Cannot create a system under Vista Home Premium SP1 Restore Point

Similar Questions

• Why 2 partitions of OS on HP dv9628 laptop computer under Vista Home Premium?

  I was just checking my wife of the older HP Pavilion dv9628nr under Vista Home Premium with 2 HARD drives.  I didn't even know he had 2 HARD drives.  I opened the case to make sure.

  Here is a screenshot of disk for system management.  I have a few questions:

  1. Why is there a system operating on each HARD drive partition?

  2 are 2 necessary and deleted maybe?

  

  Generally however, the C: drive is not always your primary. This may change if based on the installation program. The installer in this book, could be Raid. This is where the 2 drives are used to create a combined drive. Based on the laptop being adverstised as a drive of 240 GB, but with 2 120 GB drives in it. This is most likely how it was setup. To know for sure you'd have to check to see if this feature is enabled in the BIOS.  Before you change any settings that you would like to make sure that you have recovery discs and backed up all the content. As having the OS on a single disk, you will need to disable Raid in bios and probably to format both drives. Then reinstall the operating system on you get (the one listed as C:, to avoid complications).

  This article (from ehow.com) can help with your Bios check, so that you can see if Raid is enabled and if you choose to disable. How to disable Raid BIOS

  I hope you're able to help.

• Cannot install SP2 on Vista Home Premium SP1 32-bit laptop - fails with error 0x800b0100

  Cannot install SP2 on Vista Home Premium SP1 32-bit laptop - fails with error 0x800b0100

  Cannot install SP2 (KB948456 - X 86) on a laptop Vista Home Premium 32 bit SP1 with all updates of Windows installed.  Quickly fails after it starts with error 0x800b0100 in the system log.  It's a fully verified SP2 full download.  I did a full chkdsk /r who fixed some issues.  Removed AVAST.  A running Fix It tool that fixes the problem with crypt services.  Scanned for malware with MRT.  Scanned for malware with MalWareBytes.  Scanned for rootkit with the McAfee tool.  Run the sfc/scannow, that signals mistakes.  The CBS. Partial contents of the LOG file (see KB972036):

  2014-03-18 11:59:36, CBS NonStart info: success, start, treatment not required, as expected.
  2014-03-18 11:59:36, info CSI CSI 3222024 (0x00312a08) store initialized 00000005
  2014-03-18 11:59:36, CBS Session info: initialized 30360259:262197728.
  2014-03-18 11:59:37, info CBS SPI: Parent KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18000 to SP2 package with install state 7
  2014-03-18 11:59:37, CBS Session info: 30360259:262197728 finalized.  Reboot required: no
  2014-03-18 11:59:37, CBS Session info: initialized 30360259:266957728.
  2014-03-18 11:59:38, CBS brand store corruption flag because of package info: Package_for_KB972036 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.2.0. HR: 0x800b0100
  2014-03-18 11:59:38, error CBS SPI: (CSPICbsClient::EnumPackages:156) cannot open the package hr = 0x800b0100
  2014-03-18 11:59:38, error CBS SPI: (CSystem::EnumerateCbsPackages:313) could not complete CBS package list hr = 0x800b0100
  2014-03-18 11:59:38, CBS Session info: 30360259:266957728 finalized.  Reboot required: no
  2014-03-18 11:59:38, info CBS SPI: could not enumerate the packages CBS
  2014-03-18 11:59:38, error CBS SPI: (GetLatestVersionFromCBSStore:135) ATL exception hr = 0x800b0100
  2014-03-18 11:59:38, error CBS SPI: (CSPCInstallTask::ApplicabilityScan:712) could not get the latest version of VistaSP2.

  KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.0.18005 hr = 0x800b0100 store

  System will not install KB972036 - States does not apply.

  Referring to 956702 KB notes that the http://go.microsoft.com/fwlink/?LinkId=167357 link that needs 32-bit is 64-bit.  In addition, it specifies SP2 - which obviously I do not have.  But I manually downloaded the apparently correct tool and ran it - get does not apply.

  Hi John,.

  Apologize for the delay in response. Please try the steps as described in the following article:

  Windows Update error 800b0100

  Back to us for assistance.

• Lost my software of fingerprint on Pavillion HDX9200 (under Vista Home Premium)

  Hello

  I've had arguments with my recently updated to the PersonaPersonal software version...

  He blocked me on some Web sites (or so I thought) and I decided to uninstall this software.

  Now I really miss being able to connect with a fingerprint.

  Where can I find the correct version of this software for my HP Pavillion HDX9200 that can run under Vista Home Premium?

  Thanks for your help!

  You must install the fingerprint sensor driver and software separately. Here are links to information and download:

  AuthenTec AES2501 Driver fingerprint sensor:
  FTP://ftp.HP.com/pub/SoftPaq/sp37501-38000/sp37920.exe

  DigitalPersona Fingerprint Software for Microsoft Windows Vista (32-bit):
  FTP://ftp.HP.com/pub/SoftPaq/sp40001-40500/sp40206.exe

• I'm unable to load the microsoft KB 2378111 security update. I'm under Vist Home Premium. I get the error code 80070020

  I'm unable to load the microsoft KB 2378111 security update. I'm under Vist Home Premium. I get the error code 80070020. I tried safe mode, but no luck so far

  Hello

  You are supposed to try it in "Safe Mode with network"; not 'Safe Mode'.

  You need a cable connection; no wireless using this method.

  Start method 3, etc at this link if top is not solve:

  "Error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates.

  http://support.Microsoft.com/kb/883825

  {Moderator note: Thread is placed in the appropriate forum}

  See you soon.

• Windows Vista Home Premium SP1 - multiple windows program or service failures after Windows Update June 17, 2011

  I have Windows Vista Home Premium SP1 (I think that SP1 anyway). Last night June 17, 2011, update of Windows installed an update or updates. Now, Windows Explorer, Internet Explorer, Windows Installer, Windows Sidebar, Panel, Windows Update and other Microsoft programs all fail. I get messages with various error codes. A message is 'class not registered '. I tried a restore to a previous restore point, but apparently the only restore point is the one made after the update. What can I do here? I know that I can always restore the factory image (Dell), but I'd rather not if I can help it.

  Hi doc,

  Method 1:

  You can try to repair aStartup if it is included in the system recovery options provided by the manufacturer of the computer or start from the disc for Installation of Windows Vista.

  Startup Repair: frequently asked questions

  What are the system recovery options in Windows Vista?

  Method 2:

  Alternatively, you can try to start a disk check and check.

  You can view the following link to perform a disk check:

  Check your hard drive for errors

  Note: When you run the disk check, there are chances of losing data if you can take a backup of important data before you run checkdisk.

  Hope this information is useful.

• Bluetooth - HP Touchsmart IQ772 Vista Home Premium SP1 software license file

  A couple of weeks, I installed Driver Max and update the outdated drivers, blutooth, among them, identified by Driver Max, on my HP Touchsmart IQ772, Vista Home Premium SP1.  Since last week, I get this message every time I have log on or restart my computer. File not found Bluetooth software license. [2]. what this means and how do I stop this happening again?

  Thank you.

  I had the same problem after a registry cleanup on my touchsmart iq518a, don't know why it worked, but I fixed it by clicking programs and features in the control panel and uninstall the program "HP bluetooth." Everything still works perfectly and that the annoying message is no longer happens.

  Hope this helps

  Carpet

  Message edited by Knobby_103 on 04/24/2009 15:03

• Windows Vista Home Premium SP1, NEVER been able to update

  I have problems with the update. I've never been able to update Windows since I bought this computer in September 2009.
  I have Vista Home Premium SP1 (was pre installed)
  I have CA Security Center
  I've also tried the auto detects in the LAN configuration but still does not. Also turned and on the update command in the command prompt.
  Does anyone else have an idea? It is slowly driving me crazy and I should have settled this long time.
  Please I need your help

  Thanks Ness

  Have you tried the methods of resolution 1 and/or 2 in http://support.microsoft.com/kb/900936 yet?

  If still no joy, try to do a Reset by http://support.microsoft.com/kb/971058. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Vista Home Premium SP1 NEVER been able update error 8024402C

  I have problems with the update. I've never been able to update Windows since I bought this computer in September 2009.
  I have Vista Home Premium SP1
  I have CA Security Center
  I've also tried the auto detects in the LAN configuration but still does not. Also turned and on the update command in the command prompt.
  Does anyone else have an idea? It is slowly driving me crazy and I should have settled this long time.
  Please I need your help

  Thanks Ness

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Can I extract "Chess Titans" of a laptop under 'Vista Home Premium' on a storage key and then play on a HP NetBook running Windows 7 STARTER operating system?

  Is it possible to extract "Chess Titans from a laptop Gateway running Vista Home Premium at a stick of storage and then play the game, on a HP Netbook, running Windows 7 STARTER? Need help!

  Hello
   
  You cannot extract Chess Titans of a Gateway laptop and put it on windows 7 starter edition
  Ttitans of chess is integrated into the operating system and cannot be installed outside.
  Chess Titans is available in editions of Windows 7 premium
   
  See the link
  Learn more about the games in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/learn-about-Windows-games

• error 0 x 80070246 when you try to install Vista Home Premium SP1. "Missing manifesto" and "Payload missing file" CheckSUR.log errors, running System Update Readiness too.

  I get 0 x 80070246 errors when you try to install SP1 for Vista Home Premium.

  After you run the system update readiness tool, I found the following errors in my CheckSUR.log

  =======================================================
  Preparation of control system was updated.
  Binary version 6.0.6002.22202
  Package Version 6.0
  2009-10-09 19:13

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store
  (f) clear CSI missing 0x00000002 WinSxS\Manifests\x86_microsoft-windows-msxml30.resources_31bf3856ad364e35_6.0.6000.16386_en-us_37881fc949e23021.manifest x86_microsoft-windows - msxml30.resources_31bf3856ad364e35_6.0.6000.16386_en - us_37881fc949e23021
  (f) CSI Payload file missing 0 x 00000000 jscript.dll x86_microsoft-windows-writing of scripts - jscript_31bf3856ad364e35_6.0.6002.22146_none_852abf080d834b3e

  Summary:
  Seconds executed: 1221
  Found 2 errors
  CSI shows lack Total count: 1
  CSI Payload file lack Total count: 1

  Unavailable repair files:
  winsxs\manifests\x86_microsoft-Windows-msxml30.resources_31bf3856ad364e35_6.0.6000.16386_en-us_37881fc949e23021.manifest

  =======================================================

  The newspaper CBS.log itself has several types of mistakes, too.  Here are some samples:

  -Errors 'M²;

  2009-10-09 21:10:27, info CBS SPI: from SPInstall
  2009-10-09 21:10:27, info CBS SPI: could not start the etl newspaper.  Continue without.  HR: 0 x 80070020
  2009-10-09 21:10:27, info CBS SPI: wave 0 detected
  2009-10-09 21:10:27, info CBS SPI: wave 0 installation. Subset of LPs taken in charge.
  2009-10-09 21:10:27, info CBS SPI: spent before due diligence
  2009-10-09 21:10:27, info CBS SPI: wave 0 installation. Subset of LPs taken in charge.
  2009-10-09 21:10:27, info CBS SPI: M² is not included in
  2009-10-09 21:10:27, error CBS could not initialize wrapper M²
  2009-10-09 21:10:27, error CBS could not define M² by default LCID of the system value

  -"Could not find the CixTarget Molok" errors.

  2009-10-09 21:29:25, CBS Plan info: package: Package_6_for_KB954366 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.3, updated: 954366-50_neutral_GDR, current: installed, pending: the default start: installed, planned: installed, targeted: installed, limit: installed, selected: default
  2009-10-09 21:29:25, error could not find the CixTarget for container package_for_kb954366_server ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.3.cat
  2009-10-09 21:29:25, DpxException hr = 0 x code 80070002 error = 0 x 020109
  2009-10-09 21:29:25, error could not find the CixTarget for container package_for_kb954366_sc ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.3.cat
  2009-10-09 21:29:25, DpxException hr = 0 x code 80070002 error = 0 x 020109

  -"ILLEGAL_CHARACTER" and more "Sqm" errors-

  2009-10-09 21:30:04, error CSI 00000022@2009/10/10:01:30:04.150 (F) d:\longhorn\base\lstring\lblob.cpp(2217): native STATUS_ILLEGAL_CHARACTER error of the function RtlTranscodeLBlobs expression: __rv. UcsCharacter! = (0xffffffff)
  [gle = 0 x 80004005]
  2009-10-09 21:30:21, error CSI 00000023 (F) HRESULT_FROM_WIN32 (582) #489176 # to Windows::ServicingAPI:CCSITransactionAnalysis_ICSIInventory:EnumDeploymentReferences(flags_=_00000003,_tlcid_=_@0x655fac0,_pszSubscription_=_(null), pszCodebase = (null))
  [gle = 0 x 80070246]
  2009-10-09 21:30:21, CBS WER info: generate report of failure for the package: VistaSP1-KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.0.18000, status: 0 x 80070246, source of failure: other CBS, start state: 0, target State: 4

  
  2009-10-09 21:30:26, information CBS Exec: comprehensive treatment.  Session: 30034248:1278646622, package: VistaSP1-KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.0.18000, hr: 0 x 80070246
  2009-10-09 21:30:26, State of the information system sleep restored CBS block: 0x80000000
  2009-10-09 21:30:26, CBS Session information: 30034248:1278646622 finalized.  Reboot required: no
  2009-10-09 21:31:30, CBS briefing: initialized 30034249:1690541326.
  2009-10-09 21:31:30, error CBS SPI: cannot write SQM data flow for the package status
  2009-10-09 21:31:30, error CBS SPI: cannot write SQM data flow for the package status
  2009-10-09 21:31:30, error CBS SPI: cannot write SQM data flow for the package status
  2009-10-09 21:31:31, error CBS SPI: cannot write SQM data flow for the package status
  2009-10-09 21:31:31, error CBS SPI: cannot write SQM data flow for the package status
  2009-10-09 21:31:31, CBS Session info: 30034249:1690541326 finalized.  Reboot required: no
  2009-10-09 21:31:31, error CBS doesn't have value of M² for the time of the scene
  2009-10-09 21:31:31, error CBS doesn't have the m value for the build number
  2009-10-09 21:31:38, CBS Session info: 30034249:748895326 finalized.  Reboot required: no
  2009-10-09 21:31:41, info CBS SPI: cannot install MS using the user interface.  HR 0 x 80070246
  2009-10-09 21:31:41, info CBS SPI: SPInstall terminating, return code 0 x 246
  2009-10-09 21:31:41, error CBS didn't M² value for parameters
  2009-10-09 21:31:41, error CBS failed to set exit code value M²
  2009-10-09 21:31:41, error CBS didn't M² for the SKU value
  2009-10-09 21:31:41, error CBS doesn't have the m value for the build number

  ------------------------------------------------

  I don't understand exactly how errors in the two newspapers are related, but my opinion is that, if I can solve my CheckSUR.log errors, CBS.log errors will disappear to, and then I might even be able to install SP1.

  Any help that can be provided would be greatly appreciated.

   

  1 person needs an answer

  For what is interesting, what I ended up doing to solve my problems was to re - install Vista with the 'upgrade' option, so I don't lose any of my files or desktop settings...

  After that, I had a few problems with my OS reinstalled with several (80 +) updates, SP1 and SP2 from catching up.  But overall these problems were minor compared to it, that I lived just to fix some missing files.

• Cannot install Update 938371 on Vista Home Premium because of the error 800b0100.

  Using Windows Update and stand-alone update, I can't install the Update 938371 (which I believe is a sine qua non for SP1) on my Vista Home Premium laptop.

  When I try to do, I get an error 800b0100. I tried the system preparation tool, I even tried the fix XP (for re-registration of dll), but doesn't seem to work.

  My laptop is an Asus G2 with 3 GB of RAM and an Intel Core 2 Duo T9300 processor (both at 2.5 GHz), if this can help.

  Thanks in advance for your advice.

  Hi AVARiCE91,

  Welcome to the Microsoft Answers community.

  This is a reprint of this update. The republished version includes performance improvements and additional reliability that apply to the Windows Vista-based systems and Windows Vista Service Pack 1-based.
  For more information visit http://support.microsoft.com/kb/938371
   
  Try these one by one and check below:

  Method 1: Reset windows update components.

  To reset the Windows Update components visit the link below and click on solve this button / follow the given steps to repair it yourself.
  http://support.Microsoft.com/kb/971058

  Method 2:
  
  I suggest you to temporary disable firewall and security programs. Then try to install the update in clean boot mode.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Steps to switch to clean boot on a computer.

  1. click on start, type msconfig in the search box and press ENTER.
   
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
   
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, now try to install the update.

  http://support.microsoft.com/kb/331796 . In addition, see the section on how to restore your computer to a Normal startup mode.

  For more information visit:
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
   
  Hope this information is useful.
  Let me know if it worked.
   
  Thank you, and in what concerns:
  Umesh P - Microsoft Support

• I have AutoCAD 2002 a 32-bit program cannot install on my Window Vista Home - Premium 64 bit OS. Can someone help me, please?

  I have AutoCAD 2002, a 32-bit program, I can't install it on my computer which has Windows Vista Home - Premium 64 bit OS.
  Can someone help me, please?

  Hi JohnMcLarnon,

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description, it looks like you can not install AutoCAD 2002, he would be grateful if you can answer this question in order to help you further.

  1. what happens when you try to install, summers - get you any error message or error code?

  2 is the issue limited only during installation AutoCAD?

  3. have you made changes on the computer before this problem?

  I suggest you to see the steps in the following Microsoft article and check if it helps.

  Solve problems with programs that cannot be installed or uninstalled: http://support.microsoft.com/mats/Program_Install_and_Uninstall?wa=wsignin1.0

  Troubleshoot installing or uninstalling programs: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-installing-or-uninstalling-programs

  Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  If you have any other questions or you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Cannot obtain replacement disks of Vista Home Premium.

  I have a PC that came with a set of disks in the OS (Vista Home Premium) of the desktop type the Gateway FX. Technical support Gateway wants to load more that a new license cost complete and me have to wait a month to get them. Seeing as how I've already paid for the license, it's completely unfair. Can I get a disk of Microsoft (or anyone), if I have my license key? I understand that I must pay a nominal price for the physical disks.

  Thanks in advance,

  Mikey

  Hello

  If it never came with disk recovery, gateway must provide you with another way to reinstall the operating system.

  If they didn't they break their agreement with Microsoft.

  Here is the information on the bridge to access the recovery Partition on your hard disk to reinstall Vista:

  "Full factory recovery"

  http://support.gateway.com/s/software/MICROSOF/Vista/7515418/7515418su531.shtml

  ""Software Information " "

  http://support.gateway.com/s/software/MICROSOF/Vista/7515418/7515418asi.shtml

  There is no Windows Vista downloads available from Microsoft.

  If the above does not work, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  See you soon.

• How to create an ERD for Vista Home Premium?

  I just bought a new laptop and that seems to be the case a lot, I did ' t get a drive in Windows vista with it and need to know how to create a repair disk. Can you help me?

  If this is a * new * portable, contact the manufacturer / who you bought it and ask them to provide you with a * real * Windows Vista Home Premium DVD.

  If not - is there not a built-in method for the creation of a defined recovery/restoration?

  Finally... He has this option:
  http://NeoSmart.net/blog/2008/download-Windows-Vista-x64-recovery-disc/
  (Gleemed from: http://www.howtogeek.com/howto/windows-vista/how-to-make-a-windows-vista-repair-disk-if-you-don ' t-have-one / )