Shared-relay

Similar Questions

• Variables shared on the CFP becomes zero and communicate with the PSC

  I use a PC with two network cards, one on one wired ethernet, the other on a private IP directly connected to a PSC-2120 (running 6.0.5 full). I use variables shared on the CFP and aliasing to static variable on the PC (initially LV 8.6, now 2009f2 with the same problem in both). PC variables are stored in a database of the Citadel. I have the CFP program built to run at startup, and it works fine when not connected to the PC.

  When connected to the computer all variables shared on the CFP will from time to time (almost 1/min for a few seconds) and randomly becomes zero. Even if they are resized only not to allow to become zero. I can say that what is happening because I use the variables shared as relay alarm thresholds module, and relays to suddenly slam on. I confirmed this by checking that the CFP has written to its internal flash memory card, and indeed variables suddenly are nil. On the PC it says that it cannot connect with the shared variables. This happens although LabView is not running on the PC!  Manager distributed system variables shared on the CFP are listed as (disconnected) during this time, but it continues to be able to read the correct values to live of the CFP entered the module.

  Interestingly, I have the same computer with the same configuration (and a PSC-2120 different) that does not have this problem. Both PC's are new from the factory. I tried to disable the second ethernet adapter, closing all wall-lights/virusscan and re - order network cards in windows networking/advanced settings without success. Simply disconnect the cable between the PCP and the PC does not cause this problem and shared variables become zero does not trigger the network on the CFP monitoring parameters.

  My questions are:

  (1) this problem can be fixed?

  (2) lost communication for a few seconds is OK, but given the PSC variables become zero is not. Can I stop the variables of the PSC to become zero?

  -David

  To update my previous post, it turns out that the re-installation was not the solution (the problem of variables start again occurring began). I finally realized that this only happens when I put the CFP time server IP (under Additional Configuration to the MAX). I was upgrading the server time on 192.168.1.1 IP (the IP address of the adapter of the CFP has been directly connected to). However, this compensation setting solves the problem.

  I do not think that the time on the CFP must need to be addressed too often (and perhaps it is synchronized if I never re - deploy files to the CFP?), so I guess that leave it empty. Curiously, I have the same setup time on an another PSC server IP and PC (running LV 8.6) without problem.

  -David

• Media sharing

  I'm trying on the part of media to an XP machine. When I go into media player for sharing, the computer Iam trying to share to does not not as an option.  All of the suggestions.

  Hello tanner Steve,

  Thank you for visiting the Microsoft answers Site.

  To better help, please relay if the PC under Windows XP is connected wired or wireless.

  In addition, the computers are connected using the same router?

  You can check the link that includes the sharing of media information and Windows Media Player 11 below.

  Share your media

  Thank you

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• sharing is only working for some websites of Internet connection

  Wi - Fi my laptop is steady as a rock, but the wireless adapter I have for my office to cancel very often, so I decided to connect both via an ethernet cable and use internet connection sharing so that the Office can enjoy wireless laptop. Both computers have Windows 7 Home Premium installed.

  The Installer seems to work, but only for some Web sites - for example, it has no problem to connect to google and microsoft.com using ICS, but he absolutely refuses to connect to facebook but also many other Web sites. My laptop has no problem connecting to websites that my office cannot connect, so I'm puzzled as to why it seems to be able to relay connecting to some Web sites, but not others. Can someone help me understand what is happening here, so that I can access more than just pieces of the internet on my desktop?

  I'm sorry, but you can understand how annoying it can be when someone does not even time to read your question and posts nothing but completely irrelevant, canned solutions (who would would realize that they were not relevant if they had taken the time to read it instead of just copy - paste * based on the title of the post). It's worse than no help at all, because then people who might bring if not actually useful assistance will see oh, "this question has already been answered" and move to one that was not. In any case, I'll try to ask in this forum. Thanks for the suggestion.

• The Adobe Labs Cirrus Server does support Shared Objects?

  Anyone know if the labs of adobe cirrus free service provides support for remote shared objects?

  Im trying to use a remote shared object to communicate between instances of my NearID flash application.

  Synchronization event does not fire after setting a property on the shared object, no errors are triggered either.

  function initialize (): void {}

  try {}

  SO = SharedObject.getRemote (false "distinctive sign", NetConnection.uri),

  }

  catch (error: Error) {}

  status_textbox. Text = Error.ToString;

  }

  SO.addEventListener (SyncEvent.SYNC, syncUpdateHandler);

  SO.addEventListener (NetStatusEvent.NET_STATUS, netConnectionHandler);

  SO.connect (NC);

  SO.setProperty ("nearid", NC.nearID);

  }

  function syncUpdateHandler(event:SyncEvent):void {}

  status_textbox. Text = "Sybc Trigerred ';

  }

  The help is much appreciated, thanks in advance.

  the name of Cirrus service code does not support shared objects. Cirrus isn't FMS.

  the * only * things done Cirrus are: accepts client connections P2P Research/introduction by peerID, bootstrap group RTMFP (via "server channel" if active group) and a short message relay function.

  things Cirrus does not: save data, stream video on demand, relay of client-to-Server stream between connected clients, shared objects, scripting on the server or any other function FMS side performs.

• Photos shared on iOS devices use data?

  I have created a number of shared albums in the Photos on my Mac and iOS devices.

  When other people visit then shared albums, what data are used to access?

  I invited a person to see a shared album which had mobile data off on their iOS device and no wifi. However, they were able to access a shared album which surprised me because I assume they would have need of mobile data or wifi.

  Shared albums are stored locally on the iOS devices. Photos downloads smaller and optimized versions pictures of an iPhone. iCloud, sharing photos - Apple Support

  Once shared, pictures taken with your standard devices, iOS devices or cameras have up to 2048 pixels on the long edge. Panoramic photos can be up to 5400 pixels wide.

• sharing between two apple ID

  How can I share contacts and calendars between two Apple ID?  Also my wife and share our music iTunes between our IDs?

  See the following topics:

  http://www.Apple.com/icloud/family-sharing/

  Family shares - Apple Support

  Implement the family sharing - Apple Support

• Are automatically shared Contacts with the members of the family of a device for all devices of the family? One device uses IOS9 and others are using IOS10.

  Members of the family can share Contacts?  A member of the family is on IOS9 and others are on IOS10. Our calendars are sharing but not our contacts?

  No, sharing of family does not share Contacts. He shares:

  Purchases

  (If you are registered) Apple's music

  Family Photo album

  Family calendar

  Location sharing

  Find my iPhone

  Apple - iCloud - family sharing

  See you soon,.

  GB

• Why E-mail stopped to relay my ISP?

  I had my server running beautifully for serval months now.  Last Friday, we noticed that some of the emails from our office did not reach their destination in a few minutes. Some would take hours and days. I could very well receive emails. We organize our company e-mail service in the House on a mac mini with OX 10.11.6 5.1.7 server. In case of problems today, I determined that the implementation of relay on the server is correct, but when I need local customers send the relay through our server it fails. If I uncheck this requirement, local customers can send very well.

  

  The requirement of relay works well until last week. Without going through this may very well at the moment, but it seems counter-intuitive. Is there a problem with the installation of relay that needs work to update or rinsed out properly?

  Now that I have turned off the outgoing 'Through ISP mail relay' switch I received a call from a person in Texas who does not work for us. He received an e-mail from his home account to our domain name.

  

  It doesn't have an e-mail account in our system. How is this possible, and is this power flowing through our mail server?

• How can I protect some files of the icloud sharing in the sierra?

  How can I protect certain files from the desktop to icloud and sharing documents in the sierra?  Some of my data is private and I don't want it in the cloud.

  Do not put them in the Documents folder or on the desktop.

• photo sharing does not work as it should in the Sierra of the BONE

  I took 11 pictures yesterday, and I want to share only 3 of them. I highlight the 3 photos, click on sharing of arrow, and pictures of 11 highlighted.

  Are your 11 photos recently imported into an album, and id you select in an albumen?

  There has been some reports, selection of photos to change the batch does not work well, when photos were selected anywhere, but in the tab 'Photos' smuggled to the full album can be selected, even if not all photos are highlighted.

  Try, if you can select the photos in a moment to share your photos select only.

• Video metadata date is incorrect: the value and not of creation date sharing

  10 iOS, iPhone 6 +, Windows 10. Photos and videos are shared through iCloud, but NOT stored in iCloud.

  Once synced on my PC, the photos and videos have a truncated name (for example, "016a1f2e11dfcc680e1009cb96346b67678fb2c6bc.jpg"). Of course, this is not acceptable at all to me when I organize them on my NAS: I prefer a significant, sortable name, as "2016-09-16 18-15-20259 (Apple iPhone 6 more) .jpg.

  To do this, I simply read the EXIF information directly from the image, and I rename the image accordingly. No problem for the photos.

  But for videos... I do the same, in the world, but with less information. I can extract only creation date/time from metadata of the videos, not the unit that captured video. Sad, but I have not found anything else, and at least it's automatic.

  Recently, I found that the date in the video file is NOT correct: this is the timecode of SHARING via iCloud, not the timecode CAPTURE. I have therefore some videos with a delta of two weeks between the true creation as well as the "official" date

  I checked this on my phone: date is correct (once the video is no longer in full screen, the date is displayed at the top of the screen, and it is 'the' date I'm looking).

  So, question: How can I get the date of the 'real' creation of all these videos on my PC? It exists: it appears on the iPhone that took the video (a woman) AND mine. Information is 'lost' only on the PC, but I think it's a problem of reading of 'bad' metadata (I use FFMPEG to get currently), or the wrong file for reading (perhaps within an iTunes/database file, but didn't find, not found in the registry or the other).

  Best solution is to find something operate locally, through the command line, to do it in batch mode. A solution of GUI PEUT agree if I can automate with AutoIt (i.e. should not be a native Win32 application, not Java, .NET, GTK, QT and so on, OR must have an export feature). A solution based on the web is not suitable, but can be less boring to review each video one after another to manually check the date.

  Thanks in advance.

  In my opinion, the only way to fix this is with third-party software like this one.

• my daughter has every music we want to pass the family sharing the will she lose her purchases

  my daughter has every music we want to pass the family sharing the will she lose her purchases

  Mvangordon,

  She will be able to keep all purchases on his account.  See this document:

  Family shares - Apple Support

  Note that "all eligible songs, albums, movies, TV shows, books and applications already bought by members of the family are immediately available for everyone in the family."

  In the future if she leaves the group sharing of the family, she is no longer able to share purchases, but she will always keep its own.

• How to suppress the flow of shared photos?

  I already disabled photostream and I have not shared any photostream but also when I discovered shared space of storage left, photo stream is in place on my device and I don't see on photos app and so I would like to know how to remove my camera?

  ... Also, I have not shared any photostream...

  My Photo Stream and Photo Sharing are separate options. Check which ones you have disabled/enabled. Note that even if you don't share photos, you could download others also shared images.

  For General cleanings of storage, the best way is to restore your device.

  ------------

  -Restore your iDevice: https://support.apple.com/en-us/HT204184

  If your backup is in iTunes, make sure that it is encrypted.

• Home sharing works not

  I have an iMac works MacOS Sierra over the latest version of iTunes. All my music is on my iMac. I have two computers running the latest version of iTunes. More MacOS Sierra sharing House worked fine before upgrading to the latest version of iTunes. Now when I select a song on one of my PC, I get a dialog box (open the URL and connection), but no music. Does anyone else have this problem?

  Yes, I have the same problem with my work is laptop is not able to connect to the iTunes library via sharing home on my iMac, I installed Sierra on this weekend. Was working fine before the update.