WiFi connectivity is lost after 12 hours on 32RL938

Hi all
I have a very strange and annoying questions on my 32RL938 aruond wifi connection.

I set up the TV and connect to my wifi at home and everything is very well four approximately 12 to 15 hours.

After leaving the TV in standby for a while (let s for example during the night) when I start it up again, I realize that, although my TV says it s connected to my local WIFI s there is no access to the drive Toshiba Places or DLNA network.

The network connection test fails also.

If I check on the router to the TV has a valid IP address and look connected, but no matter what ping test it s ip fails.

The only solution I was able to identify this problem is to restart the router.

After the reboot, the TV connects fine to my network and I can access the Internet on this subject.

What is very strange, it's my house, I have 6 other wi - fi devices (laptop, phone android, printer, Tablet, etc.) that work perfectly well as my TV shows that there is no link.

Because the ruter is not in my room it is quite difficult to restart every day.

Please let me know if you experience this kind of behavior and what could I do about it. I also tried with static and dynamic ip for television, but the behavior is the same.

> The only solution that I managed to identify this problem is to restart the router
> After reboot, the TV connects fine to my network and I can access the Internet on this subject.

For me, it looks like a problem of router and not as a problem of TV connection.

But you can also check if the latest firmware is installed on your TV

Tags: Toshiba

Similar Questions

  • Need help to understand why my WiFi connection times out after an hour?

    Windows XP Pro SP3. Dell Latitude D600; NetGear WNA1100 USB adapter

    I connect WiFi to one of the two cafes the. In two places, I get about an hour of connection, and then he falls. I use IE7 both FFox.

    In a store, I lost the connection with the error message: "this problem occurred because the network has not assigned a network address of the computer." To another, I actually get a blue screen with the error caused by the .sys associated with my NetGear app (I forget the real name until I see the BSOD - athuw.sys or something like that?).

    To reconnect, I gotta make a stop full and energized. REPAIR don't reconnect - "could not renew IP address". Even REBOOTING won't let me no reconnect - there must be a full stop and repower.

    Windows Firewall is disabled; I use ZoneAlarm free instead. Could there be a conflict? I know that ZA never remember the profiles that I put in place, although the NetGear app not.

    According to a post in the forum of NetGear, the automatic configuration service is disabled. (http://forum1.netgear.com/showthread.php?t=1133) (Yes, I have posted this question directly on the NetGear forum - no one has picked up on it.)

    If anyone has any ideas I can try (possibly some detailed instructions as I am not very savvy system), I'd be very grateful!

    Ed

    Welcome & thank you for your comments.

    Afraid we're drifting still rained off topic here, let me encourage you to start a new thread in the forum on the security of Windows XP in order to discuss the advantages & disadvantages of third-party firewall (e.g., ZA;) Comodo; (Sunbelt): http://social.answers.microsoft.com/Forums/en-US/xpsecurity/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • 311-1037 mini Wifi connection is lost after having closed the lid of the screen?

    OK, this just started to happen yesterday, my wifi on my mini disconnects now after you have closed the lid! It is never used to do this, nothing has changed hardware wise, signal is the same strength, really confusing to me.

    Someone at - it the same problem or a solution?

    I have my power mode set to do nothing when the lid is closed, so it shouldn't be disabled at all.

    In fact, it switch performance Max to max power save, then return to perf max seemed to solve my problem.

  • Satellite A100 - after only 15 minutes the WIFI connection is lost

    Hello.

    I have a Satellite A100.
    Well whenever I connect to a wireless network, after 15 minutes or if my connection is lost (each time) and I have to reconnect.
    Also at this time my network icon is spent hence time is.

    What can I do?

    Hello

    You should try to update driver wlan:

    http://APS2.toshiba-tro.de/WLAN/?page=downloads

    Read this number for more information:

    http://APS2.toshiba-tro.de/KB0/FAQ84025B0000R01.htm

  • Wireless connections is lost after count is inactive.

    My internet connection seems to be time. After that my counter top has sat idle for about 15 minutes my wireless connection is lost. I have to click on connect and wait until I can get online. I spent a lot of time on the phone with Frontier trying to get help from their Abu this question, but no one can seem to help me. No idea why it will not stay connected?

    Original title: network Ethernet NIC network adapter wireless network device

    After that my counter top has sat idle for about 15 minutes my wireless connection is lost.

    Wireless connection to what?   Sounds like a router problem, so you can get better help a forum that specializes in this (e.g. by the manufacturer, not an a Microsoft support forum).   In addition, some ISPS will not help unless you restore a direct modem connection, if it does not work properly, often so you might be out of luck to get help from this side in any case.

    Good luck

    Robert Aldwinckle

    ---

  • Internet connection is lost after 2 minutes

    In our House there are 4 teenagers - all with laptops, iphones, BlackBerry, etc.

    We have an internet connection to BT home hub.

    Everyone can connect OK except 1 latop - if using WiFi, laptop connect only for 2 minutes and he then loses the connection to the internet.

    The only way to get a WiFi connection again is to reboot the router.

    The laptop works fine when connected with an RJ45 LAN cable - problem only occurs if you use the WiFi.

    The laptop has Windows XP and Internet Explorer 8.

    The icon on the watch of the taskbar that the connection to the router is OK, and varies from excellent to mediocre according to how far the laptop is located rom the router.

    Why do I have a problem with this machine - I guess that it must be related to XP as all other machines have Vista or 7.

    Hello Gavin Duffy

    It may be possible but not likely.
    1. the system that only stays connected for 2 minutes, this problem only occurred after the settings have been changed in the router?
    2. did you check with your son that only security settings have been changed in the router?
    3. have you checked to see if this system is undergoing the same questions on other networks such as Café, the bookstore free networks or network of neighbors (the permission that they allow to connect)?
    Try to remove the wireless network profile and recreate.
    If you use 'Wireless Zero Configuration' to manage your wireless network, go to the network connections folder ("" Start > run ", type ncpa.cpl and click OK"), make a right click on the wireless network connection, select Properties, and then click the wireless networks tab, where you can highlight and then 'remove' an existing profile.
    After that you have removed, reconnect to your network and test to see if the problem still occurs.
    Thank you.
  • My WIFI connection is lost

    I have an Acer Travel Mate 2492 LMi installed with Windows XP Home Edition. When I first connected to my router it automatically finds wireless. Now after using my PC in Germany throughout the summer, I can't get a connection to the local network. I was on the phone with my provider for more than an hour but without success. My only option now is to you contacts. Please, please help before I lose too many hours of my time when it could only be a short-term solution.

    Thanks a lot, a lot in advance!

    Hello!

    Normaleweise kann ich mit der Maus rights in der Taskleiste klicken und sehen wer Nahe der eine connection Hat. Dann thankyou ich nur mein Kennwort typing (router vom) und damit OK. DAS geht aber nicht mehr. Write aber auch ICH mit mobile mein Ersatz über dieser und auch jetzt DRAHTLOS router.
    Jetzt ist Meine which am Ende und ich sitze stunden lang dran, obwohl ich so viel zu tun habe.
    Ich bin sehr thankful as jede Hilfe. Am besten schritt fur schritt und clearly to as halb idiots!

    Bitte Sie zu schreiben in English back going. Google ist especially schlecht vom Deutschen ubersetzt ins Französische.

    Make sure that the button marked 4 in this picture is lit--> http://skydrive.live.com/embedphoto.aspx/.Public/Acer.jpg if the button is not lit, press it.

    Follow these steps:

    • Open a command prompt window (start > run > cmd > OK)
    • Type the following lines in the black command prompt window and press ENTER after each line

    ipconfig/all > "% userprofile%\Desktop\ipinfo.txt".
    Notepad '% userprofile%\Desktop\ipinfo.txt '.

    • Copy the contents of the Notepad window and paste it in your next reply
    • You can close the command prompt and the windows Notepad and delete the file ipinfo.txt to your desktop.
  • The Internet connection is lost after installing Windows update

    Original title: put automatic has caused the loss of access to the internet

    After that the last automatic updates have been installed on the 8/17 or 18, I lost the internet connection.

    I had to restore my computer to an earlier date. When it was complete, I had access to the internet.

    I have reset my updates for having me choose when and which ones who.  When I install the updates, how can I know who we are at the origin of the problem.  In addition, how will I be able to solve the problem?

    Hello

    What is the error when you try to access the internet after upgrades?

    Method 1: Update the network drivers

    I suggest to update the network drivers, then try to update and check if the problem persists.

    Updated a hardware driver that is not working properly

    http://windows.microsoft.com/en-US/windows7/Update-a-driver-for-hardware-that-isn ' t-work correctly.

    Method 2:

    We can find the update by installing the updates one at a time, the origin of the problem.

    To do:

    1. click on Start, type windows update and press enter

    2. click on check for updates in the left pane of the window

    3. when updates are found, open the list and select one at a time and install them.

  • Connection iSCSI lost after upgrade


    After having upgraded my HP Proliant DL380 G7 of ESXi 4.1 to 5.1 U2 ESXi, I lost my iSCSI connection.  Fiber connections are fine, no question here.

    I use the flavor of HP ISO updated via the Update Manager.

    I would be grateful if someone who took this expericnec and is committed to it please share what has been done to solve this problem.

    Thank you

    This is the network driver for this adapter for VMware vSphere 5.1

    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=3913538&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4141%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

    The current version of the driver is: 5.0.636 (February 18, 2014)

    It is possible update 2, put in a new driver by default in it or put a driver that simply doesn't work properly with this network adapter.  Is this the only nic you use iSCSI for?

    You should really spread your connections on two just physical NICs wrap one of the network adapters fail so you don't lose your iSCSI connection unless you can suffer a loss to your iSCSI and it's not a big deal.

    Here's the Vmware KB article how to check which version of the driver of network that you are currently using:

    VMware KB: Determine what storage driver or network is actively exploited on ESXi host

    The document talks using the update command to update the driver, but it is my experience that its better to just do an uninstall / install, but you can try the update, assuming that this is a driver update.  I have a feeling it will be a lower version than what is currently in place.

    You will use the following command to install or update:

    software esxcli vib install zipfilenameofdriver d

    or

    esxcli update software vib - v vibfilenameofdriver

    I also found some installation instructions in the zip file

    Hope this has helped

  • The laptop to my WiFi connection becomes limited after going on my laptop for a while

    Details
    Laptop model: HP Pavilion 15-n083sa
    OS: Windows 8
    Network card: Qualcomm AR9485 Atheros 802.11b/g/n WiFi Adapter

    Hello, I got new laptop on December 27. I was enjoying it until December 30, where I started to keep losing linking where my Skype calls would end, and my pages Web wouldn't load. I'd say I was on a connection limited despite the fact that I'm in the bathroom in front of my Home Hub and get the strength of the great signal on my more devices. Disconnect and reconnect seem to fix, but it's getting annoying that I can't play games online for about 15 minutes without having limited access.

    I've tried a few things to fix as in making sure that the "allow the computer to turn off this device to save power" box is unchecked, but I still have the same problem. "
    Any help greatly appreciated.

    Hi Sam,

    Perform the steps suggested by RTBones from the link below and see if it helps.

    http://answers.microsoft.com/en-us/windows/forum/windows_8-networking/limited-connectivity-on-windows-8-pro-installed-on/c2e03e84-5803-4caf-9b5f-7790724c0794?msgId=da20609e-2b69-486a-a266-c0f9a7a2f740

    Answer please if you have any questions.

    @thomas... Also, you can try the following steps

  • My wifi connection is lost when I open YouTube

    MY WiFi for iPhones loses whenever I open YouTube

    -Restart your iPhone

    -J' forgot the WiFi network, then reconnect

    -Turn off your ram: press and hold the power button / stop, and when the cursor comes up press on and hold the home button until screens goes home

    -Close applications: double-click on the "home" button and swipe to close applications.

  • Shared folder permissions lost after several hours

    Hello

    I have problems with a shared drive mapped, sitting on a Forefront TMG server on the same domain.

    The problem is that I had access to a folder on the TMG server logs. Everything works very well for about 6 hours and then I lose access and I get an error message indicating that I do not have the permissions to access the folder, even if I do.

    Both servers are running Microsoft Server 2008 R2 64-bit.

    The two are running Mcafee anti-virus.

    Please help urgently, as this becomes a problem enough.

    Thank you in advance.

    Kind regards
    Robbie Flynn

    Hello

    The question you have posted is related to professional level support. Please visit the link below to find a community that will support what ask you:

    http://social.technet.Microsoft.com/forums/en-us/category/forefront

  • HP Officejet Pro 8500 has: WIFI connection to printer after moving from a computer in another city

    I recently moved from Nevada to California with my printer.  I can't go to the printer.  The wireless light is lite. The printer has worked with this computer I Nevada. Promp in window says "printer is unable to connect to the server.

    "You can connect to the server through a proxy server" what is a proxy server address

    Hi @Raggetty ,

    I understand that you are having problems with the printer via the wireless network. I will definitely do my best to help you.

    Since you have moved, you must install the printer on the network.

    If you haven't already done so, restore the default settings of the network printer. Go to configuration, network, restore default network.

    Then set up the printer on the network again.

    Follow this document:

    Configure the printer to a wired network or wireless for the HP Officejet Pro 8500 has e-all-in-One Printer Series.

    If you need help to set up the printer on the network, let me know.

    Good day!
    Thank you.

  • Dell Inspiron 17r keep losing wifi connection

    Hello, I got my inspiron 17r since this Christmas. its obviously still in very good condition because there is not even a year yet. However, after about a month of having my computer I noticed something he did which was very annoying. the wifi connection is lost at random for about 2 minutes and then connects to re. Meanwhile, I can't load pages or anything. When he started to do this, it would occur only about once every 2 hours, but it gradually got worse and worse to the point that I cannot yet access the internet with it more. I start and it has no connection, then connects to the wifi for 5 seconds and then he loses again. Here's the deal, this only happens with my computer on all the computers in my family. I have a very good wifi connection because the connection has said 'good' each time it connects and this problem never happened with my last computer which is a toshiba. I know for a fact that this isn't a problem with my wifi at home because I brought my computer on a trip through the country before and it happened again. I got the help of a dell agent before and he gave me a link update some drivers which I don't remember. This has helped the problem a little bit for maybe a week or two, then it started to do it again. Please help me this is ridiculous, how does this happen considering how new and costly, the computer was

    Only solution is to use a usb wireless adapter or run an ethernet cable which defeats being wireless.

    Well said, their warranty covers only the hardware so I tell everyone to stay away from a product sold with a well-known problem

  • Loss of WiFi connection and screen flickering on T440p (external)

    It is a brand new TP T440p and I installed a new copy of Windows Pro 8.1 on it (fired). I applied all the updates of Windows and installed all updates of drivers/BIOS Lenovo system update.

    The computer works fine, but when I put it to sleep and wake it back up, the external monitor is almost always flickering (there is a movement of 1 mm left and right, line by line - I'll shoot a video, if the camera is capable of capturing the movement, because it is very "thin"). Sometimes it stops after a few minutes, but most of the time that I need to re - start the computer.

    In addition, not always, but several times WiFi connection is lost and I cannot reconnect unless I restart the computer.

    It is a BIG productivity killer so I would appreciate help from anyone who knows what could be wrong. Thank you.

    Here are my characteristics of system in detail, if it helps:

    http://postimg.org/image/6lht2o8ut/

    EDIT: here's a video of the flashing screen: https://www.youtube.com/watch?v=zV38PC_a0l4

    Change the 720 p video and capture full screen in the view of the anomaliy. Thank you.

    I solved all problems by installing the latest drivers from Intel (graphics & WiFI) and Nvidia.

    All I can say is - use not the Lenovo provided drivers. After you have installed Windows 8.1, just run all the updates and search the latest drivers manually. Drivers Lenovo just foires my computer. Guys not happy.

Maybe you are looking for

  • confusion of iCloud/iPhoto

    I tried announces the following last night, but was denied a position. (problem discussed in another post that was hosted by.) The last paragraph is an update on what has happened during the night. How does the process of transfer to iPhoto/iCloud? I

  • How can I start system recovery disks

    Hi - I was sent 2 system recovery dvd and an additional drive by hp. I put them in my player and nothing happens. How can I start this procedure? I thought maybe what I have against hepatitis a to do was wait until it starts automatically (didn't hap

  • Microsoft Power shell in Exchange 2010 script

    Hello all,. I'm new to this forum, hope am clear in what I am asking here if it is clearly please update me. I am trying to download photos in bulk to Outlook 2010 using a script that I used to run PowerShell (Exchange Management Console). However he

  • Get the message that indicates the print spooler service is not running

    Printer to work, cannot get message reads "the print spooler service does not work.

  • Windows U2713H, DUCCS, 10

    I have a Dell U2713H for which I also bought the calibration tool X-Rite I1-color display for use with the display of Dell and the Dell UltraSharp color calibration Solution Manager. Which is excellent for Windows 7 and 8, but I need to use it on a W