Share LUNS between hosts ESX4 and ESX3.5

Similar Questions

• How to share files between Windows XP and Windows 7 without password?

  Hey guys, I want to share files between windows 7 and windows XP. I don't want to put the password on my Windows 7 or Windows XP account. I am going on my Windows XP perfectly shared files from Windows 7, but I am not able to go on my files of windows 7, the cause of my XP he asks user name and password. I enter the user name and it does not accept it if I make a password for my windows 7 and enter as the user name... I don't know what to do guys any help?

  Windows 7 only WILL NOT allow you to share files without a password, it's all just a common sense safety requirement.  It of a very bad practice to run your Windows installations with a null value, a password, give your facility a valid password.

  The simplest around your problem is to create an account with the same names and passwords on each machine and so typed the password when the connection is too a problem allow AutoLogon on the machines.

  John

• I need to share files between windows xp and Windows 7

  I am unable to share files between Windows XP Home Edition and Windows 7 Ultimate edition

  I have a wireless router and my two computers are connected on it.

  Please give me detailed guidelines on how to share files between them.

  Here are the steps of general network troubleshooting. Just cannot apply to your situation, so just take the bits that are. It may seem daunting, but if you follow the steps in the links and suggestions below calmly and consistently, you will have no difficulty to implement your sharing.

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  In Windows 7, go to control panel > everything in Control Panel > network and sharing Center. Click on "change the advanced sharing settings. You don't want to use the residential group unless you have all Windows 7 machines. If you do and you want to use the homegroup, see Windows 7 Help & Support. Otherwise, in sharing advanced:

  Discovery of plug in the network
  Open the files and printers sharing
  Turn on the sharing section Public folder sharing
  Plug the password protected sharing

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, running on Windows 7 sharing files and printer as above will take care of this for you. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

  Start > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  D. Si one or more of the computers on your network are XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. In Windows 7 I usually share the Desktop of the user and the Public directory.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response. MS - MVP - Elephant Boy computers - don't panic!

• What is the best way and to share data between a server and a Client app?

  Hello

  I'm trying to communicate a Client-Server application.

  In fact, I already have a simple data transfer via TCP/IP. However, I don't know yet, if TCP/IP is the best (and by that I mean, better, faster, safer, etc.)

  How to do.

  What are the cons and Pros between TCP/IP, STM and shared Variable?

  Do you recommend another type of communication in addition to these 3?

  Thank you

  Matt.

  In my view, that a general question cannot have a response says.

  Then, there is no way 'the best' for sharing data between a client and a server app.

  I like to use TCP/IP, but sometimes (when data loss is not critical) I use UPD (quick and dirty).

  I generally avoid shared variables, especially on embedded devices.

  Some other times I have I like to Exchange data in a database...

  A few other times I Exchange data using file...

  Marco

• How to share Internet between a computer and the Windows Phone?

  How to share internet via pc windows for windows phone?

  Hi magali,.

  I suggest you to refer to the links and check if it helps.

  http://answers.Microsoft.com/en-us/WinPhone/Forum/wp8-wpnetwork/Internet-sharing-not-working-in-Windows-8-Lumia/8bf52b82-ebd8-47dc-B3FC-c1ee06abb6d5?msgId=f83df1c9-F186-495B-b16d-41c09578afdb

  http://Windows.Microsoft.com/en-GB/Windows/Connect-Internet#1TC=Windows-8

  http://Windows.Microsoft.com/en-us/Windows-8/mobile-broadband-from-start-to-finish

  Hope this information helps. If you have any questions, please let us know.

• USB Wifi between host (Win7) and comments (Ubuntu)

  Hi all

  I learn some stuff of WiFi security, and I installed Ubuntu in my VMWare Workstation 11 environment. My host OS is Windows 7, which is connected to my home network via Wifi

  Now, what I need is in the OS (i.e. Ubuntu) invited, I should be able to allow wireless access (so that I can run Wifi network scans etc.). I filled my network and laso used NAT, that give me access to my home network via my host, but they appear as wired connections in Ubuntu. If I understand correctly, this is possible by using a USB WiFi dongle.

  I bought a USB WiFi dongle now (it should arrive in a few days), but I don't know how can I get my Ubuntu OS guest to use this USB Wifi adapter while keeping my OS host on the built-in Wifi adapter.

  Simple I plug in the USB network adapter in my laptop and it will be recognized in Ubuntu or whatever I need to do some settings in VMware?

  Thanks in advance

  I got this job, post my answer for posterity

  I bought a TP Link WN823N USB Wifi adapter.

  (1) keep your host Wifi on. Plug the USB, let it download the drivers
  (2) once installed, turn on your virtual machine
  (3) open VMWare, right-click on your VM-> removable devices
  Here, you should see your USB adapter. Select Connect (disconnect from the host). He will now connect the adapter USB Wifi for your Linux VM and alto - it should work!

  What it does is essentially the WiFi adapter will be connected to the virtual machine and disconnected from the host and the host can continue to use the built-in WiF

• How to share files between elements Organizer and Premiere Elements?

  Hello

  Since many years and versions of first and Photoshop Elements, I enjoyed the use of video in elements Organizer, projects when a new project was created under the Premiere Elements. I currently used this function up to the Version 11 of first and Photoshop Elements.

  Since my last update to version 14 of these two software, this feature doesn't seem to be present more. Indeed when I create a new project from Premiere Elements and fill it with video files:

  • either by dragging from the organizing elements in Premiere Elements
  • or importing video, Premiere Elements files.

  no new category of Album (usually called by the title of the video project) appears in the left column of the elements Organizer. Help files to the extent where have not been useful, even distinguish it: FBUS.html https://helpx.adobe.com/elements-organizer/using/using-elements-organizer-premiere-element

  Does anyone have a clue on the procedure of enabeling once again this important feature under the first items 14 and 14 elements Photoshop?

  I currently running Windows 7Pro, 64B. During the installation of Photoshop elements 14, I converted version of catalogs items Organizer version 14, using the automatic procedure 11. Neither first nor Photoshop elements 11 are more active on this computer. Suspecting a "bug" in update of organizing elements version 11 to 14, I made as a result of unsuccessful attempts:

  • I created a new project video with first items 14 and added video files using the dragging organizing elements 14 first 14 elements
  • I created a new project video with first items 14 and added video files using the software import feature.

  In both cases, it has failed to create a new folder in my albums, my video projects with the name of the newly created in Premiere Elements project.

  I hope to receive assistance on this issue which is very important when choosing a video footage of a very large number of video files to the creation of a new video.

  Thanks in advance for your suggestions.

  Daniel

  As we have always said, those who cannot say and those who tell don't know.

  But since it has been deleted a few versions ago, I'd say it's unlikely return.

• Share printer between XP Home and XP Media Center

  I have two computers, A & B, hooked to a Linksys wireless router.

  A Dell 8200 runnng XP Home SP2, connected Linksys wrt54g router, has 1000 Epson printer pluged in via USB.  Spysweeper running and SafeEyes.  IP 192.168.1.100

  B - Dell E1520 running XP Media Center 2002 to the same router. Spysweper running. IP 192.168.1.101

  The two turned on file sharing, both belong to the MSHOME workgroup.  Configuration of the RAN home on each network.

  You want to print from laptop for the Epson, which is the shared printer hooked to the office.

  Machine can see B via the network.
  Machine B is unable to see through the network.

  MS Firewall disabled on both.

  Each other, the two machines can ping via IP address.

  Since B is unable to see through the network, I can't use the shared laptop desktop printer.  Tried through network browser and ip directly connect to TERM...

  Any thoughts?

  Both have all MSFT patches up-to-date.

  Thanks in advance...

  
  

• Hosts VDR1.2 and ESX3.5 - api vcb exception error

  Hello

  I run a mixed environment with ESX4 and ESX3.5 hosts. Virtual machines running on ESX3.5 hosts are not saved.

  Failed to create the snapshot for..., error-3948 (exception of api vcb)

  If I migrate the virtual machine even to an ESX4 host, the backup procedure is running without any problems.

  I am able to the snapshot of the virtual machine and I also checked the resolution of host name.

  Any additional advice?

  THX, P

  Since the (http://www.vmware.com/pdf/vdr_12_admin.pdf) Administrator's Guide

  Data recovery is built on IPY vStorage of VMware for the Protection of the data.

  Http://www.vmware.com/files/pdf/vmware-data-recovery-fq-en.pdf FAQ

  Can I protect virtual machines residing on VMware ESXi hosts?

  Yes, VMware Data Recovery can protect VMs on ESXi 4.x and host ESX 4.x. Note that

  VMware Data Recovery is not backward compatible with ESX 3.5 or guests earlier. It also means that

  When a vCenter Server 4.x is managing two ESX 4.x and ESX3.5 hosts, cannot of VMware Data Recovery

  Protect virtual machines that residents on ESX and ESXi 4.x hosts.

• Sharing LUNS between VMware Clusters

  We currently have a 3.5 divisΘe in farms host.

  Farms, they are further broken into clusters

  Y at - it problems with sharing LUNS between clusters in the same farm.

  I don't think that it is a good idea, but I can't seem to find any documentation indicating one or the other.

  Of course you must have shared LUNs within the cluster.  But it seems that you ask if you must share LUNS between clusters.  Yes at least one logical unit number.  This way if you need to move virtual machines between clusters, you can.  And of course you mentioned your lun model.

  Matthew

  Kaizen!

• Cannot share files between two computers.

  I want to be able to share files between my computer and my wife we have a home network and I can see the file sharing is enabled.   When I go to the networks in Explorer:
  1. I see her computer
  2. He asks me a username and password.  What is my user name or his.
  3. password?  Is the WiFi password, the home page group passes, my password of the computer or its password to the computer.

  I have not found a combination that works.   I need to get this working so that we can both use Quickbooks. It would be useful for many other exchanges of files we currently do by e-mail.    Note that we have no problem to access two network printers, or send files to a print server that manages our tracer.

  Hello

  Sorry for the late reply.

  Method 1

  I suggest leaving the homegroup and see if it helps.

  Leave a homegroup

  http://Windows.Microsoft.com/en-GB/Windows7/leave-a-HomeGroup

  After that I suggest you refer to the procedure described in the following article and join in Group once more.

  http://Windows.Microsoft.com/en-GB/Windows/HomeGroup-help#HomeGroup-start-to-finish=Windows-7&V1H=win81tab1&V2H=win7tab1

  Method 2

  I suggest you to temporarily disable the anti-virus by following the link below and check the State.
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

   

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Please let us know if the problem persists. We will be happy to help you further.

  Thank you.

• Share data between a PC host and NEITHER sbRIO-9626 connected by Ethernet

  
  

  Hi Sophiec,

  In fact, shared Variables are a good way to share data between a host and a target. However, this is not the only way for data sharing.

  On the follow-up document, you will find different ways to do it: http://digital.ni.com/public.nsf/allkb/48D244EC86971D3986256BD4005CCC28 as:

  Shared variables
  TCP
  UDP
  DataSocket
  Other methods of Communication

   

   

  I hope this will help!

   

   

• sharing between ESXi3.5 and ESX4 vmfs volume

  Is it possible to share a LUN with a vmfs between ESXi3.5 and ESX4 servers?

  IM upgrading to ESX4 and wanted to know if I can share the volume between the old and new guests and migrate virtual machines gradually. I read that the vmfs specification has not changed between 3.5 and 4, it should be possible to share beween 3.5 and 4.

  Is it possible?, supported?, not recommended?

  Hello

  I assume you mean shared storage?

  To answer your question. Yes that is supported and this is the route that most of the people.

  Storage is compatible.

  As soon as you upgrade virtual hardware of your virtual machine it can be started from a vSphere host.

  --
  Wil
  _____________________________________________________
  VI Toolkit & scripts wiki at http://www.vi-toolkit.com

  Writer to the blog www.planetvm.net

  Twitter: @wilva

• Frequent disconnects between cRIO-9024 and host computer

  Hi all

  I had a brand new cRiO OR 9024 and several modules of recording data a few days ago. I have setup the IP address for the cRIO which is 10.0.0.2 and the subnet mask is 255.255.0.0, which is the same with what I've done for the host (different IP address). I installed the software that I need on the controller RT. Throughout the process, I have disabled the firewall. I use MAX 5.0 and NEITHER cRIO 4.0. Two of them are the latest version. I built the link between the cRIO and my computer successfully. However, the target is always disconnected from the host computer, even if I do not have action on the cRIO, that is. Without running any software on it. Status of the disconnection is achieved since the MAX, but surprisingly, I can ping through the IP address of the cRIO. It seems to me that the connection between the host computer and the cRIO was established.

  I tried to run code on the target, but unfortunately, the disconnection also occurs frequently simple. I checked the CPU target and the use of memory, which are low. So I concluded that the disconnection is not generated by the high utilization of the processor or memory.

  I also tried to reformat the cRIO and reinstall all software, but it has no effect.

  I also found that a warning appears regularly on MAX interface that "there was a problem to retrieve the settings of the target. For more information, go to ni.com/frinfo and enter the Info Code MAXServerUnkownError. If the problem persists, contact National Instruments'. I checked MAXServerUnkownError of

  NI.com and followed the instructions to make sure that there is no bad configuration on my computer as a firewall etc. However, without doing wrong was found.

  Can someone help me figure out what is the problem?

  Concerning

  Japanese

  Hello Japanese,

  Thank you for answering my questions. I have more questions that should lead to a solution to your problems:

  1 is the add-on NO-time installed on the cRIO?

  2. are you able to disable the antivirus on your computer?

  The add-on NO-time turns out to cause frequent disconnects with cRIOs in LabVIEW 2011. To view the add-on, you will need to right click on software under the cRIO, select Add/Remove Programsand select the option custom software installation . If it is installed, I recommend to remove this add-on the cRIO to help solve disconnects.

  Please let me know if disconnects continue after removing NO-time and disabling the antivirus.

  Kind regards

  Andrew Brown

• DMA between host and target FPGA is not supported for this remote system.

  I try to cover with my FPGA (on the cRIO-9002) of the RTO.  I have install upward of anOpen good VI reference without error, but as soon I try to access thefifo I error-63001 and the attached message wrote:

  Error-63001 occurredat reference FPGA VI opened in the target - multi rate - variables - fileIO_old.vi

  Possible reasons:

  NOR-RIO FPGACommunications framework: (Hex 0xFFFF09E7) DMA from the host to the FPGA targetis not supported for this remote system. Another method for controller of e/s or climatiqueLes associated with the FPGA target.

  What other I/O optionsdo I need to move the data asynchronously to the RTO for the FPGA. I have triedcreating memory, but it seems that I can't write to the memory of the RTOSside.

  We have also a 9012sitting around will using this cRIO rather solve this problem.

  I'm very very greenwhen it comes to LabView, so I apologize if this is an easy question.

  As stated in the readme of the driver NOR-RIO, DMA is not taken in charge from the host to the FPGA on the cRIO-900 x series. The cRIO-901 x supports DMA transfers between host and FPGA and FPGA to host all the cRIO-900 x series controllers only support transfers the FPGA host DMA. As a result, LabVIEW returns an error if you try to transfer using DMA controller for cRIO-900 x.

  The 9012 looks like the ideal solution, you are very lucky to have additional hardware laying around