Sharp AR-M207, impossible to use Sharp or MS driver

I try to install my Sharp AR-M207 on my new laptop Windows 7 x 64 and the impression I have ALL tried.  My printer does not have a network connection, so my current setup is AR-M207 USB to a computer running Windows XP.  The printer is shared then it and works on other Windows XP computers.  The new laptop Windows 7 sees the printer on the network to \\office\printer.  I downloaded the drivers from the Sharp website labeled "Windows 64 bit OS Driver Pack includes: contains: PCL, PS, PPD Drivers Driver for AR-M207.  When I run the installation standard installation resembles a network IP address, but it isn't my setup so I used custom, and then click the option shared.  It then displays a list of local printing to ports.  I created a port to \\office\printer and also tried mapping LPT1 to \\office\printer.  For the printer, I had to choose the 200 as 207 was not expressly.  Setup worked well.  When I hit print I see the Windows XP host computer work and a document of "remoted" appears on the screen of the printer Sharp.  The printer warms up, but prints never.  It turns on and off and intermittently said printing to the screen, but does not print.

I'm tired and then connect via Windows 7 to \\office\printer and he could not find the drivers.  I tried to navigate to extracted the DOWNLOAD Sharp drivers, but apparently they are not to work that way.  I then went through the windows drivers and there was no AR-M207 so I did the update of windows and then the M207 was on the list.  I installed the drivers and got the same result.

I tried to simplify my setup and connected the laptop Windows 7 directly to the M207 by USB.  I ran the high installation and this time I made a custom Setup > shared > and choose USB.  Same results where the printer warms again and again and never prints.  I've tired Windows drivers for this printer via USB and had the same results.  I am at a total loss.  Should which driver I use for Windows 7 x 64 as the drivers supplied by Sharp do not work for a local USB connection or not the driver that Microsoft provides for this printer.

I tried to contact Sharp, but they referred me to an "authorized reseller".

I'm done by downloading the driver SPCL for Windows 7 x 64 and try this.  Same result when I try to connect via the USB port.  He installed a printer with itself after it and then a second with PCL after him. , neither worked even if installation seems to work very well.

Then I tried to connect via the shared printer connection.  This time he did not ask a driver selection and I just installed automatically.  I am able to print via the shared network connection.

Good enough.

Tags: Windows

Similar Questions

  • Impossible to use the box of favorites - a pop up appears saying unavailable location

    original title: IMPOSSIBLE to USE THE FAVORITES BOX-APOP-UP to POSTER SAYING LOCATION NOT AVAILABLE

    Whenever I try to use the box of Favorites (top-right), I can use the tabs 'RSS' and 'History', but not the "Favorites". Instead, I get a message saying: 'not available place '. Can someone out there help, please.

    Edward Baker

    Hello

    I suggest try to reset Internet Explorer and check to see if it helps:

    http://Windows.Microsoft.com/en-us/Windows-Vista/reset-Internet-Explorer-7-settings

    It will be useful.

  • No CONTENT ADOBE PHOTOSHOP usage like this program until they make impossible to use their more recent programs on Mac or Windows!

    Not HAPPY WITH PHOTOSHOP use to love this software until they have done it is impossible to use with the newer Windows & Mac

    I have 12 items, 7 PS, 6 PS and PS 4.0 (which would always be my first choice), but most are useless, why can't they be used with the new Windows or Mac?

    I am very disappointed by this company and would "Never" sugest someone uses as his then we face, Ive given my Adobe software because I wasn't able to use it on my Mac, which is hundreds of dollars WASTED!  I pick up an another 4.0 'if' it was compatible with anything used today but its looking more like Adobe has become consumed with greed and not customer satisfaction!  It seems to be a loyal to the company's product is a thing of the PAST 'Thank YOU' but 'no. THANKS ADOBE SMH.

    No one forced to use a Mac that is not compatible with the old software... the problem is written Mac to new operating systems that will not old programs to run

    Windows did the same thing... I had to give up a Microsoft Office 97 perfectly fine when I moved from WinXP to Win7

    If you want to use the old software, you must use an old operating system

  • I just put cc2014 photoshop and illustrator on my new lenovo yoga 2 pro, illustrator is great, all the menus are big enough to use but in photoshop, everything is so small its almost impossible to use. can someone tell me if a fix for who or why his

    I just put cc2014 photoshop and illustrator on my new lenovo yoga 2 pro, illustrator is great, all the menus are big enough to use but in photoshop, everything is so small its almost impossible to use. can someone tell me if a fix for who or why its doing just in photoshop

    Go to the Photoshop preferences > experimental features > scale IU 200%

    I don't know if has Illustrator of the same function, but you can view this forum.

    Note: If this answers your question, please mark as answer.

  • Impossible to use

    Adobe community help app is so slow that it is impossible to use.

    Just in case you didn't know.

    Hi Leshes: the engineering support team just released a new version, 3.3, which is described here: http://forums.adobe.com/thread/707280.  Great emphasis on this last version has been performance - in fact, for research on the Flex and Flash (which have the extra ASLR and code search results), the results are now returned 250% faster.

    In addition, AIR2/Flex 4 migration should improve responsiveness overall app.  Hope you give an another shot if you are ready...

    Post edited by: Mark Nichoson; fixed the URL to the right forum thread.

  • Is it necessary to use separate external hard drive or external hard drive new or freshly formatted for backup time machine.

    Is it necessary to use separate external hard drive or external hard drive new or freshly formatted for backup time machine.

    Both fresh and freshly, can use as a Time Machine backup HARD drive, although I personally prefer to use newly formatted disk.

  • You can use an external hard drive with the Mac Mini?

    I've seen videos that say that we cannot increase the ram on a min of Mac, but I'm curious if this works like an ordinary computer, if we can attach an external hard drive to store some of the memory to free up space. Sorry if this is something stupid just need to know what I can do with it.

    You can use an external hard drive to boot and run with any Mac. Its not going to improve or replace your ram. If you use a mechanical hard drive in any Mac then help and boot from an external drive, especially if it's a SSD will be significantly faster.

  • Installtion of recovery using the external DVD drive

    Hello

    I have a satellite A50 and try to use the recovery disk using a USB DVD drive (internal is damaged), is it possible? and how?

    Thank you

    Hello

    It is possible, but you need an extended drive Toshiba compatible and taken in charge.
    I would recommend asking the service partner for readers supported and ordering of the ASP him. He has information on the supported devices and you'll be sure you get a car 100% taken in charge.

  • Can I use an external hard drive for my photos screensaver?

    Is it possible to use my external hard drive as the source of the photos of the screen saver?

    I'm running El Capitan 10.11.3 and have a Seagate BUP Slim.

    isabelfromsutton

    Just to clarify, this means the iPhoto somehow? Then, in a version?

  • His delay in using the DVD/CD drive on Satellite a series

    I don't watch DVD on my laptop for often, but when I do, it lags behind.
    It looks like its be delayed for half a second.

    It is somewhat a his jerky aswell.
    When I play CD on iTunes, the sound is delayed as when I play the DVD but if I import them, they sound great.

    Any help?

    Also, if you post something for me to do.
    You will post how to do cause I have no idea! : P

    Hmm according your description any audio CD or DVD lag by using the CD/DVD drive

    I think I know what problem might be;
    Choose:
    -Primary IDE channel-> properties > Device Manager-> Advanced settings

    Please check if DMA if available option has been chosen.

  • Should what format I use for my external drive for time machine?  I have a WD 2 TB that is formatted for PC new drive.

    Should what format I use for my external drive for time machine?  I have a WD 2 TB that is formatted for PC new drive.  When I got to disk utilities to erase, and then reformat the options are

    1 mac OS extended (journaled)

    2 mac OS extended (journaled, encrypted)

    3 mac OS Extended (respect for case-sensitive, journaled)

    4 mac OS extended (case-sensitive, journaled, encrypted)

    See the information below If you can not back up or restore your Mac with the help of Time Machine - Apple Support

    When you select a drive to use with Time Machine, your Mac automatically prompts you if you need to reformat the drive.

    • If you are using an external drive connected to your Mac, use disk utility to make sure that your backup disk is formatted in HFS + extended (journaled) and is the partition type GUID Partition Table (GPT).
    • If you use a time Capsule, formatting the drive for Time Machine preferences automatically formats the drive as HFS + Extended (respect for case-sensitive, journaled) with a GUID Partition Table (GPT).
  • How to use the second HARD drive of Satellite A210 - BP1 for mirroring

    Satellite A210-BP1 came with 2 HDD (160 GB).
    Now, I want to use the second hard drive mirrored the first, one that has Vista installed.
    This should be done without supervision and in real time - as a RAID 1.

    How can I do this?
    I also have Vista professional available and I would be willing to use 3rd party software as well.

    Thanks in advance for your answers.

    Hi Jan

    I doubt that this is possible
    Why? The point is that you need to use two hard drives in mirroring, RAID striping, mode etc technology
    Satellite A210 can't RAID. It s only a SATA controller without RAID capacity!

    Therefore, the final answer is; NO, it is not possible to use mirroring

    Concerning

  • I already have one zero drive for FCP 7 projects implemented.  I would use the same scratch drive for FCP 10.  Is there a special way of implementation is seamless?

    Said to implement the scratch disc so I can use the same hard drive for FCP 7 and 10 projects - something on a folder separated for 10 projects.  What are the steps to do t his?

    More details would be useful. You have already imported media in FCP7? Or you are just starting to work with both applications at the same time? What application you plan to use to ingest media? Don't try to use them both for ingest.  You can set FCPX to use the FCP7 Capture Scratch location for your support and then let the media imported in place. You can also assign a location for media to import using FCPX and then use this location for FCP7, again leaving the media in place.

    Or I totally misunderstood and you only talking about using the same drive, which is not a problem at all.

  • HP Pavilion dv7 - 3188cl: can I use an external hard drive with my laptop computer?

    Hello

    Can I use an external hard drive from 1 to 2 to my laptop? Any help is greatly appreciated. Thanks in advance.

    Hi @ptr1959w!

    Yes, you can use an external hard drive on your laptop - just connect via one of the USB ports on your machine, partition and format it in disk management, and you should be ready to go. Here is an article with the steps you can follow to do this:

    http://products.wdc.com/support/kb.ashx?ID=ou7o9Q

    Hope this helps, and feel free to ask any questions you may have.

    See you soon!

  • I'll be able to use the external dvd drive on microsoft surface?

    I like really the surface so far and I was wondering if I'll be able to use an external dvd drive on the surface because there only 1 usb port.

    Yes.

    You can attach an external USB hub or port replicator and connect USB devices to one. And, if connected to the network, you can use the DVD player on any other computer network with any active permissinns and sharing.

    http://www.StorageReview.com/samsung_intros_wireless_optical_drive_and_portable_bluray_writer

    In addition, there are at least a DVD player wireless.

    Tom Ferguson

Maybe you are looking for