show Subvi .exe with a control

Similar Questions

• Problems with the help of control Edit Expression with tab control

  Hi all

  I am facing a strange problem when using Expression Edit Control with a tab control.

  When I put the Expression of the RichEdit controls on several tabs in a tab control, and when I run the application, the Expression Edit controls in a single tab are visible, others get invisible! I do NOTHING with them, but they do not simply show upward!

  I first faced this problem using Expr editing controls in Visual Studio c#. NET - with tab controls. For verification, I created a simple VI is LabVIEW to see if the problem is with my request / problem with Expression Edit controls in c#, etc. But voila!  A similar behavior in LabVIEW too! 

  I'm doing something wrong? OR do not do something right? Ask someone for help please ASAP!

  Thanks a ton in advance!

  DASI

  PS: Attached the VI here (LabVIEW 8.5) just download and run it, and you will see probably what I'm talking about!

  
  

• HP ProBook 6550 b / WL560AV: hppa_service.exe with 24% of the CPU

  I had some problems with my laptop and the process of troubleshooting, I downloaded and installed the HP Support Assistant.  Since the reboot after installation, the resource (resmon.exe) monitor showed HPPA_Service.exe at the top of the list for the use of the CPU, stable running, between 24% and 25%.

  I don't remember whether I gave him permission to install/run Power Assistant.  I don't think it worked before; If she she has never appeared as a problem anywhere so I was not aware!

  I don't want HPPA_Service.exe to 25% of my cycles use cpu full time.  What is the best way to make it stop?

  You can uninstall programs and features. If you want to reinstall you can find on your support page.

  Click on the link below, click on the "drivers and software", and then type your model number in the search box and then press ENTER, when loading the page select your operating system. Pilot your page will appear.

• LabVIEW with version control

  Hello

  I'm using LabVIEW with version control and only want to check the VI I need to change. If I changed a Subvi all screws directly or indrectly called this VI have recompiled and in order to save them, I need to check all screws are concerned. If I just extract the file, I need to change and to ignore the other screw recompiled the problem is if I use typedef ENUM and I want to still only got saved the VI automatically updated. Everyone runs on this problem?

  Thanks for the help!

  Kind regards

  Tom

  Tom,

  You can find what you need here: http://zone.ni.com/reference/en-XX/help/371361H-01/lvconcepts/saving_vis_compiled_code/

  Good luck

  Simon

• When I click on before sending a message, I get a screen 'Silverlight.Configuration.exe' with an allow / do not allow permission.

  Silverlight.Configuration.exe

  When I click on before sending a message, I get a screen 'Silverlight.Configuration.exe' with an allow / do not allow permission.  I am also warned that it is outside

  My protection.  Recently started to receive emails of some of my address book to stop sending advertisements.  (which I did anyway)

  What is happening and is involved with Silverlight, you have an idea?

  Hello

  . What mail client do you use?

  . When was the last time it was working fine?

  . What antivirus software you use in your system?

  . Did you do recent changes with the hardware or the software before the show?

  Method 1: A clean boot helps eliminate software conflicts. Visit the link to learn how to perform a clean boot: http://support.microsoft.com/kb/929135

  Note: once the troubleshooting is complete, reset the computer to start as usual.

  Method 2: Also uninstall and reinstall Silverlight and check if it helps:

  http://www.Microsoft.com/getSilverlight/get-started/install/uninstall-win.aspx

• Call Subvi exe

  Hello

  I call an exe with exec system block. I build this exe with Labview application builder. I need to open the front of some included subvi and I need to close them when they finish. The installation of the node subvi is configuered in this way: see the front when it is called. Close then initially closed. The first time I don't understand these subvi tab source file for the request of the manufacturer, so the application opens a pop up error. Can I include the source file tab: the program now works, but the screws are all open when the application starts. I don't like it. How could I answer exactly the behavior of VI in the exe file?

  Thank you

  Use nodes of property within the Subvi itself to open and close the front panel.

• bcmwltry.exe with / DLL initialization failed in windows xp

  I write a question on behalf of the client. Here's the problem of the customer:

  Playing Cityville Facebook my laptop crashes every time with the following problem, bcmwltry.exe with / DLL initialization failed. I don't know what it is or how to fix it?

  Hello
   
  ·         How long have you been faced with this problem?
  ·         Did you do changes on the computer before the show?
  ·         The problem happens only when playing Cityville Facebook?
   
  bcmwltry.exe is located in the C:\Windows\System32 folder, but is not a Microsoft System file. It's a Broadcom Corporation Wireless Network Tray Applet.
   
  Go to the Task Manager and stop the process, or it will consume memory and can cause your computer down.
  To complete the process in the Task Manager, follow these steps:
   
  a. press the keys Ctrl + Alt + Delete , and then select the Task Manager
  b. end of the process(bcmwltry.exe) running in the background
   
  You can also consult with Broadcom for additional help.
   
  Hope this information helps.

• Y at - it shows a bug with Hide and regions in 4.1.1.00.23?

  Hi all

  I tried to put a subregion Hide and Show area on a page. It is supposed to have a subregion of the form of each side (i.e. above and below).

  'View' of the region will show a "View only" control with a text and a picture inside.

  When I create the subregion Hide and Show area and add the control. everything seems to work as expected. However, when I then moves the subregion so that it is now between the subregions two form, 'view' is no longer something watch. The arrow changes, but that's all. It's as if the display control had ceased to exist. Move that the subregion any where from there does not change the behavior - show it only control is not displayed.

  Does anyone know if this is a known issue with 4.1.00.23? If so, is there a workaround?

  Thank you very much

  PT

  There seems not to be a bug and it seems not be a workaround.

  To recreate (at least in version 4.1.1), in the tree, create two subregions of form and add some controls. Create a subregion Hide and Show, and then add a control. If you run the page now, it should appear normal (i.e. the content in the skin and see the subregion will be visible when you click on show). Now, move the sub-region Hide and Show via drag and drop to between the two sub-regions form. If you run the page now, it should appear that there is no content in the skin and see the sub-region, despite the fact that, in the design view control is always there.

  See the bug itself, swap component mode. You will notice that even if the sequence of sub region numbers appear correct, the physical order of the sub regions will always be as they were when the subregion to hide and see the creation.

  Thus, it will look something like this:

  Shape 90 1 sub-region

  Subregion 230 form 2

  100 hide / display the subregion<-- in="" tree="" view,="" this="" will="" appear="" to="" be="" between="" form="" sub="" region="" 1="" and="" 2,="" in="" component="" view,="" it="" still="" appears="" at="" the="">

  To fix, go back to tree, drag hide and show of the subregion at the bottom, return to the view of the component, change hide and show of the subregion it and manually change the value of the sequence to a value between Sub regions 1 and 2 form. This will be:

  • go hide and show the sub-region to form Sub region 1 region 2 Sub form
  • the content of the Hide and Show under region now appears when you click to perform the operation to see the

  Hope this helps someone someday.

  PT

• How can I set up Gmail access with parental controls?

  I want my son to be able to access his account Gmail school and Google allow to complete the tasks for the school, but I can't seem to make it work with Parental controls.  Help, please!  (Preferably using Firefox.)

  Snow Leopard work well with GMAIL or Google might lead, if the computer in your signature is able to run the latest operating systems.  Before upgrading, read this tip

  Upgrading to 10.7 and don't forget Rosetta!

  Review the settings POP or IMAP for GMAIL if it's available as those who will work with the Apple Snow Leopard mail application.

• iPhone 6s 9.3.2 bluetooth doesn't always work only not with the control system of Mercedes

  Connection Bluetooth iPhone 6s with Mercedes control system does not work with version 9.3.2.

  (Last worked with 9.3).

  Hello..

  On your iPhone, tap settings > general > reset > reset all settings , and then restart your iPhone and then try Bluetooth with the control system of Mercedes.

  * No data is lost due to reset

• My iphone shows no service with all networks in Egypt also sometimes works and all this happened all of a sudden

  My iphone shows no service with all networks in Egypt also sometimes works and all this happened all of a sudden

  If your provider supports iPhone

  I'd look for an update to the carrier

  Settings - carrier - it will pop up if available

  And if there is none then speak to the carrier a replacement of the SIM card

• I'm a software tester for an internal application to my company. version 10.0.2 is not cmopatible with a few controls within our software. I need the download v9.0.1 whatever works with the controls. Where can I get?

  I'm a software tester for an internal application to my company. version 10.0.2 is not cmopatible with a few controls within our software. I need the download v9.0.1 whatever works with the controls. Where can I get?

  Well, if you need older versions of firefox you can find them on this site:
  - http://www.oldapps.com/firefox.php

  Best regards, G-Cloud.

• I want desperately to upgrade Firefox to version 10 of version 9, but whenever I try, I'm stuck with FF10 control addons for comparability and opening the homepage whenever I starts the browser.

  Windows 7 64 bit
  I want desperately to upgrade Firefox to version 10 of version 9, but whenever I try, I'm stuck with FF10 control addons for compatibility and opening the homepage whenever I starts the browser. I keep having to go back to version 9 to solve this problem.

  Sorry to be a while back! It tried unsuccessfully so this AM, gritted my teeth and deleted the FF programs folder and downloaded and installed FF 10.01. He was still struggling with the same problem. Went in the appdata folder and two files sessionstore.js there. Delete both, restarted the browser and no verification of the compatibility of the modules was done at first upward and the additional tab for welcome to FF was the opening is no longer all seems to work as it should and I did not lose any of my settings... Thanks for trying to help, and I hope that my solution helps someone else who could this experience in the future. Hoping that the next update will smoother!

• Satellite A300-1MS - I want a new BIOS with fan control

  Satellite A300 - 1 ms PSAG8E

  New BIOS with fan control, please.
  Thank you.

  Why Toshiba should make a new BIOS just for you?
  You have a problem with the fan?

  I put t know what OS you use, but you can change the method of cooling with Toshiba Power Saver. On both my Toshiba notebook, I use this tool and I like it.
  You can download the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

• Place that shows a bar with information about the amount of space different things - such as documents, music, pictures - resume.

  MacBook OSX 10.10,3

  Trying to figure out which takes up more space on my computer, someone showed me somewhere with a colored bar that shows how much space is taken by the documents, pictures, music, etc.  However, I didn't write that information down and now I can't find it.  I'd appreciate any help.

  Apple menu > about this Mac, and then click storage at the top of this window.

  However, I can't find this information useful stuff. You can try the search for large files, as described in http://osxdaily.com/2012/04/17/find-large-files-in-mac-os-x-search/