Should the change detection have limited triggers?

Similar Questions

• I keep getting these messages that do not allow to use a file. What should I change to have privileges for all functions?

  Original title: administrator Win7

  I have win7 and IE11 running on a HP 8540p.  I'm the only person authorized to use the laptop - I am the administrator.

  I keep getting these messages that do not allow to use a file.  What should I change to have privileges for all functions?

  The second file is not cooperating and was not deleted.

  "Not cooperating" can mean many different things. A real verbatim error message would be more useful. In the case of locked files, it is often possible to remove safe mode.

• Service Pack 3 has not finished click OK to undo the changes that have been made

  Internet Exolorer 8, service Pack2 installed.  Tent to download and install service pack 3 again, Error Codes: several years ago

  Not enough free space.  Free storage, Total currently 6.06 GB GB 32.3.  HP pavilion 551w.

  Error codes: 11/10/09 OX80070641, same code on 29/09/12

  04/07/13 code OX8024600

  Remove Service pack 3 and reinstalled several days ago:

  "Preparing for download.

  Backup of files

  SP3 backup file. CAB

  Backup registry

  Creation of Restore Points

  Download Service Pack 3

  The initialization of the made installition

  Win SP3 installation

  SP3 Setup file. CAB

  Error installing service pack 3 Service pack 3 installation did not complete.

  Select 'OK' to undo the changes that have been made.

  Access denied»

  Firewall and anti virus disabled for installation.  Graphic bar showed about 75 to 80% installation complete.

  So far I have not checked to undo changes.  With the od SP3 download I show 5.82 GB of free space.

  As I have not checked to undo the changes, no error code appears for this latest attempt to download and install SP3.

  When you try to install Windows XP Service Pack, you receive the error message "Access denied" or "installing the Service Pack has not completed"
  http://support.Microsoft.com/kb/949377

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

  Error message when you try to install Windows XP SP3: "you don't have enough disk space on % lecteur_systeme % to archive the uninstall files.
  http://support.Microsoft.com/kb/949375/

  Error messages when you try to install Windows XP Service Pack 3: "Service Pack 3 installation did not complete" and "an internal error has occurred."
  http://support.Microsoft.com/kb/949384/

• Should the reader really have administrator privileges?

  Just one question short and easy if all goes well. Is it really necessary for this client application to have administrator privileges?

  I ask because I am struggling to install the flash player in windows XP. If I find it absolutely necessary to have administrative privileges, I will give up as a result of the procedure.

  Thanks for your help,

  Pedro.
  

  Already answered http://forums.adobe.com/thread/1013446

• Problem with the PXI-6534 elimination change detection task

  I ran into the following problem.  I use a PXI-6534 and PXI-6602 with vb.net for detection with a timestamp of changes.  My code works fine and I get data exactly as I want, the problem comes when I try to call the task.dispose function.

  When I call him has, she throws an exception with error-200088 code, task does not exist.  But the task is still stopped and I can run my code again and everything works fine.  If I do not call the task.dispose, I get an error when I try to run my code again.  The material seems to have left in an unknown state, and I have to restart my computer to get it back. (the MAX NOR even reset the 6602, he says only that the Council does not exist).

  Interesting also is the exception thrown does not seem to be caught by the Try Catch method.  The code traverses the Try Catch without any problem (step by step in the code anyway), but with the exception, the message box appears, either immediately or when coming out of the subroutine.

  Also, I use TestStand 4.2 to call these functions, if that makes a difference.

  Any help would be greatly appreciated!  Its very frustrating that everything works and I get my data perfectly, but I can't run the code without exception popping up, and I can't seem to catch the exception.

  Here is the code I use:

      Public Sub StartChangeDetect_UUT1()
          If myCDrunningTaskA Is Nothing Then
              Try
                  ' Create the task
                  uut1ChangeDetectTask = New Task()
  
                  '************************ Create the digital input virtual channel alias
                  'Assign ports to digital virtual channel
                  uut1ChangeDetectTask.DIChannels.CreateChannel("Dev1/port0:3", "ChangeDetectUUT1", ChannelLineGrouping.OneChannelForAllLines)
                  'uut1ChangeDetectTask.DIChannels.All.DigitalFilterEnable = True
                  'uut1ChangeDetectTask.DIChannels.All.DigitalFilterMinimumPulseWidth = 0.000001
                  uut1ChangeDetectTask.DIChannels.All.InvertLines = True
                  uut1ChangeDetectTask.DIChannels.All.DataTransferMechanism = DIDataTransferMechanism.Dma
  
                  'Assign ports to monitor for change detection, both rising and falling edges
                  Dim rising As String
                  Dim falling As String
  
                  rising = "Dev1/port0:3"
                  falling = "Dev1/port0:3"
                  uut1ChangeDetectTask.Timing.ConfigureChangeDetection(rising, falling, SampleQuantityMode.ContinuousSamples, 4000000)
  
                  'export change detect event to PXI backplane so we can get timestamps from timer.
                  uut1ChangeDetectTask.ExportSignals.ChangeDetectionEventOutputTerminal = "/Dev1/PXI_Trig0"
                  uut1ChangeDetectTask.ExportSignals.ChangeDetectionEventPulsePolarity = ChangeDetectionEventPulsePolarity.ActiveHigh
  
                  'uut1ChangeDetectTask.Stream.Timeout = 20000
  
                  ' Verify the Task
                  uut1ChangeDetectTask.Control(TaskAction.Verify)
  
                  ' Set up the data table
                  Initializeuut1DataTable()
  
                  ' Create the readers for the DI and the CI
                  uut1ChangeDetectReader = New DigitalSingleChannelReader(uut1ChangeDetectTask.Stream)
  
                  uut1CDCallback = New AsyncCallback(AddressOf uut1ChangeDetectCallback)
                  uut1ChangeDetectReader.SynchronizeCallbacks = False
                  ' Set up our first callback
  
                  uut1ChangeDetectReader.BeginReadMultiSamplePortUInt32(-1, uut1CDCallback, uut1ChangeDetectTask)
                  myCDrunningTaskA = uut1ChangeDetectTask
  
                  'Set up Timer for time stamp
  
                  uut1TimeStampTask = New Task()
                  '****************set up PXI-6602 timer to get buffered change events.  ie capture timer output on  the PXI_Trig0
                  'we can then correlate this timer capture buffer to the change detect buffer to get the time stamps
  
                  uut1TimeStampTask.CIChannels.CreatePeriodChannel("Dev5/ctr0", "TimeStamp1", 0.0000001, 0.02, CIPeriodStartingEdge.Rising _
                               , CIPeriodMeasurementMethod.LowFrequencyOneCounter, 4, 4, CIPeriodUnits.Seconds)
                  uut1TimeStampTask.CIChannels.All.CounterTimebaseRate = 20000000.0
  
                  'Use exported change detect from 6534 board to take counter sample
                  uut1TimeStampTask.Timing.ConfigureImplicit(SampleQuantityMode.ContinuousSamples)
                  uut1TimeStampTask.CIChannels.All.PeriodTerminal = "/Dev5/PXI_trig0"
                  'uut1TimeStampTask.CIChannels.All.DuplicateCountPrevention = False
                  uut1TimeStampTask.CIChannels.All.DataTransferMechanism = CIDataTransferMechanism.Dma
  
                  ' Set timeout
                  'uut1TimeStampTask.Stream.Timeout = 20000
                  ' Verify the Task
                  uut1TimeStampTask.Control(TaskAction.Verify)
                  uut1TimeStampReader = New CounterReader(uut1TimeStampTask.Stream)
                  uut1TSCallback = New AsyncCallback(AddressOf uut1TimeStampCallback)
  
                  uut1TimeStampReader.SynchronizeCallbacks = False
                  uut1TimeStampReader.BeginReadMultiSampleDouble(-1, uut1TSCallback, uut1TimeStampTask)
                  myTSrunningTaskA = uut1TimeStampTask
  
              Catch exception As DaqException
                  ' Display Errors
                  MessageBox.Show(exception.Message)
                  uut1StopChangeDetection("C:\PT3771\TestResults\")
              End Try
          End If
      End Sub
  
      Private Sub uut1ChangeDetectCallback(ByVal result As IAsyncResult)
          Try
              'If runningTask Is ar.AsyncState Then
              If myCDrunningTaskA Is uut1ChangeDetectTask Then
                  ' Read the available data from the channels
                  Dim data As UInt32() = uut1ChangeDetectReader.EndReadMultiSamplePortUInt32(result)
  
                  Dim b As UInt32
                  For Each b In data
                      ' in TestData waveform Y axix is data, x axis is time 
  
                      uut1TestData.SetY(uut1ChangeDataIndex, b)
                      uut1ChangeDataIndex += 1
  
                  Next b
  
                  '' Set up a new callback
                  uut1ChangeDetectReader.BeginReadMultiSamplePortUInt32(-1, uut1CDCallback, uut1ChangeDetectTask)
              End If
          Catch exception As DaqException
              ' Display Errors
              MessageBox.Show(exception.Message)
              uut1StopChangeDetection("C:\PT3771\TestResults\")
          End Try
      End Sub 'DigitalCallback
  
      Private Sub uut1TimeStampCallback(ByVal result As IAsyncResult)
          Try
              'If runningTask Is ar.AsyncState Then
              If myTSrunningTaskA Is uut1TimeStampTask Then
                  ' Read the available data from the channels
                  Dim data2 As Double() = uut1TimeStampReader.EndReadMultiSampleDouble(result)
  
                  ' in TestData waveform Y axix is data, x axis is time
                  Dim b As Double
                  For Each b In data2
                      uut1TimeSum = uut1TimeSum + b
                      uut1TestData.SetX(uut1TimeStampIndex, uut1TimeSum)
                      uut1TimeStampIndex += 1
                  Next b
  
                  ' Set up a new callback
                  uut1TimeStampReader.BeginReadMultiSampleDouble(-1, uut1TSCallback, uut1TimeStampReader)
  
              End If
          Catch exception As DaqException
              ' Display Errors
              MessageBox.Show(exception.Message)
              uut1StopChangeDetection("C:\PT3771\TestResults\")
          End Try
      End Sub 'CounterCallback
  
      Public Sub uut1StopChangeDetection(ByVal location As String)
  
          Try
              If Not (myTSrunningTaskA Is Nothing) Then
                  uut1TimeStampTask.Dispose()
                  myTSrunningTaskA = Nothing
  
              End If
  
              If Not (myCDrunningTaskA Is Nothing) Then
                  uut1ChangeDetectTask.Dispose()
                  myCDrunningTaskA = Nothing
  
              End If
          Catch ex As Exception
              MessageBox.Show(ex.Message)
          End Try
  
          uut1TestData.UpdatePointCount()
          uut1TestData.SaveToDisk("C:\PT3771\TestResults\uut1TestWaveFile.csv")
          uut1TestData.SaveToDiskBinary("C:\PT3771\TestResults\uut1TestWaveFile")
      End Sub 'StopTask
  

  Joe,

  Last updated.  It seems that when the task.dispose is run, recalls seem to have called one last time.  I took the call to the stopUUT1ChangeDetect in the two recalls (so eliminate it would not enforce a second time), and no exception was thrown.

  Thanks for your help!  Although if you'd still answer my question on the PXI-6534 Digital input filtering, I'd appreciate it.

  Thanks again.

  Thad

• Listen to the changing value of the element that is passed under dynamic PL/SQL action

  Hello

  Version 4.2.6 apex

  I have a dynamic action that fires the PL/SQL. It is about 'change' DA for item P1_INPUT.

  It triggers the PL/SQL code

  :P0_ITEM_CONTROL := '{"Item":"#P2_SIF_MT_INFO","State":"success"}';
  

  Now, I want to hear this change (in question (P0_ITEM_CONTROL) in my external JS.

  $('#P0_ITEM_CONTROL').on('change', function() ....
  

  Of course, in that you can only listen for the changes that have been made by typing the entry itself, so I have to add another REAL action that fires the code JAVASCRIPT and trigger the change manually.

  $('#P0_ITEM_CONTROL').trigger('change');
  

  Which is cause of unnecessary bloat. Is there another way to trigger the change?

  
  First one that comes to mind is to create a DA who listen to change everything I want my JS to trigger. Then trigger manually there from there.

  Then come from your other thread, I take back what I said - I have messed up. I felt pretty sure the plsql execute did not have the change event, but I was wrong - I checked once again after the other thread. Since you're using two versions of jquery your question is exactly the same in this thread as what you experience with the popup lov! Use apex.jQuery to listen for the event changes and you will be fine, since the action of plsql execute trigger changes on 'elements to return'!

• Save the changes to and sharing the edited in LR jpg (no raw file)

  Hello! It is a struggle of snapper photo smartphone every day:

  
  

  Workflow: I took some photos with an iPhone (jpg) > > unloaded on my folder on a Mac structure > > added to my LR catalog > > developed their (culture, contrast changed etc.) > > I saved the file metadata.

  Problem: now, I would like to send pictures published as an attachment or open it in another client that is upload Photos of Google, but the jpg files seem to be intact. (I understand I should be working in the raw files where LR can save additional files with changes or I could export to jpg, but I don't always wear a good camera with me). Please can help you?

  Thank you!

  A.

  Hi amold.

  After working on the images in Lightroom, you need to export them anywhere on the system, so that you can see the changes you have performed on the images.

  Once you export you can download or send by e-mail or can be clouds.

  Kind regards

  ! Mohit

• Do you want to save the changes

  Hi all

  6i dev,

  I always get him 'do you want to save the changes you have done"message when I open my form and try to run the query.

  without to make anychanges.

  ??

  Thank you

  I found it, I'm assigning a value to an element in a trigger a time new form instance

  Thank you

• Do you want to save the changes you made

  Hi guys,.
  
  I need your help
  
  I ve a form that retrieve data on employees.
  
  There are 8 blocks in the form,
  
  I created a when trigger click mouse to display a LOV
  
  
  declare
  a Boolean value;
  Start
  a: = show_lov ('TEST');
  pc_execute; -calling a procedure
  END;
  
  but it gives you want to save the changes you have made?
  and I tried to delete it by setting the level of message system = 25
  but no advantage,
  
  And if I write:
  declare
  a Boolean value;
  Start
  a: = show_lov ('TEST');
  GO_BLOCK ('ORG_EMP_INCREMENT_HISTORY');
  pc_execute; -calling a procedure
  END;
  
  the message will disappear, but the query will run not all blocks
  
  
  ANY suggestions
  Best regards

  El-Hamdulellah

  Pls to mark your Question and the correct answer...

  and erase what was you meant to do?

  To help others with the same problem...

  Kind regards

  Abdetu...

• After query do you want 2 save the changes you made

  Hello
  
  If I run a query for a form master / detail and press an Exit_button
  
  A message will be displayed in the form: (do you want 2 save the changes you have made) or NOT
  
  I don't want to use:
  

  EXIT_FORM ("NOT OK");

  I have 2 codes in a post request
  

  BEGIN
  
  SELECT ITEM_ID ,ITEM_NAME
  INTO   :ITEM_ID ,:ITEM_NAME
  FROM    WH_ITEMS
  WHERE ITEM_SERIAL =:WH_T_ITEMS.ITEM_SERIAL ;
  
  EXCEPTION
  
    WHEN No_Data_Found THEN       NULL; 
  
   WHEN OTHERS THEN
            
            Message ('OTHERS' || SQLCODE || ' And ' || SQLERRM);
            Message ('OTHERS' || SQLCODE || ' And ' || SQLERRM);
            
       
  END;
  
  
  ---====================================
  
  
  
       
  BEGIN
  
  SELECT WH_STORES.STORE_NAME
  INTO   :WH_TRANSACTIONS.STORE_NAME
  FROM   WH_STORES
  WHERE  WH_STORES.STORE_ID =:WH_TRANSACTIONS.STORE_ID ;
  
  EXCEPTION
  
    WHEN No_Data_Found THEN      NULL;
    
          
   WHEN OTHERS THEN
            
            Message ('OTHERS' || SQLCODE || ' And ' || SQLERRM);
            Message ('OTHERS' || SQLCODE || ' And ' || SQLERRM);          
            
  END;
  
  --===============================================================

  But I want 2 know why?
  
  
  Kind regards
  
  Abdetu...

  Database is perhaps one of these columns

  IN: WH_ITEMS. UOM_ID,: WH_ITEMS. STP_UOM_NAME

  If Yes, delete the select statement.

  -Clément

• Do you want to save the changes that you did in fact 10g.

  Hai All,
  
  
  I am using oracle 10 g Forms. When I press the Search, he asks that you want to save the changes you have made.
  
  in fact this form has been converted to forms 6i. In forms 6i, his job very well, without asking, but in 10g, he asks.
  
  
  can someone tell how to remove this message?
  
  
  Thanks in advance.
  
  Kind regards
  
  Manu

  We therefore know what produces this message. Remove the initial allocation of the WHEN-CREATE-RECORD-Trigger one after another and see the message disappears. Then you have the field that is causing the problem. possible causes:
  a POST-CHANGE trigger on one of these elements, that updates another element in the block

  Possible solution:
  Use

  SET_ITEM_PROPERTY('BLOCK.THE_TROUBLEMAKING_ITEM', ITEM_IS_VALID, PROPERTY_TRUE);
  

  After the transfer

• I have Safari 9.1, El Capitan. The changes I make in the Safari preferences are not saved after that I close the program. There is no such thing as a Library/Preferences/Safari. What should do?

  I have Safari 9.1, El Capitan. The changes I make in the Safari preferences are not saved after that I close the program. There is no such thing as a Library/Preferences/Safari. What should do?

  I think you're looking in the root folder not your home folder.   Tilde ~ in front of the first slash indicates the folder.

  Try this...

  Quit Safari.

  Open a Finder window. In the Finder menu bar, click go > go to folder

  Type or copy paste the following text:

  ~/Library/preferences/com. Apple.Safari.plist

  Click OK, and then move the com.apple.Safari.plist file to the trash.

  Restart Safari to test.

• How is it that some machines running windows vista, when the router is updated or changed, they show "limited or local only" when you reconnect then wireless.

  problems with wireless Vista "local only".

  How is it that some machines running windows vista, when the router is updated or changed, they show "limited or local only" when you then reconnect wireless... nothing else was changed on those computers and other devices can connect ok?

  Hello

  Each router is assigned to the specific address (called IP address or IP address). And each router maintains its own database (called as base of router) to follow the networking devices communicate with him. When the router is changed, the particular router is unable to detect the device, especially the network card to communicate with the computer.  Since he does not have details of the database of network devices, communicate with him.

  • You are able to access the Internet?

  Try the steps mentioned below and check:

  Method 1:

  Step 1: Enable or disable a network adapter and then check:

  http://Windows.Microsoft.com/en-CA/Windows-Vista/enable-or-disable-a-network-adapter

  Step 2: Run Network Diagnostic tool and check:

  Network connection issues: http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Method 2: Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Reference links:

  Of network connectivity status incorrectly as 'Local' only on a Windows Server 2008 or Windows Vista-based: http://support.microsoft.com/kb/947041

  Setting up a wireless network: http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  Connection to wireless with Windows Vista: http://technet.microsoft.com/en-us/library/bb878035.aspx

  Hope it works.

• The change is triggered in VCenter via PowerCLI

  Good afternoon everyone, I am trying to automate the change of an alarm with VCenter 5 trigger.  Currently when users use 75% or more the storage on the local hard disk, I get an alarm for "Datastore Disk use.  I want to change the warning from 75% to 85% and the alert from 85% to 90%.  I have been using VSphere PowerCLI for many tasks for adding and configuring the hosts and their storage, networks, dns, etc...  So, I understand the basics.  I can't understand how to do something else then get the name of the alarm.  Any help would be appreciated.

  Hello, ThatMattGuy-

  You can change an element of the alarm using the API.  You should be able to use the following to update the caveat - and the percentages of trigger alert at 85% and 90% respectively by using:

  ## get the .NET View object for the Alarm of the given name$viewAlarmToUpdate = Get-View -Id (Get-AlarmDefinition -Name "Datastore usage on disk").Id
  
  ## copy the existing AlarmInfo item from the current alarm definition$specNewAlarmInfo = $viewAlarmToUpdate.Info
  
  ## update the two desired properties on the MetricAlarmExpression (http://pubs.vmware.com/vsphere-50/index.jsp?topic=/com.vmware.wssdk.apiref.doc_50/vim.alarm.MetricAlarmExpression.html)$specNewAlarmInfo.Expression.Expression[0].yellow = 8500$specNewAlarmInfo.Expression.Expression[0].red = 9000
  
  ## reconfigure the alarm with the new threshold values$viewAlarmToUpdate.ReconfigureAlarm($specNewAlarmInfo)
  

  It takes AlarmInfo to the definition of existing alarm, updates the two values you mentioned and the uses of the method ReconfigureAlarm() of the alarm.

  And, then to display the new values, you check the definition of alarm triggers tab in vCenter, updating the view on the object data and echoing, as:

  ## update the View object$viewAlarmToUpdate.UpdateViewData("Info")## display new values for the alarm$viewAlarmToUpdate.Info.Expression.Expression[0]
  

  How do I?

• How to detect the change of focus between applications

  LV2013, Win7

  I have a long operation that so I have to.  Let's call it a "scan".

  I start to a particular folder on the disc and look for files within this framework and in those folders, etc.  I am looking for a particular file (*.lvlibp).  When I find one, I need to open it, look for particular screw it contains and check them for executability (broken) and fix the ConnPane, etc.  I put all the elements of qualifications in a menu (in the menu bar) as the submenus and submenus, etc..

  I do the scan in a separate thread, is not as if I'm blocking anything either, but it takes away CPU time that I would rather not use.

  If I do the scan only once, then the user can go to the Explorer, move a file in place, or rename a folder and come back and I miss the changes.

  Right now, I do whenever the single window happens (the one to which applies the menu).  But this means that round in my application of switching windows causes the scanner again, when there is no chance of a new file that appears.

  I would like to do this scan only when it is necessary, that I define as when I come back from another program (WIndows Explorer for example) this single window in my LabVIEW application.    I am ready to accept the fact that Scripts Windows or remote operations may sneak a file in there.  I don't mean to be bulletproof, just accommodating the more common scenarios.

  I don't want to make a kind of vote - the entire application is event-driven, and I want to keep it like that.

  So, how can I do this?

  If I look at the ACTIVATION VI event, it looks like it happens for ALL VI have activated.  I can attach a name-comparison and detect when the right window is coming forward, but again, simply because this window comes forward does not mean that I need to analyze.

  If I look at the event of ACTIVATION of the APP, it seems to be NEVER called. Even in an EXE file, the event seems never to occur.

  If I had an event to DISABLE the APP, I could set a flag when it happened, and the next time that the right window comes up, I could check the indicator and scan if necessary.

  But I did none of this case.

  Any ideas on how to do this?

  I think what I'll do is just watch the LAST MOD TIME of the parent folder.

  When I do a scan, I hide the LMT of the parent.

  Then, whenever the WINDOW is enabled, I'll check the LMT to the case against my hiding place.

  If it is different, then I scan again.

  Check the LMT takes about 50 uSec on my system, a relatively small price to pay.  And I do it when the window comes up to the top, so I will not notice every little detail of what you do, and I don't have to dig into .NET and assemblies and versions and unnecessary and other error messages.