Sharing of disk and snapshot

Similar Questions

• Unable to start the virtual machine and snapshots are missing from snapshot Manager.

  Hello

  I'm new here in the VMWARE communities and I don't know if I'm posting this survey in the right place. I am currently using VMWARE Workstation 9. The issue I'm having is that I can not start my VM. The error that says:

  

  This is an overview of my settings:

  

  When I try to get a snapshot I can go back, I get this snapshot Manager screen:

  

  I checked the files on the directory of the virtual machine. The snapshot files are still there.

  I tried to solve the problem by editing the configuration of virtual machine file to use another vmdk. I got an error saying something about the parent and the child are not synchronized. Sorry I don't have a screenshot of that. I also tried to make a copy of one of the other VMDK and rename it to match with the name of the missing file. That also made me anywhere I tried looking on the net but I get answers to other vmware ESXi and vSphere products. So I don't know if they apply to my current situation.

  At this point, I'm hoping to recover my machine or at least be able to use snapshots. Please notify.

  I think that the restoration was the best way to solve this problem. I actually checked the different files, but it looks like I missed something. In any case, create snapshots with the virtual machine in a state engine is my personal preference. It is not only to save disk space (since there is no need to preserve the current state of memory), but also provides a consistent state. As for the number of snapshots, you're always on the stop side, and if you are not having issue of performace with small changes you make you should be ok. In case there is a performance problem, you may consider to store the computer virtual on an SSD that will certainly help.

  Since the Center of Documentation of VMware Workstation 10

  To the premises of the virtual machines, you can take more than 100 snapshots for each linear process. For shared virtual computers and remote, you can take a maximum of 31 snapshots for each linear process.

  André

  Post edited by: a.p. corrected fault, "SSD" instead of "SD".

• Sharing of files and hard drive between computers

  Dear Sir or Madam:

  I'm trying to connect two computers, which I named system A and system b. Computers and a DSL modem at wire speed Westel are connected to a router Asus WL-520 through ethernet LAN cables wireless/wired. HP PSC 2355 printer is connected to the router with a USB cable. The LAN on board two computers automatically configures the IP addresses of the form 192.168.x.x, which, in my view, to work. However there is no connectivity between the two computers, systems A and B. They do not see the shared disks and files on the other. The operating system is Microsoft Windows XP Home Edition, Version 2002 with Service Pack 3, n ° 76477-OEM-0015717-31545.

  When I ran the program ipconfig on each a said computer specification that IP routing is not enabled. See the configuration below. IP routing must be enabled in order to have connectivity? How IP routing is enabled in Windows XP? In the Services section of the Control Panel, there is the Routing and remote access, which is disabled and other related networking services, of which some are also disabled. What services must be enabled for computers to connect to share files and hard drives?

  Windows IP configuration

  Name of the host...: SYSTEM-A

  Primary Dns suffix...:

  Node... type: mixed

  Active... IP routing: No.

  Active... proxy WINS: No.

  Ethernet connection to the Local top-Dock network card:

  The connection-specific DNS suffix. :

  ... Description: ADM8511 USB to Fast Ethernet Sn54ls164j

  Converter

  Physical address.... : 00-50-5B-00-0A-4B

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  ... The IP address: 192.168.1.2

  ... Subnet mask: 255.255.255.0.

  ... Default gateway. : 192.168.1.1.

  DHCP server...: 192.168.1.1.

  DNS servers...: 192.168.1.1.

  68.237.161.12

  Concerning

  Peter Dooling

  Hello

  The display is OK. The routing setting this isOoff is not relevant in your case.

  ----------------

  Configure all of the computers to share files and you have a network Lcall.

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted

  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP -http://support.microsoft.com/kb/875357

  In Win XP pro you can visually see the setting of authorization/security and configure them according to your preferences.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  
  

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Why the SAN disks and drives NAS recognized differently by the computer?

  Hi all;

  I'm a newbie in the sharing of storage.
  Why the SAN disks and drives NAS recognized differently by the computer? Computer sees SAN disks as local drives, NAS drives as network drive, even if they are all connected to the computer by the same network topology.
  I knew that SAN uses the block level transfer to transfer data all in SIN use level file transfer. Is that what this has something to do with which SAN and NAS drives are recognized differently by the computer? If so, how?

  Thank you.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

• tape drive sharing between ndmphost and admin server usnig osb.

  Hello.
  It is available to share the tape drive between san usnig adminserver and ndmphost the switch?
  We have 6 lto5 disks and will be attached to the machine oracle ss7420 NDMP.
  The customer site has no backup of the customer unless the nas data.
  
  Reason why I'm asking as OSB catalogdb to tape drive backup.
  Is it safe to admin osb catalogdb backup as client or tape drive sharing is available?
  
  Another issue is that when we set up unit NDMP, NDMP host can control robot or robot control should assign to the server administrator or the two availble?
  
  Thank you.

  Yes it's available by design. You have to configure the NAS with the role of mediaserver and add a 2nd point of attachment to the device. You can then create calendars that limit to those fixing points. Allows you to share all the drives between all media servers.

  For the robot, I let the server admin to do that, just tape devices were mapped to the time. Controlling Robotics is a light enough task.

  Here is an example of one of my setups where the drive is shared between several media servers, Oracle Linux 4, Linux 5 Oracle and NetApp

  L700-1-lect1:
  Device type: Ribbon
  Model: ULTRIUM-TD2
  Serial number: 7MHHY00202
  In service: Yes
  Library: L700-1
  DTE: 2
  Automount: Yes
  Error rate: 8
  Frequency of application: [unknown]
  Debug mode: no
  Blocking factor: 512
  Blocking max factor: 512
  The current band: 999
  Use the list: all the
  In-car use: 7 months, 3 weeks
  Cleaning required: no
  UUID: 558a34da-045e-102c-8443-002264f35328
  Annex 1:
  Host: dadbdn01
  Raw device: / dev/tape/by-id/scsi-1IBM_ULTRIUM-TD2_7MHHY00202
  Appendix 2:
  Host: dadbdh01
  Raw device: / dev/tape/by-id/scsi-1IBM___ULTRIUM-TD2___7MHHY00202__
  Annex 3:
  Host: dadbeh01
  Raw device: / dev/tape/by-id/scsi-1IBM___ULTRIUM-TD2___7MHHY00202__
  Appendix 4:
  Host: ap1030nap
  Raw device: nrst1a
  Annex 5:
  Host: dadbak01
  Raw device: / dev/tape/by-id/scsi-1IBM___ULTRIUM-TD2___7MHHY00202__

  Thank you

  Rich

• How to fix error of bootcamp: no boot device - insert boot disk and press any key

  When I try to install windows using bootcamp No. bootable device - insert boot disk and press any key any that appears at the start of the installation of windows 10. any solution please.

  Thank you

  What is the year/model of your Mac?

• no boot found device, insert the boot disk and press any key

  Hello, recently tried to install Windows 10 through the Assistant Boot Camp, with the help of a DVD I bought windows. But I get an error saying "no devices found Boot insert boot disk and press a key" I tried to read and do all the patches, all offer and yet no results. Any suggestions or corrections us would be great!

  MacBook Pro mid 2012

  -i7

  Evo - Samsung 500GB SSD

  -Ram 16

  -Latest version of Mac OS x

  -L' use of 64 GB PNY flash drive

  Your Mac 2012 supported creating a USB Installer to help BC Assistant. Do not use a DVD, a USB Flash drive. Your USB drive must be a USB2 flash drive, if you choose the USB mode and you will need a Windows ISO.

  See also create an ISO image for Windows - Apple Support installation media Boot Camp .

• Want to format a disk and set up time machine

  Hi all

  I don't currently have access to a MAC, so yo please would undergo some basic questions?

  I have a client with a G-Drive 2 GB with NTFS.   I would like to format it for what is Time Machine friendly and configure for Time Machine.  Could someone point me to the proper indication?

  How to partition and format the disk and what (FS) file system should I use?

  Time Machine RESIDE on every MAC or what I need to download and install it?

  Where the time Machine?  Utility applications?

  Thank you very much

  T

  I see on the web when you plug the thing, get you will invite to time machine.

  1. consider a Mac and then see #5.

  2. see #5.

  3 Time Machine is present on every Mac running 10.5 and newer.

  4 elements of it are in system preferences, then the Applications folder.

  5. Yes, you will be. Time Machine manages the process of formatting before the first backup.

  (142901)

• How to export pictures / albums of iPhotos to external disk and keep the time/date/year and location information changed?

  How to export pictures / albums of iPhotos to external disk and keep the time/date/year and location information changed?

  Menu, file == > export - check boxes to include metadata and location- export to iPhoto

  LN

• Try to install Windows 7 via USB, El Capitan, Macbook Pro 2011 but get this error "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  I am trying to install Windows 7 via USB, (El Capitan, Macbook Pro - early 2011), but this mistake "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  You cannot use a USB on Mac 2011 Installer. Please burn the ISO on a physical DVD Windows (a DVD - R Carbon SL on the rate of burning slower is better) and use it to install Windows. The file Info.plist changes only allowing the creation of USB, but does not fully support a USB Installation.

• Photos can work using just an external HARD disk and leave my only intern?

  Hello

  I am using v1.5 Photos. On my Macbook HARD internal disk fills up very quickly. Fortunately, I have a nice external 1 TB drive and I would like to:

  (1) move all my photos on the external drive and direct Photos program so search the folder on the external HARD drive to find all photos.

  (2) when I import pictures from my camera in the future, that the Mac them automatically in the folder of photos on the external HARD disk and not keep fill the space limited on my Mac small disk internal.

  Is this possible? I remember that I was able to do it with iTunes years when I used a Powermac with 4 x internal HDD of various sizes. iTunes has been able to see the music on each disk files and present them to me as a single list of iTunes.

  I'm not interested in using iCloud at all, I have everything on HARD drive and memory sticks and I am satisfied that, as it provides all the storage I need and I only use a computer for my work.

  Thanks a lot for your help.

  Yes, it is possible to keep the pictures library on an external drive. Make sure that the unit is running at the launch of photos from your Mac.

  See this discussion for detailed instructions of another user.

  How can I move Photos on external hard drive?

• Re: lost recovery disk and partition recovery

  My daughter managed to destroy Vista on her laptop. Problem now is that she can not find the recovery disk and formatted the whole c: drive. Is it possible that she can get the operating system from somewhere, because she still has his serial number... good job, he's stuck at the bottom of the lappy.

  As I see it, you have no more options like:

  1 the order [Recovery disk | https://backupmedia.toshiba.eu/landing.aspx] Toshiba for the money and wait 2 weeks
  2 get Windows copy to install. All the drivers/utilities Toshiba you can download it from [Page Driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]
  If you need assistance in order to install driver, can help you

  The product key that she belongs to original recovery image, that you got with your laptop and it is not a universal key that you can use with each installation of the OS.

  Post edited by: Jeka -?

• Satellite L750D boot issue no boot device - insert boot disk and press key nay

  Hi all!

  I just bought a brand new model of l7501N0 real satellite. I turn it on and "No. bootable device-insert boot disk and press nay button" I tried 3 discs of BONE, nothing. I also connected to the internet, nothing.
  Is is fundamentally flawed?
  Thanks for the replies!

  Please, enter the BIOS settings and set its default value. After this try to restart your laptop.

  The same result again?

• Satellite L300D-222: "insert the boot disk and press any key".

  Hello

  My laptop froze this morning and so I stopped it when restarting it however, I received the message "No boot device - insert boot disk and press any key", what it means?

  I didn't not get discs with the laptop, or have I made the recovery discs. The instruction manual says to press f8 when I restart and go to "menu of advanced start", but it doesn't matter. Where should I go from here, is there a program I can download that would have this disc? All my work on the computer will be lost?

  Thanks in advance for any help!

  Hello

  He looks at the HARD drive died and so the laptop can not boot from the HARD drive but request disk bootable.
  But to be sure, you need to access the BIOS (press F2) and check if the HARD drive is recognized in the BIOS.
  If it s not recognized, then you need a new HARD drive.

  The recovery disc can be ordered here:
  https://backupmedia.Toshiba.EU/landing.aspx

  Good bye

• Satellite 210ct does not start - insert system disk and press a key

  I have a very old laptop and want to move down. It is a 210ct Satellite. When I start upward, he goes and initializes memory and then after about five minutes, to be on that screen it said to insert system disk and press a key...

  It is not the disk hard as I tried it in another laptop and work very well. And then just sitting there.

  I really want to make it work again!

  Thank you

  Hello

  For me the description sounds like the laptop can not find an OS on the HARD disk bootable.
  The laptop trying to boot from the HARD drive and Windows has not been installed on the HARD disk or portable computer booting from the drive, but the environment is not bootable.

  Have you tried to boot from the recovery delivered CD or have you tried to reinstall the operating system?