Shared action does not of course 7 to 9

Similar Questions

• trying to share a printer, so I can access it from another computer on my network, it seems to cross but the shared icon does not appear

  Original title: sharing printer problems!

  I am trying to share a printer, so I can access it from another computer on my network, it sems to cross, but the shared icon does not appear? Why is this?

  I'm on windows xp professional

  Hi Pazza1995,
   
   
  Follow the steps listed in the articles below and check if it helps to fix the problem:
   
  Troubleshooting File and Printer Sharing in Microsoft Windows XP
   
  How to use Windows XP to share a printer with other people on your network 

• Problem with wireless - Vista Network and Sharing Center does not recognize my connection!

  I use the Home Visa software and my network and sharing Center does not recognize my connection but I can access the internet without any problem. Previously, I was using a wireless router Linksys with an old box of AT & T internet with no problems. The problems started after I updated my AT & T internet box that made obsolete the linksys router and now the network share does not connect. I just have the problem of getting the network and sharing device recognizing that I am actually connected to a wireless network. I can't use my printer or share files with other people. I can't get my wireless printer to work if I restart my computer and I have the documents I want printed already sent to the printer. My network and sharing Center also works very well for a few seconds when I start my computer then it turns off again.

  Hello

  Method 1:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  You can also view the related items for more information.
  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Method 3:

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

  See also:

  Connect to a network with Windows Vista wireless

  http://TechNet.Microsoft.com/en-us/library/bb878035.aspx

• Installed new router WAG160N and my Windows Media Player 11 media sharing now does not work

  I have a netgear wireless router which is dead. However, I've never had any problems with the media file sharing with WMP 11.

  After this router my media sharing file does not work. No devices appear at all.

  I use an Archos 605 PMP

  I have the latest firmware for the router installed

  I have not changed the default settings of the router at all. I tried to disable the firewall, but this did not help.

  Can anyone help? Thank you

  I now sort it and everything works.

  Removal of Windows Player 11 and reinstalled him there.

  Enabled on my Archos 605 WiFi

  then to the library, the sharing of multimedia files and my Archos was there in its entire splendor.

  Now I can now stream the content from my PC to my Archos

• increase ram 2 gb 6 GB shared memory does not increase

  I upgraded my ram that 2 GB to 6 GB but shared memory does not increase

  There are limits to the amount of memory can be used for shared graphics.

  Generally, configuring shared memory allocation is done in the BIOS.

• Keyboard shortcuts AND Actions does not

  Keyboard shortcuts 1 keys do not work (e, g.  "P" to scroll pen options, 'B' to scroll through brush options, etc...)

  The CNTL + and ALT + seems to work fine. In addition, when I hit 'P' or 'B' selects this option, it does not work through them (brush pencil to the replacement of the color to the mixer).

  I completely uninstalled PS especially remove any previous presets (that sucked) and re-installed Photoshop since I discovered it.

  In addition, actions does not correctly or the other. I have a copyright of metadata carried out screening. I had an action implemented to always update to preset on new or open documents. Given that I have re-installed PS, this script no longer works. I made a new model of metadata from 2016, has recorded a new action and implement the handler for scripts to run on the new and open. However, whenever it is running, the script that I have saved always reverts to "Feature of models" instead of pre-recorded format that is available.

  When I type 'P' or 'B', it selects this option, but does not work through them (brush pencil to the replacement of the color to the mixer).

  Go to edit-> preferences-> tools, "If you're on previous versions": Edit-> preferences-> General

  then Unckeck 'Key Shift tool Switch use'

  

• I just upgraded to 10 Windows and now I can't get into Photoshop Elements.  I get the error 150:30.  Set to zero, as suggests, does not, of course.

  I just upgraded to 10 Windows and now I can't get into Photoshop Elements.  I get the error 150:30.  Set to zero, as suggests, does not, of course.

  Thanks - I thought that this could be the best answer!  I just hope that, in general, PSE 8 works with W-10!

• Network and sharing Center does not open

  I get this error when you click "Open network and sharing Center" in the icon in the system tray wireless network connection.  In addition, same error when you click on "View the status of network and tasks" in the Panel.

  [Window title]
  : {26EE0668-A00A-44D7-9371-BEB064C98683}\3\::{8E908FC9-BECC-40F6-915B-F4CA0E70D03D}

  [Content]
  This file does not have a program associated with it for performing this action. Install a program or, if such is already installed, create an association in the default programs control panel.

  [OK]

  This all started with the question of the status of dead network icon (I'm under Win 7 Ult x 64): (http://social.answers.microsoft.com/Forums/en-US/w7network/thread/c3ee2c3f-82e5-44c7-8f40-ee7fb7f48c83)

  Found the answer, although I had to hit some unknown sites to get...

  http://www.Neowin.NET/forum/topic/597084-cant-open-network-and-sharing-Center-at-all/page__s__7f0aa9d03ff6176913fac7cf9fabe1de

  Here are the error messages which started my crazy searching for an answer:

  [Window title]
  Explorer.EXE

  [Content]
  This file does not have a program associated with it for performing this action. Install a program or, if such is already installed, create an association in the default programs control panel.

  [OK] [Window title]
  : {26EE0668-A00A-44D7-9371-BEB064C98683}\3\::{8E908FC9-BECC-40F6-915B-F4CA0E70D03D}\Advanced

  [Content]
  Windows cannot find ': {26EE0668-A00A-44D7-9371-BEB064C98683}\3\::{8E908FC9-BECC-40F6-915B-F4CA0E70D03D}\Advanced'.} Make sure you typed the name correctly and then try again.

  [OK]

• Game audio action does not work in Captivate 7

  Hello

  On the first slide in my class, I added a "quick start" guide It consists of a series of legends that contains text. In each legend, there is a text link "Continue" triggering a tip action to hide the current legend / show the following. This works perfectly.

  Now, I tried to reach audio at each step of the guide. I added a "audio playback" action after stocks show/hide for the first step. No audio not playing. When I changed the audio of the game to be the first action in the script - the script did not work at all. When I changed it between the show and the skin, leather working and show does not. What I gather from this is that play the audio does not work and also stops all this.

  Any advice?

  Thank you

  Just checked, created an action shared with almost exactly the same commands, but grouped together all the containers in text in a group Gr_TC

  Hide:

  

  It worked perfectly. You don't see a label, because it is a common action, to which I just filled in some settings. Attached to three buttons, had 3 containers of text and 3 different audio clips.

  The audio clip plays when it is used in another way? The only difference seems to be that you have a clip of VO and I used one of the sounds included with Captivate.

  Another way would be to fix the audio on the text as audio of the object container. Once you view the text, audio will play, when you hide the text to stop. It was the way to go before COP6:

  http://blog.lilybiri.com/playtime-with-audio-and-widgets

  Lilybiri

• Quiz, 'Last attempt' action does not

  In my project, the user has to choose to create a branch and follow the course or take a branch of the advancement of knowledge. If they choose to take the race management, questions are interspersed throughout the content after the content tested for. They are not classified on the quiz. Most of the questions is configured to allow 1 or 2 attempts. Quiz slides are defined in advance just to the next slide contained before.
  If they choose the branch of the advancement of knowledge, he takes them directly to the first question. If they answer correctly, they continue to the next question. When they answer correctly, they must be picked up at the beginning of the content of this section.

  I have the action of 'Success' configured to run a tip action that checks if a variable user to check what branching method, they chose, then "go to" the correct slide (success goes to the next question). This part does not work properly.

  'Failure levels' are set to 1. For the "last attempt" I also put it to run a tip action that checks if a variable user to check what branching method, they chose, then "go to" the correct slide (failure dates back at the beginning of the content for that matter). This part does not work properly. The project is not navigate to content in case of failure. My quiz is noted, but none of the questions are awarded points (they should be able to answer questions twice, but are able to continue even if they are not properly the second time).

  In Quiz preferences, I "branch of consciousness" checked and 'Allow the movement to the rear', in the region of success or failure, the user doesn't have an attempt to take the quiz. "

  On the question slide, I have "Attempts" value 2 and 'Levels of failure', set to 1. I tried different things in the 'last attempt' fall down and none have worked. The right question slide moves to the next slide and does not take into account what I put in unrolling the last attempt.
  Is there anything else I can check or change to ensure that it works properly?

  Thanks in advance for your suggestions.

  

  I'm done with two copies of each slide in the question.  One at the beginning of the content and the other at the end.  If the user gets the first incorrect answer, they just continue with the content and taking up the same issue (a different slide number) at the end.  For some reason, Captivate didn't work well, go backward.  This double solution the number of question slides in my project, but so far I don't have a big project.  Do not forward to the next project, which has already obtained up to 111 slides, with about 30 more to go finishing.  Because of what I do, my post must be an exe file.

• "set the restart target action" does not work, why?

  There is an element of "set the restart target action" in the SDF file. I put it to "run a system definition.

  

  But it does not work. I don't know why. It seems that when the project is canceled, the SystemDefinitionData.nivscfg file is deleted.

  

  Cancel the deployment of will stop the configuration and mark idle.

  If you restart the RT target by HW button or through the channel "System of command channels", while the configuration is active, it will start the Setup again after the reboot.

  Jiri K.

• shared variables does not

  Hello, I'm writing because I'm having a problem with the use of shared variables. I am doing a project for College and I use the DSC for his shared variable function. The problem im having is that shared variables do connect it no more. I followed a document "Getting started with LabVIEW Datalogging and supervisory Control Module" and managed to build an IOServer and shared variables in accordance with the document to deploy successfully. It was a few days ago. Today when I opened the project file even shared variables would not connect. IM also having the same problem with other projects that I made over the weekend that worked, but do not work now.

  Does anyone else have this problem?

  Hi Justin,

  I am pleased to see that you are able to work with your LabVIEW installation now. 0x0000002A error message reported only in what concerns the communication between the shared variable engine and part mutual FUND of the DSC module is blocked.  This was usually resolved by inspecting the security settings Windows for the firewall, as discussed earlier.

  As for your second question, it might be better to start a new post.  However, please specify what files you want to move and what wisely win. Where would you like the directory that is to be held and for what benefits?  If you are hoping to achieve a gain of performance or similar, there may be different approaches other than moving files.

  Kind regards

• shared variables does not not on PC

  Can someone tell the attached page, why my single variable sharing does not work with the LabVIEW application that I'm running on my PC. I put the variable 48 (I thought), and again in la OR Distributed System Manager, the value is not changed.

  Reset that my PC seems to have understood things works better. The VI is now able to read/write the shared variable.

• Compressed files into Windows Media files & does not of course

  All of a sudden my e-books and digital scrapbooking files, which have been compressed, transformed into a different type of file - unfortunately I don't know what, and I couldn't open them!  I don't know how they got that way.  I must have done something without meaning to!  Then I changed to try to open w/Windows Media which, of course, does not work either.  A single file has been highlighted; not all of my e-book.  Then I downloaded a new file digital scrapping, and it's a Windows Media file - like all my setting discarded digital who have not decompressed.  That's happened?  What should open with?  I had no problem to ANY of them before this happened.

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• How can I connect to the internet? Problems involving the network and sharing Center does not.

  Hello.
  I live in a House and bought a range extender so that I can get a connection in my basement as well.  I have installation range Extenders without problem.  When you install the range extender, I changed my name to my network router.  I changed the name of the network by typing 192.168.1.1 in my browser.
  The MacBook connects without a problem.  In the basement, the connection of Windows 7 works very well.  I have just connected Vaio Windows 7 my mother to the network, but it prompted that I enter the user credentials.  I read a post above and got that problem solved by opening the network and sharing Center and adding a new connection.  Now that the connection is configured correctly.
  The problem is with the laptop HP Windows Vista family basis.  Since I install the range extender, I can't connect to the network.  He had no problems before you connect the router or other networks to visit other places.  The new network name appears, but when I click it, it says I have to enter the user credentials.  I tried to manually, but the name is taken so I can't make a new and invites me to connect to the network that is established or to connect to a different network.
  • I tried to open the network and sharing Center, but it does not open.  When I click it, it opens a screen for a brief second.  The option "Display the status of network and tasks" opens either.

  • I logged as an Administration by entering the command line < net="" user="" administrator="" ctive:yes=""> > and restarted the laptop.  Even logged in as administrator, this folder does not open.

  • I also did a scan < sfc="" cannow=""> >.  The digitized rolled up with an error, but the error has been corrected.

  • I also updated the connection of the range extender.

  Why the network and sharing Center will not be open to the top?
  How can I configure my router my HP Windows Vista Linksys connection?
  Thank you.  Please let me know if you need more information.

  Thanks for your reply.

  In a last attempt, my sister has used the ethernet cable to connect directly to our router.  Next time, she turned on her laptop, she managed to connect to our wireless network and she was not invited to enter credentials.
  In this case, the manual connection helped solved the problem.