Shared laserjet P4015n prints the first job and ignores the rest

Similar Questions

• Cannot print on the HP LaserJet 4050 printer - "the printer driver is not installed. Can't find a Package of basic driver required by the printer driver Package.

  Running Win7 32 bit.  Have had the printer HP LaserJet 4050tn installed for 2 years.  It is on the network and is always accessible from other computers on the network successfully.  I was printing to it in a billing program web-based when my PC froze.   Rebooted and was no longer able to print to it.  Tried to delete the printer, the spooler of compensation / Max ', and re-installing the printer with drivers downloaded from HP (tried the standard and universal drivers).

  When I try to install the printer I get a message "Player of the printer was not installed.  Can't find a Package of basic driver required by the printer driver package"

  I have a Brother MFP 2820 it is USB and it works very well.

  Any help would be greatly appreciated

  Try HP Print and Scan Doctor
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c03286146

• LaserJet P1505n - "printer off-line" message and will not be printed

  I use MAC OS 10.8.4. connected to the printer via the ethernet connection

  Have had on and outside messages as the "printer is not connected" and it will not be printed. Sometimes, I can't print a day and may the next day.  All connections are correct.

  I followed the suggestion online HPs and deleted the name of the printer in system preferences - print and scan. Turned things market according to the guidelines. Supposedly I should be able to add the printer, but it will not be displayed in the list of printers. Cannot reinstall from the disc because there has been updates.

  Now am stuck with how to make it work again.

  Thanks - I can try your suggestions. The firewall is all that came with my iMac and has never been a problem before and I made no changes to it recently.

  Before I try something that will help me get the printer displayed in the selection list so I can add it to my System Prefs?

  Is it possible download the drivers from the HP website?

• What causes a Color LaserJet 3525 print only Extensible task and nothing else?

  I enclose a printed copy of what should be a configuration of a Color LaserJet 3525 page. As you can see, there is no text of any kind printed but only finger stretch marks. I am also attaching one of the pages of the diagnostics output. As you can see, only magenta print whatever it is readable.

  The printer went out of warranty two years ago, but worked well so far.

  You problems with the black and yellow toners or problem with the scanner to the laser/for these colors. The easy way to test is to go to the diagnostics on the printer menu and choose the item disable check cartridge. When the printer says ready, diagnostic mode, open the front cover and do switch the magenta toner in the black slot and in the yellow slot cyan toner and toner Black, then put in the slot of magenta and yellow toner in the cyan slot. Now try and print a page of Setup again and post the results. If you now get a magenta print which is good, which would indicate that the black toner, and I think that the yellow toner are bad. If still the same problem I think you meet / scanner laser or high-voltage issues. You can also do engine test again to see what lines appear on the page. Keep in mind that the person above you wanted the diagnostic with the installed trainer test.

• How to print a message longer than that of the computer screen? I tried to scroll down to print the rest but it still prints only the upper part.

  If it please help as soon as I'm in a billing dispute regarding & e-mail that I try to print an electronic receipt.

  Hello

  When you have multiple pages to print, when you click on print, you'll get a configuration of the printer option, you can select the range of pages at all.

  If you select the scope of all pages you can print all pages.

  It will be useful.

• DeskJet 3520: Unable to print the map of wedding stationery

  I have a card that appears to be too thick - it sticks in early printing, then moves along and print the rest of sheet well. The card is sold as 'wedding stationery' and is thicker than the card I normally use. Should which option I use to print on this map?

  Thank you

  @Djinnie

  Printer:

  E-all-in-one printers HP Deskjet 3520

  The printer specificationsincludes a list of the weight allowed for various documents:

  Status bar	Type	Weight	Capacity (depending on the weight of the paper)
  Feeder	Paper	64 to 90 g/m² (16 to 24 lb)	Up to 80 sheets
  Envelopes	75 to 90 g/m² (20 to 24 lb)	Up to 5
  Index cards	Up to 200 g/m² (110 lb index maximum)	Up to 20 or 40
  Photo paper	Up to 280 g/m² (75 lb)	Up to 30
  Output tray	Paper	n/a	Up to 15
  Envelopes	Up to 5
  Index cards	Up to 10
  Photo paper	Up to 10

  "Medium stock paper / card.

  Look for a setting in the printing preferences for the type of media "brochure", thick, or similar paper.

  "Very heavy weight paper / card stock.

  You might be able to fool the parameter defining the type of support to some kind of Photo paper - this media (paper kind) allows a weight up to 75 lbs/280 g/m.

  Reference:

  Printing options

  Comment

  In my opinion, unless you want to print the notice yourself for some reason, this might be the time to look for a local printing Service company that can help by printing the invitations for you with your special message / staff.

  You can provide the staff of print service with a sample of your message that is printed on plain paper.  This way you are not tempted and then perhaps overwhelmed with choices that may be other than what you have already decided.

  Why use a printing Service?

  • This printer also beautiful be, isn't able to print invitations from the way you expect.
  • The invitations are likely to be expensive and perhaps not easily replaceable.
  • The test phase may exceed the number of invitations you want to risk.

  If you do, you could remove this in your list of items "I do" and entrusts the care professionals.

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• Colormunkie Photo printer profile (*.) ICM and *. ICC) are not seen by LR4.2 in the Print Job section

  Colormunkie Photo printer profile (*.) ICM and *. ICC) are not seen by LR4.2 in the Print Job section

  I used Colormunkie Photo to create a. ICM file for printer calibration.   Faulty when I tried to change the suffix to. ICC under any circumstances he LR4.2 view the file in the menu to select the printer profile.  There are several folders display with two suffixes but no printer to all files.  I tried three times unsuccessfully and cannot think of anything else to try. The first two were the same.  I varied the creating file name suffix in the third.  Help will be appreciated. My OS is Windows 7 ultimate SP1 HP laserjet 2550 L printer.

  Only profiles with the RGB color space appear, with CMYK color space profiles are not displayed and cannot be used by LR.

• When I share HP LaserJet 4200 printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file missing

  Original title: Reader for printer HP LaserJet 4200 for Windows 7 gives problem

  My hp laserjet 4200n printer is connected to a print server of XP through the parallel port, when I share this printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file I already Miss down site fromhp driver loaded but invain.

  Please suggest

  Hi Mohammed Arif a. R,.

  You can try to plug the printer again and check the updates of Windows and see if the drivers are install.

  Install Windows updates in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  You can also view the following HP Web site and try redownloading drivers and check.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=84033&prodTypeId=18972&prodSeriesId=84028&swLang=8&TaskID=135&swEnvOID=4063

  Also check out the following link and try the suggested steps.

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Note: This article also applies to Windows 7.

  Hope this information is useful.

• Error 0 x 00000709 when you try to delete the print job and/or pritner.

  Original title: error 0 x 00000709.

  I have a dell laptop running windows vista Home premium SP1 with a 64-bit operating system.  I tried to remove a printer HP 1310 on my computer and it is stuck on "suppression of 1", I stop, then restart the printer spooler and now I have error 0 x 00000709 when you try to delete the print job and/or pritner.   What can I do to remove this printer.   I installed a Canon MX330 printer, but due to the printer HP being locked, I can't print with a PictBridge compatible printer.

  Hi LauraD,

  You can try to remove the printer from the safe mode and check.

  Step 1:

  You can read the following article to start in safe mode:

  Start your computer in safe mode

  Step 2: Remove the printer.

  You can read the following article to remove the printer.

  Add or remove a printer

  After deleting the printer, you can start in normal mode and try to install Canon printer.

  Hope this information is useful.

• HP Color Laserjet 3600n: printer says ready, but none of the printing jobs

  So my printer worked very well; I need to fill my Cyan toner but has found a way to move that and print in black only. That worked for a while until this week. My printer cannot print; all jobs are located and there is an error message. Is it possible that my lack of Cyan takes a 'fee' If you want? I honestly don't know what else to do and it is imperative that this printer it works not just makes things easier for my situation of work in my office.

  Help! I rebooted I know how to stop the calibration, but the latter let him calibrate to see if that helps. Nothing.

  Hello, to test the connection type printing and make sure it is not the print job to disconnect from the network, restart the machine and try to print a circulation of internal test. If it works, then reconnect the network cable on back in and see if the work in Quebec will be printed. If it does not and shows the error, delete the task, restart the machine and try to print the same job or another job and see if it works. Basically, sounds like a 49 error situation.

  I hope this helps...

• HP LaserJet M402dn: The printer LCD is white and white

  I have a printer HP LaserJet M402dn with a white LCD display screen. When the printer is on, the LCD lights up, but does not display any text. It's a cable network printer that has no problem printing the case.

  I made sure that the printer is plugged directly into a socket, updated the firmware of the printer and have perform a reset forced by holding the power button while it is turned on and once again all unplugged and turned off the power. I can reach the printer using its IP address, but I don't see all the internal parameters that may interfere with the LCD.

  This printer is still under warranty after serial number: (deleted content). Should what steps I take?

  Hi LauraWolfe,

  Reading your post it seems that you did the basic troubleshooting steps that I would recommend.

  Because your printer is under warranty, I recommend you contact HP customer for resolution.

  Here is a link to the support site where you can submit a case: http://h20566.www2.hp.com/portal/site/hpsc/public/scm/home?lc=en-US&cc=US&sp4ts.oid=7458627

  They can check additional troubleshooting steps, or to arrange for a repair.

  Jean

• LaserJet M602dn print on the front and back instead of simplex

  Having a strange problem with new m602 series printers.

  A form (2 pages) is sent to the printer. on LJ 4100, 4300 and 4015 everything is printed as usual with two sheets of sepereated.
  But when you print the printjob even with the same settings on a m602dn printer configured to behave like the others, the STI document printed in duplex mode.

  I stopped to check a print job to the print queue of the printer there it says no duplex is enabled - on the printer itself settings say "duplex unit: installed - as we also print duplex jobs if these are defined as such.»

  Why the new printers don't print job settings?

  Or is it a new setting that would explain this behavior?

  PS: testing the lates firmware version...

  Thank you very much for your help.
  other printers of course are all two-sided. As you wrote that the text prints by default using the printers I looked inside again and I found my solution:

  In "Bedienfeld-Administrationsmenu' - 'Standarddruckoptionen' there is a new parameter called 'Seiten' (pages) - this can be set to 2 or 1 - by default it is set to 2, so I think it means front or front for printing uncontrolled.
  Sorry, I do not have the translation English enabled on the printer - so maybe someone can translate the menu equivalent entries.

  After changing, it prints the document appropriate on pages separate and not more than duplex. Double-sided print jobs are also printed in duplex.

• I select "reverse" and the printer still prints on page 1; How to print the last etc., first page

  I select 'inverse', so the printer starts to print on the last page and ends the first and it still prints page 1, leaving me to CPlacez pages in the order manually.  How to do this.  My last HP had no problem;  I have a 6100

  Please try this:

  1. Enter the control panel > devices and printers.
  2. Right-click the printer icon, click Printing Preferences.
  3. Select the Advanced tab.
  4. Set the order of the Pages as back and forth.

  Additioanlly, check the same setting applies to the program you use as custom preferences can be kept for a specific program:

  Open the file that you want to print, the click file > print.

  Click Preferences, and then check the order of the pages defined as Front-to-Back.

• HP Deskjet 1000 printer - just changed the black cartridge for the first time and now it will only print first half of the page. Can anyone help

  HP Deskjet 1000 printer - just changed the black cartridge for the first time and now it will only print first half of the page.  Can anyone help

  Hello Gloria,.

  I ask you to execute methods in the following link and check if the problem is resolved.

  Solve printer problems

  You can also contact the manufacturer to find out how to clean the print head.

  http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en

  Please get back to us with the State of the question.

• Canon i850 printer shared by Windows XP and Win7 does not print the entire page

  I've just updated my Vista laptop to Windows 7 as a place to upgrade. All migrated without problem except this shared printer. I downloaded the updated driver from MS download the catalog and the Win 7 Add the fron Canon pack I have installed in that order. The printer is connected to the desktop from Win XP to USB and is configured as a shared printer. Windows 7 sees the printer and also its status but print a test page prints only the windows of the flag in the upper left corner of the rest of the page is empty. Print directly to the printer under Win XP works perfectly. All ideas are welcome. Thank you.

  Well, I've had sorted it here's what I did:

  Removed all instances of canon i850 of devices and printers in Win 7.Rebooted, and then at the Run prompt run this command, "Printui/s/t2" without the quotes... Removed the i850 canon drivers and packages, then restarted again. Then I turned on the printer and plugged into a USB port on the computer to Win7... It installed the driver for me to Windows Update and a USB driver. I then added a printer shared in devices and printers selected local printer and set up the port as: \\xp computer name\share name\. I chose the same driver in the list that was created previously Setup USB canon i850... Restarted then installed the Canon Add / on module: aomwin110ea23us.exe. Restarted again... NOW, I CAN PRINT!

  Nice day.