Network and sharing Center does not open

Similar Questions

• Problem with wireless - Vista Network and Sharing Center does not recognize my connection!

  I use the Home Visa software and my network and sharing Center does not recognize my connection but I can access the internet without any problem. Previously, I was using a wireless router Linksys with an old box of AT & T internet with no problems. The problems started after I updated my AT & T internet box that made obsolete the linksys router and now the network share does not connect. I just have the problem of getting the network and sharing device recognizing that I am actually connected to a wireless network. I can't use my printer or share files with other people. I can't get my wireless printer to work if I restart my computer and I have the documents I want printed already sent to the printer. My network and sharing Center also works very well for a few seconds when I start my computer then it turns off again.

  Hello

  Method 1:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  You can also view the related items for more information.
  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Method 3:

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

  See also:

  Connect to a network with Windows Vista wireless

  http://TechNet.Microsoft.com/en-us/library/bb878035.aspx

• How can I connect to the internet? Problems involving the network and sharing Center does not.

  Hello.
  I live in a House and bought a range extender so that I can get a connection in my basement as well.  I have installation range Extenders without problem.  When you install the range extender, I changed my name to my network router.  I changed the name of the network by typing 192.168.1.1 in my browser.
  The MacBook connects without a problem.  In the basement, the connection of Windows 7 works very well.  I have just connected Vaio Windows 7 my mother to the network, but it prompted that I enter the user credentials.  I read a post above and got that problem solved by opening the network and sharing Center and adding a new connection.  Now that the connection is configured correctly.
  The problem is with the laptop HP Windows Vista family basis.  Since I install the range extender, I can't connect to the network.  He had no problems before you connect the router or other networks to visit other places.  The new network name appears, but when I click it, it says I have to enter the user credentials.  I tried to manually, but the name is taken so I can't make a new and invites me to connect to the network that is established or to connect to a different network.
  • I tried to open the network and sharing Center, but it does not open.  When I click it, it opens a screen for a brief second.  The option "Display the status of network and tasks" opens either.

  • I logged as an Administration by entering the command line < net="" user="" administrator="" ctive:yes=""> > and restarted the laptop.  Even logged in as administrator, this folder does not open.

  • I also did a scan < sfc="" cannow=""> >.  The digitized rolled up with an error, but the error has been corrected.

  • I also updated the connection of the range extender.

  Why the network and sharing Center will not be open to the top?
  How can I configure my router my HP Windows Vista Linksys connection?
  Thank you.  Please let me know if you need more information.

  Thanks for your reply.

  In a last attempt, my sister has used the ethernet cable to connect directly to our router.  Next time, she turned on her laptop, she managed to connect to our wireless network and she was not invited to enter credentials.
  In this case, the manual connection helped solved the problem.

• Network and sharing Center does not

  I run windows Vista premium edition
  Even though I am connected to Internet (wifi or lan), the Center says
  NOT CONNECTED
  and I cannot perform any normal setting

  Also clickking on the icon, it is said
  YOU ARE CURRENTLY NOT CONNECTED TO ANY network

  This prevents me from doing a lot of things, such as modifying properties or sharing...

  Thank you
  I think I solved in

  Just run a prompt as an administrator (right click on it and click on)
  "Open as Administrator") and then enter the following command line:

  net localgroup "Administrators'"NT Authority\Local Service"/ Add

  I found it on
  http://www.Vistax64.com/Vista-Networking-sharing/102034-Hella-problems-Vista-Ultimate-network-sharing-Center.html

• Network and sharing Center will not be open in the Panel

  I've been away from home - where I HSI and it works very well - for a few months, I plugged to the network sporadically awireless (sometimes just bad signal), with a lot of frustration.  A few days ago, I went to a place where I could connect to a hard (secure) wireless network and enjoyed the smooth navigation for about an hour.  Later when I tried to connect to the smaller network, unsecure, I couldn't open my network and sharing Center. Whether from the drawer or the Control Panel, a screen opens displaying nothing, but the circle of rotation.  The TASK MANAGER IS REQUIRED to CLOSE THE PAGE - it will not answer the close box. TM shows the centre network and sharing as 'running', although there is no indication on the screen, except the title and the circle of rotation.

  My laptop is a dv6t Pavilion with Windows 7 (64-bit)

  All the other files in the Panel seem to open and operate normally.

  Hello Hamanslayer

  Thanks for posting on the HP Forums!

  I understand the network and sharing Center will not be open. I will do my best to help you! If please launch and center network and sharing, and wait for him so that he can provide an error. In addition, please try to run Centre network and sharing in a different user account. If you don't have one, create one.

  I did some research on this issue. Unfortunately, the only reliable troubleshooting that is remaining, if the above does not help, is to reinstall the operating system. Too, there are different issues that could be causing it. Reinstalling the operating system will focus on each of them.

  First, please save all the files you need. You can find specific steps on how to proceed in the following HP document: backup of files (Windows 7)

  Once this is done, you can safely reinstall the operating system. I'll also give you a document on how to do it: perform a recovery of the system (Windows 7) HP

  Please let me know your results. Thanks again for the display on the HP Forums. Have a great day!

  Mario

• Network and sharing Center could not load the

  Questions:
  -Network and Sharing Center: Page failed to load
  -Unable to connect to internet, but says that it is connected to a network (have three PCs in net)
  -Guest of the continuous window - "problems and reports no longer."
  -By opening system in Control Panel, said the "Installer could not load display.

  It's the question driving me crazy... Anyone had this problem before?

  Hi kyungturner,

  Please use the forum for Support of Vista,

  You have anything installed recently? It sounds like the system could have a corruption.  Save all your data prior to perform a clean boot to further diagnose the problem:

  http://support.Microsoft.com/kb/929135

  If the clean boot does not work, try a SFC scan to repair system files:

  http://support.Microsoft.com/kb/936212/

  Let us know if this helps solve the problem, Kevin
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Network and sharing Center shows not connected, but the computer is connected to the wireless network

  When I open the network and sharing Center, or hold my mouse pointer on the icon of internet connection in the bottom right of the taskbar, it shows that I'm not connected to a network. However, I know that I'm connected to the internet. My internet and e-mail work correctly. Also, when I click on the 'Connect to a network' option, find the list of available wireless networks, and it shows that I'm connected to my home network. How can I make Windows everywhere where I am connected to the internet, instead of recognizing only on the list of the networks without wire-available?

  Had exactly the same problem on Windows 7 (win7). Connected to the Internet but the status showing no connection and a red cross on the network icon. Problem has also caused problems to connect to Lync and Office365 along with VPN, which apparently uses the status to check whether the connection is available.

  Found the solution here: http://social.technet.microsoft.com/Forums/en/w7itpronetworking/thread/df17c593-e78f-4878-97b0-7569307934c5

  Apparently, certain permissions gets hurt in the database record and must be fixed using RegEdit. The solution is a step by step and likely to be resolved simply by removing a cache of file using RegEdit and potentially affecting certain permissions.

  It will be useful.

• Network and sharing Center is not a work of al. screen is frozen. How ca I fix the problem!

  When I go to a sharing network, the screen is frozen. How can solve the problem thanks

  Hi MaurizioSpallino,

  Thanks for joining us on the Microsoft Community Forum

  To better understand the question please respond with the following information.

  1. You did changes to the computer before the show?
  2. You receive an error message?

  For now, you can try the troubleshooting provided in the following steps and check if they help to fix the problem.

  Method 1: Make sure that the following services are enabled on the computer.

  (a) click Start and type "services.msc" in the search and click on services and ensure that these services are enabled:

  -TCP/IP NetBIOS Helper service

  -DNS Client

  -Function Discovery Resource Publication

  -SSDP Discovery

  -UPnP device host

  To start the service and set it to automatic, follow these steps:

  (b) right click on each of the services listed above and click Properties.

  (c) click the general tab, and then, next to startup type, select automatic.

  (d) click on apply and then click Start.

  Method 2:

  I suggest that you can exercise SFC scan and check if TI the problem persists. To do this, please see the following article.

  The SFC/SCANNOW command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link:

  http://support.Microsoft.com/kb/929833

  Keep us updated on the status of the issue.

  For any help about Windows, you can still post on the Microsoft Community Forum.

• Vista cannot open the network and sharing Center. Cannot open the computer properties. After trying to configure network options

  cannot access system restore and many other things

  Looks like I'm not the administrator more

  Hello david_).

  Thanks for the return of the response.  How antivirus software you use and what was the last full scan you completed on your system?  Did you run any software removal of malicious software on your system?

  Please visit the link below and follow the advice of THE C...  Please let us know status once it's over.

  Microsoft Answers: Malware

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/malware-called-antivirus-Pro-has-taken-over-my/3cb4a36a-6134-448C-A134-151d03fbd968

• I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center.

  Connection to the local network - properties dialog box

  Hi, I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center. But I can't access the Internet. My OS is Windows 7

  Hello Rajaneer,

  Is the computer that you are using a personal computer or a work computer?
  You will need to re - install your network card drivers like something was damaged and it prevents you to access the property:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Windows Vista connected online but not shown on network and sharing Center or on the taskbar, leads to other problems

  I have a Dell Inspiron 1520 running on Windows Vista, my router modem is a Motorola SURFboard SBG901. A few months ago on this computer, I couldn't see that I was connected online either from right down icon in my taskbar (it shows just two monitors with an 'x', that when you highlight on he says "not connected, you are currently not connected to any network.")  I don't see it on my network and sharing Center which States: "not connected wireless connections are available." In terms of network it shows that my PC and then the line that has an x on him. If you click the x, or select diagnose and repair, he informs me that all is going well with my computer. If I go to connect to a wireless network, it shows that I'm connected to my network ready. I open one of my browsers and they all work very well, I can access any site without problem. I was not embarrassed with him at the time, but since then I moved into a new House and have a new service and everything, with this motorola modem cable. my new wireless network is a network unsecured, which of course, I want to fix it. I can connect to this network, but I can't access it through Windows properties to make sure. I read the manual of the modem, telling me to connect through an ethernet connection and access configuration manager using the ip address of my router on a browser, but which does not charge or the other. I have other devices (Ipod Touch and PS3) wireless I got other people come computers and they all detect the network but cannot connect to it. Thanks for any help.

  Hello
   
   
  I would like to ask you a few more things.
  1. how many network connections you have created?
  2. are there multiple NICs installed on the computer?
   
   
  Since this is a common problem and many users have solved this problem by using different methods.
   
  This can also occur if you frequently use several type of internet connections such as dial-up, Ethernet and LAN.
   
  As the article below also indicates that there could be multiple reasons for the same.
  The network adapter icon incorrectly displays a red "X" in the window management in Windows Vista network connections when the network adapter is connected
  http://support.Microsoft.com/kb/945925
   
   
  Method 1.
  I ask you to remove any network connection if you have created and then check.
   
   
  Method 2.
  For control please check in mode safe mode with Networking if the problem exists.
  Here's how:

  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to boot mode safe mode of Windows 7 with networking.
  e. when Windows starts, use check and Internet explore if the problem persists.

  For more information, see the articles below.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Troubleshooting in safe mode
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-problems-while-in-safe-mode
   
   
  I hope this helps.
   

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• My windows Security Center does not open and I get a notice that "no software firewall is detected.

  My Windows Security Center does not open, and I am also unable to turn on my firewall.  I get notification "not detected any firewall software.

  Hello

  It seems that you need help to solve the problem of Windows Security Center. Please respond to the suite, which will help us to help you in the right direction.

  1. do you get an error message when you try to turn on the firewall?

  2. which antivirus app do you use?

  Refer to the following information and check the status of the issue.

  See the section "Nithyananda J replied on November 27, 2009" what about Windows Security Center

  The windows Security Center service cannot be started.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/the-Windows-Security-Center-service-cant-be/d8250e7a-ee3c-4302-8CA6-9e2a10262feb

  I also suggest you to run the Fixit from the following link.

  Diagnose and automatically fix problems of Windows Firewall service.

  http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us

  You can also try to solve the problem by running SFC scan

  Make the SFC scan and check the status of the issue.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I hope this helps.

• Virtual WiFi not presentation, it disappears from the network and sharing Center.

  Original title: Virtual WiFi not presentation

  Hello

  I created Virtual Wi Fi cmd (netsh wlan), first it was created and posted his icon in the network and sharing Center, after that show how I disabled it from the network and sharing Center by clicking on the icon and pressing the button disable I pressed off it disappear from the network and sharing Center.

  Can someone help how to activate it so that I see her back icon in network and sharing Center.

  Thank you

  Hello

  You have virtual map of Wi - Fi enabled in Device Manager?

  This problem may occur if network settings are changed.

  You try to run the following command check if it helps.

  a. press on the key Windows + X.

  b. click on (Admin) command prompt.

  c. type the command netsh wlan start hostednetwork and press on Enter.

  If the problem persists, I recommend posting your query in the TechNet Forums to get help:

  8.1 Windows networking forums

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Unknown error in the network and sharing Center

  When I opened my network and sharing Center where the active networks would be just said

  'Unknown '.

  and

  "The account specified for this service is different from the account specified for other services running in the same process"

  If I open Services.msc and check the list of networks and Network Location Awareness service, both are on automatic and both connect as a network Service.

  Network list service does not work and does not give the error:

  Error 1079: The account specified for this service is different from the account specified for other services running in the same process

  I'm connected to my home network and have internet access and also a local access to other computers, it's just not appearing is not on the network and sharing Center.

  A result of this is that some of the metro apps don't report any internet connection and will not start. I currently now disconnected my microsoft account on the computer and use a local account, but the problem is still there.

  I also tried

  netsh winsock reset

  from an administrator command prompt but no change.

  Can anyone help?

  Hi Andrea,

  Please keep us updated.

  This can be shown because of missing or corrupted system files. This is why I would recommend running the System File Checker tool, which is a Windows utility that allows users to find corruptions in Windows system files and restore corrupted files.

  To do this, click Start, type command or cmd prompt in the Search box, right click invite, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  At the command prompt, type the following command and press ENTER:

  sfc/scannow

  Note: Do not close the command prompt window until the audit is completed 100%. The results of the analysis will be posted when this process is complete.

  I hope this helps. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• While error blue screen that clicked on the network and sharing Center icon

  whenever I click on network and sharing Center icon I got blue screen error and restarted p.

  Here are the event logs and sys inf.

  http://1drv.Ms/1tq4Y9M

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7600.2.0.0.256.48
  Locale ID: 1033

  More information about the problem:
  BCCode: 124
  BCP1: 00000005
  BCP2: 8530801C
  BCP3: 00000000
  BCP4: 00000000
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 256_1

  SG

  There is evidence that this is caused by malicious software.  I would like to launch malwarbytes to eliminate this possibility

  Please download the free version of Malwarebytes.
  Update immediately.
  Do a full scan of the system
  Let us know the results at the end.

  http://www.Malwarebytes.org/products

  If this comes back clean then it is related to the material, and because the DMP files mention Genuine Intel I ran the cpu stress test first.

  Try this free stress test: http://www.mersenne.org/freesoft/

  Prime95 Setup program;
  -Extract the contents of the zip file into a directory of your choice
  -Double-click on the executable file
  -Select "all stress testing.
  -Select the test of 'Blend '.  If you have already run MemTest overnight, you can run the test of "Small FFFS" instead.
  "Number of threads of torture test run" must equal the number of processors multiplied by 2 (if you use hyperthreading).
  The best way to do this is to go to the Manager of the tasks of the figure... The performance tab - and see the number of boxes that appear under the CPU usage history
  Then run the test of 6 to 24 hours - or until you get errors [b](whichever comes first)
  The selection of Test and the file stress.txt box describes the components that insists on the program.

  Stop 0 x 124 is a hardware error

  If you are overclocking try to reset your settings to standard processor and see if that helps.

  If you keep getting the BSOD here are things more than you may want.
  This is usually hardware related, defective heat, memory or processor even if it is "possible" he is associated (rare) driver.
  
  Stop 0 x 124 - what it means and what to try
  Synopsis:
  A "stop 0 x 124" is fundamentally different from many other types of bluescreens because it arises from a complaint of material.
  Stop 0 x 124 minidumps contain very little concrete information, and it is therefore necessary to address the problem as a case of material in an unknown state of distress.
  

  Generic troubleshooting ' Stop 0 x 124 ":

  1) to ensure that none of the hardware components are overclocked. Material which is pushed beyond its design specifications - by overclocking - may malfunction in unpredictable ways.
  (2) ensure that the machine is sufficiently cooled.
  If there is doubt, open the side of the case (be aware of all the relevant conditions guaranteed!) PC and direct an electric fan squarely to the motherboard. Who will rule on most cooling problems (lack of).
  3) update all drivers related to materials: video, sound, RAID (if applicable), NIC... anything that interacts with a piece of hardware.
  It is best to run the latest drivers anyway.
  (4) update the BIOS of your motherboard according to the manufacturer's instructions and clear CMOS.
  Their website should provide detailed instructions on the brand and model-specific procedure.
  (5) rarely, bugs in the operating system may cause "false positives" 0 x 124 events where the hardware wasn't complaining, but Windows thought otherwise (because of the bug).

  
  At the time of writing, Windows 7 does not have to suffer from a defect, but it is nevertheless important to keep Windows up-to-date.
  6) trying (stress) test these hardware components that can be put to the test artificially.
  The most obvious examples are the RAM and HDD (s).
  For the RAM, use the 3 rd-party memtest86 utility to run several hours a test value. (6-8 passes to stress the ram)
  For hard drives, verify if CHKDSK /R finds any problems on (s), including "bad sectors".
  Unreliable RAM, in particular, is mortal, as well as software, and anything other than a 100% clear memory test result is cause for concern. Unfortunately, even a 100% clear result the diagnostic utilities does not guarantee that the RAM is free of any defect - only that none have been encountered during the test passes.
  7) as the last of the non-invasive troubleshooting steps, perform a "Vanilla" Windows reinstallation: just the OS itself without additional applications, games, utilities, updates, new drivers - or ANYTHING that does not come from the Windows 7 disc.
  Who stops working mitigate the problem of the 0 x 124, jump to the next step.
  If you run the "Vanilla" installation long enough to convince yourself that not a single 0 x 124 accident occurred, start installing applications and updates slowly, always stopping between successive additions long enough to get an idea of the question if the machine is still free of 0 x 124 breaks down.
  Smash back, obviously the latest addition of software may be somehow connected to the root cause.
  If the stop error 0 x 124 persist despite the above steps, and the equipment is under warranty, consider to go back and ask for a replacement that does not suffer periodic MCE events.
  Be aware that want to perform the subsequent hardware troubleshooting steps can, in some cases, void your warranty:
  (8) clean and carefully remove the dust inside the machine.
  Reinstall all memory modules and connectors.
  Use a can of compressed air to clean the RAM DIMM supports as much as possible.
  (9) If all else fails, start removing items of hardware one by one in the hope that the culprit is something non-essential that can be eliminated.
  Obviously, this type of testing is much easier if you have access to equivalent components in order to perform swaps.

  If you are in the situation to have completed all the steps above without a resolution of the symptom, unfortunately the most likely reason is that the error message is literally correct - something is fundamentally wrong with the hardware of the machine.

  
  
  More advanced reading can be found here from a MS MVP IT PRO
  http://captaindbg.com/bug-check-0x124-whea_uncorrectable_error-how-to-troubleshoot/