should make a new network if I replace my existing router

Similar Questions

• Why the window asking if I want to make my new network domestic or public when I already a network set up. My original network now has a 2 square brackets also.

  I left my computer for my magic jack so I can receive calls.   When I woke in the morning, there were two open windows.   One was the new network

  window and the other was the window asking if I wanted to do a home network or public.   Does that mean someone hacked my computer?

  The fact that my network connection now has a (2) beside it means I have now two netowrk connections runinning.

  The system seems much slower and takes about 10 seconds to respond to the movements of the mouse if it has been sitting for awhile.

  Help, please

  Computer illiterate fool

  2 hooks would duplicate and feel safe to remove.

  If this is not the case, of course, run a spyware scan online TrendMicro Housecalls.

  http://housecall.trendmicro.com/

  I would contact Magic Jack support with this issue

  http://www.magicjacksupport.com/

• Cannot stay connected to the network, even after replacing my old router.

  I have a laptop Toshiba Satellite L655 is one year old and its operating system is Windows 7 home Premium I have Comcast internet service and use a NetGear wireless router.

  Recently, about 2 months ago I got this router in Comcast, in replacement of my old 1. Why I asked that a new router was the former 1 had problems to stay connected to the internet. The problem persisted even with the new router so I look at it is not not a problem with Comcast or the router. I tried resetting the connection, the son, restart the router, diagnostics running on my laptop and are not yet able to resolve the problem. I run disc optimization, defragment the hard drive, run many virus / spyware scans and tried to disable startup programs as much as possible. This problem has frustrated me for months and I want to get it resolved. It sucks paying all that money for equipment and service and there not work directly without having to spend more money, which I have unfortunately not yet. Any help is very appreciated.

  Hello

  You can check this link:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• MacBook Pro 2.6 13 "mid 2014 8 GB. the HD is fried by virus. should I just take w Apple and replace a new SSD and you know how much $ would cost me? Thank you in advance.

  my MacBook Pro 2.6 GHZ I5 (mid-2014) 3 MB shared level 3 cache, 8 GB on-board 1600 MHz DDR3L SDRAM. the HD is fried by virus. should I just take w Apple and replace a new SSD and you know how much $ would cost me? Thank you in advance.

  Quan

  Contact ask an ANDS Apple Store.

  However, what makes you think that a virus fried your HD?

  Looking at it

  https://en.Wikipedia.org/wiki/MacBook_Pro

  Initially, you Mac Pro came with an SSD.

  Just what failure symptoms are you having? Maybe your SSD did not fail.

  If necessary and if yo are up to it you can replace the SSD yourself

  https://eShop.MacSales.com/shop/memory/Apple_MacBook_MacBook_Pro/upgrade/DDR3_16 00MHz_SDRAM

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• Should I make a new Apple ID?

  A week ago my twitter has been hacked and I use the same email to my ID Apple and twitter. I changed my password on the Apple ID, just in case but you think it would be smart to just a new Apple ID?

  If you have changed your password, you should be fine. Make a new Apple ID should only be done last if you don't lose in fact control on your account without any chance to get it back (and it didn't). You can read this: If you think that your ID Apple has been compromised - Apple supports

• There is no recovery of replacement key account ID apple under the Security section.  How to make a new recovery key number?

  In the support section for a lost 'recovery' for two-step verification key, he pointed out that a recovery of replacement key can be generated on account of ID apple under the Security section.  However, it is not located there.  How can I make a new recovery key?

  Thank you.

  I just checked https://appleid.apple.com/account/manage and it shows (for me) after I click the button Edit in the Security section. Two possibilities - 1) this is the bottom of the screen on my screen so I need to scroll down to see it and 2) If you scroll further down after clicking on the button Edit in the Security section, does show that the two-step verification is on?

• Hi all, I have an iMac (21.5 inch, mid 2011) with 4 memory slots, 2 has 2 GB each, is it OK to put a 4 GB in each of the empty slots or should I buy 4 new 4 GB and replace all, Sebastian Cheers

  Hi all, I have an iMac (21.5 inch, mid 2011) with 4 memory slots, 2 have a 2 GB each, is it OK to put a 4 GB in each of the empty slots or should I buy 4 new 4 GB and replace all, Sebastian Cheers

  You can put 2 x 4 GB DIMMS in the empty slots, this will give you a total of 12 GB. iMacs are very sensitive to the RAM, it is best to buy RAM from reliable sources like Crucial (direct purchase) or OWC OWC RAM

• My photography plan has expired during the first month, I can't update and make a new payment, what should I do?

  My photography plan has expired during the first month, I can't update and make a new payment, what should I do?

  You can also make reference to: FAQ: what should I do if I have a subscription, but my application acts as if I had a trial?

• Printing error 0 x 00000709 when I try to make my new HP Officejet e-all-in-one printer default

  Print 0 printer error x 00000709 when I try to make my new HP Officejet e-all-in-one printer default.  I removed the old printer, uninstalled it, theinstalled HP Officejet (former was an HP Photosmart all-in-one).  I rebooted, everything I can think of.  I spent hours (overnight) through countless services for troubleshooting.  Can someone help me please?  Need of college courses

  . From Internet Explorer

  Original title: error printer print 0 x 00000709

  Hi PattiVan,

  It seems that you can not set HP Officejet 4620 as default printer, you get the error message: 0 x 00000709.
  
  What is a local printer or network printer?
   
  We will try the following methods and check if they helps us to solve the problem.

  Method 1: Try to change the default printer value in the registry key and check if it helps.
  

  Registry WARNING: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see this link: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  (a) click Start.

  (b) type regedit in start search and press enter.
  (c) access the site mentioned below.

  HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows
  (d) in the right column, you will find key device, change the value of your printer name.
  (e) it is for example in the format: "HP LaserJet 4250 PCL6, winspool, Ne03:

  (f) right click on the value and click Rename, replace with the name of your printer.
  
  Method 2: Try the steps from the link.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 3: Let's connect on another user account and check if you can configure the printer as the default printer.

  If it works in a different user account, then the user account is damaged.

  
  

  Refer to this link and create a new user account, copy files to the new user profile

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope this helps!

• Unable to create the new network former TC

  Hello

  So I have the current generation of TC acting as a router as well as a HDD on my old to wide wireless broadband. I experienced some problems with connectivity recently (where my MacAir shows that I am connected to the internet, but no matter what site I try to access everything simply does not load and ends up with a progression of Ribbon on the address bar of Safari-turn off and turn on the power back constantly solves the problem), but this is not what I am asking today. Recently, I had the new optical fiber internet for my house and got a new modem and everything has been installed. Only one of the four ports in the modem seems to work, but at least it works. The D-link router that came with it works fine, but I want to use my TC as the router instead. However, whenever I connect the TC on the working port, I am unable to connect. Airport utility, the lights of TC in green but 'Internet' is yellow, i.e. does not work correctly. It should be a problem with the TC because the D-link router works on the same port and connection ethernet via a thunderbolt on the same port adapter works perfectly fine as well.

  Is this a problem with the old settings on my TC being incompatible with the new network? Please advise, thank you very much!

  There are at least 2 different issues at stake here and possibly 3.

  A question is that whenever you change the modem or the router that connects the TC, or your provider of Internet services, the TC must be reset back to settings by default, and then set it up again to work properly with the new product and the new service.

  You don't mention how old your 'old' Time Capsule can be, but 3 years is on the average life of the time Capsule, if anything more than 3 years will be suspicious where reliable operation.

  The third possible cause is that only a single port of your modem/router works when the four should work. If this is a real problem here, we can't say, but you have to wonder a little about the reliability of a product that doesn't seem to work properly

• Make a new file using the "Save as".

  Bit of feedback to the staff HERE...

  We use LabVIEW 8.6. and, at least in this implementation, trying to make a new VI using the command save as product a menu of choices, including none make sense to me. Sorry, but I can't say which of them will produce only makes a new file with a changed name to be refined. Trial and error product folders, but not files, replaces the original file (why would I do that, I chose save as no record) and about each result other than what I was trying to accomplish.

  May you fix this in a future release, but for 8.6, I feel that I must take a class just to save the new file.

  you're not alone...

  Have you tried "open extra copy?  This is probably what you want.  It will not copy the original and will keep the open source.

• Installed New Netgear Wireless Range extender but new network doesn't have internet access.

  I just installed a machine net universal range extender for WiFi and the signal over the Wan is very strong, but when I connect to him he says that have no internet access. What should I change? I post what I'm on the Ext network.but when I try to access other sites, it won't let me.

  I had the same problem as you and searched everywhere for a positive response and have not had a. I was about to return the netgear Extender when I, fortunately, has found a way around this strange problem.
  In fact, it's really simple, and I encourage really all those who eventually get this problem complain to netgear not having their detailed in the guide installation process that they shipped with the product.

  In my case, I have a WEP encrypted network.

  If you can't access the web interface of the Extender, you need to reset the device by inserting a paper clip in the small hole next to the WPS button (if you don't know already).

  When you are prompted for the encryption key and password for the network existing (the original one), you MUST WRITE THE PAST ON THE INPUT FIELD KEY word select and not the field the password. You can choose one of the 4 input key fields, but you MUST write the password on one of them and leave the field blank password (I think it's just for the WEP encryption, which is my case).

  I also changed the encryption type for the new network "_EXT" from WEP to WPA/TKIP but kept the same password.

  After the connection is complete the Extender successfully verified updates and all the IP addresses are assigned automatically via DHCP.

  I hope that I answered in the time before returning the Extender because I don't have a kind of complained after doing this.

  Good luck
  Marlon.

• I just got a new supplier of cable installed at home and now we find that our usual printer print wireless. How can I add this to the new network?

  I just had a new supplier of cable installed at home and now we recognize that our habit of printing wireless printer, how can I add this to the new network?

  Hello

  • What is the brand and model of the printer?
  • What happens when you try to print?
  • You receive an error message?

  You can view these methods:

  Method 1:

  Disable the firewall and check.

  The Windows Firewall is enabled by default in this version of Windows. To make sure that it has not been disabled, follow these steps:

  1. open the Windows Firewall by clicking the Start button, then Control Panel. In the search box, type firewall and then click onWindows Firewall.

  2. in the left pane, click turn Windows Firewall on or off. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. below for each type of network location, click on disable Windows Firewall, and then clickOK. We recommend that you turn on the firewall for all network location types.

  For more information, visit the following link:

  http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-Firewall-settings

  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

  Method 2:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  See also:

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer-on-a-home-network

• HP Officejet 6700 Premium: Unable to connect to the new network HP 6700

  I just changed networks and want to connect my HP Officejet 6700 Premium to the new network.

  In the control panel of the printer, I accessed network / Wireless Installation Wizard.  When I do, I get the message:

  Locking function

  This feature has been locked by your system administrator or the person who set up the printer.

  There is an OK button, but no other options.

  I get the same message when I tried to access a WiFi Protected Setup, and, for good measure, the default system restore.

  There is no administrator, in itself, because I'm the one who has set up the printer.  I'm rulnning a MacBook Pro on OS X El Capitan.

  Please, help me to know what I need to do to connect my printer to the network so I can print.

  Thank you very much for taking the time to answer and especially for providing additional resources should what was being offered as a solution to not work.

  I have tried your solution several times and kept getting the same message.  I tried shuttig the printer off by pulling on the power cord, stop in the right way, reverse iin, etc..  Nothing removed the error.

  Then I took the printer to a local Best Buy to show them the problem, which was at home.  We tried it a few times, and then, for no reason whatsoever (seems), it allowed us to do a reset.  No one knows what was different.

  My advice for anyone with the same problem is completely unplug it, let it sit for a while, keep trying and hope for the best.

• Contacts in Windows Mail doesn't have to 'Make a new Contact Group' in the toolbar

  I'm unable to create a distribution list, because the option 'Make a new Contact Group' does not appear in my Contacts toolbar. Also the "Add a new Contact" option does not appear in the toolbar. The only options that appear are «organize...» Display... Burn. " I don't get any menu when I right click on the toolbar.

  I use Windows Vista Home Premium on a laptop Gateway.

  I also found the answer!
  As said above Nimbostratus, but here's another way to do the same.

  OPEN your contacts folder

  In the left column of the screen, you should see your CONTACTS folder. Right click on it.
  Who should bring up the menu drop down and then click on PROPERTIES.

  One of the tabs is called CUSTOMIZE. Click on this

  The first line says: "what kind of folder do you want?
  I bet you anything that he does not say CONTACTS just below that!
  Change it to CONTACTS and all your problems 'create a new contact group' are now solved...