Should System Center I download?

Similar Questions

• Problems installing System Center Data Protection Manager 2010 in Server 2008 r2 DataCenter

  I try to install DPM 2010 and I installed all 4 of the installation of packages and they are all in the same folder according to the installation instructions on Microsoft Technet for DPM site 2010 and I clicked on the 1st package install and it unpacks the original installation package and it brings up the install window install data protection manager and clicked on install and I get the following error on the redistributable Visual C++ - Redistributable package Installation of Visual C++ has no... Run vcredist_x64.exe \redist\vcredist\ to install vcredist and re-run Setup.

  Whenever I tried to install the vcredist_x64.exe which was provided with the download I get the error that it cannot install, tht, there was an unexpected error.

  I downloaded the redistributable Microsoft and tried to install it, but the 2010 version is already installed and I could not install the version of 2008 on the 2010 version. I tried to download Visual C++ 2008 redistributable sp1 and installed correctly but when I come back and you try to install the System Center DPM 2010 setup.exe it always tries to go to the folder with the not redistributable sp1 provided with the download and it freezes in half way through even though the correct redist "is installed for server 2008 r2 x 64.

  Anyone got any suggestions? I've been searching and trying to figure out for hours and I don't see anything in the KB for DPM 2010 or technet.

  Hi osiguy,

  Since the problem is related to the Data Protection Manager, I suggest that you post your question in the following forum.

  Forum for Data Protection Manager

• Media Center Guide download stopped download after years... no error message.

  Windows Vista 32 SP2

  After years of good Guide ads download of my system just stopped downloading updated lists of programs.  Media Center said that it downloads successfully but not so much.  No error message.  I tried to re - configure the Guide in Media Center.  I tried to manually download updated program listings.  I uninstalled updates 11/04/12 NETframe4 have read that they can be problematic.  I restored to the 10/04/12, which is just before the big update 11/04/12.  None of this worked and my recorded shows stop at 5 pm PT 19/04/12.  What is the answer?  Thank you.

  BobJ1620

  There are several recent reports of problems with the guide data. Some people
  declare that the guide has finally started in. you can try to fill a
  neighbor of zip code and see if you get better results and then switch back to
  your code.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• When someone comes in! * they should be able to download the file, how can I do?

  Original title: Hello

  Hello

  people you know out

  Here I want to insert a file

  When someone enters

  ***!***

  they should be able to download the file

  using System;
  using System.Collections.Generic;
  using System.Linq;
  using System.Text;
  using System.Threading.Tasks;

  namespace NewProject
  {
  Class Program
  {
  public static void Main (string [] args)
  {
  Console.WriteLine;
  Console.WriteLine ("How are you");
  String a1 = Convert.ToString (Console.ReadLine ();
  if (a1 == "***!***")
  {
  Console.WriteLine ("you are great");
  Console.ReadLine ();
  }
  Console.WriteLine ("what you do");
  String a2 = Convert.ToString (Console.ReadLine ();
  If (a2 == "!") *!!!")
  {
  Console.WriteLine ("you are great");
  Console.ReadLine ();
  }
  Console.WriteLine ("end");
  Console.ReadLine ();
  }
  }
  }

  Hi stevoo,

  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums.

  To contact the MSDN support, you can use the following link.
  http://social.msdn.Microsoft.com/forums/en/categories

  Hope this is useful.

• should which driver I download? Help me

  Hello

  probook HP 4540 s base model

  my product number: A5S82AV

  PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C & REV_00
  PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C
  PCI\VEN_1814 & DEV_3290 & CC_028000
  PCI\VEN_1814 & DEV_3290 & CC_0280

  should which driver I download?

  me the direct download link.

  Thank you

  Hi 14saba14

  MediaTek (Ralink) 802.11 b/g/n wireless network (WLAN) card

  Windows 7/8 (32/64-bit)

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66089.exe

  8.1 for Windows (32/64-bit)

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63302.exe

• Event ID 1530 in a System Center environment

  Hello

  On a Windows Server 2008 R2 with System Center installed, we have the following warnings:

  Windows detected your registry file is still in use for other applications or services. The file will be unloaded now. Applications or services that keep your registry file may not work properly thereafter.

  DETAIL-
  Register User 15 handles is escaped from \Registry\User\S-1-5-21-1715555822-179605362-839522115-8025:
  26452 (\Device\HarddiskVolume2\Program Files\Microsoft System Center\Service Manager 2010\MonitoringHost.exe) open \registry\user\s-1-5-21-1715555822-179605362-839522115-8025-cles
  26452 (\Device\HarddiskVolume2\Program Files\Microsoft System Center\Service Manager 2010\MonitoringHost.exe) open \registry\user\s-1-5-21-1715555822-179605362-839522115-8025-cles
  26452 (\Device\HarddiskVolume2\Program Files\Microsoft System Center\Service Manager 2010\MonitoringHost.exe) open \registry\user\s-1-5-21-1715555822-179605362-839522115-8025-cles
  26452 (\Device\HarddiskVolume2\Program Files\Microsoft System Center\Service Manager 2010\MonitoringHost.exe) open \registry\user\s-1-5-21-1715555822-179605362-839522115-8025-cles
  26452 (\Device\HarddiskVolume2\Program Files\Microsoft System Center\Service Manager 2010\MonitoringHost.exe) open \registry\user\s-1-5-21-1715555822-179605362-839522115-8025-cles
  26452 (\Device\HarddiskVolume2\Program Files\Microsoft System Center\Service Manager 2010\MonitoringHost.exe) open \REGISTRY\USER\S-1-5-21-1715555822-179605362-839522115-8025\Software\Microsoft\SystemCertificates\trust key
  26452 (\Device\HarddiskVolume2\Program Files\Microsoft System Center\Service Manager 2010\MonitoringHost.exe) open \REGISTRY\USER\S-1-5-21-1715555822-179605362-839522115-8025\Software\Microsoft\SystemCertificates\My key
  26452 (\Device\HarddiskVolume2\Program Files\Microsoft System Center\Service Manager 2010\MonitoringHost.exe) open \REGISTRY\USER\S-1-5-21-1715555822-179605362-839522115-8025\Software\Microsoft\SystemCertificates\CA key
  26452 (\Device\HarddiskVolume2\Program Files\Microsoft System Center\Service Manager 2010\MonitoringHost.exe) open \REGISTRY\USER\S-1-5-21-1715555822-179605362-839522115-8025\Control Panel\International key
  26452 (\Device\HarddiskVolume2\Program Files\Microsoft System Center\Service Manager 2010\MonitoringHost.exe) open \REGISTRY\USER\S-1-5-21-1715555822-179605362-839522115-8025\Software\Microsoft\SystemCertificates\Root key
  26452 (\Device\HarddiskVolume2\Program Files\Microsoft System Center\Service Manager 2010\MonitoringHost.exe) open \REGISTRY\USER\S-1-5-21-1715555822-179605362-839522115-8025\Software\Microsoft\SystemCertificates\SmartCardRoot key
  26452 (\Device\HarddiskVolume2\Program Files\Microsoft System Center\Service Manager 2010\MonitoringHost.exe) open \REGISTRY\USER\S-1-5-21-1715555822-179605362-839522115-8025\Software\Microsoft\Windows\CurrentVersion\Explorer key
  26452 (\Device\HarddiskVolume2\Program Files\Microsoft System Center\Service Manager 2010\MonitoringHost.exe) open \REGISTRY\USER\S-1-5-21-1715555822-179605362-839522115-8025\Software\Policies\Microsoft\SystemCertificates key
  26452 (\Device\HarddiskVolume2\Program Files\Microsoft System Center\Service Manager 2010\MonitoringHost.exe) open \REGISTRY\USER\S-1-5-21-1715555822-179605362-839522115-8025\Software\Microsoft\SystemCertificates\TrustedPeople key
  26452 (\Device\HarddiskVolume2\Program Files\Microsoft System Center\Service Manager 2010\MonitoringHost.exe) open \REGISTRY\USER\S-1-5-21-1715555822-179605362-839522115-8025\Software\Microsoft\SystemCertificates\Disallowed key

  The user S-1-5-21-1715555822-179605362-839522115-8025 is the user workflow.

  We have a workflow (written in c#), which runs a powershell script. This sometimes results in the following error:

  System.NullReferenceException: Object Reference not set to an instance of an object.
  at System.Environment.GetEnvironmentVariable (String variable, target EnvironmentVariableTarget)
  at System.Management.Automation.ModuleIntrinsics.GetExpandedEnvironmentVariable (String name, target EnvironmentVariableTarget)
  at System.Management.Automation.ModuleIntrinsics.SetModulePath)
  at System.Management.Automation.ExecutionContext.InitializeCommon (AutomationEngine, PSHost hostInterface engine)
  to System.Management.Automation.AutomationEngine... ctor (PSHost hostInterface, RunspaceConfiguration runspaceConfiguration, InitialSessionState iss)
  at System.Management.Automation.Runspaces.LocalRunspace.DoOpenHelper)
  at System.Management.Automation.Runspaces.RunspaceBase.CoreOpen (Boolean syncCall)

  I think that both the warning and exception, are related. But I don't know what the problem is.

  Can someone help, please?

  Thank you

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• System Center r2 2012

  I work in a school and I can see through our volume license console we have System Center configuration manager 2012 r2 in there. Are we able to obtain the System Center service manager r2? how much is it to add to our licenses.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• System Center Orchestrator 2012 R2 + Powershell module

  Hello

  I'm new here and just start using System Center Orchestrator 2012 R2.

  I created a file to play a Powershell Script that imports a module.

  The PS module has been deployed to all servers in folders.

  Executing files, it can't... I founf out that the new PS module is not imported through the host of orchestrator runs the script.

  to debug, I have performed in a test files:

  Get-module-list | out-file c:\temp\modules.txt

  and the new PS module is not listed in the file put out!

  I need to reboot servers in folders (or services) to get the new module PS imported successfully?

  Thanks a lot guys.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• System Center Configuration Manager in Windows Server 2012

  Hi all..

  I am novice in this community... and I would ask to System Center Configuration Manager that runs in Windows Server 2012...
  where can I get a full tutorial or reference on this subject? or someone has already made to configure the SCCM? Please share...

  Best regards...
  Chozy

  Hello

  SCCM is supported on the following forums.

  SCCM 2012 - general
  http://social.technet.Microsoft.com/forums/en-us/home?category=systemcenter2012configurationmanager
   
  
  Concerning

• P2V - System Center Virtual Machine Manager 2008 R2

  I am running Microsoft System Center Virtual Machine Manager 2008 R2 on a Windows Server 2008 R2 with SP1 enviornment.

  I am creating a P2V Conversion in the P2V Assistant and 'Conversion of information' section, I get the following error message:

  Error (3210):

  And\pr boot volume system \\?\Volume{2dbb99c1-ba73-11de-97ae-806e6f6e6963}\ was not selected or is not found on the

  source machine >.

  Recommended action:

  Selected machine > cannot be virtualized. Verify that the system volumes and boot are selected for migration. So try

  try the operation again.

  Environmental information:

  Source server:

  • Windows Server 2008 R2 with Service Pack 1
  • Roles: Domain Services Active Directory, DNS, DHCP, printing and service of documents, files, & network policy and Access Services
  • Discs: C:\(OS) & D:\(File Share)

  Destination server:

  • Windows Server 2008 R2 with Service Pack 1
  • Roles: Files, Hyper-V services (IIS) Web server
  • Discs: C:\(OS) & D:\(VHD Files)

  Information about the conversion:

  • Configuration of the volume: (selected Volumes-C:------, D:\ & disk: Partition 0: 0)
  • "Offline conversion" because of the following warning: disk hardware or the file system on the volume \\?\Volume{2dbb99c1-ba73-11de-97ae-806e6f6e6963}\: is not supported by Volume Shadow Copy Service.

  I don't know what the problem or prevent this from happening. Assistance in this matter is greatly appreciated. Thank you.

  Hi Christophe,

  According to the description looks like you have a problem with a particular program in Windows server 2008, I suggest you post this question in this forum for further assistance.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Hope this information helps. If you have questions about Windows do not hesitate to answer and we will be happy to help.

• Support of virtual laboratory System Center Operations Manager 2012

  When I try to start the lab that I get the below error.

  Date: 11/08/2012 20:36:12
  Application: System Center Operations Manager 2012
  Application version: 7.0.8289.0
  Severity: error
  Message: Unable to connect to the server "OM01.

  Microsoft.EnterpriseManagement.Common.UnknownServiceException: The service threw an unknown exception. See inner exception for more details. ---> System.ServiceModel.FaultException'1 [System.UnauthorizedAccessException]: the creator of this fault did not specify a reason.

  Server stack trace:
  at System.ServiceModel.Channels.ServiceChannel.HandleReply (ProxyOperationRuntime, ProxyRpc & rpc operation)
  at System.ServiceModel.Channels.ServiceChannel.Call (String action, ProxyOperationRuntime, Boolean, Object [ins] oneway operation, Object [], TimeSpan timeout breaks)
  to System.ServiceModel.Channels.ServiceChannelProxy.InvokeService (IMethodCallMessage methodCall, operation of ProxyOperationRuntime)
  at System.ServiceModel.Channels.ServiceChannelProxy.Invoke (IMessage message)

  Exception thrown once again [0]:
  at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage (IMessage reqMsg, IMessage retMsg)
  at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke (MessageData & msgData, Int32 type)
  at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect (SdkClientConnectionOptions, connectionOptions)
  at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize (EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject 1 channelObjectDispatcherService)
  to Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint [T] (EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject 1 channelObjectDispatcherService)
  -End of the exception stack trace internal-
  at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions (Exception ex)
  to Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint [T] (EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject 1 channelObjectDispatcherService)
  in [T, P] Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal (EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore clientCallback)
  in [T, P] Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal (EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
  in [T, P] Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect (EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
  at Microsoft.EnterpriseManagement.ManagementGroup.InternalInitialize (EnterpriseManagementConnectionSettings connectionSettings, internal ManagementGroupInternal)
  at Microsoft.EnterpriseManagement.Mom.Internal.UI.Common.ManagementGroupSessionManager.Connect (String Server)
  to Microsoft.EnterpriseManagement.Monitoring.Console.Internal.ConsoleWindowBase.TryConnectToManagementGroupJob (ByVal sender As Object, args to ConsoleJobEventArgs)
  System.ServiceModel.FaultException'1 [System.UnauthorizedAccessException]: the creator of this fault did not specify a reason. (Fault detail is equal to System.UnauthorizedAccessException: you have exceeded the period of assessment of this product.) Please upgrade to the release to continue using the product. For more information on the purchase of the retail version of this product, go to http://go.microsoft.com/fwlink/?LinkID=74446.
  at Microsoft.EnterpriseManagement.ServiceDataLayer.SessionManagerService.Connect (SdkClientConnectionOptions options)
  at Microsoft.EnterpriseManagement.ServiceDataLayer.BasicDispatcherService.Connect (SdkClientConnectionOptions, connectionOptions)).

  Hello

  Your question is addressed in the Microsoft Answers forums. It is better handled by the audience ITPro on the Technet Forums.

  System Center - Operations Manager category:
  http://social.technet.Microsoft.com/forums/en-us/category/systemcenteroperationsmanager

  Concerning

• My Vista system trying to download the updates, and it does not complete the download. It is up to "Windowsupdate_00000646" and "windowsupdate_dt000" How do I clear this code to receive these updates?

  My Vista system trying to download the updates, and it does not complete the download. It is up to "Windowsupdate_00000646" and "windowsupdate_dt000" How do I clear this code to receive these updates?

  They are only updated office or all updates?

  For Office updates, usually to pick up the item at the: http://www.microsoft.com/downloads/en/default.aspx

  then manually download and install the same.

  If all updates, perhaps consider the following general tips-

  Option: File of Windows Update agent wups2.dll is incorrectly registered and the registry associated with the Wups2.dll file files are missing.

  Method 1: Save the Windows Update files

  1. Click Start and type notepad in the box start the search.
  2. click on Notepad in the list programs.
  3. copy the following commands, and then paste them into the opened Notepad window:
  REGSVR32 WUPS2. DLL/S
  REGSVR32 STINKS. DLL/S
  REGSVR32 WUAUENG. DLL/S
  REGSVR32 WUAPI. DLL/S
  REGSVR32 WUCLTUX. DLL/S
  REGSVR32 WUWEBV. DLL/S
  REGSVR32 JSCRIPT. DLL/S
  REGSVR32 MSXML3. DLL/S
  4. in Notepad, on the file menu, click Save as.
  5. in the file type list, click all files.
  6. in the file name box, type register.bat.
  7. save the Register.bat file to your desktop.
  8 right-click the Register.bat file, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password or click on continue.
  9. try to reinstall updates.

  http://support.Microsoft.com/kb/958053
  See: method 1: save the Windows Update files

  http://support.Microsoft.com/kb/326253
  Method 5: Registry Windows Update engine files

  http://support.Microsoft.com/kb/971058
  How to reset the Windows Update components?

  Method 2: Download and install Windows Update agent

  Windows Update Agent

  How to get the latest version of the Windows Update Agent to help manage updates on a computer
  http://support.Microsoft.com/kb/949104

  Information for network administrators about how to obtain the latest Windows Update Agent
  http://support.Microsoft.com/kb/946928

  Click Start, click run, click Browse, navigate to the file you saved and click Open.

  Add the switch /wuforce at the end of the command run and then click OK. For example, the command run might look like this: "C:\WindowsUpdateAgent30-x86.exe" /wuforce

  Click run.

  Follow the steps to complete the wizard.

  Important

  To reinstall Windows Update Agent - download the relevant file from one of the links provided above and save it to a drive where Vista is not loaded because the file cannot be launched directly from the root directory of the system.

  Click Start, run, type: "D:\WindowsUpdateAgent30-x86.exe /wuforce" (without the quotes) and press ENTER to install the Windows Update engine.

  Note: There is a space between "D:\WindowsUpdateAgent30-x86.exe" and "/ wuforce.

  D: is the drive where Windows is not installed (IE a flash drive or a 2nd hard drive etc.)

  TaurArian [MVP] 2005-2010 - Update Services

• My system will not download upgrades and assistant says update error 0x8024402c

  * Original title: win 7 64-bit ultimate on asus kgpe map server dual socket

  my system will not download upgrades and assistant says update error 0x8024402c (2016-03-29-T-10_53_07a)... whats up?

  Turns out that my computer has a virus, of which a part had apparently obtained in the area of the 100 MB of my raid0 array system.  When I reloaded the os I've removed then reinstalled the partitions, then reloaded the software and my problem calmed.  Thanks for your ideas.

• difference between the configuration of System center 2012 & central Office Manager

  Can someone give me the difference between the configuration of System center 2012 & version 8 Central Office Manager please.

  Hello

  I suggest you complete differences of the research for yourself. You can ask your question on the System Center forum and contact support central Office for more information.

  http://social.technet.Microsoft.com/forums/en-us/configmanagergeneral/threads

  I hope this helps.

• I have a PC CS6 license. So I bought a Mac. What should I do to download CS6 on my Mac

  I have a PC CS6 license. So I bought a Mac. What should I do to download CS6 on my Mac

  If the serial number is specific to Windows, you can not use it on Mac OS.

  However, if you wish, you can opt for the swap of platform from PC to Mac, but it is a process of time and cannot be restored later, you will not be able to use the serial number on computer PC.

  You can download CS 6 at the bottom of the link:

  https://helpx.Adobe.com/x-productkb/policy-pricing/CS6-product-downloads.html

  Reference:

  Exchange a product Adobe of a different version of the language or platform