"Shortcut" in the Weblogic console.

Similar Questions

• WebLogic Instrumentation field to start the Weblogic Console

  Hi people,

  I have a question on the instrument WebLogic domain with two groups on two servers that the application servers are instrumented when they are started from the Weblogic console (I'm not terribly familiar with Weblogic so go easy on me)

  The manual is 'almost' clear for stand-alone Weblogic Server instrumentation or using Weblogic node Manager, but does not mention anything on Weblogic instrumentation so that instrumentation is picked up when the Console is used for stop/start server

  The environment includes:

  -A server for the executed on server1 and started Weblogic domain administrator but this script:

  /bin/startWebLogic.sh

  -NodeManagers two, one on each server1 and server2, started by these scripts on each server:

  /bin/startNodeManager.sh

  -Also has two startup scripts Weblogic server on each server:

  /bin/startManagedWebLogic.sh

  /bin/start_server1.sh

  So far we've instrumented the /bin/startManagedWebLogic.sh with:
  

  QUEST_DEPLOYMENT_DIRECTORY = / foglight/Quest_Software/Foglight_Agent_Manager/agents/JavaEE
  If [f ' $QUEST_DEPLOYMENT_DIRECTORY/integrate.sh ']
  then
  QUEST_JAVA_ENV_OPTS = WEBLOGIC:SERVER
  . "$QUEST_DEPLOYMENT_DIRECTORY/integrate.sh".
  on the other
  echo agent Java EE not activated
  FI

  and instrumented the /bin/startNodeManager.sh with:

  QUEST_DEPLOYMENT_DIRECTORY = / foglight/Quest_Software/Foglight_Agent_Manager/agents/JavaEE
  If [f ' $QUEST_DEPLOYMENT_DIRECTORY/integrate.sh ']
  then
  QUEST_JAVA_ENV_OPTS = WEBLOGIC:NODEAGENT
  . "$QUEST_DEPLOYMENT_DIRECTORY/integrate.sh".
  on the other
  echo agent Java EE not activated
  FI

  This set works fine as long as the node and the server are started from the command line but it not instrument anything if they are handed over to walk through the Weblogic Console

  Issues related to the:

  -the scripts above (or all) of which have to be modified (and how) so that Weblogic Server starts instrumented to start the Console

  -what I'm missing? everything that needs to be done so that the Console is restarted with start the instrumented servers?

  Thank you

  Ovi,

  When you're setting switch servers using the console are not be started by the Manager of nodes? If they are, the instrumentation on Node Manager should do the trick. If they are NOT started using the node Manager then how they get the JVM settings?

  I saw the case in which settings for the boot server were not going through the Manager of knots, they were taken in the FMV of the options in the welogic server administration console. If you can find this place (pretty good the region where you set your memroy settins), you can manually add the flags that get the agent running.  You can see the parameters when you start weblogic from script, Xbootclasspath-... - javaagent..., you can just copy paste these lines and hardcode them into the admin console with settings java (jvm) for these servers.

  It will be useful.

  Golan

• Newbie - how to check the deployment descriptor in the Weblogic console?

  Hello
  I deploy an application developed with JDEV 11 g, deployed to the file. WAR in JDEV, deploy the WAR file to the weblogic.
  When I test it in the weblogic console, I deployed it and active, I'm going to test and the test Point of the URL is in the form
  
  http://10.10.74.20:7003 / simple_jsp-Project1-context-root /.
  
  that gives me, I get a 404 error.
  
  Where can I check the deployment descriptor in the console of all the other things I need to check?
  
  Thank you
  
  Anatoliy

  Hello

  AFTER WLS8.1 version AdminConsole does not provide the functionality to display the deployment descriptors in XML format inside the console...

  In your * "WEB-INF/web.xml" * file please add the following line: in the below please enter your own file name

  
  index.jsp
  

  To change the root of context in WEB-INF/weblogic.xml next entry is necessary:

  
  
  YourContextRoot
  
  .
  .
  .
  Thank you
  Jay SenSharma
  http://jaysensharma.WordPress.com (WebLogic wonders are here)

• The WebLogic Console error

  I entered my username and password to the weblogic Server console
  but then after
  I got the following messages and I can't open the weblogic console.
  
  
  Impossible to /framework/skeletons/wlsconsole/window.jsp
  Impossible to /framework/skeletons/wlsconsole/titlebar.jsp
  
  Did someone solved this problem? Can you please help me on the solutions.

  Hello

  In the file script/setdomainenv to start inside the field/bin, you can check the JAVA_HOME if its properly set up to C:\bea103\jdk160_05\bin

  If this isn't the case, please chenge there and then restart the server.

• Is it possible to start the server managed through the weblogic console

  Is it possible to start the Manager of servers such as soa_server1 and oim_server1 of weblogic console? Please I need your help

  http://docs.Oracle.com/CD/E23943_01/apirefs.1111/e13952/TaskHelp/startstop/StartManagedServersFromTheAdministrationConsole.html
  http://onlineappsdba.com/index.php/2010/04/10/WebLogic-error-starting-managed-server-from-console-node-manager-associated-with-this-machine-is-not-reachable/

  -nayan

• change of domain name in the weblogic console

  Hi all

  I created a new field in weblogic for deployment of ADF now when I open consolem, I see domain.how console prior to change that.

  How can I see the new ADF_domain I created and the server on the console.

  I created a new area and used a different port.it worked well...

• Check WebLogic Console output in the log files

  Hello

  I want to save my messages of the weblogic console and SOP of printing in a log file to analyze the results and the exception. For example, suppose I have a booth along the JVM field on which a WAR or EAR file deployed. The output of the print statements and thrown exceptions appear on the console of the black JAVA virtual machine but I want them saved to history and the track. WebLogic Server connects to them and put somewhere or we need to do it manually? If yes then what is the way to do it?

  Concerning

  -Magwaa

  Hi Magwaa,

  Take a look at this blog post explaining how to redirect the output to the console: Blog of Fusion: Weblogic: Console Redirection of log file output

• Not able to see the cards of weblogic console

  Hello
  
  I installed weblogic 10.3.3 and soa 11.1.1.3 as well as the base XE and RCU 11.1.1.3 data. In the weblogic console, I am able to see DbAdapter and AqAdapter, not Abel to see the remaining cards like FileAdapter, FtpAdapter, OracleAppsAdapter. Can someone help me...
  
  Thanks in advance...
  
  Published by: 847859 on April 25, 2011 03:49

  These are the resource adapters that must be installed:

  FileAdapter
  DbAdapter
  JmsAdapter
  AqAdapter
  FtpAdapter
  SocketAdapter
  MQSeriesAdapter
  OracleAppsAdapter
  OracleBamAdapter

  you don't see anything strange about them in the newspapers?

  In the file config.xml against your domain, you should have something like this:

  
  OracleBamAdapter
  AdminServer
  RAR
  C:/Oracle2/middleware/Oracle_SOA1/SOA/connectors/OracleBamAdapter.rar
  329
  DDOnly
  nostage
  

  It aims at something?

• How can I disable the damned shortcuts to the web developer? E.g. reopen a page Ctrl + Shift + T now opens the console, do not have the basic FF command... Terrible.

  The shortcuts are the same - tools for web developers are now open for CTRL + SHIFT + T rather than reopen a closed tab, etc... It is very annoying.

  I can't delete web developer, but I never wanted to install it.

  Subject: config does not work, or reinstall Firefox...

  Is there one solution other then moving to Chrome?

  Hello!

  I know this is an old post, but I found the solution to your problem.
  I had the same problem but with adblock plus (extension of masking element).

  It uses the same combination of keys ctrl, shift + k and when was rush to the web developer of this combination has opened...

  To DISABLE this shortcut, you must OPEN the console of the web developer and click on the gear which is located in the left side.
  Then, UNCHECK the box that says Console and press the X on the far right close the console.

  Disable your Add on and turn it on again and you'll be fine.
  (or restart Firefox)

  In my case it worked well and instead of "null" in the key of the element AdBlockPlus combination hide now, he says the corresponding key and no longer opens the "web developer console.

  I hope it helps

  (if you want I can provide before/after screenshots to see)

  Thank you

  Dimitris

• Cannot access the weblogic Server console.

  Hello

  In my windows server 2012 I created the virtual machine using the Hyper-V Manager.

  In this virtual machine, I installed the weblogic Server 10.3.6. The ip address of the virtual machine is 192.168.1.9.

  In my virtual machine using localhost I can able to access the console. But when I try to access the console to another computer that has windows 7, cannot able to access the console.

  Check if the AdminServer is listening on all addresses to link or not?

  Can you try to set an IP address to your AdminServer as following in your "$DOMAIN_HOME/config/config.xml", and then try again

  
      AdminServer
      
        false
      
      7001
      true
      192.168.1.9   
  

  Still, if you face any problem, then it might be a firewall problem.

  Please, try the following on the remote computer to see if the port is accessible from the other box or not:

  From your windows 7 computer customer trying to see if this port is available or not on this IP address

  telnet  192.168.1.9   7001
  

  Also several times the IPv6 configuration can cause this problem, where can you try to start your WebLogic using the following JVM option:

  -Djava.net.preferIPv4Stack=true
  

• access to the weblogic Server console problem

  Hi all

  We have a problem of access to the weblogic Server console page.

  We have fresh installed the Enterprise Manager Cloud control 12 c and we can access the MS pages without problems.

  When trying to connect to the weblogic Server (https:// < our_server >: 7101/console) with Firefox, IE11 or if the page is loading and loading without showing the login page.

  But when trying to connect to this address with a place (elinks) browser on the unix machine we'll see the first page immediately.

  Any ideas?

  Thank you

  Michael

  Hi all

  We solved the problem in another way: we opened the ports http access.

  Because issues were security settings in Internet Explorer.

  Thank you

  Michael

• Run 2 Weblogic domains from the same console

  Hello
  
  I have a question.
  
  Currently now I have 2 domains, each domain has been installed with the management server and managed servers.
  I have 1 nodemanager.
  
  During the installation of the areas I had to provide different ports for weblogic instances, so I have 2 different consoles to access the WL to manage the domains.
  
  The question:
  Is there a handy way and admin 2 different domains (which runs on the same machine) from the same console WL?
  
  
  Thank you

  We do not have a way to administer both weblogic from the same console.

  But I think you can install Oracle Enterprise Manager to manage your middleware infrastructure.

• By default the administrator username and password for the Weblogic Server administration Console

  I have created a new domain Wizard configuration under windows (with config.cmd).
  When you set up the field, I don't check boxes to configure the server administration, server management, cluster...
  Just give the domain name and the location of the home field and clicked on create the domain.
  So automatically AdminServer is created and domain was created successfully.
  Once the domain is created, I started with the administrator of the server with the same configuration Wizard and clicked on fact.
  
  Now, the administrator of the server is started successfully. But I don't know the username Admin and the password I didn't configure it when creating the domain.
  
  So how to connect to the administration Console? What will be the default username Admin and password for you connect to the Management Console?

  The Assistant of the STANDARD Config does not have a default password, you must set when you create the domain. It is one of the steps in the config wizard...

  Published by: EramusBlack on April 26, 2012 16:50

• Get strange errors 'real time' in the browser console, what do mean?

  I noticed recently that since yesterday is the day prior to that, I get a strange 'real-time' error messages in my browser console log. I get them for more or less the same sites, and I have attached a screenshot of some of the most common mistakes for example. I see these errors very frequently in the browser console log.

  So I'm a little worried about what mean these errors, why I want to come and if anything, what to do about them.

  Hello

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• Keyboard shortcuts for the buttons works irregularly - why?

  When you use the access key for the button attributes, they work sometimes and not others. Three behaviors are observed:

  -use the accesskey times moves the focus and click on the button (correct behavior)

  -use the access key moves the focus only - do not by clicking on the button

  -use the accesskey does nothing

  These problems occur without change installation, restart, etc..

  What could cause this?

  Moreover, 3.6.28 works very well with the exact same web application.

  It might be useful to have a small script for conducting a census of the keyboard shortcuts page. You can open the web console (Ctrl + Shift + k), paste the following options next to the circumflex accent ("' >" ") and press ENTER. A new element is added at the end of the body with the results.

  var aks=document.querySelectorAll("a[accesskey], button[accesskey], input[accesskey]"); var out=document.createElement("pre"); for(var i=0; i<aks.length; i++) out.appendChild(document.createTextNode("Tag:'"+aks[i].nodeName+"'; id:'"+aks[i].id+"'; name:'"+aks[i].name+"'; key:'"+aks[i].getAttribute("accesskey")+"'\n")); document.body.appendChild(out);