sharing between ESXi3.5 and ESX4 vmfs volume

Similar Questions

• Store of data sharing between 4 ESX and ESXi 5

  Hello

  I have a vSphere environment 4.1 with a vCenter and a cluster of 3 ESX 4.1 access to the content of data through fiberchanel (type scneario) warehouses.

  And now I need to install a new ESXi 5.x (cannot be a different version) in a separate environment, outside of the current vCenter, BUT to access the warehouses of data even as the cluster of vSphere 4 current.

  Anyone know if there should be no problem sharing between 4 ESX and ESXi 5 access to the same data storage?

  Thanks in advance

  As long as the FC zoning is configured properly, avoid all the problems.   ESXi 5 will be able to see the data created by ESX4 VMFS3 stores, it will not be able to create the same size of virtual machine he can on a 5 VMFS datastore.

• Problem to create the Internet connection sharing between Windows XP and Windows Vista.

  Original title: Internet connection sharing between Windows XP and Windows Vista.

  Hello

  Recently, I plugged a laptop running Windows XP to a desktop computer running Windows Vista using a standard Ethernet cable with the intention of use sharing of Internet connection. The notebook contains a wireless connection that I've routed to the office via the cable said.  While the initial phase of installation went well (I was too lazy to do it manually, so I just used the Wizard "Set up a home or small business network" Windows XP,) I had to turn off the host computer to install a program. When I tried to set up ICS again, I couldn't connect to the Internet by using ICS. After this failure, I tried to configure the properties of TC/IPv4 (IP, gateway by default, etc.) manually, but I still couldn't run.  I am able to access the shared host PC and client files. It seems to me that some service essential to the proper functioning of the ICS may be disabled in some way, but it's just speculation, as I have no evidence of such a service. Help would be most appreciated.

  Thank you

  FG-man

  I tried this before using a laptop to share internet with my 360.  problem is there was Nat on the router, and it is in contradiction with the ics.

  Anyway long story short I did some research on the Internet and discovered that if you're behind a router ICS will be confllict with her, as ICS also does routing. a much better option is to "bridge the conections ' on the laptop.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/hnw_bridge_install.mspx?mfr=true

  If you go this route, you need to set a static ip address for the office,

  Either that or if you want to continue using ICS put the laptop in the DMZ in the router may help, but it will be less secure.

  Hope that this helped good luck

• Migration/cloning between ESX3.5 and ESX4

  We have a server to update 1 of vcenter 4.0 vsphere with ESX3.5 hosts.

  Once we improve some of our guests to ESX4, can we migrate/clone between 3.5 and 4.0 guests?  (no vmotion, clone/migrate just standard).

  I wasn't sure if there are changes to the "material" to the VM themselves.  Or that don't apply to the new virtual machines built directly on ESX 4?

  Thank you

  Shane

  vSphere supports VMS created in VI-3 (Hardware version 4) and vSphere (Hardware Version 7). So no there is no need to upgrade your virtual machines - but you will not get the improvedfunctionality of the virtual hardware Version 7 as mempry, vcpus, replaceable virtual material hot, etc. - discover http://www.vmware.com/pdf/vsphere4/r40_u1/vsp_40_u1_upgrade_guide.pdf of appropriate means upgrade to vSphere.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Problem of file sharing between Windows 7 and Vista using a working group

  I use a working group and have a shared folder on a computer that is running Windows 7 Home Premium. I'm trying to access the file from a computer on the same workgroup that is running Vista Business. It requires a username and password that I turn off password protected sharing on both computers and tried all combinations of accounts and passwords on both computers, but can not get access to the file. I'm sure I'm missing something and you would appreciate the help.

  Hello TamiRigby,

  Take a look at this thread for instructions with reset the permissions file and folder to a specific folder in Windows Vista:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/how-do-i-reset-folder-permissions/b186a591-88ca-4FEE-a7a6-25d071dde820
  I suggest you try this with the file you are having problems sharing.

• folder shared between the administrator and guest user

  Hello

  I am trying to hire someone to work for me, using my computer...

  It will record both use comments, but I need it to access some of my files, for example my quickbooks etc...

  Is it possible to have a shared folder, or in some way to grant access to certain files and applications?

  Thank you very much

  You can use the Public/Dropbox folder in your user folder.

• Sharing between the office and cell phones driver

  How to share a driver (with data files) from the desktop (Windows 7 Home Premium) with a laptop (window Vista Home Basic) through a router?

  Hello little bb,.

  A quick correction: you mean in car no driver.  A road is a place of storage for files, a driver is a program that communicates with the hardware (printers, cameras, scanners and the mouse have a drivers for example).

  In any case, to share your car from the desktop to a laptop computer, there are several choices.  This tutorial on this page provides an excellent walkthrough.

  However, an easier method is to use the "Homegroup".  Since the first computer, open your Start menu and type "homegroup" to find the option to create a home group.  Once created, you can do the same from the laptop to join the home group.  Once completed, the two computers will see each other and you will see a new folder 'group' on the left side of your file Explorer that allows you to access shared drives on the other computer.

• SE error message "connection failure: unknown username or bad password when printer sharing between Windows XP and Windows 7.

  Original title: windows 7

  Hello world
  I have a network of working group, I install a printer on the computer with xp operating system printer and shire of thise. So I have computer with os 7 (windowse 7)
  When I refill jone printer that computer (windows 7), he wants the username and password but notconnected.
  error: user name of faielur:unkown or mauvaismotdepasse connection
  pleeeeeeeeeeeeeeeeeese help me

  Hello majidyazdani,

  According to the description provided, it seems that you are having problems with the printer. As I understand it, you need to share the printer from Windows XP to Windows 7

  I need to ask you some questions to help you better.

  Click on the link below to set the printer share.

  Networking of computers running different versions of Windows

  Answer to us if you are having problems with printer sharing or any other problem of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• Persistence, shared between the EJB and WAR projects

  Hello
  
  I created an Enterprise Application in netbeans which an EJB project and archive web. This can be expanded further at a later date by the presence of a client application as well. I'm still pretty new to this so you don't have to forgive me if it is a simple problem. I have a persistence unit (persistence.xml) that I need to share between the two WAR and EJB, but so far, does not feel very lucky. I have read the various responses and they say I should have the EAR that is constructed in the following way:
  
  Project.ear
  =======
  META-INF/MANIFEST. MF
  lib/Persistence.jar
  -> META-INF
  -> META-INF/persistence.xml
  project - ejb.jar
  project - war.war
  
  When I try to compile, if I get the following messages among two EE modules:
  
  Note: The XML persistence [META-INF/persistence.xml] has not been found. NO GENERATION will occur! Please ensure that a persistence XML is available either from the directory CLASS_OUTPUT [META-INF/persistence.xml] or by using the eclipselink.persistencexml property to specify its location.
  
  I tried to copy the persistence.xml in the META-INF directory in the EAR file and defining the eclipselink.persistencexml=META-INF/persistence.xml, but it still shows the same thing. Is this a classpath problem or is something else wrong?
  
  Thank you very much

  The EAR is a good idea, but you put the META-INF/persistence.xml in your ejb module. The EJB is where you do all your (managed container) transactional stuff, so do call in your EJB since the WAR instead of trying to share a persistence between modules unit.

• Sharing data between Windows Vista and Windows 7

  As Windows Vista cannot join the homegroup, which is a feature of Windows 7, how the files, folders or drives are shared between Windows Vista and Windows 7?

  Hello

  Set you up a network between Vista and Windows 7:

  "Networking of computers running different versions of Windows.

  http://Windows.Microsoft.com/en-us/Windows/networking-home-computers-running-different-Windows#networking-home-computers-running-different-Windows=Windows-Vista

  http://Windows.Microsoft.com/en-us/Windows/networking-home-computers-running-different-Windows#networking-home-computers-running-different-Windows=Windows-7

  "Learn how share files and printers on a network with computers running.
  Windows XP, Windows Vista and Windows 7. ... This article also covers the
  necessary parameters to set up file and printer sharing on your network. »

  See you soon.

• How to disable the sharing of files between the host and guest XP PRO?

  Hello my setup is:

  Host of XP PRO and XP PRO comments using NAT.

  How to disable file sharing between the host and guest (do not want to view or access the file share on host comments)?

  In the comments

  I tried to disable simple file sharing in folder options and uninstall

  File sharing and printing of LAN properties but can always see and have access to the

  Organizing actions of folder...

  Help please!

  Then you will need to disable "Microsoft File and Printer sharing" or you need to set restrictions with the GPO. As long as the systems have their default values the value of a Microsoft network allows to use actions.

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' answers and answers. Thank you!!

• How to calculate the size of a VMFS volume?

  Creating a new partitiontable after ESXi 4 wiped empty was pretty easy with fdisk.
  These days with partedUtil and ESXi 5 is not so trivial.

  Consider that we have a disk/Lun, which looks like this

  ~ # partedUtil get /vmfs/devices/disks/mpx.vmhba1:C0:T4:L0
  93990 255 63 1509949440

  and suggests that the original - now messed the Volume was created with ESXi 5.
  How to calculate the value of the end in the sector so that I can recreate the VMFS partition like this:

  partedUtil setptbl ' / vmfs/devices/disks/mpx.vmhba1:C0:T4:L0 ' TPG '1-2048 ? '. AA31E02A400F11DB9590000C2911D1B8 0 "

  
  In this case, the correct value is 1509949349, but how do I calculate if I don't know the correct value?

  Hello

  the output of the command "partedUtil get /vmfs/devices/disks/mpx.vmhba1:C0:T4:L0" will be useful in your case, it's "93990 255 63 1509949440".

  gives us the values for C/H/S (cylinder/head/sector).

  A VMFS volume partition must end on the limit of a cylinder, so selecting the last sector of the partition table should be done using the formula endSector = (C * H * S - 1).

  who is '1509949440-1' = 1509949349.

  Concerning

  (Ref: http://www.virtuallyghetto.com/2011/07/how-to-format-and-create-vmfs-volume.html)

• VMFS sharing between clusters

  Is it safe to use as part of a cluster of ESX3 VMFS volume and a bunch of ESX4 simultaneously?

  http://communities.VMware.com/thread/277900

  As mentioned in the above discussion that it seems you can use your configuration without problem as long as you present LUN to all hosts with the same LUN ID.

• Is it normal that the screen SE iPhone packed between the button of the vibration and the positive volume button?

  Is it normal that the screen SE iPhone packed between the vibration switch and the positive volume button?

  If it was the impact, where the screen would break. It is normal for a screen to break at the point of impact.

• I followed the instructions to set up the home between my Mac and iPhone sharing 6, but I don't understand all the music on my iPhone

  I followed the instructions to set up the home between my Mac and iPhone sharing 6, but I don't understand all the music on my iPhone

  I have confirmed:

  (1) devices are on the same network

  (2) I am connected to my AppleID with the same account

  3) are my OS up to date (Mac 10.11.2) (9.2 iPhone)
  (3) I closed iTunes and the App has reopened

  (4) I turned my iPhone off and rebooted (and confirms the foregoing)

  On my iPhone, I see in my music library, different ' kind' listed (e.g., classic, recently added, music of the 1990s, etc.) but they are all empty.

  Im hoping to see the music I have in iTunes on my Mac and play these songs on my iPhone.

  IM thinking, music that would be shared from my computer to my phone will be on the cloud?

  (I did not all default to add my music in the cloud at the moment).

  Post edited by: abbeyinor

  Did you go into settings > music on your phone and sign in home sharing?

  See you soon,.

  GB