returns to a state very close to the State until the problem occurred. If you have ever run NTBackup and completed a system state backup, you don't have to follow the procedures in parts two and three. You can go to part IV. First part in the first part, you start the Recovery Console, create a temporary folder, back up the existing registry files to a new location, delete the registry from their existing location files and then copy the registry files in the repair folder to the System32\Config folder. When you have completed this procedure, a registry is created that you can use to start Windows XP. This registry was created and saved during the initial setup of Windows XP. Therefore, any changes and settings that took place after Setup has finished are lost.

    The full, first part, follow these steps:

    1. Insert the diskette of starting Windows XP in the floppy drive, or insert the Windows XP CD into the CD-ROM drive and restart the computer.
      Click to select all of the options required to start the computer from the CD-ROM drive if you are prompted to do so.
    2. When the "Welcome" screen appears, press R to start the Recovery Console.
    3. If you have a dual-boot or multiboot, select the installation that you want to access from the Recovery Console.
    4. When you are prompted to do so, type the administrator password. If the administrator password is blank, just press ENTER.
    5. At the Recovery Console prompt, type the following lines, pressing ENTER after you type each line:
      MD tmp
      copy c:\windows\system32\config\system c:\windows\tmp\system.bak
      copy c:\windows\system32\config\software c:\windows\tmp\software.bak
      Copy c:\windows\system32\config\sam c:\windows\tmp\sam.bak
      copy c:\windows\system32\config\security c:\windows\tmp\security.bak
      copy c:\windows\system32\config\default c:\windows\tmp\default.bak

      delete c:\windows\system32\config\system
      delete c:\windows\system32\config\software
      Delete c:\windows\system32\config\sam
      delete c:\windows\system32\config\security
      Delete c:\windows\system32\config\default

      Copy c:\windows\repair\system c:\windows\system32\config\system
      copy c:\windows\repair\software c:\windows\system32\config\software
      copy c:\windows\repair\sam c:\windows\system32\config\sam
      Copy c:\windows\repair\security c:\windows\system32\config\security
      Copy c:\windows\repair\default c:\windows\system32\config\default

    6. Type exit to quit the Recovery Console. Your computer will restart.

    Note This procedure assumes that Windows XP is installed in the C:\Windows folder. Make sure that replace C:\Windows with the appropriate dossier_Windows if it is a different place.

    If you have access to another computer, to save time, you can copy the text in step 5, and then create a text file called "Regcopy1.txt" (for example). To use this file, run the following command when you start in Recovery Console:

    batch regcopy1.txt

    With the command batch to the Recovery Console, you can process all the commands in a text file in the order. When you use the batch command, you do not have to manually type as many commands. Second part to perform the procedure described in this section, you must be logged on as an administrator or an administrative user (a user who has an account in the Administrators group). If you use Windows XP Home Edition, you can connect as an administrative user. If you sign in as an administrator, you must first start Windows XP Home Edition in safe mode. To start the computer in Windows XP Home Edition in safe mode, follow these steps.

    Note Print these instructions before continuing. You cannot view these instructions after you restart the computer in Mode safe. If you use the NTFS file system, also print the instructions from article KB309531 of the Knowledge Base. Step 7 contains a reference to the article.

    1. Click Start , click shut down (or click turn off computer ), click restart , and then click OK (or click restart ).
    2. Press the F8 key.

      On a computer that is configured to start to multiple operating systems, you can press F8 when you see the boot menu.

    3. Use the arrow keys to select the appropriate safe mode option and press ENTER.
    4. If you have a dual-boot or multiboot system, use the arrow keys to select the installation that you want to access, and then press ENTER.

    In part two, you copy the registry of their location saved files by using the system restore. This folder is not available in the Recovery Console, and is usually not visible on the typical use. Before you begin this procedure, you must change several settings to make the folder visible:

    1. Start Windows Explorer.
    2. On the Tools menu, click folder options .
    3. Click the view tab.
    4. Under hidden files and folders , select Show hidden folders and files , and then click to clear the Hide protected (recommended) operating system files check box.
    5. When appears in the dialog box confirming that you want to display these files, click Yes .
    6. Double-click the drive where you installed Windows XP to display the list of folders. If it is important to click on the correct drive.
    7. Open the System Volume Information folder. This folder is not available and is dimmed because it is defined as a file hidden doubling.

      Note This folder contains one or more _restore {GUID} folders such as "_restore {87BD3667-3246-476B-923F-F86E30B3E7F8}.

      Note You may receive the following error message:

    C:\System Volume Information is not accessible. Access is denied.

    If you receive this message, see the following article in the Microsoft Knowledge Base for access to this folder and continue with the procedure:

    309531 (http://support.microsoft.com/kb/309531/) how to access the System Volume Information folder
  • Open a folder that was created not at the present time. You may need to click Details on the view menu to see when these folders were created. There may be one or more folders starting with "RPx under this folder. Here are the restore points.
  • Open one of these folders to find a subfolder of the snapshot. The following path is an example of a folder path to the snapshot folder:
    C:\System Volume \RP1\Snapshot Information\_restore {D86480E3-73EF-47BC-A0EB-A81BE6EE3ED8}
  • Starting from the Snapshot folder, copy the following files to the C:\Windows\Tmp folder:
    • _REGISTRY_USER_. DEFAULT
    • _REGISTRY_MACHINE_SECURITY
    • _REGISTRY_MACHINE_SOFTWARE
    • _REGISTRY_MACHINE_SYSTEM
    • _REGISTRY_MACHINE_SAM
  • Rename the files in the C:\Windows\Tmp folder as follows:
    • Rename _REGISTRY_USER_. DEFAULT DEFAULT
    • Rename _REGISTRY_MACHINE_SECURITY to SECURITY
    • Rename _REGISTRY_MACHINE_SOFTWARE to SOFTWARE
    • Rename _REGISTRY_MACHINE_SYSTEM to SYSTEM
    • Rename _REGISTRY_MACHINE_SAM to SAM

    • These files are the system restore registry files. Because you used the registry file that the Setup program created, this registry does not know that these restore points exist and are available. A new folder is created with a new GUID under System Volume Information and a restore point is created that includes a copy of the registry files that were copied during the first part. Therefore, it is important not to use the most recent folder, especially if the time stamp on the folder is the same at the moment.

    The current configuration of the system is not aware of the previous restore points. You must have a previous copy of the registry to a previous restore point to make previous restore available again points.

    The registry files that were copied to the Tmp folder in the C:\Windows folder are moved to ensure the files are available in the Recovery Console. You use these files to replace the registry files currently in the C:\Windows\System32\Config folder. By default, the Recovery Console has limited access to records and cannot copy the files in the File System Volume.

    Note The procedure described in this section assume you are using your computer with the FAT32 file system. For more information on how to access the folder of information system with the NTFS file system Volume, click on the number below to view the article in the Microsoft Knowledge Base:

    309531 (http://support.microsoft.com/kb/309531/) how to access the System Volume Information folder

    Part three in the third part, you delete the existing registry files, and then copy the system restore registry files to the C:\Windows\System32\Config folder:

    1. Start the Recovery Console.
    2. At the command prompt, type the following lines, pressing ENTER after you type each line:
      del c:\windows\system32\config\sam

      del c:\windows\system32\config\security

      del c:\windows\system32\config\software

      del c:\windows\system32\config\default

      del c:\windows\system32\config\system

      copy c:\windows\tmp\software c:\windows\system32\config\software

      copy c:\windows\tmp\system c:\windows\system32\config\system

      copy c:\windows\tmp\sam c:\windows\system32\config\sam

      Copy c:\windows\tmp\security c:\windows\system32\config\security

      Copy c:\windows\tmp\default c:\windows\system32\config\default

    Note Some of these command lines may be wrapped for readability.

  • Type exit to quit the Recovery Console. Restart the computer.

    • Note This procedure assumes that Windows XP is installed in the C:\Windows folder. Make sure that replace C:\Windows with the appropriate dossier_Windows if it is a different place.

    If you have access to another computer, to save time, you can copy the text in step 2, and then create a text file named "Regcopy2.txt" (for example). To use this file, run the following command when you start in Recovery Console:

    regcopy2.txt batch

    Fourth part

    1. Click Start and then click all programs .
    2. Click on Accessories , then System Tools .
    3. Click System Restore , and then click restore to a previous RestorePoint .

    Good luck! Please rate me upward if you find my post helpful. Thank you!

  • Speakers stopped working after a BSOD in Windows 7

    Hello, after obtaining a playlist Spotify sent to me I got a BSOD that I started playing the first song. I ofc realizes that it is a matter of Spotify, I also know that it is a Windows 7 problem, as Spotify IMHO should not be able to slide the BONE down. It ofc may also a driver problem.

    Now, this isn't my real question however. Is that after the reboot, I have no Audio output device. I tried:

    Reset

    Uninstall and reinstall the driver for my motherboard (Asus) provider

    Uninstall and reinstall the driver

    My motherboard (Asus) provider and restart

    Uninstall, reboot, and reinstall the driver

    My motherboard (Asus) provider

    Uninstall, reboot, and reinstall the driver

    My motherboard (Asus) provider and restart

    Uninstall and reinstall the driver for my audiochip provider (Realtek HD Audio)

    Uninstall and reinstall the driver

    of my

    audiochip provider (Realtek HD Audio) and restart

    Uninstall, reboot, and reinstall the driver

    of my

    audiochip provider (Realtek HD Audio)

    Uninstall, reboot, and reinstall the driver

    of my

    audiochip provider (Realtek HD Audio) and restart


    Plug a USB headset to see if it works, and installed the entry-part ok (MIC) but not the part of output (headphone)




    None of these actions has solved the problem told me there is a problem of underlying Windows 7 behind her, I hope a driver school can I reinstall without reinstalling the entire computer, because francly that feared.


    And for the record, this entry form field does very well in chrome ^^


     

    Tried Microsoft FixIT 50131 http://support.microsoft.com/kb/948481
    Did not work
    Tried following http://support.microsoft.com/kb/936212
    Cannot use a restorepoint since I have not that far behind (3 October 2010)
    Sfc/scannow yealded running:
    C:\Windows\System32>sfc/scannow
    Start scanning system.  This process will take time.
    Start of the phase of verification of the scanning system.
    Full check of 100%.
    Windows resource protection found corrupt files but was unable to solve some of them.
    Details are provided in convertible bonds. Journal windir\Logs\CBS\CBS.log. For example
    C:\Windows\Logs\CBS\CBS.log
    System file repair changes will take effect after the next reboot.
    Restarted... And it works!
    Thank you MS for this service. Even if I found the problem myself, I wouldn't have without this forum.
    <3>

  • Cannot create a system under Vista Home Premium SP1 Restore Point

    If I try to create a system restore point manually, I get the following error:

    The shadow copy provider had an unexpected error while trying to process the specified operation (0x8004230F)

    I rebooted, restarted the VSS service, but still no luck. Someone at - he found a solution to this short error reinstall Vista?

    Hello

    Check the fix here as it is similar:

    Difficulty 0 × 8004230 C error in Windows
    http://www.mydigitallife.info/2008/06/27/fix-0x8004230C-error-in-Windows/

    -----------------------------

    Also that to help clear corruption and repair/replace damaged/missing system files:

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -----------------------------

    You could try to remove and rebuild your region ShadowCopy.

    How to create a Vista System Restore Point
    http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
    How to turn System Restore on or off in Vista
    http://www.Vistax64.com/tutorials/66971-system-restore.html

    Adjustment of the amount of disk space, System Restore uses for restore points
    http://bertk.MVPs.org/html/diskspacev.html
    How to change how much Space System Restore can use
    http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html
    http://www.Petri.co.il/change_amount_of_disk_space_used_by_system_restore_in_vista.htm

    ShadowStorage vssadmin commands
    http://TechNet.Microsoft.com/en-us/library/cc755866 (WS.10) .aspx
    http://technet2.Microsoft.com/WindowsServer/en/library/89d2e411-6977-4808-9AD5-476c9eaecaa51033.mspx?mfr=true

    Guide to Windows Vista system restore
    http://www.bleepingcomputer.com/tutorials/tutorial143.html

    Expiration errors occur in Volume Shadow Copy service writers, and shadow copies are lost during
    backup and at the time when there are high levels of input/output
    http://support.Microsoft.com/?ID=826936

    A good utility:

    Explorer of the shadow - free
    http://www.ShadowExplorer.com/

    Hope these helps.

    Rob - bicycle - Mark Twain said it is good.

Maybe you are looking for

  • What is the name of this icon and how do I add it?

    Too bad I can't reach a very small screenshot of this icon; that would go a long way to help you identify for me. < hmm >? In any case, I have two different profiles that I use, and it has an icon on toolbar (applet-addon-thingy) that I find useful a

  • JPEG blurred when playing even after stop on image and rendering

    Hi, I have my encounter a problem with some JPEG images that I need to include in my edition. The original files are of good quality and the right size and what toFCP imported, they look fine and "tidy" in the timeline. As soon as I start to play, th

  • Broke a piece off mac pro

    Hi all I broke a piece out of my logic on Mac Pro 2013 Board (I circled it in pink in the picture below). Could someone please tell me what it is and if I should worry about replacing? So far the device still works. Much appreciate it.

  • Add programmatically to the annotation point by point to XY-Graph

    Hello I drew a picture of X and Y values in an XY graph continously .and I'd like the chart automatically write the value of Y beside the plotted points. Is it still possible to the XY graph? Concerning

  • Client DHCP Table

    I've got a WRT54GL router and in this table, my computer was 192.168.1.100, now it is 192.168.1.102. Is there anyway to go back to 100. solve allot of my problems in the event viewer. Windows 7 Home premium 64-bit.