HP 27xi: schematics for HP 27xi monitor

Similar Questions

• HP Pavilion 27xi monitor: monitor HP Pavilion 27xi: Mac Mini running Yosmite display problem

  
  

  Hello @adsben,

  I understand that the image quality for your HP monitor is poor when connected to your Mac Mini, and I'd be happy to help you in this case!

  According to this document on the use of Monitors HP on a Mac:

  "The HP monitors are not supported in a Mac environment. However, recent Macs use graphics with VESA modes and can display most of the HP LCD monitors. To do this, connect the monitor to the Mac, while the Mac is turned off and then turn on Mac. The monitor must operate at 60 Hz. The INF and software for the HP monitor are for Microsoft Windows and cannot be run in a standard MAC OS environment. »

  I hope this helps!

  Best regards

• How to make a menu fit for salvation policies monitors resolution is larger and readable?

  How to make a menu fit for salvation policies monitors resolution is larger and readable?

  My UI elements appear tiny. | Error postal codes of Mylenium

  Mylenium

• Connection Mac Book Pro for 2 external monitors

  Hello

  I need help around to confirm if it is possible to connect 2 external monitors to a Mac Book Pro. I currently have a Targus docking station and it works for my work which is a lenovo but does not work for the Mac Book laptop. I bought the book of Mac in 2010, does not have a thunderbolt connection, but has a mini display port connection. The external monitors I have Samsung LU28E590DS/XY - 28 "UHD monitor with at least 2 x HDMI and 1 x Display port connections. Need to display a set up as main and the other scope.

  exactly, including more than 50 computers called MacBook Pro are you using? The more accurate description is by designation of MacBook Pro 6.2.

  What version of OS are you running?

  What model Targus Docking station? Which interface is used for this Targus Docking Station? What guarantee do you have with the seller that it works without problem on your Mac?

• Recommendations for the second monitor (27 in.)

  Hi - We are through to PC iMac27 some of our offices.  Currently, most of our Dell ups have double monitors because we usually inventory or manufacturing software open on one monitor and email on another.  Or their variants.

  I noticed he had discussions in the past, but nothing too recent, and I guess that this kind of things always evolving.  Google searches to discuss some, but:

  can anyone suggest a decent price monitor (under $ 400) that I can match up with the iMac 27 "?

  I am particularly looking for those who have white or brushed aluminium chassis - or at least a 'mac' look like.

  Mac Thunderbolt screens seem great, but $ 1,000 each, they are off-budget.

  Thanks for the suggestions!

  Jaco_Crash wrote:

  .....

  Mac Thunderbolt screens seem great, but $ 1,000 each, they are off-budget.

  .....

  They are also be abandoned once the current stock is depleted.

  Much will depend on the resolution and the size of the screen, but there is none

  specific "Mac-like" monitors.  The best is to check which providers

  propose and see what is acceptable to you.

• Get the serial numbers for the HP monitor?

  Hello

  I need to get the serial number & s 100 HP monitor model numbers to estimate the warranty end dates. Of course, also for our future inventory internal

  I think that's not possibe with HPDM as a device of Numebers series TC traction.  Is it possible/script to get the serial number of the monitor. ???

  Thank you

  DIN

  Finally, I have a script to get the serial numbers of the monitor.  Rename the attachment to info.vbs
  
  OUTPUT
  
  C:\ > cscript/nologo monitor_info.vbs
  Computer name not found, using the local system.
  Serial number: MXL9040HWP
  Maximum capacity: 4194304
  Maximum capacity: 4096
  Reference number:
  Serial number: MXL9040HWP
  Inventory number: MXL9040HWP
  
  Monitor has)
  .......... Manufacturer ID = HWP VESA
  .......... Device ID = 264 b
  .......... Manufacturing date = 9/2006
  .......... Serial number = CNK6380R6C
  .......... Name of the model = HP L1755
  .......... EDID Version = 1.3
  Monitor B)
  .......... Manufacturer ID = HWP VESA
  .......... Device ID = 264 b
  .......... Manufacturing date = 9/2006
  .......... Serial number = CNK6380R6C
  .......... Name of the model = HP L1755
  .......... EDID Version = 1.3
  Monitor C)
  .......... Manufacturer ID = HWP VESA
  .......... Device ID = 26FB
  .......... Manufacturing date = 4/2009
  .......... Serial number = CNK9170083
  .......... Name of the model = HP L2245w
  .......... EDID Version = 1.3
  Monitor D)
  .......... Manufacturer ID = HWP VESA
  .......... Device ID = 26FB
  .......... Manufacturing date = 4/2009
  .......... Serial number = CNK9170083
  .......... Name of the model = HP L2245w
  .......... EDID Version = 1.3
  Monitor E)
  .......... Manufacturer ID = NEC VESA
  .......... Device ID = 61BE
  .......... Manufacturing date = 7/2001
  .......... Serial number = serial number not found in the EDID data
  .......... Model name model = not found of the EDID data descriptor
  .......... EDID Version = 1.3

• Unable to set the resolution of the screen for an external monitor

  I'm trying to set up an external monitor to Asus to mirror my iMac 27 "new using a HDMI > Lightening connection, but using the monitor preferences, requires both screens at the same resolution. The Asus monitor is smaller, I'm looking for mirror to a proper resolution to the screen (that I can actually read!). From what I gleaned on the web until now, so it should be easy - and now I think it has to do with the HDMI connection on the monitor. Any advice would be much appreciated!

  Tom Kloster

  Portland, Oregon

  You will need to disable mirroring.

• I am trying to connect a Macbook Pro with Retina display for a new monitor Dell Ultrasharp 3014. I tried to connect via HDMI and DVI cable supplied with the monitor but the monitor says "no cable dvi - d".

  How to connect a Macbook Pro with the (just bought) Retina display for a Dell Ultrasharp U3014's new? I tried to connect with HDMI and DVI cable supplied with the monitor but the monitor says "no dvi - d" cable. I never tried to do that before so I'm lost.

  Use a mini-displayport cable. Connect to one of the ports Thunderbolt the MacBook Pro to ultra-compact monitor entry.

• Satellite A100-02 b PSAAR: trick to be able to save for the multi monitor users

  Hi, people

  I always use an external as extension of office monitor when I connect my Tosh to AC.
  And I just found out, when I plug it all and go truly mobile, the graphics card still provides a signal to the VGA Port for the then nonexistent extern monitor.

  On my Satellite A100-02 b (PSAAR) that consumes about 2 Watts, which means about 10% of the duration of battery life, which is about 20 minutes!
  So, if everyone did the same thing
  -Place a link on your desktop or startmenu to 'C:\Windows\System32\control.exe desk.cpl"to have quick access to the settings of the monitor
  -turn off the monitor 2
  - and enjoy longer battery life!

  It's on my Vista, I don't know how XP performs...
  Welcome, Matz

  Hello

  Thanks for the very useful info.
  I think it could be very useful for everyone who uses batteries very often.

  Good bye

• HP EliteDesk 800 G1 SFF: HP EliteDesk 800 G1 SFF: using VGA and DisplayPort simultaneously for double configuration monitor

  If the title says it all. I'm trying to set up two monitors on my HP EliteDesk 800 G1 SFF. Here is my configuration:

  1. first monitor (Acer B223W) lights DisplayPort and displays things normally.

  2. second monitor (HP LP2065) is on the VGA port.

  The problem is that my second port monitor never gets a signal from the machine and going to sleep mode. Connect the second monitor changes my main screen at a desk empty (no icons, no taskbar, just a plain painted paper), which I believe means it tries to use my VGA monitor as main display.

  However, the VGA monitor never seems to show anything. I spent my main screen on the first monitor successfully too, but is not all about him either.

  Dear customer,

  Welcome to the HP consumer's Support Forum!

  Please try and update the video driver following, chipset and BIOS:

  Intel Graphics Driver (64-bit) (International):

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5387481&swItemId=vc_140415_1&swEnvOid=4059

  Intel Chipset drivers:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5387481&swItemId=vc_124826_1&swEnvOid=4059

  BIOS:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5387481&swItemId=vc_147068_1&swEnvOid=4058

  In case the problem persists, please exchange the monitor and VGA cables cables once and check.

  Try and clear CMOS by following the steps below:

  1. turn off the computer and unplug the power cord from the power outlet.
  2. remove the access panel.
  3. on the system board, hold down the CMOS button for 5 seconds.
  4. replace the chassis access panel and reconnect the power cord.
  5 turn on the computer and let it boot.

  Hope this helps, for other queries in response to the post and feel free to join us again.

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you
  GR1
  Although I am an employee of HP, I speak for myself and not for HP

• Get the error code 80070005 when trying to get windows update for HP w2207 Monitor wide screen.

  I have a Compaq Presario SR5410F computer with a large screen Hp w2207h with windows home premium and service pack 2. The computer is about 1 year and 3 months. About 6 months ago, I have an update of windows for my monitor and it failed several times when I tried to install it. I got ahold of someone at microsoft but never got an answer to my problem. The person finally told me to hide the update so it wouldn't keep trying to install. Now I have another update to my monitor and it will not be installed. All other updates installed fine. When I try to install, I get failed and the 80070005 error code.
  Anyone have any ideas on how to solve this problem? Sure would appreciate it.

  The post directly above it, the journal of Kateyes, has the following questions:

  1 looks like there is a proxy or some sort of 'intermediary' between the Windows Update software and internet.  Usually, it is a kind of dial-up, or download accelerator software or maybe internet software such as content filtering (parental control).  If you have any of these please disable and try again.

  2. you may have a proxy configured incorrectly.  Open Internet Explorer and click on Tools / Internet Options / Connections / LAN Settings button.  Here, uncheck the "Use a Proxy Server" if it is checked.  Otherwise, uncheck the box for "Automatically detect proxy settings" and close IE and try again.

  3. the problem could be another connectivity type of questions, please try the suggestions in this article:

  http://support.microsoft.com/kb/836941 - make this one article first, very good on this type of error
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80072efd

  I hope this helps.  The question is purely related connectivity, so something related to the internet connection does not work correctly.  It probably isn't and issue with your ISP, but more with the settings of Windows or other applications installed on your computer that are at the origin of the conflict. If you find my answer was what you're looking for, remember to click on the box "mark as answer" below!

• Driver Windows XP for Dell E176FP monitor

  Can someone tell me please the generic Windows XP driver for a Dell E176FP monitor?

  Hello

  1. what exactly you face the issue with drivers?

  2. you receive an error message?

  I suggest you contact the computer for drivers making.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  I also suggest you to see link and check.

  How to obtain the latest driver for your Dell printer updates.

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=266495#driver-update-2

  Reference Dell E176FP Flat Panel Monitor

  http://support.Dell.com/support/eDOCS/monitors/E176FP/en/index.htm

• Need driver win7 for Vista H233H monitor

  Hello, I just bought a new processor & Win and am having problems with my monitor H233H. During a cold start the monitor not acknowledge a connection with the new CPU until I turn off the power button on the monitor. When the monitor restarts - Acer appears - then it goes directly to my desktop - everything will be good until it lights up my screensaver. Then I have to turn off the monitor again.

  I see the driver site Acer that a Vista OS is listed for this monitor. Is there an another monitor driver that support Win7 I might have better luck with?

  Thank you!

  Solved the problem...

  Bought a new 27 "AOC montor. Pluged into the HDMI and things were Golden. I don't understand why Acer failed to write a new driver code for a monitor that was purchased in 2010 for Win 7?

  Makes me do not want to go back on the road to Acer.

• Help with cloning of my screen of my HP laptop for my AOC monitor

  I have a 17 "HP ProBook 4710 running XP and want to clone my display to a portable monitor, AOC F19s LCD widescreen, for demos of software. When I click fn f4 I can't get it to appear on one or the other screen and not on both. I tried changing the settings but nothing seems to work. My colleague hooked up to his laptop to my screen and it worked instantly, so I realize it's something in my settings.

  When I click fn f4 there is present the display on my laptop or the other monitor, but not both and I have also a strange result - the laptop shows my normal display and the monitor shows a blue color and my cursor moves on the monitor and vice versa.

  I can not also display on my laptop and my projector - this issue seems to be related. I tried "/ settings display/uncheck"extend my desktop to this monitor"- which made no difference." -still the same problem.

  Help, please.

  Hello

  Check to see if the following is useful.

  Method 1: You can check if you have followed the same steps as described in this article.

  How to configure and use multiple monitors in Windows XP

  See also:

  Two monitors: how to connect two monitors to one computer

  Method 2: To the projector, you can follow the steps mentioned below.

  a. connect the external monitor to the laptop on the monitor or projection system and turn on the projector.

  b. for more information on the connection of external devices, see the documentation for your laptop.

  c. set your computer laptop display resolution to match the resolution of the projector system

• Brightness for HP19-2113w monitor

  Monitor is very bright which is part of my job is to color correct photos and they look washed out, even when they are not. I have already entered into the settings and also brought down as he goes the cursor brightness is there anything I can do to darken the screen? With the help of Windows 8.1.

  Hello Antiqueray,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you are having problems of adjustment of the brightness of the screen on your HP 19-2113w all-in-one desktop PC. Since you have already paid it through the sliding bar I will provide a few extra steps, you can try below:

  Step 1. The type of tile Menu "control panel."

  Step 2. Click on the control panel

  Step 3. Click on system and security

  Step 4. Click on Power Options

  Step 5. Click on change plan next to the balance (recommended) option settings (if you use a different option click on that one instead)

  Step 6. In the next window that appears, move the horizontal right to left sliders to reduce the brightness of the screen

  Please re-post if you need extra support. Thanks for posting on the HP Forums. Have a wonderful day!