Show route of fluid through pipes?

Similar Questions

• Cannot print through USB on Windows 8 router, but can through windows 7 and Vista

  Problem:

  I have a printer that works for both computers windows 7 and vista.  I have two computers windows 8 that do not work.
  Material:
  laptop Toshiba P50 brand new.
  Router Asus RT - N16 rooted with the TomatoUSB firmware.
  Printer/scanner color Samsung CLX-3180.
  Symptoms:
  I can get the printer to operate if connected directly via USB.  The new Samsung universal of the generic drivers work.
  Even the driver connected via TCP/IP causes the printer to beep and the power wheels to run but nothing comes out.  It looks like windows and the printer think print things.
  What I've tried so far:
  Uninstalled all printer drivers and ports.  Then reinstalled with fresh downloaded drivers.  I had to erase the registry because pilots and port were considered to be in use.
  I have disabled the firewall without result.

  I fixed it finally I think.

  Here's what I did.
  -Deleted all drivers in the system.  (1) remove the 2 devices) remove the driver through "(propriétés dele de serveur d'impression 3) delete all created ports through"the print server properties""
  -Download the new drivers. type 64-bit
  -printer installed using Samsung universal driver 2 and player USB connection as required by the manufacture.
  -installed the TCP/IP port using the TomatoUSB facility and former driver of windows 7.  (wrong system to not check to see if the printer is online)  The pilot was CLX-3180
  -Changed the driver properties Advanced printer to "Sansung Universal Driver 2" tab
  -Change of printer model for Samsung CLX-3180 in the printer - Options tab of the device properties.
  -L' printer select clicked the button when changing the port.  Don't know what it does.

• Photon: Car dock: routing of calls through car speakers turns off the phone mic?

  The title says it all, but I'll explain it. I bought the car dock and most of the time it looks cool, but there is a weird problem. I have the phone in the dock, and I have the audio cable from the charger to the auxiliary audio port of my car. When I try to make a call, the default speaker phone. In a noisy car environment, it is difficult to hear the other person of property. While the appeal goes, there is a "speaker" down button right on the phone that I can press on, which causes the audio to be routed via the speakers of the car being music, which is excellent. However, doing so causes both the person on the other line to be able to hear me, that makes no sense and is frankly very frustrating.

  I saw a couple of discussions on the issues, then I know that I'm not the only person to have had this experience, but I was not able to find a solution yet. Someone know if there is a solution, or if at least that there is a questions recognized by Motorola that could be fixed in the future? I guess it's a software issue any.

  Related discussions I've found:

  https://supportforums.Motorola.com/message/450352#450352 (reply 5)

  http://www.SprintUsers.com/Forum/archive/index.php/t-222513.html

  http://www.ramocafe.com/t318234.html

  Thank you

  Travis

  
  

• route all traffic through wrt openVpn 1900ac Server

  Hi all

  I have been on this issue for a while now and I did not see any thread here who could help me

  so, if this has been asked before I'm sorry...

  so my question are as follows:

  1 is it still possible to route all traffic to my (and get my public ip address of router) when it is connected to its virtual private network?

  2. If possible, please explain how.

  3. If is not possible with the can firmware OEM I use others supporting it?

  Thank you very much in advance

  Liran

  The firmware Linksys OpenVPN solution allows access to your network resources, but there is no Internet connection.

  Instead, you need to use OpenWRT firmware:

  http://wiki.OpenWrt.org/Toh/Linksys/wrt1900ac

• Dreamweaver freezes every morning, the console shows he's going through all my fonts?

  I'm on a mac, 10.9.2, with Dreamweaver CC (just what is the latest version). Every morning, after the start-up of Dreamweaver, I get about a minute or two, then it freezes. When I check the console log, I see that he's going through all of my fonts. I could publish the newspaper, but it's the same line over and over again, just with different fontnames (and unfortunately I don't maaaany fonts, but only a few of them are active):

  Note the performance of CoreText: customer called CTFontCreateWithName() using the name "Futura Light" and got with name 'FuturaBT-Light' PostScript fonts For optimal performance, use only PostScript names when calling this API.

  I have to admit that I don't know what that means, or what to do about it? CC other applications do not do that, only Dreamweaver (which shouldn't need to all fonts at first, with the exception of a few standard fonts-batteries). Anyway, usually I force - quit Dreamweaver and after that it works fine (as fine as Dreamweaver is usually the case, at least).

  A note on the side - here at the office, we use Universal Type Client of Extensis font management.

  Any help? Good ideas? Lucky guesses? ;-)

  Thank you

  We have checked the issue & looks like DW starts scanning all Extensis font at startup. We are studying it.

  In the meantime, it would be great if you can file a bug here. This will help us to give priority to it based on the number of requests from users.

• Large remote directory shows only the files through M?

  I use Dreamweaver MX 2004 to maintain my blog photo site.

  I have now approximately 3,500 photos on my site.  All photos are displayed in my local blog/images directory.

  But in my remote blog/images directory, I see that the pictures whose name begins with a number or one of the letters A to M.  It's as if Dreamweaver is mowing the half view files.

  Is there a way to tell him not to do it?

  I don't really want to split the directory into two, as then I have to change almost 2 000 image tags in the archives of the blog...

  Can you be sure it's DW and not the server? Have you tried other FTP programs to check? Quite possible the server limit the list for performance reasons. If so, the only way to be sure would be to split the files in separate directories, but I guesss what all your files beyond M are properly stored on the server, but does not.

  Mylenium

• SGE2010 customers have need to route through ASA 5505 & 3750

  Please see the included diagram.

  I need to move out of the 3750 client machines (and DHCP dependence on it) to the SGE2010 and absolutely to carry their internet traffic on through the external interface on the 5505. They must also be able to communicate in the internal environment to communicate with the production servers.

  Customers use actuellement.254 speaking through a silent dell in the 3750 switch, but I'm trying to migrate more slowly at la.253. I know that the 2010 will not DHCP, so I put a DHCP server on this switch now. The 5505 will not let me add a statement additional nameif on one of the other eth0 / x interfaces and I don't know if this has something to do with its capacity to act as a DHCP server (it is not an option in the ASDM) or he has ability to use internet gateway for customers in 2010. (Quick notes: The 5505 has a base license and is currently also site to 1 VPN connection.) As the 5520, then all its interfaces are used as well).

  I have statically assigned a customer moved with an adresse.253 and plugged into the 2010. I tried to give the 2010 both an adresse.4 and an adresse.253 but neither will allow me to ping on the 5505 addresses. The 2010 auto shows routes to two subnets and I put its default route to 253.1.

  The link between 2010 and the 3750 works - clients receive an adresse.254 of the 3750 and can get out to the internet via the 5505 and reach as well production servers.

  Why don't the 2010 see the 5505 as a gateway and allow customers to access the internet and also browse the 3750 when they need to access the production network?

  Now, the key to monkey. The reason why I am not "just connect both cheating and call a day is because I need also Always go out production servers / web applications via the interface of 5520 out outside/inside."

  I have such a package of wire trouble my head around why I can't get my customers moved to the new switch, I have not yet figured out how I'll do it again.

  Any help would be greatly appreciated.

  Scott

  Hi Scott,.

  OK, you'll have several IP networks connected on the SGE2010... that's fine that the switch can operate in Layer 3 mode.

  But the ASA5505 or the SGE2010 may only be granted to PC customers who are hooked the switch SGE2010 default gateway ports?

  If the SGE2010 is made the default gateway for the PC clients, the SGE2010 will go to layer 3 packets between appropriate subnets.

  (depending on whether you have added a few static routes inside your SGE2010)

  If the SAA is the gateway to the host PC, the ASA will route traffic accordingly.

  Best regards, Dave

• Cluster to C formatting style struct (Named pipes (Windows), OpenG implementation), best/correct approach?

  Greetings,

  I'm trying to send commands to 3rd party software, through pipes (Windows). The 3rd party software implements channels appointed for me this approach should be used. The 3rd party software returned data me through a separate set of named pipes. The pipe command accepts the following structure as input:

  typedef struct _pipe_CMD

  {

  WORD wCMD

  BYTE, Byte [2]

  } PIPE_CMD;

  An example of command shows the following values:

  wCMD = PIPE_CMD_EXAMPLE

  bYte [0] = 0 x 0001

  bYte [1] = 0

  Similarly, the exit pipe returns the following structure:

  typedef struct _PIPE_OUT_PUT

  {

  Double x

  Double y

  Double z

  } PIPE_OUT_PUT

  Question:

  What is the way to better/correct to imitate the structure of the typedef above in/to leave LabVIEW? Note that the channel named (OpenG application) for Windows takes string input (and similarly returns a string output).

  In the below attempts, I use a named pipe created by LabVIEW to test what can be read as I wrote my order for the named pipe. At this point, I was not able to get the 3 rd party software to respond to one of these commands, so I set the channel control named and listen to the output of the channel named, but I can type a channel named, successfully providing information (read only) house-keeping.

  Try 1: cast

  See Screenie 1. I threw each of the values in a string and it concatenate to send through named pipe. One of the problems here is that, in my view, type casting 0 creates a NULL character, who does not intend. The other problem is that I can not actually the 3rd party software to recognize that I sent an order!

  Attempt 2: Flatten the cluster chain

  Screenie see 2: I create a cluster and flatten it into a string to be sent by the named pipe. Here a number of characters represented is apparent in the output. Again, I fear that these are not representative of what I'm trying to send (wCmd and bYte [2]). Yet once, none charged with receipt of the 3rd party software that I sent an order.

  Thoughts:

  Should I change the channel named call library function node to accept clusters/structs to send what I want? This will break something else down the line? My "gibberish" (Screenie 3) return attempt, but same "gibberish" regardless of whether I used method 1 or 2 above, indicating that maybe I don't know how to read what is returned? (Could say "fool you, stop this")

  Thank you very much in advance for all your comments!

  Nicolai

  If your named pipes pass binary data - and it seems that they are - so don't expect to get an ASCII string. You will also need to send binary data. The wCMD is setting a WORD (2 bytes, or 16 bits) - so why do you send 15 bytes (PIPE_CMD_EXAMPLE length)? Moreover, since the data is an array of 2 elements of fixed size, it would be preferable to use a 2-element cluster for byte element, and not a picture of LabVIEW. Who's going to flatten properly, while a painting may not (depending on whether you set the flag to prepend to the size of the array). For data read back, you will need to unflatten it in a cluster of 3 values double precision, and it is possible that you will need to reverse the order of each element byte to get the correct values.

• Re-establish the connection to the router from Verizon Wireless

  I use IE6 on a portable Toshiiba with Windows XP. Our internet connection is via a Verizon Wireless router. Today, I can't run (Firefox or IE, by the way) - it does not detect the router. I am still able to connect to this router and internet through my MacBook Pro. How do I reconnect?

  Thank you.

  Hello

  1. What is the model of the router?

  2. you get any error message?

  3. don't you make changes to the computer before the show?

  Please follow the steps below.

  Method 1:

  Follow the steps from the link below.

  http://support.Microsoft.com/kb/870702

  Method 2:

  Follow the steps from the link below.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 3:

  Follow the steps from the links below.

  http://www22.Verizon.com/support/residential/Internet/fiosinternet/networking/setup/vzmi424/120519.htm#

  http://www22.Verizon.com/support/residential/Internet/fiosinternet/networking/setup/vzmi424/120527.htm

  See also the below mentioned link.

  http://www.Microsoft.com/athome/organization/wirelesssetup.aspx

• Cisco 892 NAT or routing support for VoIP

  I have some experience with Cisco switches, but not with routers. I'm trying to connect to a network of small intrenal at the port of FastEthernet8 and the WAN connected to Gigabit 0. I was able to configure DHCP for the internal network, but have been several days trying to find a way so that it can route all traffic through the WAN interface. I enclose below my current setup. Any help would be greatly appeciated.

  Current configuration: 1542 bytes
  !
  ! Last modification of the configuration to 00:15:51 UTC Sunday, August 24, 2014
  !
  version 15.0
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  no password encryption service
  !
  hostname sgivoip
  !
  boot-start-marker
  boot-end-marker
  !

  !
  No aaa new-model
  !
  !
  !
  !
  !
  IP source-route
  !
  !
  DHCP excluded-address IP 192.168.11.1 192.168.11.30
  !
  IP dhcp pool insideDHCP
  network 192.168.11.0 255.255.255.0
  router by default - 192.168.54.202
  DNS-server 167.206.112.138 167.206.7.4
  !
  !
  IP cef
  No ipv6 cef
  !
  !
  Authenticated MultiLink bundle-name Panel
  license udi pid CISCO892-K9 sn FGL1710231R
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  interface BRI0
  no ip address
  encapsulation hdlc
  Shutdown
  Multidrop ISDN endpoint
  ISDN point - to point-setup
  !
  !
  interface FastEthernet0
  !
  !
  interface FastEthernet1
  !
  !
  interface FastEthernet2
  Shutdown
  !
  !
  interface FastEthernet3
  Shutdown
  !
  !
  interface FastEthernet4
  Shutdown
  !
  !
  interface FastEthernet5
  Shutdown
  !
  !
  FastEthernet6 interface
  Shutdown
  !
  !
  interface FastEthernet7
  Shutdown
  !
  !
  interface FastEthernet8
  192.168.11.1 IP address 255.255.255.0
  full duplex
  automatic speed
  !
  !
  interface GigabitEthernet0
  DHCP IP address
  automatic duplex
  automatic speed
  !
  !
  interface Vlan1
  no ip address
  Shutdown
  !
  !
  IP forward-Protocol ND
  no ip address of the http server
  no ip http secure server
  !
  !
  !
  Dialer-list 1 ip protocol allow
  !
  !
  !
  !
  !
  !
  control plan
  !
  !
  !
  Line con 0
  line to 0
  line vty 0 4
  password *.
  opening of session
  !
  max-task-time 5000 Planner
  end

  I'm trying to figure out what makes the default entry of the 192.168.54.202 router in your DHCP pool? It usually comes to 192.168.11.1 or whatever you want your router to be. You need to add the following commands:

  interface F8

  IP nat inside

  interface G0

  NAT outside IP

  IP access-list standard NAT
  permit 192.168.11.0 0.0.0.255

  IP nat inside source list NAT interface G0 overload

  That should do it. If you have any other questions, I would recommend turning off your modem cable for a few minutes and then turn power on and then turn your router. To see if you have received an IP address, you can run a show ip interface brief and next to G0, you should see an external IP address.

• Route based on the ID of the virtual Port of departure

  Hi all

  Our client uses 'Route based on originating Virtual Port ID' to balance the load. Ayone know the ESX CLI command that shows the Virtual Machine <>= vmnic in this setting?

  There was a network problem in the customer environment, and I need to know what VM is linking to what (vmnic) uplink on the vswitch about? Or ESX does not show this explicit mapping through any tool?

  Thanks in advance.

  Dumlu

  Hello

  You can use esxtop, then hit low case n to change the network settings view. The 3rd column is the team of Teddy bear used by the virtual machine.

  Concerning

• flashing orange light on the 2008 model apple extreme router: address?

  My 2008 model Airport extreme router flashes a yellow light (not in green). Don't know how to fix this. This is a recent situation that continues, but does not affect no connectivity. Apple phone support is no longer can help they say it's "obsolete." but it works very well so far with flashing orange. Fear

  Open the Airport utility .app

  Airport utility Finder/Applications/Utilties/.app

  Click on your router and follow through

• can anyone help? I was told the other day one can route your incoming calls by those iMac is a reality?

  You can route your calls through your iMac please.

  If you have an iPhone and the phone and iMac are on the same WiFi network, audio incoming calls ring also via Facetime. You can also make outgoing calls using Facetime audio, which are then sent through your phone.

  That's all assuming that your operating system software is up to date on both devices.

• Run each VI but then show after a different action by the user

  Hello everyone,

  Sorry for my English in advance, you will see some errors probably: 3 I hope you understand anyway!

  Well, I am a beginner with labview and I work in a project on a system that may take measures of speed and strength.

  I have already created several VI:

  -One for speed

  -One for the force

  -One to make a report

  - and another at the choice of the type of the event.

  To summarize, the system having to control 2 types of measures: 24 mph and 28 mph and we must conform to this 2 different tests, obviously.

  The goal is:

  (1) see the first VI: type of measure and leave the choice to the user about 24 or 28 miles an hour and then Labview tell if it complies or not after the measurement.

  (2) display the VI that show measures speed for users;

  (3) display the VI that show measures of force;

  (4) and finally the last VI to carry out the report: I have integrated checkbox, etc..

  I would like to help users switch in this VI through the buttons "previous" or "next".

  I already write a 'hand '. If I run the main I had a first push button to go in a VI, and then I had a few 'next' buttons to display the next VI.

  But now I have different problem and even if I try to tackle him I really don't understand how...

  I will develop my problems:

  -The main problem is execution of these screws: the test is in the 0, 6s. So I would run each VI during the test, record data and only then to show different for users through these VI data as I explained before. For the moment, as I understand it, my work just run different Vi when I click on the 'Next' button and finally I don't want to do that.

  -Another problem is that, in fact, the user can navigate between different VI, but they are not yet delete when the user clicks 'next' Finally it does nothing actually. In the example, I want the user to look at the speed of data, write them on another file, and then click Next, sign before removal and next show, write to another file, click Next, etc... and I do not understand how it is possible...

  -Finally, I think it's possible, but the best thing for me would be that different data stored in a file, with everything which is located on the front panel. If I had a graph, I would like the graph in a file, etc. And in the example for my last VI, the report, thanks to the box. If something is check, writing to a file, and if it didn't ignore it.

  Sorry for this very long text and my bad English. I hope you understand my problem... I really need help-_ - I am disappointed, this is an important project for me (learning) and I tried a lot last week, but I ask you cause now I have really idea more...

  Thank you in advance,

  I join my project to receive a little help and explanations for this problem

  Hello

  With your architecture, it is obvious that you can't go back.

  I would be more appropriate to have a main.vi with a State for example machine calling Subvi through sub - VI supanel controls front themain.vi.

  Here are a few documents:
  http://digital.NI.com/public.nsf/allkb/D587067E18E0E70186256D44007B91FE

  http://zone.NI.com/reference/en-XX/help/371361J-01/lvhowto/loading_panel_in_subpanel/

  Adrien

• Combining a WD N900 router and a Linksys E1200

  Hello, I'm looking to expand my network. I bought a WD N900 router to replace my old Linksys E1200 (sorry linksys, not enough routher ports ).

  The internet connection comes from the modem in router N900 of WD. The WD N900 has the printer hooked to it and 3 NAS, a computer, and our magic jack. I ran 30 feet of cable network and routed the cable through the walls in the home section. I want to use my old Linksys E1200 to extend my network. I want to connect consoles (PS3, XBOX360) as well as the receiver of entertainment to my Linksys router.

  What is the best configuration? I'm looking to be able to access the NAS of WD N900 on our PS3 and Xbox360 for LAN - LAN looks like go. I tried to use the instructions on the Linksys website, but it doesn't seem to work. I have test the cable network, I ran across the walls, and it is a good signal. However when I plug the Linksys E1200 and connect my lap top Linksys E1200 to test it does not work.

  Any suggestions?

  Thank you

  Derek

  We must look on your router for hardware version. It is probably below.

  So when you tried LAN to LAN cascading, you disable the dhcp server on E1200?

  In any case... try the bridge mode if your firmware on the router supports bridge mode.