SHAREIt will transfer files by wired or wireless network?

Similar Questions

• Unable to connect to the wired or wireless network.

  wireless network

  OK so my comcast Internet got off because my husband was laid off anyway so now my computer connecting to the tired all wireless network as power ang unplugimg cable everything is hanging Strip tight ideas?

  Hello

  1. are you trying to connect to the home or public network?
  2. what version of Windows are you using?
  3. you receive an error message trying to connect to the network?
  4. What is the brand and model of the computer?
  If you try to connect to the home network, contact the Internet service provider and make sure that the Internet service is activated.
  
  If you try to connect to the public network, try the following methods.
  Method 1:
  Wi - Fi and in Windows network connection issues.
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2: Temporarily disable the security software.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

• a6755y: a6755y wired and wireless network hard

  I already spoke with my ISP nothing helps technical support.

  I recently created my desktop computer again after having been stored for several months. Before I put it there, I was using wireless internet and local wireline connections regularly and without problem, and now I can not access to either. I have a strong connection with the modem/router device, so I thought that the issue could be in how its configuration or interpret the connection from my computer, but nothing, I have discovered has indicated that this was the case, and convenience store customer support my ISP did not find anything abnormal. I was now more confused when I discovered that it also fails to connect to another computer using a direct wired connection, even though I had in the past linked their and transfer large files regularly. I would like to assume that these issues are linked, to make the simplest solution; but as one involves a separate network adapter, and the other connects directly to the motherboard, I don't think that's likely.

  For any help or suggestion would be appreciated.

  Hi there @_GS
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you pulled on your desktop, storage and now you can not connect to your wireless network.  I'm happy to help you with this problem.

  Is this the same router that you were using before you put the computer in stock?

  How is the computer to the router? (Sometimes too much signal is as bad as not enough)

  What type of cable you are using for the connection from computer to computer, you mentioned?

  There is special software required?

  Have you other wireless devices that are connected to this router without problem?

  The following pages are useful to the resolution of the problems of wireless connectivity and can help solve this problem.  Try it and tell me if it helps.
  Troubleshooting wireless network and Internet (Windows Vista)

  HP and Compaq Desktop PCs - troubleshooting your network wireless (Windows Vista)
  
  In addition, you can watch the the power management of your wireless adapter:
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.
  
  Forget a network (Windows Vista)
  1. start network and sharing Center.
  2. in the pane tasks, click on manage wireless networks.
  3. right click on the connection that you want to delete and then click on remove network.
  4. in wireless networks handle - warning dialog box, click OK.
  5. the connection is removed from the list of wireless connections that you can view or edit.
  
  Reset TCP/IP on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.
  
  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.
  
  Reinstall the NIC drivers:
  1. download the drivers from here, but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.
  
  Test an ethernet connection:
  Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

• Photosmart C7280 will print a computer on the wireless network

  C7280 will print any desktop via a wireless home network. He has worked in the past, but stopped recently.

  It allows to print from a laptop on the same network.

  I tried to follow the procedures on the HP Support site and drivers, such as the routine HPHNDU.exe and others, but have had no success.

  I'd appreciate the help. My previous post in May has all the answers.

  Seems that the fatal error was not fatal as it appeared.

  I ran the HPHNDU again in exasperation, and it printed a test page. So, I printed another Notepad document just to be safe, and the printer now prints. There at least one test. It's good, but the scourge caused by the report "fatal error" doesn't exactly inspire confidence in HP Setup.

  I bet that it happened not when Carly was CEO.

  I'll call this resolved, although I don't know exactly what has been resolved otherwise than a very strange relocation.

  Thanks for your efforts.

  Furthermore, I never found a link to attach a file to a message.

• How to transfer files with the ad hoc network

  I was looking for a way to transfer files between 2 PCs via ad-hoc, but I can't. Can someone help me please?

  You could try: sharing files with the public folder

  http://Windows.Microsoft.com/en-GB/Windows-Vista/sharing-files-with-the-public-folder

• Laptop will not connect to my home wireless network

  I've had my laptop for a few months and my home network wireless also. My laptop has always worked perfectly until last night, I was in the living room and my phone cut because it ran out of battery. I went to restart, and when I did, NO network could be found, and several others usually appear outside my home network. The wireless switch is turned on and I rebooted the computer several times, I ran the wizards and shooters of boredom, I started the wireless zero configuration, but nothing happens. everything he says is "wireless networks could not be found", and when I click on the message, a black box appears with a message saying "windows has encountered an illegal instruction. I don't know what to do. my laptop model is a Sony Vaio, but that's what I know. My ipod connects to the wireless perfectly, so I know its my laptop that needs fixing.

  Hello

  Maybe this can help, http://www.ezlan.net/wireless.html

• HP Officejet will not be connected to the wireless network?

  I have a HP Officejet 6500 wireless which will remain not connected to the network over a half hour or so, max.  My wife runs a laptop XP Pro and I have a Macbook Pro with Snow Leopard.  She NEVER problems printing, but my computer is always looking for the printer unless I re - connect via the wirelss Wizard.  I also use a Westell 327W Versalink router/modem and I have connected my Mac via Bonjour, if that helps.  Any ideas out there?  I even reinstalled the router right next to the printer thinking that may be the issue.  He STILL abandons the connection, but it's funny that my wife's computer is not...

  OK, let's assume that your Mac software is correct for now.  Its probably a good assumption.

  We will define an IP address from the printer.  This can help find the network when he wakes fashion 'sleep':

  We will set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). In your case, is that 192.168.1.15 to 192.168.1.47 can use 192.168.1.50
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Let the gateway and DNS white. Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• Wired vs wireless network

  When I connect to my laptop to a wired network and the wireless is always on, a single connection replaces the other, or they are both active.  So late, what are the possible ramifications?

  OK, I'm sitting on the patio with my laptop on my hit, surf the internet.  I feel rain coming so I take the laptop inside, connect it to the docking station is connected by wire to my router.  It's as simple as that!

  So my network connection now on the wire, still wireless, or a combination of both?

  It uses the fastest connection automatically unless you handle the metric of the individual network manually. This article explains the process...

  http://support.Microsoft.com/kb/299540

  http://sdrv.Ms/QT8rZX

• Wireless network is displayed with a cross and will not let me connect saying the settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again?

  hardware device

  my wireless network is displayed with a cross and will not let me connect saying settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again :(

  Hello

  What operating system installed on the computer?

  Note: Look for errors in the network card device manager.

  Method 1: Follow the article mentioned below, if you are using Windows 7 operating system.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  He looks at the IP address and other parameters are not set correctly, I suggest you contact your Internet service provider or provider router wireless to help on this.

  For more information, follow the below mentioned article:

  Set up a wireless router:

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

  Follow the below mentioned articles and see if they help you:

  Set up a wireless network:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Wireless network card: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

• Windows xp will not recognize or list the wireless connection.

  Original title: we changed wireless routers and now windows xp will be same not recognize or the same list if wireless connection 3 computers in the House will be

  Under networkconnections the old wireless router, or the other is visible.   I tried toads new link also with no success

  Hello

  1. What is the brand and model of the computer?

  2. who is the provider of Internet (ISP) Service?

   

  Follow these methods.

  Method 1: How to fix wireless network connections in Windows XP Service Pack 2
  http://support.Microsoft.com/kb/870702

   

  Method 2: To create a wireless network, you can follow these steps.

  a. click Start, click run, type ncpa.cpland click OK.

  b. in the window network connections, right click on the wireless network connection icon and then click Properties.

  c. in the wireless network connection properties, click the wireless networks tab. If you do not see a wireless networks tab, your network card can not take over the automatic Wireless Configuration service.

  d. under preferred networks, click the Add button.

  e. in the network name (SSID) box, type the name of the access point, and select the parameters according to your network requirements. This setting will match the configuration of your router or access point. If you have a router or wireless access point, and then select Wireless Ad - hoc mode and use the same network name that matches other computers.

  f. click OK

  g. under available networks, click View wireless networks.

  h. in the wireless network connection dialog box, choose a network by clicking on its name and then click on connect.

  Reference: set up a wireless network

   

   

  For more information, see this article:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows?T1=Tab03

• Windows Vista detects the wireless network but will not connect to it. Two other users in the same office connect without difficulty.

  The title says it all really.

  I was connected and working normally for about an hour this morning, until suddenly the connection has been lost.
  Windows detects the wireless network but will not connect. Two other users in the same office connect without difficulty.
  Help, please.
  Thank you.
  original title: vista detection network but will not connect

  Hi JulianBeach,

  1. you have made no changes to the computer before the broadcast took place?
  2. What is the exact error message you get?
  3 is connected to the domain of the computer?
  4. what happens when you try to connect to the network?

  Try the steps from the following link:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Additional information:
  Wireless network card: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

• my pc will not connect to wireless internet... It is said there could be a problem with the driver for the wireless network connection card

  connection network card

  my pc will not connect to wireless internet... It is said there could be a problem with the driver for the wireless network connection card... I'm not sure how to solve the problem of the dat

  Hello

  Did you change your computer?

  I suggest you to follow the links and check out them.

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

• My HP laptop will not wireless networks resume. I have an ethernet cable plugged in to get internet.

  I tried to install a network and it will not be the wireless networks list when he worked later than yesterday. My wireless works well because I have other connected devices work correctly. This computer just stopped to pick up the wireless network.

  Hello

  You did changes to the computer before the show?

  Method 1
  I suggest you to check if the wireless on the laptop HP switch is turned on. If the wireless switch is off of your laptop will not pick up and wireless networks.

  Method 2
  I suggest you try all the steps from the following link:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  See also: Wireless network card: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

• Wired or wireless connection. Was not identified until the restoration of the system. Windows Vista Ultimate

  I am currently on my laptop. I have my Windows Vista Home Premium desktop connected with a wire to the internet, and there is currently no link. I can't even connect wirelessly, and yet my laptop is fine with both. It was not identified until I restored the a few days before, and now he has no connection whatsoever. Type of emergency because my business is at a standstill right now because of this.  Edit: Where you plug your cable internet on your computer, it normally has a flashing beside him, but it currently isn't. I can plug the wire into my laptop and it works fine, but not with the office. So I know this isn't a problem of modem/router, it's a computer problem.

  Hello

  Please follow the steps mentioned below and get back to us with the results.

  Method 1: Wi - Fi and in Windows network connection issues.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  See also: Internet to solve connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  In the case where the flash light does not appear, this could be a problem with the wire or the port network, so you can consider contacting the ISP (Internet Service Provider) to get help.

  I hope that helps!

• Unable to connect to my wireless network. Wired connection works fine.

  my wireless connection is working now? If I plug directily then it works on my Virgin otherwise it does not work? Help, please

  my wireless connection is working now? If I plug directily then it works on my Virgin otherwise it does not work? Help, please

  Hello

   
  1. the wired connection work earlier?
  2 - is the network even for wireline and wireless?
  
  Perform the steps in the article mentioned below and check if the problem persists.
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
  
  Hope that helps.