Shape the strange behavior - Bug?

Similar Questions

• Refresh the strange behavior of factor ahead

  Hello world

  I had the strange behavior of refreshment early feature.

  Here is my configuration:

  <> cache-config

  < default >

  POF < serializer > < / serializer >

  < system-property="tangosol.coherence.socketprovider"/ socket-supplier >

  < / default >

  < cache-system-mapping >

  <>cache-mapping

  < name of cache - > sample < / cache-name >

  < scheme name > expand-nearly-distributed < / system-name >

  < / cache-mapping >

  < / cache-system-mapping >

  <>- cached patterns

  
  

  < about plan >

  < scheme name > expand-nearly-distributed < / system-name >

  < avant-regime >

  < local plan >

  < high-units > 20000 < / high units >

  < expiry time > 10 s < / timeout >

  < / local plan >

  < / avant-regime >

  < back-plan >

  < distributed plan >

  distributed < system-Ref > < / plan-ref >

  < / distributed plan >

  < / back-plan >

  < invalidation strategy > all < / invalidation strategy >

  < / near-plan >

  < distributed plan >

  distributed < scheme name > < / system-name >

  < service name > - sample < / service-name >

  thread < number > 20 < / thread count >

  < support-map-plan >

  < reading-writing-support-map-plan >

  < internal-cache-system >

  < local plan >

  < expiry time > 10 s < / timeout >

  < / local plan >

  < / internal-cache-system >

  < dumps-plan >

  schema < class >

  < class name - >

  com.sample.CustomCacheStore

  < / class name >

  < / class-system >

  < / dumps-plan >

  < refreshment-ahead-factor > 0,5 < / refresh-ahead-factor >

  < / reading-writing-support-map-plan >

  < / support-map-plan >

  < autostart > true < / autostart >

  < / distributed plan >

  < / cache-plans >

  < / cache-config >

  and if I ask that my service with a period of 6 s (10 s * 0.5) seconds, all are very good. I have no delay in response (with the exception of the first), but if I change such as a period of 3 seconds, then I start getting times every 10 seconds. I have no idea why this is happening. It seems that if I ask my service before the predictable period (from 5 to 10 seconds) asynchronous loading can't even though after that I ask once again. Y at - it explanation of it and how do I get around this behavior?

  Thank you

  The problem has been resolved. The reason why I have such a situation, it is that this front regime didn't notify the regime back because of the same expiration date. In a few words, to use the features of refreshment in advance with near cache you will need to set the expiration time of avant-regime equal to the soft-expiry time (in this case, it will be 10 s * 0.5).

• Frustrated by the strange behavior of the command SET up FIRST HP!

  I tried to define a function using the command SET the. The function is F = G * M * m / r ^ 2. No matter what I try, I still get the same generic error: INVALID INPUT. I went to the guess, user manual, half a page of information about the command SET. Better nothing, but far from what you would expect if the manual is YOUR main source of information on how to use the calculator. In the first instance, an error, here's what I discovered:
  
  (1) name of the function cannot be long 1 letter. They can combine the capital letters, small letters and numbers...
  (2) variable must be UPPERCASE
  (3) variables can start with a letter and followed by a unique number. ONLY THAT, nothing more
  
  Can someone, confirm please?
  
  It is quite limited. So now, instead of the calculator not work for me I have to work for it. This is the formula I: F = G * M * m / r ^ 2 and that's what the calculator would accept in the screen SET: F12 = G * M1 * M2/R ^ 2, see figure 1. Quite annoying, but I can leave with it.
  
  As you know, G is the gravitational constant: 6.67384 x 10 ^-11.  The calculator is supposed to to remember, so why type it again?  I went to CASE view, called my function, putting fake numbers, just to try it, had G of MAJ > units > Const > physics.  This is how my edit line looks like: F12(6.67384E-11,100,300,25)... See figure 2. Guess what? An ERROR GENERIC, no idea of what the calculator don't like on this subject. After a while, I discovered he does not like the E in 6.67384E - 11, she she likes 6.67384e - 11, and then it throws another error (Bad arguments number) see figure 3. I check everything, it looks all right.
  
  I decided to try my LUCK in the main screen. Everything works perfectly. He doesn't get complaint even the 'E' in G, and I get the result expected (figure 4).

  I went back to the screen set and passed under the name of the F12 function to Forc, put the numbers again, MAGIC, now this market (see figure 5).  So, after all, it seems to be the calculator do not like the numbers the function name, but he didn't complain. Come on guys, you do not buy a top of the calculator online to go through this torment.
  
  Can someone tell me what is the reason for the bizarre behavior?

  Hello

  DEFINE functions MUST respect the rules of the home screen in every way shape and form. For example, the variables must be valid system variables...

  DEFINE function names cannot collide with existing variables/functions names, which is why you cannot use single past uppercase to name...

  If you want to use the names of other variables that the pre sets, you will first need to create them. Betai you can create them in CASES, it is best to create in the House because, as a general rule, it is best NOT to mix things ca and home (it is much slower and is more likely to cause disorders). To create a new variable home user, just assign a value to a variable as in abc: = 5 (or 5-> abc-> where is the arrow of the sto)... You will be asked if you want to create the variable. answer Yes and you're...

  Cyrille

• project and the strange behavior of FPGA v

  I had a strange problem with my main project and the FPGA inside screws.

  It seems than a recent revision/replacement of a part of the code (replaced subVIs with the latest revisions with different names) prompted the VI to load screws unused when I save it.

  The story gets more strange because I can create a totally blank FPGA VI within the project and it still load the same SubVIs when I save it.

  I can save repeatly the VI and the same (now nonexistent) subVIs will be charged each time before the economy can complete

  The SubVIs are not displayed in the VI hierarchy and are no longer in the project at all - but are always loaded by a VI that does no resemblance or relationship to the original VI.

  Is my project completely broken?

  If Yes is there a way to fix without starting from scratch ?

  Thanks for any help in advance

  Dan

  you have a screw under the fpga target who could still make reference to the missing subvis? If the project think that you still have a dependency on these missing subvis, they will appear (with a warning that I think) to under the item "dependencies" of the target fpga. When you save a vi in the context of fpga, labview support the other screws in the same target to ensure they are still valid and up to date of the accounting information. If you have any other screws which are still divided on disc (even if they set up on top of the load), you will have to wait until they take whenever you save the vi in question.

• Strange behavior of the Animation

  Hello guys.

  I'm fading in the textArea 3 and 3 labels State 'default' to 'addRecommend' and fade out the text box and labels seeOther State to addREcommend. The defautl-> addRecommend works very well. However, addRecommend-> seeOther

  show "a text box" (which is not included in State seeOther) and kill my "add to database button" (which is in a State of seeOther).

  If I delete detailText and details of my transition melted, everything will work, but I need to have my detailText and fade out too much in detail. If I do not explain my question, please copy my code and paste it into your flex. I spent 5 hours to debug it but no luck. I have really really grateful if someone could help me.

  < fx:Script >

  <! [CDATA]

  protected function add_clickHandler(event:MouseEvent):void

  {

  currentState = "addRecommend";

  / / addRecommendMove.play ();

  }

  protected function seeOther_clickHandler(event:MouseEvent):void

  {

  currentState = "seeOther."

  }

  ]]>

  < / fx:Script >

  < s: states >

  < name s: State = "default" / >

  < s: State name = "addRecommend" / >

  < s: State name = "seeOther" / >

  < / s: states >

  < s:transitions >

  < s:Transition toState = "addRecommend" >

  < s:Sequence >

  < s:Parallel >

  < s:Move target = "{add}" / >

  < s:Resize target = "{add}" / >

  < s:Move target = "{seeOthers}" / >

  < / s:Parallel >

  < s:Parallel >

  < s:AddAction target = "{[yourname, username, recommendCityLabel, recommendCity, detailText, detail]}" / >

  <!-if delete detailText and detail, the transition fade will be fine... but I need them to fade our and bland in...-->

  < s: bland target = "{[yourname, username, recommendCityLabel, recommendCity, detailText, detail]}" / >

  <!-if delete detailText and detail, the transition fade will be fine... but I need them to fade our and bland in...-->

  < / s:Parallel >

  < / s:Sequence >

  < / s:Transition >

  < s:Transition toState = "seeOther" >

  < s:Sequence >

  < s:Parallel >

  < s: bland target = "{[yourname, username, recommendCityLabel, recommendCity, detailText, detail]}" / >

  <!-if delete detailText and detail, the transition fade will be fine... but I need them to fade our and bland in...-->

  < / s:Parallel >

  < s:Parallel >

  < s:Move target = "{add}" / >

  < s:Move target = "{seeOthers}" / >

  < / s:Parallel >

  < / s:Sequence >

  < / s:Transition >

  < / s:transitions >

  < s:Label color = "#000000".

  x="10"

  y="60"

  ID = "YourName".

  fontSize = "13".

  fontFamily = 'arial '.

  text = "Your name" includeIn = "addRecommend" / >

  < s:TextInput x = "10" y = "75" width = "50%" paddingLeft = "10" id = "userName" includeIn = "addRecommend" / >

  < s:Label color = "#000000".

  y="110"

  x="10"

  fontSize = "13".

  fontFamily = 'arial '.

  ID = "recommendCityLabel".

  text = "Recommended City" includeIn = "addRecommend" / >

  < s:TextInput x = "10" y = "125" id = "recommendCity" width = "85%" includeIn = "addRecommend" / >

  < s:Label color = "#000000" x = "10" y = "155".

  fontSize = "13".

  ID = "detailText" <!-if I add this label to my transition melted, the strange behavior->

  text = "you can add details!

  fontFamily = 'arial '.

  includeIn = "addRecommend" / >

  < s:TextArea = "180".

  x = "10".

  paddingLeft = "10".

  ID = "detail" <! - if I add this textArea for my transition melted, the strange behavior too - >

  Width = "90%" height = "160" includeIn = "addRecommend" / >

  < s:Button id = 'Add '.

  x="10"

  y="60"

  y.addRecommend = "350"

  width = "210".

  width.addRecommend = "150"

  height = "35".

  fontWeight = "bold".

  fontSize = "12".

  fontFamily = 'arial '.

  toolTip = "recommend your favorite places.

  label = "add your recommendation."

  label.addRecommend = "Add to database"

  Click = "add_clickHandler (Event)" "

  />

  < s:Button id = "seeOthers".

  y="105"

  x="10"

  y.addRecommend = "400"

  width = "220".

  height = "35".

  fontWeight = "bold".

  fontSize = "12".

  fontFamily = 'arial '.

  toolTip = "see recommendation of others.

  label = "see other recommendations.

  Click = "seeOther_clickHandler (event)" / >

  Hello

  I had a look at these, I think that the provision itself was a bit wonky, I enclose the code in a link like this forum tends to eat code that doesn't help when you're trying to look at the code.

  http://gumbo.flashhub.NET/Jerry/ source included
  You have the basics of work, but to avoid confusion in the States and the code, I suggest you try to group your objects to display relevant to the effects of transition, it is easier to control and maintain.
  On a side note use you designview in the ide to see how States will look, this tool will be of great help while you learn, ignore anyone who tells you not to use designview, it is a page layout tool and works well for these types of tasks.
  David.

• strange behavior

  Hello

  I have a strange behavior on the main screen of my application.

  My screen looks like this:

  1, 2, 3, 4 and 5 are bitmap with navigation button, click scope.

  I have a separate Thread for processing and this X thread updates the content of the label and label B.

  Whenever the thread call X function is update the function labels are running label.setText (newtext) on both labels.

  Stange behavior:

  When the x thread updated, the text of the labels (via the function Y) the emphasis is on button bitmap 1,2,3 or 4, the text of labels disappears and the screen looks like this:

  

  If we move to the development for bitmap button 5 or ListField labels updated successfully and the screen looks like this:

  

  I checked on debug only when the labels are updated that the text is not null.

  You have some ideas on what is the cause?

  Best regards

  Hello

  I found the solution for the strange behavior. I added a "HFMst.ivalidate ()"; on the function Y and that fixed the strange behavior.

  Thks simon_hain and arkadyz for your help.

• Can help or explain this strange behavior?

  Hi guys,.

  I'm just starting to write a script to extract our VM guest IP information before updates.

  I ran into a strange error that I can't move, or explain, and I was wondering if someone could help me.

  This script (pass vmhost objects to him) translates to display the info of the physical NIC (device and mac), but no info vnic (unit only). If I change the order arounf for the vnic info is displayed first, then the info vnic deisplays correctly (device, IP address and mask), but the bear info is not (only peripheral poster, not mac).

  Begin

  {}

  Process of

  {

  If

  ($_) {

  $_ . Name

  $temp = $_ | get-opinion

  Write-Host " "

  Write-Host "Physical NIC"

  $temp. Config.Network.Pnic | Select device, mac

  Write-Host " "

  write-host "E-cards"

  $temp . Config.Network.Vnic | , Select peripheral, {$_. spec.ip.ipaddress}, {$_ }. spec.IP.SubnetMask}

  Write-Host " "

  }

  }

  I know there are a lot of scripts that do this, so please don't point me to them. I am trying to learn. I know also, aspect is ropey, I'll sort that later. Now, I'm only after the reason for the strange behavior.

  Thanks in advance

  Phil

  You confuse output formatter by sending different types of objects.

  The trainer focuses on the first object to determine how to format for the output of the screen.

  Try adding the out-default cmdlet after both of the Select-Object cmdlets you have in the service.

  $temp.Config.Network.Pnic | select Device, mac | Out-Default

  and

  $temp.Config.Network.Vnic | Select peripheral, {$_.spec.ip.ipaddress}, {$_.spec.ip.subnetmask} | Out-Default

  The out-default cmdlet actually kind of redefines output formatter.

• Strange behavior of the browser blocks SQLDEV DM

  Hello

  I feel some strange behaviors in the browser of Datamodeler.

  After the opening of my model

  I have doubleclick in the window of the browser to fetch a few properties of the index:

  Drawings and models > MyModel > relational models > my RelModel > models > Oracle Database 10g > Tables

  So far, everything that happens.

  -I can select the tables and

  -doubleclicking shows the properties of the table.

  -I can scroll vertically

  -Select other tables

  -open and close the subtree of this physical tables

  Now, as soon as I click on any 'more' in the physical tables (for example, the index node or node of the plate) the browser "tri-de gel".

  The tree is distorted, scrolling seems erratic and it is impossible to select. Most of the time the main menu is also distorted.

  If I make the browser window, most of the time I'm able to hit the "file > save" from the menu. The model seems to be registered properly.

  No damage seems to have been done to the template on the reopening

  I'm on Windows 8 pro with the 64-bit version of datamodeler version 4.1.2.895 (from datamodeler - x 64 - 4.1.2 - 895.zip)

  Any ideas anyone?

  any response greatly appreciated.

  concerning

  Wouter

  Hi Wouter,

  I'm sorry, this is a bug and we are preparing a new version with this bug fixed.

  If I make the browser window, most of the time I'm able to hit the "file > save.

  Close the Data Modeler (X - close button in the upper right corner) and it will ask to save the drawing it is changed.

  Philippe

• Strange behavior of cropping &amp; other bugs

  Hello. My copy of Photoshop CS4 has recently started a strange behavior. I'm working on a 17 '' Mac Book Pro to end 2007 running OS 10.6.4.

  This is a screenshot just before cropping in image that I train.

  

  This is the same area after knocking back the harvest indeed. This tiny spec is what remains of my image.

  If I expand this area to 3200%, that's what I see:

  I've never met this before. I restarted Photoshop. I restarted the computer. I was in 20 GB limit of my hard drive, so I released 40 GB of storage space to backup the old files on DVD. My computer is a maximum of 4 GB or RAM. WTF? A bug perhaps related but somewhat independent, with that I had business since empty menu windows in Illustrator and Photoshop in my series of CS4. Opening the window hides in the PS and the swatches in Illustrator and PS resulted in empty menu windows. (The window is there, without tools or controls inside. Just grey.

  Do I need to remove and reinstall or something? Applications can get corrupted?

  Has anyone seen anything like this before?

  Thanks in advance for your thoughts!

  D

  Check the options for the crop tool bar.

  You entered a resolution, and the acreage resulting something tiny, resampled comes from the selected area.

  The tool to reset, or simply to clear the resolution field.

• 2.1 RC1 - strange behavior when you change the data in the table

  I recently found a new strange behavior of the SQL Developer. On a small table or a table with a filter where all the data is loaded, but not all lines can be displayed on the screen, trying to change the data in the table. When I confirm the editing with the key enter, Developer SQL jumps always until the end of the data. Quite confusing and boring. The cursor seems to remain in the field that I have edited, then moving upward or downward line force SQL developer to this line.
  
  Appears not to be the case when all the data are loaded instead of punch, but if you force Developer SQL to load all the data, I can reproduce this strange behavior.
  
  Sven

  Bug 9205959 is fixed.

  -Rambeau

• I get a strange behavior of the bar tabs and the address bar in Firefox 29,0 for Mac.

  I just installed Firefox 29,0 for Mac.
  I have a strange behavior of the bar tabs and the address bar with this new version.
  Instead of the address bar, I get two rows of symbols. And it is impossible to write anything in the address bar.
  (I add a screenshot, but I can't find a way to do it).

  Firefox has an RSS icon in the palette of the toolbar that you can drag a toolbar (but not on the location bar container).

  • Firefox menu button > Options/Preferences > toolbars
  • View > toolbars > customize

• Strange behavior with the function «Help in command line»

  So I do a little playing with the opening of the files compiled help (.chm) with the command-line help feature, and I saw a strange behavior when trying to index multi-level access keywords. According to the documentation, if you set the 'Key' operation, you can enter a value for ' string to search for "to access this section. The more precise help that:

  If this string contains a keyword index, the string must match the key of the index as it appears in the help index file. To access a topic with a multilevel index keyword, enter the keyword of the top-level index, a colon and the keyword of the second level index. Do not separate the elements with spaces. For example, a chain of error codes: GPIB jumps about a subject with a keyword of top-level index of error codes and a second level keyword index of GPIB.

  All right, seems simple enough. Except that when I tried, I couldn't work, even with the example provided. I tried the following simple test:

  

  Opens the help file, but it opens to this page, not to the page ' error codes: GPIB "non-descript. I saw this in 8.2 and 8.6. Anyone have any success with access to a multi-level keyword?

  Note - side

  Curiously, the Index for the help lvconcepts.chm file looks like this:

  

  In other words, the input index text is just "GPIB", but the text that appears in the keyword field is "codes error, GPIB. I'm curious to know how this was accomplished. I decompiled the lvconcepts.chm file and watched the .hhk file, and it is not immediately obvious to me. (By the way, if you try to use "error codes, GPIB" it does not either).

  Hello

  Please contact National Instruments!
  It is a very strange behavior.  I tested out and seen the exact
  same results you are experiencing.  This was reported to R & D (AUTO ID # 130246) for further investigations.
  From what I can tell the a possible workaround solution that we have documented
  in the post of root Canal.  I can't continue to look into this in order
  to see if there is no other workaround solution or a reason why it is
  run in this way.  Thanks much for the feedback!  If
  you have any other questions on this subject please post them here.
  Have a great day!

• Strange behavior of startup and cannot access the tools-&gt; options menu

  Since this morning my LV8 installation does not display the normal startup dialog box (allowing you to open the existing screws or open a new one), but doesn't that immediately opens a new VI.  If I close this new NC and then instead of back to the Startup dialog box it opens a second new (empty) VI.    Furthermore, I can't open the tools-> option menu from a façade of VI.

  I tried to repair the installation of the LV and when that does not work I went for a complete deletion and don't reinstall - still no joy!

  I also check that it is not user specific, so that when I login as a different user on the same PC, I get the same behavior

  Help - please!

  Hi AMHurrel,

  This seems quite strange.

  Have you changed anything on your installation?

  When you say you did a complete removal and reinstall, how?

  Here are the steps I follow:

  The following procedure removes the software Instrument National:

  1. turn off the computer and physically remove or disconnect all devices that you have installed on your system.
  This includes everything-PCI, ISA, USB, 1394-, or based on ethernet.

  2 turn on the computer and go through Add/Remove Programs (START"SETTINGS" control PANEL"Add/Remove Programs)
  and remove all OR related. As a general rule, if you remember, it is best to uninstall things in
  the reverse order in which they were installed. For example, if you installed LabVIEW, then NOR-DAQ, then the
  Internet developers Toolkit for LabVIEW, you must uninstall the Internet firstly, developers kit
  NOR-DAQ, then last LabVIEW.

  3. once everything has been deleted (don't be concerned at this stage if an item still appears in the)
  Ajouter/suppression of programs list after you remove it), close all programs and restart your computer.

  4. go to the START button in your operating system, choose RUN and type 'regedit '. This will open up the registry
  The Editor window. Go to the registry Menu and choose Export registry file. Select 'All' to the export range,
  and select a file name. This creates a backup of the registry in case a mistake is made when you remove the key.

  5. remove the following components of the registry in the Windows registry:

  HKEY_CURRENT_USER\Software\National Instruments remove the entire tree!
  HKEY_LOCAL_MACHINE\Software\National Instruments remove the entire tree!
  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Enum\PCI\ or \ISA and remove registry entries containing one
  keys with 1093 in them.
     
  Don't worry if one of these trees are not listed. Continue with the rest of the process.

  Note: You may need to change the security policies. In Windows 2000, 98, 95, NT, go to [regedt32] then
  Security > permissions. In Windows XP, you can change the security using Edit options > permissions in the
  Publisher of the registry (regedit).

  6. close regedit.

  7. make sure that you don't have your own screws or other files in the "C:\VXIpnp."
  "C:\Program NIUninstaller Instruments", or "C:\WINDOWS\nidaq" folders. If you do, copy them to a
  different location. If you are concerned about preserving old virtual tracks and your SCXI configuration.
  then save the file "C:\WINDOWS\niconfig.daq", too. Delete all folders and files mentioned above.

  Note: If you have Windows NT/2000, replace 'C:\Windows' with 'C:\WINNT' in the path listed above.

  8. save the attached file msiBlast.zip to your desktop.

  (a) extract the msiBlast.exe file from zip archive.
  (b) double click the downloaded msiBlast.exe file to run the executable.
  (c) choose the selection show only installers of NOR.

  (d) using select (Ctrl + left mouse click) of all National Instruments software that appears in MSIBlast.
  (e) press the button uninstall. This allows to uninstall all entries in register MSI of National Instruments.

  (f) Optional:
  The repair option will open the installer of National instruments and run the option fix in the installer.

  Maintenance mode will open the installer and allow the user to change the installation. To open the installation program indicate nothing in command line Arg? Dialog box.

  9. restart your computer.

  10. you should be ready to install your software. For the cleanest possible installation, first install all of your
  software application, such as LabVIEW, Measurement Studio development, etc. Perform a custom installation so that you can
  Install just the request WITHOUT DRIVERS EVERYTHING. Restart your PC after each installation request.
  Even if the installation program does not tell you to restart, it would probably be a good idea to do it anyway.
  Now install the software driver and follow the associated user manuals. Some older non-Plug-and-Play hardware
  must be installed before the pilot. Download the latest versions of the drivers that support your hardware
  She draws from our drivers and software updates (link below) and install them one by one, reset after each
  install.

  11. Lastly, stop and re - install your hardware. When you start back, he must be detected in MAX.

  NEITHER drivers link:- http://www.ni.com/softlib.nsf

  * Attached is msiBlast.

  You get an error message?

  Let me know what you think,

  Kind regards

• Strange behavior of the run LabVIEW VI 2013 LabVIEW 7.1

  I'm trying to extract some data hardcoded from old code LabVIEW 7.1 and decided to write a small program in 2013 of LabVIEW. The program opens a reference to a VI 7.1, search enums and call it with reference to all combinations of enums.

  Actually quite simple, but I've noticed that something is without work, as expected. The old screws have this enum called mode (0 = Manual, 1 = Auto), who is not connected to any connector and has a value default 1 = Auto.

  In LabVIEW 7.1, everything works as expected, but when I load this 2013 LabVIEW VI and execute it, without saving the file, it executes the case of 'Manual' rather than 'Auto '. I used a probe to check the value of mode in LabVIEW 2013 and the value is 1 = Auto, but he spends with the value 0 = manual box.

  This is just a simplified version of the screw, but the behavior is absolutely the same. The VI (LabVIEW 7.1) is attached. Try to load in 2013 of LabVIEW and run it. I don't have 2014 on my PC.

  

  Screenshot of running in 7.1 and 2013

  

  Any ideas? This happens because of the strange settings on my installation of LabVIEW 2013? Can you reproduce this?

  If you have a process already for execution programmatically these VI, what happens if you add to that and make something like a Vale put on the controls programmatically prior to execution of the VI.

• Strange behavior of the PNG with transparent background

  Hi all

  I am facing a strange problem on a request of my friends that I'm upgrading. The application is written in CVI2009SP1 and is already running on the customer's site. I am now adding several new features and made some changes in the application file UIR and all of a sudden all the images I have show a black background instead of transparency.

  The strange thing is that I see the images correctly in the editor of the UIR, the black background being shown only at runtime, no matter if debug or release.

  It is an example of wat I see:

  

  I tried to reload the image in control after checking transparency but the situation has not changed. The problem is that the images in. The other images, PNG format in. Format ICO show properly.

  I see this behavior in my office on both two machines wirth 2009SP1 for 2012SP1 development and execution. The same phenomenon occurs on the client PC runtime 2010SP1 and no IDE installed. If I run the original application with the UIR unmodified, transparency is properly managed. I'm not operated by program images, which are only decorative elements on the user interface.

  What can happen?