should be deleted 'semicolon' that occurs at the end

Similar Questions

• When I open a link irc with a string name that contains "~" at the end, firefox (14.0.1) opens the same channel name but with "7%" instead of "~" at the end

  When I open a link irc with a string name that contains "~" at the end, firefox (14.0.1) opens the same channel name but with "7%" instead of "~" at the end
  http://img835.imageshack.us/img835/2856/clipboard05nq.jpg

  I can't open the image, but I can say something in general about the tilde.
  
  The tilde "~" is an unreserved character and that's why it can be replaced by its form encoded percentage '% 7' inside a URI without changing the meaning. See
  
  http://en.Wikipedia.org/wiki/percent-encoding
  
  According to article 2.3 of RFC3986 we should prefer the encrypted form so this behavior seems to be somewhat outdated.

• HP Officejet 6700 Premium: HP Officejet 6700 Premium No. no power no answer, unless that stood on the end

  So I have a HP Officejet 6700 Premium which was working fine and suddenly stopped working. The power module is fine, green light turns on, well verified. I tried all the inane suggestions on the HP support site so I know the plug works, feeds the power supply module, but the printer power button is unresponsive. Opening the door or lid elicits no response. Totally D.O.A.; That is until I can't stand the printer on the end (discovered this while preparing to throw it across the room). If I am standing at the printer at its end it sometimes suddenly turns on and starts his routine of self-control (too long).

  Everyone knows this issue or know a solution? The printer is out of warranty and when I called HP support they told me to throw it away and buy another. Clearly, it seems that something is just loose in the field of food, because when it is vertical, it seems fine. I don't mind to pay to have it fixed, but the support rep seemed indifferent in the repair of the printer option.

  Hi @Alpha_Beta,

  Welcome to the Forums of HP Support! I see that you are facing some hardware issues on your HP Officejet 6700 Premium. It does not, until he is on his side. You have contacted the technical support and the printer is out of warranty.

  Try to perform a hard reset:

  1. disconnect all cables and cards of memory in the printer. Unplug the power cord, directly from the back of the printer when the printer is still on.

  2. unplug the other end of the power cord.

  3. If there is a power supply on the power cord, disconnect one end and reconnect it.

  4. at the end of 60 seconds, plug it directly into a wall outlet (not a surge protector or battery backup because they can cause the printer to lose over time basic functionality).

  5. connect the power cord to the back of the printer.

  6. the printer should automatically power back upward. If not, turn it on with the power button.

  7. try to make a photocopy (if your printer is a printer all in one) before you connect the cables from the printer.

  8. connect the other cables needed to the printer.

  It work? If you are still unable to use the printer as it is more under warranty I would contact them and look at all your options as it is not a repairable part. As you say electric sounds, something inside.

  I hope this helps.

  Thank you for being a part of the community of HP. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

• When I try to do a time lapse in lightroom, that it cut the end of the video

  In Lightroom 5, (it came with Photoshop Creative cloud), I download a series of pictures, edit them together, then select slide show and a model Bowers - model of the user - Time lapse 23.97fps, download, .zip https://www.youtube.com/redirect?q=http%3A%2F%2Flightroom-blog.com%2Fpresets%2Flrtimelapse & redir_token = U79NuJdMuv4axu4RigPjzH5hxpd8MTQxNzI1NjExM0AxNDE3MTY5NzEz

  I then export the video, she treats as usual. BUT when I look at this return is missing at the end of the clip. I am a student level and that I should use for my course, please help.

  Alex O'Sullivan

  So to be safe, you know what I mean, take your Lightroom changes. Export to a folder of numbered sRGB in sequence of JPEGs of reasonable size (say 3840 pixels on the long side, so you can make a 4K video) and implemented the project as in the linked video in front. You can now make a simple time-lapse direct or throw in a pan and zoom in the editing Photoshop Panel, add a title caption, bland, etc. Here is an example of a Time lapse I created in this way: Jao photo blog: The Polar Vortex - Star Wings

• How can I get rid of the vertical purple bar that appears at the end, when I use a default transition (cross dissolve) or dip to black?

  Is there a vertical purple bar that appears only when I melted at the end. I'm trying to remedy this situation. Help, please. Thank you!

  Lila

  It is the first Adobe to tell you that you are at the end of the sequence. If hate you as much as we all send a feature request to delete. The bar won't be there on any exported file.

• How can I stop: 1) scrolling ads/info that remains on the page, even while I scroll down to the bottom. (2) new side tabs that appear at the end of the articles to tease the next articles?

  I have two questions. In the past months, some sites there are ads or facebook/twitter links that scroll and remain on the same page that I scroll down. I find distracting moving images and want to stop them. How? I saw another development that I get close to the end of an article, two tabs appear on the left and right of the screen who tease article previous and next. These tabs appear often on the top of the text of the article I'm currently reading, making it difficult to finish the current article. How to stop these tabs?

  for 1)
  Try using an extension "ad block", as a first step.
  Click on > > AMO search for "ad block"

  I use this one - https://addons.mozilla.org/en-US/firefox/addon/ublock-origin/

  for 2)
  You can try to use this extension - https://addons.mozilla.org/en-US/firefox/addon/umatrix/ - too complicated for me, I rarely see these stupid teases 'previous' and 'next' and my screen is wide enough so that they do not cover any text I read.

• How can I get foxfire after that is at the end of my icons down?

  I've always had icon foxfire at the end of my bottom of my screen. For some reason, he disappeared. Can you help me?
  Thank you, Doug

  -What is the icon in the Windows taskbar?

  Make sure that you run not Firefox mode full screen (press F11 or Fn + F11 to toggle; Mac: Ctrl + Shift + F).

• Errors that occur during the iTunes Installation

  Product name: iTunes

  Processor speed: 1.50 GHz

  RAM: 4.00 GB

  Operating system: 10 64-Bit Windows Home

  After leaving my laptop sit idle for a few days, I tried to open iTunes last week, and an error resulting in a ToolTip telling me that a file has been moved, deleted, or damaged. The error message was "error 0x000012f".  I uninstalled iTunes and tried to reinstall to fix the problem, but it does not, because I now have problems with installation of iTunes. Can someone help me?

  

  Try to repair the Apple Software Update of the programs and features Control Panel, and then reinstall iTunes.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Several problems that occur simultaneously; the affected objects are .swf, rollover image and formMail

  I am very close to finishing my site, but a few days ago, I ran into a few problems. Things that have been working perfectly, has stopped working. These are:

  -l' in the file flash heremouseover effect. As you can see, the file plays fine, but when I move the cursor, nothing happens. The file is suppused to scroll with the movement of the cursor. In addition, each image is a link, but when you click it, nothing happens. The same problem happened to the swf file used on other parts of the page, the links stoler, edge, oppbevaring and diverse.

  - The link image of tread on the right side of this page. It is the green square object with the word "bestill' crushed it. The link to the image worked, until the computr ogre killed my page. Now, nothing happens when you hover the cursor, and the link does not work. I tried to delete and create a new, but it does not help. (There is also another file flash on this page, does not work currently, but I think that this problem is not related to the one described in this post on the forum, so please ignore)

  -The form on this page. Yet it worked once, and send forms to my email. Now, it is not yet possible to write in the form.

  I tried to understand what I have done to cause these problems. The biggest change that I've done is move the contents of each page in a model, so that only the 'content' div class is editable. But then again, it might be something else causing the problems. I don't even know if they are related, even if the problems occurred (or discovered) at the same time.

  I hope someone is able to help me.

  Thank you

  Siri

  Too many problems for a post.

  That's why I looked at just one aspect, namely the Contact form. I hope that what follows will also grind the rest of the problems.

  Add/Edit the following

  . Happy {}

  float: none;

  }

  GRAMPS

• "Secure connection failed" that occur on the growth of number of sites, v40.0.2

  I'm on a Mac network and many of us become "secure connection failed: the page you are you are trying to view are not visible because the authenticity of the received data could not be verified." This number of sites displaying this error increases. It was just Wikipedia.org at the beginning, but now I can't access Mozilla.org! I have tried virtually all solutions that have worked for others, without success, including:

  -Uninstall of Firefox and install the 40.0.2 version

  -setting 'security.tls.version.fallback - limit' 0 or 1

  -setting in "security.tls.version.max" to 0 or 1

  -disable the 'security.ssl3.dhe_rsa_aes_128_sha' and 'security.ssl3.dhe_rsa_aes_256_sha '.

  -Uninstall and creating a profile

  -Check without plugins or add-ons are causing the problem

  -Refreshing Firefox

  And probably others I don't remember. I wish I could put more details browser, but can't because I can't get on Mozilla with Firefox. Please help and thank you very much!

  Which site gives you inappropriate alert rescue - the main www (https://www.mozilla.org/) or this support site? Or is this only a problem when you use a partial domain that redirects, such as https://mozilla.org/?

  Both this site and the www site use TLS 1.2, so Firefox does not need to return to TLS 1.0 in both cases. In addition, Firefox should have no problems connecting to Wikipedia.

  It seems that you do not have a direct connection, there is a proxy server or something else between you and the site or malware.

  If it's common throughout your network, it might be a common agent or something wrong with the router/firewall.

• that occurred during the processing of this queue by creating problems (like to ignore these events)

  I think maybe I need to change my design and use more screens, but here's what I'm doing now and 2 challenges that he created.

  App starts - runs from the main screen - throw a box with instructions

  Trackball that I capture and trigger is clicked:

  (1) remove the case of the statement

  (2) display a countdown timer label field

  (3) start a timer to decrement the field job

  (4) audio recording start

  So we are always on our main screen, with just a timer showing at this stage

  Trackball is clicked when recording is finished:

  (5) app starts a job of decoding and analysis of your time

  What is happening on the user interface thread and I really don't want the user to be able to do something this afternoon

  Until the scan is finished the user starts hitting the keys... MENU, track ball, followed by the clicks of ball movements, enter etc.

  6) now that the analysis app is ready to draw a graph of the results, but start first transformation of these user actions and they could have carried off a menu and even blow close without realizing so the app could close

  In addition to potential problems of user interface events waiting, there is another major problem...

  * If a MENU is open - even empty - once the scan is complete the chart is not updated and my bitmap is empty.  I create an object to a bitmap and graphics, I use DrawLines to create a chart.  This code works great except the chart ends up empty if this menu is when he tried to view the chart.

  There are many potential problems here and not enough details for you guys to give the actual specific patches.  I tried ignoring the clicks in the analysis period and also to set the menu to be empty during the analysis period, and I even tried to close the menu after the analysis period by using the menu I have more drive with menu making.

  I guess the crux of the problem is all those waiting in line for the actions of the user... If there is a kind of pop events so you can ignore them that would probably be the best course of action for me.  Any suggestions?  or should I look to push another screen to display a message of 'treatment' in the audio analysis (I'm not sure it will solve the problem).

  Thanks in advance,
  Craig York

  I understand how to synchronize with the user interface thread, but slows the working thread already slow waiting for a lock is probably not a good idea.  Thanks if.

• Why did - it still deleted emails that appear in the box on the reopening of Thunderbird?

  Every day, I check my emails and delete the ones I don't want. A red X appears with the message, but when I open it again later in the day Thunderbird is always be listed. Then, quite unpredictable, deleted emails will disappear the launch next Thunderbird.

  You must have set your account * brand * deleted messages (called the model "mark as deleted") and write them off when thunderbird stops. Maybe your server is not really delete these messages until the next day

• If the synchronization from a laptop computer with its own set of bookmarks, that occurred in the original portable bookmarks? Also, are they saved?

  I'm afraid to lose a set, different bookmarks on a laptop during the synchronization of your desktop set. How Firefox handles Favorites the?

  Techguy, you are right. The design principle is that you want to have your Firefox in sync... all this.

  In case you also describe, all L - O of bookmarks would appear duplicated after that second machine is associated. As soon as you remove them a machine that they will disappear from it too.

  I hope that makes sense.

• Should I delete iPhotos when I get the Photos app?

  I have Photos and iPhoto on my iMac. I am satisfied with the Photos app. Can I just move the iPhoto application to the trash?  What happens to my library of photos, movies etc. ?

  You can, but it is not recommended

  The iPhoto application takes up very little space and is very difficult (if not impossible) to recover if you want or you need

  And delete the iPhoto library will recover very little space- Photos saves disk space to share images with your iPhoto or Aperture - Apple Support libraries

  LN

• Here are the details of the error that occurred during the installation of nero 8.

  Details Product: Windows operating system ID: 1000 Source: Application error Version: 5.2 Symbolic name: ER_USERCRASH_LOG Message: Failed module %3 failed application %1, version 2%, 4% version, address failure 0 x %5.

  Please help me on the following error message, I tried to install nero 8 on my pc at home, but he could not install. I use nero oem disc 8.

  Hello chanderkant,

  Where did you get the disc for Nero 8 OEM? Is it preinstalled on a computer on which store your purchased in a retail store?
  If so, it may be that the OEM software works only with the preinstalled computer where it was originally installed. It depends on the license to the
  the computer manufacturer.
  You can contact your computer manufacturer and ask questions about the Nero 8 disc.

  Or you can post in a community forum, if the OEM has one.

  I hope this helps.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think