Sharing FCPX movie on USB

Similar Questions

• In Windows 7 cannot copy photos or movies on USB

  http://s1287.beta.Photobucket.com/user/Jo_Yee_Wong/media/capture.PNG.html?sort=3&o=0

  WINDOWS 7
  Cannot copy the photo, movies on USB port
  Original title: HELP! Library Microsoft visual c ++ runtime library

  Hello

  1 is content specific to the perception of the copy or is - this random error?

  2. is the spontaneous error or shows only when specific content is copied?

  3. do you try to import data from USB for particular software or just normally copy?

  Please follow the links below to solve the problem.

  Method 1

  Try to leave you is clean boot computer in order to eliminate the causes as interruption of third party software.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  If the copy fails again and then look for the corrupted system files.

  Method 2

  Run a file system Checker to verify system files corrupted.

  Run a System File Checker tool

  You can also try to use another USB port / device and check.

  Method 3

  Reinstall the Package redistributable Microsoft Visual C++ 2010.

  Package redistributable Microsoft Visual C++ 2010 SP1 (x 86)

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  Please let me know if the problem is resolved or if you need additional measures to help solve the problem.

  I hope this helps.

• I BDPS360 I'm trying to watch movies from USB with. All he wants to do is to remove the USB key.

  I formatted 2 USB drives to FAT32. Player does not recognize the USB or wants to erase. I'm trying to watch movies from USB. Can someone help me?

  Hello Janette,

  Welcome to the community of Sony.

  The EXT of the Blu - ray player Jack is used to connect a USB FlashDrive as a local storage device. This USB key is required to take advantage of content (such as BONUSVIEW/BD-LIVE) on certain Blu - ray Disc titles. The EXT socket cannot be used to play media files from a USB key.

  If my post answered your question, please mark it as an "accepted Solution".

• 32AV933G: is it possible to access the image user mode play movies on USB

  Hello!

  Recently, I bought a 32AV933G, based on the features and was very surprised by the good image quality.

  My question: is it possible to access the image of the user mode when playing movies media player USB?
  I can't get the preset Standard, mild, film... I can't even the Menu to adjust the settings.

  I guess that's how TV has been designed. You can change this in the next Toshiba Firmware? Please, I beg you!
  Also add some features before etc, Play/Pause, the remote control.
  Perhaps using coloured Teletext keys. Just a suggestion.

  If anyone can help with this, thank you!

  > My question: is it possible to access the image of the user mode when playing movies media player USB?

  I didn t find all the details about this in the user manual.
  So I guess that's not possible.

• Toshiba 39L2353DG: how to configure subtitles play movies from USB media

  Hello

  I'm going to have bad configure subtitles of series and movies that I play via the USB port on my Toshiba 39L2353DG

  Can someone please explain to me how can this be done?
  I would be very grateful!

  Subtitles should be stored in the srt file (srt is perhaps the most fundamental of all formats of subtitles) and this file must be placed in the same directory (folder) as the film. The srt file also supports the UTF-8 format

  Of course there are the file formats of different subtitles as idx/sub, idx/rar, smi, ssa, srt, sub.
  Then you can try all of these formats, where a format is not supported.

• Burning downloaded moves of USB flash drive on DVD to play on my TV.

  I have USB flash drive with the downloaded movies that I want to burn it on a DVD to play on my TV.  No matter what I do my TV can not read a DVD disc, and the "disk error" message keeps coming up.  I can read the disk on my PC but I don't want that!  Can anyone help please.

  Hey Nineteen-ninety-nine,

  Creation of DVD Windows is a feature of Windows 7. With Windows DVD maker, you can create video DVDs that you can watch on a computer or on a TV using a regular DVD player.

  Access the link below and follow the steps to burn a DVD movie on your computer and play on TV.

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker

  I hope this helps. Let us know the result.

  Thank you and best regards,

   

  Srinivas R Microsoft support.

  Visit our Microsoft answers feedback Forum and let us know what you think.nineteen

• Cannot see function analysis using printer sharing on Snow Leopard USB connection

  I have two iMacs connected via ethernet to a wired ethernet network cable / wireless. Previously, my PhotoSmart C7280 is connected wireless network, and I was able to scan and print from any computer using software built into Snow Leopard. Scanning and printing has been a bit flaky lately due to wireless network problems, so I just moved the all-in-one at one of the iMac, it connected via USB and enabled printer sharing. I can now print and scan from the iMac to which it is connected, but when I access it from another iMac, all I can do is printed. For example, if I open Preferences system and then select Print & Fax, I can add the printer to the list of printers OK, but when I select the PhotoSmart from the list, I don't see paws print and scan that appeared at the top of the pane that results. I can access only the features of the printer. I have already reset the printing system and start again, but still no scanning. Any ideas?

  Well Yes, that's the way it works.  It is a sharing of print - only.  This configuration will not share the scanner.

  We will work on your network issues?

• Port Replicator III + very high CPU when you move the usb mouse only in W2k

  Tecra M2 with a port replicator III +.

  It is set to dual boot XP and Windows 2000 (yes I know it is well a bit but I have a bunch of stuff installed in win2k it is difficult to find these days).

  XP is very good at 100%, but with win 2000 if I use my * USB mouse * on the * ports port replicator and waggle the mouse around - the * CPU * jumps from 0 to * 70 + % * use (System process that seems indicatates like IRQ problem). If I plug the mouse into the ports of the laptop (when the laptop is connected) - it's fine, no more than 5% cpu usage. It's a microsoft basic mouse. I really believe that this is a problem of usb any, because the cpu jumps a little if I type quickly on my usb keyboard (only a few %). It comes with the usb ports on all the Replicator.

  Any ideas? I don't really want to plug my mouse in the morning because it beats a little interest to have a docking station in the first place! I have installed mobile extensions. All other aspects of the replicator are fine

  Martin

  Huh it will not be easy to find the right explanation for this.
  At the moment when Tecra M2 has been offered on the market as Replicator port compatible Toshiba offered Toshiba Advanced Port Replicator III (no +) and at that time both supported in operating system has been tested with it.

  Toshiba later designed Toshiba Advanced Port Replicator III + and confirmed the compatibility with Tecra M2, but obviously with more recent WXP (at this time).
  So now, you've been following situation: you use most recent Replicator port, but with much older operating system so I assume that there may be a compatibility issue with W2K.

  I can't imagine use you so often with W2K and if so, may not be so problematic to connect the mouse directly on the cell s USB port.

  Sorry, but I don't think that there is nothing you can do about it.

• Cannot record movies on USB to show at the College. Offline media.

  First 12 items. All I have to is to save the 3 movies for my media course hand and lost 2 solid days. Surely it can only be done as a normal except as you would to keep on your mac? All it says when I check the content of the discs is blue for 'others' to one and there are some additional files folders, it is taking about 6 GB of space. Yet, the second is to show only is only a few MB, it is not normal. Nothing works and I'm out of time. Please can someone help. I have no idea what else to do. When I insert in another computer, it is nothing else than the media offline messages. How can I transfer it? I spent weeks trying to find tutorials, I can understand. Thanks to hope.

  Thanks for the explanation. It was exactly what I needed to know and understand in simple terms.

• A movie can be stored on a usb flash drive?

  I would you ask my camcorder recorded videos, currently stored in Photos, iMovie, and the camcorder on a USB flash drive SD card so I can read in my car on the navigation screen. How can I upload videos to a USB key?

  Yes, you can store movies on your USB.  Probably the easiest way is to drag the movies.  USB drives which are formulated FAT 32, as most of them, are limited to 4 GB in size for any single file.  Would be good to try with a movie just to make sure that your USB will play your

  navigation screen of the car in any way you are intending to do.

• Can I use Cyrillic subtitles on my TOSHIBA L323950 TV movies USB?

  It seems that the TV does not support subtitles in any language Cyrillic or maybe there is something that I do everything.
  When I play a movie from USB-flash, there are also subtitles in. SRT format.
  The video is OK, but the subtitles (in Bulgarian language) seem like some strange symbols.

  I'm trying to save the SRT file with UNICODE encoding, but in this case the TV freezes as soon as I start the videofile. I also try to UTF-8 encoding - in this case, the empty file plays well, but no subtitles are detected at all.

  So my question is: this model takes into Cyrillic SRT sub title during playback of movies USB?
  If so, why can I not see them.

  Thank you!

  I have the same problem on my Toshiba TV. Cyrillic subtitles cannot be displayed correctly. The same as symbols?,?, or can not be displayed correctly.

  So far I have t found no solution to this. Reading a few other forums other people described the same problem for the Spanish language (a e i o u).
  Firmware is the latest version, but the problem is still there.

  By the way: can you please test this method and I would like to know if it works for you.

• Adding a subtitle in a movie made the shift of the film (i.e. causes 2 second rule before title views)

  Whenever I try to add a subtitle in my film, it takes a few seconds for the title to display. Within these two following seconds, my movie made a break and then again when the title is displayed at startup. Any ideas on how to remove this delay if the title appears instantly when I want that it?

  The lag occurs after sharing the movie or only when editing?  If its only when editing it's probably because of your mac not be fast enough to deal with your instructions to change.  It may well also have some active process going on in the background.  It is more likely to occur with video, high resolution and a slow mac.

  Geoff.

• Change the channel of command USB for Tecra M2

  Hello

  Is it possible to move the USB controllers on another channel? I tried in vain to install a USB audio (M-Audio FastTrack) on my Tecra M2. Every time that I plug an error message is displayed in a bubble right - "a problem occurred during hardware installation. I called their tech support who told me that I have to contact Toshiba and ask how to channel 11 on a different channel USB drive. Can anyone help?

  Thank you
  Tom

  Hello

  In my case, it is not possible to change anything. The option to use the automatic settings is set and cannot be changed at all (gray).

  To view your current IRQ assignments, you can open the Device Manager.
  1. click on START, click on control PANEL.
  2. click on system.
  3. click on the Hardware tab.
  4. click on the button of DEVICE MANAGER.
  Once the Device Manager open, select VIEW from the menu of the toolbar, and then click resources by Type. Double-click the interrupt (IRQ) application and your current IRQ assignments will be shown.

  The list that appears on your machine will vary depending on the hardware you have.
  If you are faced with a conflict and you need to change an IRQ setting:
  1. right click on the device in the list (see above), and then select Properties.
  2. click on the "resources" tab.
  3. uncheck the option use automatic settings.
  4. Select a non conflicting configuration in unrolling of the box.
  5. click on OK
  You may find that you cannot manually change IRQ settings (use of automatic settings will be grayed out), this is usually related to the ACPI function used by Win XP as in my case.

  Note Please change system resources such as the IRQ channels can cause your computer not to work does not correctly; always take note settings before changing anything, so you can restore them if necessary.

  Good bye

• "Unknown device" USB Barcode scanner, problem with the USB controller driver?

  Hello

  I need assistance with our Barcode Scanners that doesn't work on our newly purchased computers at HP with Windows7 Pro x 64 operating systems.

  The brand and model of the bar code scanner is:

  Datalogic Heron D130 USB.

  When you connect the scanner to a USB port, Windows will try to install this as a HID, but it takes an unusually long time, about 7-8 seconds, to boot the device and install the drivers and appears as an unknown device in windows "devices and printers" and the hand scanner does not work.

  Sometimes when you move the USB back can I sometimes the scanner at hand to be recognized as an HID device or a Datalogic barcode scanner,

  It works fine until you restart the computer.

  After restart the computer cannot detect the scanner Barcode correctly without re - appears as unknown device.

  I suspect that there is a compatibility problem between barcode scanner and card USB controller on the computers.

  I tried to update all the drivers available on the website www.hp.com and same www.Intel.com (chipset drivers) but nothing has helped to solve this problem

  Tried newly bought barcode scanners and "used" barcode scanners earlier who works on other computers, but the problem remains.

  I found a workaround by connection of bar codes in a USB hub, and then plug the USB hub to the computer.  And leave the USB - hub to take care of the communication with the Barcode Scanner.

  in this case, it takes about 2 seconds for the code scanner barcode to mount correctly in windows under the heading "devices and printers" and then works perfectly, even after a reboot.

  I googled after a response after my problem, but it seems I'm the only one who experience this issue. ?!

  Bought more than 40 computers that I have this problem.

  These were bought at different times with two different for suppliers

  Computer model are the following

  HP ProDesk 1 400 P/N5S21EA

  Specifikations:

  http://WWW8.HP.com/emea_africa/en/products/desktops/product-detail.html?OID=6614160#! tab = specifications

  Does anyone have an idea what could be wrong and how to fix it?

  Thanks in advance

  Sincerely

  Robert T

  Hello

  The problem is not power - related.

  We use passive USB hubs that solves the problemon these computers.

  (it also works with the docks, or if you EliteDisplay E241 HP as we thers a usb hub 2 ports inbulit in monitor that works.)

  The problem lies in the incompatibility between the Intel USB controller and the hand scanner, can be connected to USB 3.0

  When you let another usb-controller support in handshakeing (such as a usb hub), it works.

  Datalogic or Intel would like to acknowledge this error.

  Because none of the big companies want to acknowledge the problem or repair, personally chose to switch to an AMD platform / CPU instead of the Intel and now it works fine!

  We get more performance for your money when AMD is usually less expensive to purchase.

  And because of the poor of Datalogic press where they don't even answer e-mail (their only channel for support)

  I chose to stop using their products. I'm going to use another provider / brand of barcodescanners.

• Shared folders gone

  I work with version 1.0.1 on Yosemite 10.10.5 Photos (Mac Pro Mid 2010, 2 x 3.33 GHz 6 - Core Intel Xeon, 48 GB 1333 MHz DDR3 ECC)

  Today, suddenly my files shared in the toolbar of left missing so that the complete 'shared' - option.

  It happened when someone had added a photo to a shared folder. Photos icon shows a '1', indicating that the photo has been added. But I can't find shared folders more and do not know where to see the photo.

  I am connected to iCloud and I there active streaming option as well as the photo of iCloud sharing option. I left pictures, shot these Photos options off and on again, restarted and it was the same thing.

  On my iPhone, I can see the shared folder still exists. It ist just isn't on my Mac desktop.

  Can someone help me out here? Thanks in advance!

  Do you hear, to the title of the 'Shared' section is also absent from the sidebar?  If you still see the 'Shared' title, move the pointer to the right reveal hidden ShowHide control. and click on 'display '.

  

  If even the title is missing, check if your current photo library will continue to operate as a Photo library system.  In the Photos > preferences > shared "Use as system library" option should be greyed out.

  Check your system preferences > iCloud > Photos > Options, if iCloud photo sharing is still.

  Check your Photos > preferences > iCloud, if iCloud photo sharing is still.

  The owner of the shared album may have deleted the album. Then it vanish inyour library too.