Share an editable file and the application to send to the editor

Similar Questions

• "I lost the top of my Web page that has"File"Edit etc and the toolbar with the House for 'House' and the arrow of" return to the last page. Does anyone know how to reinstall these? I'm obviously not computer savy.

  Missing once more, the blue band at the top of my Web page that has the file ',' Edit etc and the toolbar with the House for 'Home' and the arrow «back to last page»

  == My grandchildren's play about that.

  Press the Alt key to display the Menu bar, then open view > toolbars and select menu bar and the bar of Navigation, so that they have a check mark.

• I downloaded just standard CS6 for windows and that you do not have an .exe for the installation file. I have a 7z file and an application file that I used to extract the 7z files. I am now at a fixed support.

  I downloaded just standard CS6 for windows and that you do not have an .exe for the installation file. I have a 7z file and an application file that I used to extract the 7z files. I am now at a fixed support.

  Hello

  You must download the file [.7z] 1 and 2 [.exe] file. Once downloaded, keep both files in the same folder.

  Then run the .exe file and it will extract the CS6 Installer for you. With which you can install your software CS6.

  For CS6 direct download link: https://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  You can also check this link: https://helpx.adobe.com/creative-suite/kb/cs6-install-instructions.html

  In the case of additional assistance, feel free to contact support by calling/chat for cancellation requests and billing queries:

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  I hope it helps.

  P.S. If you use the adobe forums, please check useful/correct responses of staff or assistance, if there is.

  Concerning

  Ludo has

• WMM edition error message - ' cannot publish to the specified location. Check the source files and the location is still available and that there is enough disk space. »

  I made a movie of 30 minutes or more in WMM, some of the videos that I imported I had to convert to wmv, to import into WMM. Once I went to publish the movie, after the publication of about 1%, an error message pops up saying something like "cannot publish to the specified location. Check the source files and the location is still available and that there is enough disk space. "I have 8 GB of free space on my hard drive and I tried to burn a cd on a dvd, and save to memory stick, none of them have worked, the same message is displayed even if they have sufficient space available. There is no red x in the videos or photos that I imported, so no files are missing. Some files have been moved when they were converted, but the movie plays well in WMM.  I want to export to is in my documents is therefore always available. I spent hours trying to figure this out and I I still don't know what the problem with it! Help! I've also spent a lot of time to their conversion to avi to see if this helped and the same message appeared again.

  What is the format of your source of debtor files and how did you convert
  TO WMV?

  I can only imagine that you are using Vista Movie Maker 6?

  It's not really about the location... error messages can be very cryptic...
  The error that you mentioned usually appears when the source files in the project
  are damaged or are not fully compatible with Movie Maker and made
  in a movie file cannot continue. In addition, large complex projects can cause
  in this issue.

  In some cases, it may be possible to record in DV - AVI, during registration as
  . WMV fails: the following article explains how to save... Publish it in film...
  6 machine and the graphic link shows where the option:

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  The following chart shows where the DV - AVI option.
  http://www.Papajohn.org/IMGs/Vista-PublishToComputerChoices.jpg

  If the recording as long as DV - AVI fails... see the following articles:

  Movie Maker - problem resolution - "cannot record a movie.
  http://www.Papajohn.org/MovieMaker-issues-CantSaveMovie.html

  Windows Movie Maker error
  Cannot complete the Save Movie Wizard
  http://moviemakererror.blogspot.com/

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv
  Audio - wav, wma, wmv

  Sometimes, it can help if you are going to... Tools / Options / Compatibility tab...
  and uncheck all filters.

• How to call the css file and the images of our application...

  Hai,
  
  
  IM downloading a .css file and images in it that apex of the components shared , now how call the css file and the images of my request... Please tell me detailed...
  
  Published by: David on November 3, 2008 12:51 AM

  Hi David,

  Sorry, has not seen that you had started a new thread, so have answered this in 'undefined' is null (or) not an object " "

  Andy

• Y at - it an easy way to have a version number that the code VI has access to, and which is used as the version number for the executable file and the installer builds?

  Y at - it an easy way to have a version number that the code VI has access to, and which is used as the version number for the executable file and the installer builds? Now whenever I update my software I need to change the global variable where I store the version number, and then when I build I have in hand, open the properties and change the version number for the executable file and the installer. Is there an easy way to make these as all corresponding automatically?

  Have you tried a search? This question comes up a LOT. Here are the results of a search: http://forums.ni.com/t5/forums/searchpage/tab/message?location=Node%3A170&q=application+version#mess...

• I need to learn how to remove trojan my computer files and the registry.

  Original title: cleaning your pc

  I need to learn how to remove trojan my computer files and the registry. There is a financial has now attached ittibu or something. and how to remove the event source errors and all that is connected to this.

  If you make financial transactions online and feel your system has been compromised, the more experienced people will recommend wipe you your HARD drive and reinstall your XP from scratch, but that is not always possible and of course is up to you depending on how you feel about this (you need to feel good about it).

  If you still think your system may be achieved a malware, I would do these things before you start any troubleshooting effort:

  Download, install, update and do a full scan with these free malware detection programs at:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

  Download and run Hitman Pro here and during installation to be 100% sure to refuse the installation of toolbars, decline any e-mail options, nothing to do with Bing or MSN, perform a scan time, accept no e-mail and activate the free license:

  http://www.SurfRight.nl/en/downloads/ (make sure you get the free version)

  Download and run TDSSKiller from Kaspersky:
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  The scans by operating clean, then to solve any problems.

  If you still think that you have any questions, then proceed as follows:

  Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  What is your Internet browser and version?

  Your system's disks IDE or SATA drives?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  Do you see that you think not you should see and when you see it?

  What do not you think that you should see?

  If the system works, what do you think might have changed since the last time it did not work properly?

  If you need help interpreting your logs in Event Viewer, follow these steps:

  Here is a method to display specific information about individual events.

  To view the logs in Event Viewer, click Start, settings, Control Panel, administrative tools, event viewer.

  A shortcut to the event viewer is to click on start, run and enter in the box:

  %SystemRoot%\system32\eventvwr.msc

  Click OK to launch the event viewer.

  The most interesting newspapers are usually the system and Application logs.

  Some newspapers such as security and Internet Explorer may be completely empty or have just a few items.  The default settings for XP wants do not connect all this activity, unless you need to solve a problem in these areas.  If you enable logging for them the papers fill up quickly and could adversely affect the performance of your system with all the extras (often unnecessary) activity.

  If you have Microsoft Office installed, it has its own newspapers, and they can be empty or occasional boring activity very little or, if there is no problem with your desktop applications.  It's normal.

  Not every event is a problem, some are informational messages that things work very well, and some are warnings.

  However, no event should defy reasonable explanation.

  Each event is sorted by Date and time.  Errors will be red Xs, warnings will have yellow! s.
  Informational messages have white is.  Not every error or warning event means that there is a serious question.

  Some are excusable at boot time when Windows starts.  Try to find only the events to the date and time around your problem.

  If you double-click on an event, it will open a window of properties with more information.  On the right are black up and down arrow keys to scroll through the open events. The third button that looks like two overlapping pages is used to copy the details of the event in your Windows Clipboard.

  When you find an interesting event that occurred at the time of your question, click on the third button at the top and arrows to copy the details and then you can paste the details (right click, paste or CTRL-V) the text in detail here for analysis.  Remove all personal information from your information after you paste If you are forced to do so.

  If you paste an event, it will look something like this annoying system startup event:

  Event type: Information
  Event source: Service Control Manager
  Event category: no
  Event ID: 7035
  Date: 14/07/2010
  Time: 17:54:18
  User: Jose
  Computer: computer

  Description:
  The Remote Access Connection Manager service was sent successfully a starting control.

  To get a fresh start on any log of the event viewer, you can choose to clear the log (the log backup is available), and then reproduce your problem, then just look at the events around your show and troubleshoot events that are happening when you have your question.

• I just replaced my MB Pro with a MB Air. Air has less memory and will not support a full restore of files and the saved data. How to do a partial restore

  I just replaced my MB Pro with a MB Air. Air has less memory and will not support a full restore of files and the saved data. How to do a partial restore

  Do you still have the MBP? If so you can manually copy and paste the files you need.

  If you do not have the pro more, you need to buy a USB key and plug it into the MBA... use it as a target. Once you have a system file of the previous laptop again, you have to manually choose what to copy across.

• The files and settings to remove the old computer when you make a file and the transfer settings Wizard?

  The files and settings to remove the old computer when you make a file and the transfer settings Wizard?

  Hi KaraDay,

  When you use the files and Settings Transfer Wizard in Windows XP, it only transfers a copy of the files and settings on the computer.

  How to use the "files and Settings Transfer Wizard" in Windows XP

  http://support.Microsoft.com/kb/293118

• I can see other computers on a network of peer to peer windows XP but cannot access their shared files and the shared printer.

  I can see other computers on a network of peer to peer windows XP but cannot access their shared files and the shared printer. The computers are connected by a switch, fixed IP addresses that are correctly configured and point to a DNS server outside the network. When I try to open the icon for one of the computers, he asked for credentials. I try to type the user name for the computer that is sharing the resource and the password. It is the user account whose computer is loged on and belongs to the Administrators group. for example: user name (Computer1\username) password (password). It does not work. The Windows Firewall is disabled on all computers. It worked well there 2 days. I can't find anything wrong with the network settings. Does anyone have a solution? Thank you.

  If the portion of the machine has activated - Simple file sharing (i.e. it is XP Home or it is XP Pro with Simple (default) file sharing) - while all file sharing connections authenticate as user 'guest '.  It will not matter what username / password you provide, it will attempt to authenticate as 'guest '.  If the guest user has received a password or the guest account is not active, you will experience the symptoms you describe.

  If the serving machine running XP Pro and Simple file sharing is disabled, then you should be able to connect by specifying the user as computer\user and the password to connect.  To turn off Simple file sharing:

  "How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP"
    <>http://support.Microsoft.com/kb/307874 >

  Also:
  "Description of the account in Windows XP"
    <>http://support.Microsoft.com/kb/300489 >

  HTH,
  JW

• I am trying to install a program and I get entry point getdlldirectoryw could not be found in the library of links Dynamics kernel32.dll file and the same for shreggetvaluesw to shlwapi.dll

  I am trying to install a program and I get entry point getdlldirectoryw could not be found in the library of links Dynamics kernel32.dll file and the same for shreggetvaluesw in shlwapi.dll. How can I fix the problem.

  You have all your current updates?
  Go to windows updates and see if there are updates that you do not have installed.
  The error message seems to indicate that your copy of XP has not been updated.

  Updated and let us know if you still receive the error message.

  Thank you

  Marilyn

• How to determine the size of the file and the pixel of an image?

  How to determine the size of the file and the pixel of an image?

  1 MB is 2 ^ 20 bytes. It is easy to represent long:

  final long MegaByte = 1048576L; //1048576 is 2^20 and L denotes that this is a long
  if(fileConn.fileSize() > MegaByte)
  {
  do something here
  }
  

• Question about the configuration of virtual computer file and the working VM location

  I noticed one of my virtual machines had two data warehouses listed under "Items" in the vSphere Client.

  After some research autour, I found the virtual machine files are in the correct data store, but the 'VM-configuration file' and 'Place of work VM' are in another data store.

  Can I combine all in the same database?   I'd rather have the config and the workplace on ma who has a lot of main storage.  For some reason, the configuration file and the location of work were created on a local storage on my host.

  Any suggestions?

  Thank you

  David Moore

  You can use Storage vMotion to migrate only the virtual machine configuration file to the desired location, just start the wizard of vMotion and storage step 'Select the data store', click Advanced, and you will see the option to select a new destination for the configuration file data store.

• I'm trying to download 11 items that I already have on a new computor windows 8.1 after downloadind the first file and the extraction I get the error message when I try to download the second file: the party reach the components file is missing

  I'm trying to download 11 items that I already have on a new computor windows 8.1 after downloadind the first file and the extraction I get the error message when I try to download the second file: the party reach the components file is missing

  Make sure you have both. (1 of 2) file .7z and .exe file (2 of 2) under the same folder files

  Then double-click on the .exe file (2 of 2) it will start the installation process.

• I reinstalled adobe CS6. my other macs, I had a printer named 'Adobe PDF', that I could choose that as my printer and a dialogue box came up, I named the file and the location.  I can't figure out how to get this done on my new mac.  Help

  I reinstalled adobe CS6. my other macs, I had a printer named 'Adobe PDF', that I could choose that as my printer and a dialogue box came up, I named the file and the location.  I can't figure out how to get this done on my new mac.  Help

  There are two ways to create a PDF on a Mac:

  (1) you can use the default method, which is to choose file > print. Click on the PDF menu below on the left, then click on save as PDF. This lets you name and save the PDF file using the mechanism of OS X to create PDF files.

  (2) in the same menu, you can save in Adobe PDF format. It runs a script (a little slow) that lets choose you what PDF settings file you want to use. This is the Adobe-developed mechanism that replaces the old Virtual PDF printer.