Shutdown (stop) missing when my pc is locked

Similar Questions

• Moto G4 - push notifications to stop functioning when the phone is idle / inactive

  Hello!

  I have a very annoying problem with my G4 bike purchased in the UK.

  Problem:

  My push notification comes to app and gmail to stop working when the phone is idle / inactive.

  When I use any application or when I put just the phone side push notifications work fine. They appear on the lock screen and beep.

  After a few minutes of not using the phone, the message to stop the spread. The sender indicates that a tick and the Moto G4 does not show notifications of type push until the phone is activated and unlocked. It is very annoying, because I already missed several attempts to call. This problem occurs with the Wifi or data plan. It is not a What'sApp of settings as it works very well for a while.

  Text messages and phone calls work well, just a data plan seems to go off when idling and never come back until unlocked (even then it takes a while). WiFi seems somehow to maintain a connection.

  I tried:

  • change What settings the sApp
  • disconnection/connection gmail account
  • remove the operating system of the device cache
  • disable the whats of ap battery saving options and all services appear to be relevant
  • WiFi seems somehow to keep the phone, but only data stops immediately, sending fn when idle
  • Restart in safe mode-> the same problem with meeting places. WiFi seems to work, data plan do not when idling

  Is this a known issue? Everyone knows the problem? To me, it seems that the camera seems to move from the internet and do not reactivate until this that unlocked.

  Any suggestion would be appreciated,

  Thank you!

  It seems to work now after clicking: 'Reset the settings App' in the top menu right in "parameters - apps-> gear-> battery optimization"!

  I haven't seen this solution anywhere else. I did the reset done only because I tried to disable optimization for almost all applications gradually. Without success, I clicked on 'Reset the settings App' and suddenly push notification for all work! Yes!

• Buttons stops responding when the event takes place

  I have two independent loops while in a VI. A while loop have a structure of the event. Buttons stop responding when the event takes place. Is there a solution for this problem.

  If you change the event you can see the 'Lock Front panel' option, if you uncheck the box that your PC will not be locked. But the wisest method does not perform any operation within the structure of the event.

• How to store Internet Explorer running when the screen is locked?

  Hello! So, I am owner of a Surface... Yes! Somehow...

  Because Microsoft App Store refuses to give us of Pandora, Youtube and other needed applications, the only way to use these pages is through Internet Explorer...

  (in my opinion, they do it so that someone using Internet Explorer)

  Now, ok, I did that! I search for the pages I need and have pin them at the beginning... Yes, problem solved?

  NO.... The screen, if you don't touch anything, or move the cursor or something, it locks itself automatically after a certain time... and the music and the videos just stop playing.

  Now, when I go to Internet Options, I can't find anything to fix this. Change PC settings or... In customize, where it says lock screen Apps, it gives you the opportunity to choose "the apps run in the background...". ", but Internet Explorer is not available for this.

  Now, someone, anyone... tell me how that's possible! How can I leave Pandora running or a 1 hour running YouTube video?

  What are my options?

  1. setting of the Tablet does not interrupt or stop using the internet explore when the screen is locked... Is it still possible?

  2. the Tablet for only auto setting not lock screen when I use some applications, such as Internet Explorer (again probably not possible)

  3 magically App Store makes it available Youtube Pandora Facebook and other necessary apps (pfffff apparently does not have to spend)

  4. all that have worked for you guys... Any Suggestions?

  These are just little things that have made use of my annoying and incompetent little practical Surface... It's sad when smartphones can be more useful and practical than my Surface... really really sad. This comes from someone who wants this work effective and favourable way to the customer.

  Thank you for reading, for help, for viewing and understanding, I hope that I'm not the only one with this problem!

  > How can I leave Pandora running or a 1 hour

  You could try PRadio in the store:

  PRadio is a third Pandora Internet Radio App for Windows 8 modern.  It allows users to listen to music from the Pandora recommendation service in the background.

  Kate

• Menu button is missing when the menu bar is not selected

  I'm using Firefox 41.0.1. The menu of Firefox in the upper left corner button is missing. I have disabled Menu bar button should be there. The menu bar works very well when I have the option checked, it's just the Firefox button is missing when I do not have the active menu bar.

  rdkill said

  ... I have disabled Menu bar button should be there. The menu bar works very well when I have the option checked, it's just the Firefox button is missing when I do not have the active menu bar.

  Showing a Firefox button when the menu bar is not selected, it was a feature in the four Firefox via Firefox 28 versions. With 29 Firefox and later versions, there is no Firefox button - there is nothing displayed when the menu bar is hidden.

• How can I get the message from thunderbird to stop coming when I opened my email?

  How can I get the message from thunderbird to stop coming when I opened my email?

  Press the alt key to make the call of menu bar
  Select Tools-Options-general
  Disabled the Start Page

• Recently upgraded to El Capitan, I had that problem for Mail stop unexpectedly when I saw some posts.  I followed the steps and was able to remove the trouble messages.   Now I can't restore the mail window message viewer component.

  Recently upgraded to El Capitan, I had that problem for Mail stop unexpectedly when I saw some posts.  I followed the steps and was able to remove the trouble messages.   Now I can't restore the mail window message viewer component.  When I try to catch the separator bar to go back to the left, only half of the small arrow icon and line appears, and it cannot be moved.   Can open the message by double clicking a message viewer.

  Hi there, alicefrompa!

  Thank you for using communities Support from Apple. From your post, I understand that you do not see the Message Viewer box which allows you to read your e-mails; only see you the Inbox that includes a brief overview of the message and are unable to restore access using the separator bars. I have had this happen to my own Mail app and am happy to let you know how I could fix!

  You are really on the right track - you want to roll your mouse over the divider between the Inbox and sections Message Viewer (which should now be on the extreme right edge of your mail window) and drag it to the left.  When you click on the receipt/Message Viewer box, the cursor turns into a line continuous black with a single arrow pointing to the left. When you see the cursor change, click with the left button of the mouse and (while holding down the mouse button in) drag the combination line / arrow to the left. You may need to drag a little further than before to get it. I had to hang mine almost completely in the middle of my Mail app before the display of the message box appeared.

  From there, you should be able to adjust the boxes to your widths you want as expected.

  If you are still not able to get the display of the messages visible after have try this, here are a few more things that you can do.

  1. Press command + O on your keyboard.
  2. Exit the Mail application, and then press on and hold the SHIFT key on your keyboard while reopening.
  3. Restart your Mac by selecting the menu  Apple in the upper right of your screen restart from the menu drop down.

  See you soon!

• My Macbook pro stops unexpectedly when approximately 30% of load.

  Hello

  I have a Macbook Pro late 2011 2.8 GHz, 4 GB of Ram (I've already ordered a kit of 8 GB and waiting for her) running on OSX El Capitan and recently changed the battery. It worked fine for the first two weeks. It loads normally and work fine without fresh power. A week ago, he began to stop himself when he was about 30% remaining battery. Indication of battery level lights flashing a couple of times, everything as he had no more battery left and 3 of them would be on again. If I tried to turn it on, it would go up to a certain point and then close itself again. It wouldn't light up to accused. I've read that it could be due to heat problems, but this occurs even when the fans are very low and the macbook is cold. I read this reset THAT SMC can solve the problem that I did that and still nothing. Can someone help me please?

  Thanks in advance.

  You can try running the AHT http://support.apple.com/kb/HT1509

  or take it for assessment.

  In or out of warranty you can get for free a 'Apple Service Diagnostics' OTC test

  Genius of booking http://www.apple.com/retail/geniusbar/

  Online https://getsupport.apple.com/GetproductgroupList.action

  check the warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

• my iphone 5 c screen stops working when I remove the case

  my iphone 5 c screen stops working when I remove the case

  Delete this case? Please explain what you ask a little more clear.

• Siri doesn't let me make a call when the phone is locked

  Siri doesn't let me make a phone call when my phone is locked. This is not the case with other phones in my family, but I can't find a setting to change. Any ideas?

  iPhone 6 with the latest iOS.

  Found the answer. It's under "Contact ID and password". Select "voice dialing".

• Portege Z830-10F - WLAN stops working when USB3.0 port is in use

  Hello

  On my Portege Z830-10F wireless stops working when I plug in a device on the USB 3 port. The wireless connection back upwards as soon as I remove the device.

  The problem occurs with any device I plug. I tested with disks external usb (usb 2 and usb 3), USB, a receiver wireless mouse and a printer/scanner.

  This problem only occurs when something is connected to the USB 3 port. The USB 2 ports on the rear do not have the problem.

  Port USB 3 itself works very well.

  Running windows 8 pro:
  * Wireless lan adapter: Qualcomm Atheros AR9200WB-1NG (version 10.0.0.75 driver)
  * USB port 3: Renesas USB 3.0 eXtensible Host Controller - 0096 (version 6.2.9200.16420 driver)

  I see that I ve got the latest drivers installed on the wireless LAN card and the usb host controller 3.

  The problem arises as well on windows 7 and windows 8 pro. I used the wizard to upgrade Toshiba upgrade of windows 7 to windows 8.

  This problem is present since I got this laptop. I ve already done a reinstall / recovery back to the original with windows configuration 7 but this doesn´t solve the problem.

  Does anyone else have this problem?

  Is there a way to fix this?

  Thank you!

  Hello

  To be honest, it's the first time I read on this issue.
  I have no idea how a device attached to the USB 3.0 port could affect the Wlan functionality.

  I assume its hardware fault and cela must be verified by a certified maker Toshiba.

• Why my GPS stopped suddenly when the location and the surroundings have not changed work?

  Why my GPS stopped suddenly when the location, a framework and the weather conditions have not changed work?

  Ros

  iPhone 4S OS 9.2.1

  Have you ever tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again? You won't lose data by doing this, but it can cure a few glitches.

  If this does not work and to rule out a software problem, set it back to factory settings, without using any data backup later. Test the phone and if the GPS works again, restore the backup.

  If the GPS does not work after the factory reset, it is a hardware problem, and Apple has to repair the phone if GPS can be fixed.

  In the case where it cannot be resolved, it could offer to replace the iPhone 4s, if you are willing to pay the price for the refurbished phone.

  Out of warranty repair service

  If your repair is not covered by Apple limited one-year AppleCare warranty + or AppleCare Protection Plan, your iPhone may be eligible for out-of-warranty service. For example, the liquid damage is not covered by the warranty, but may be eligible for out-of-warranty service. Some damage is not eligible, for example, if your device has been broken into several pieces. See the terms of repair of Apple and Conditions for more details.
  Read the terms of Apple repair

  Model	Out-of-warranty service fee	Battery service *
  iPhone 6 s more, iPhone 6 Plus	$329	$79 * available only if battery Apple diagnostic test failure
  iPhone iPhone 6s 6	$299
  iPhone 5, iPhone 5, iPhone 5	$269
  iPhone 4S	$199
  iPhone 4, iPhone 3GS, iPhone 3G	$149

  In addition, a $6.95 shipping charges if necessary. Fees are in US Dollars and exclude tax. The price is for the service through Apple. The final service charge we charge will be determined during the tests and may be less than the costs of service above. Pricing and terms vary for the service by an Apple authorized service provider.

  copied from: answer Service Center - iPhone

  
  

• Tecra S5 - fingerprint logon stopped working when I chanaged password

  I have a laptop Toshiba Tecra S5 and I use logon of fingerprints from the beginning.

  It stopped working when I have chanaged my password.
  Fingerprints are associated with the old password.

  I looked everywhere to find where to change it without success.

  Can someone point me in a right direction?

  Thanx

  Hello

  I think you should remove the old prints and need to configure this new.
  As far as I know, you can use the new password to connect.
  Then access the setting of Trusuite software, remove old prints and reconfigure using new digital prints.

  Theoretically, this should work.

• IE in Vista stops responding when I click on certain links on trusted sites

  Hi guys...

  Newbe here, lol,

  I have been looking at questions and answers on this forum for a while and found it very useful.
  But have not seen the question I would ask.

  If I may ask, my Windows Internet explorer stops responding when I click on certain links on this pension trust sites and updates to Tempo.
  Y at - it an easy solution.

  Help, please... Tracey

  What you mean to stop responding? Is there any message or simply no reaction at all?
  Have you noticed the same thing with some other browsers, such as Opera or Firefox?

• Yoga 2 pro 13'3 andro tab stops automatically when the screen is off & dosnt start evn battery is30 - 80%

  Hello

  I am facing this problem with Yoga 2 pro 13'3 pellets. It stops automatically when the screen is off and dosnt start until it is connected to the charger and press the same power button 30 to 80% battery. I don't know what it is. This happens every time

  No help for it?