Windows was not properly shut down

Similar Questions

• Bought my laptop in 3/08. Windows was not properly updated since 11/08. What can I do?

  I have a Toshiba laptop with Windows Vista Home Premium.  Just Ralized all updates have failed since November ' 08.

  Geek Squad told me I may have a virus, but analyses show that I have not. Do not know how to proceed. Thought about upgrading to Windows 7, but do not know if this could help or just have more problems.

  Maybe this will help now, we have reduced to a specific generic error-

  8000FFFF error code when you click on "Check for Updates" in the item of control panel Windows Update on a Windows Vista-based computer
  http://support.Microsoft.com/kb/946414

  http://taurarian.MVPs.org/WU_Vista/8000ffff.htm

• Windows was not shut down properly due to the system not responding do not. How do I fix this problem?

  When I start the laptop it says that windows is not properly and start in normal mode, safe mode, etc. when doing whatever it is above, it takes a while and then the screen make dark with the single mouse arrow and the laptop still does not start at the top. What to do to fix this problem?

  Hi lana02,
   
  -Remember to make changes to your computer after that this problem started to happen?
   
  Try the steps listed in the articles below and check if it helps you to fix the problem.
   
  Computer stops responding with a black screen when you start Windows XP
   
  Advanced Troubleshooting for General startup problems in Windows XP

• I keep getting emails telling me that if I do not answer with my name, password, Date of birth and the country or territory my Windows Live will be Shut Down

  I keep getting emails telling me that if I do not answer with my name, password, Date of birth and the country or territory my Windows Live will be Shut Down.  The person who sends me emails is also with MSN.  Everyone knows this?  Thanks for your help.

  Thank you for visiting the Microsoft answers community.

  The question you have posted is bound using Windows Live (Messenger) and would be better suited in the Center to help Windows Live Messenger. Please visit this link to find a community that will provide the support you want.

• I recently upgraded to Photoshop cc (2015) and Windows 10.  Now I get error messages - "the extension of com.adobe.preview.loader could not be loaded because it was not properly signed.  And when I try to open a dng file, it comes up with "cannot be compl

  I recently upgraded to Photoshop cc (2015) and Windows 10.  Now I get error messages - "the extension of com.adobe.preview.loader could not be loaded because it was not properly signed.

  When I try to open a dng file, it comes up with "could not complete your request because it is not the right type of doc.  Now I have "expansion of libraries could not be loaded because it was not properly signed.

  Any help would be greatly appreciated.  The program worked perfectly in the past.

  I contacted Support Adobe this morning, and they were able to solve the problem.  It was difficult.

• I was doing a winpeshl.exe.error when starting "the application was not properly initialze (0xc0000006). "Click to complete the application.

  I was doing a winpeshl.exe.error when starting "the application was not properly initialze (0xc0000006). "Click to complete the application" when I click ok it reboots. I can even recover the system, tried F8 startup, alt/F10, F2, launch repair system, Safe Mode and all the rest and still get the same error. System specs are Acer Aspire 5920, Intel T5450 processor, 2 GB ram, 160 GB of HDD, windows vista edition Home premium.  I am currently under the memory diagnostic tool windows, but it is said that the test results will be displayed again once you log in, but I can't log in to view them.  The test seems to be hanging around 21% so I don't know how well it will do

  Hi A1W1LL,

  A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure that may help you resolve the issue.

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot
  Step 2: Enable half the services
  Step 3: Determine whether the problem returns
  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns
  Step 6: Resolve the problem
  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  After reviewing the issue, put the computer into Normal mode.
  Uninstall or update the program that is causing the problem.

  If you are not able to boot to the desktop, you can try to restore your computer from WinRE.

  1. Insert the Windows Vista installation disc in the disc drive, and then start the computer.
  2. Press any key when the message "Press any key to boot from CD or DVD".
  3. Select a language, a time and currency, and a keyboard or input method, and then click Next.
  4. click on repair your computer.
  5. in the System Recovery Options dialog box, select the drive of your Windows installation and click Next
  6. in the System Recovery Options dialog box, click System Restore.
  7. follow the instructions in the wizard to restore system as usual and choose the appropriate restore point.
  8. click Finish to restore the system.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• SIEBEL_STRING_REFCOUNT variable of environment was not properly set

  Hi all
  I'm having a problem with the results of the EVT.
  One of the EVT gives explanation as verification failure below
  SIEBEL_STRING_REFCOUNT variable of environment was not properly set
  Explanation:
  Make sure you that the Siebel "SIEBEL_STRING_REFCOUNT" environment variable which controls reuse memory consumed by the data string is not set.
  
  
  I tried to check support.oracle.com and Setup Guide, and Performance tuning guide. But there is refrence to this parameter in terms of best pracirce or a recommendation.
  
  Have a clear population of this parameter.
  
  I use Siebel 8.0 on Windows platform and have used the standard EVT.ini as in Doc-ID 477105.1
  Thank you-

  Hello

  I think that SIEBEL_STRING_REFCOUNT is an environment variable set to solve the problems of siebel and evt is to make sure, that it is not set. However, if you do not have this message or need additional information concerning this variable open a case in support.oracle.com asking for additional information.

  It will be useful,

  Wilson

• ORA-01079: ORACLE database was not properly created, operation canceled

  Hi all
  On Oracle Database 10g Enterprise Edition Release 10.2.0.1.0
  
  My problem is that I have to delete the database as the same is not created correctly.
  To do this, I get the error when I try to mount the database below.
  
  ORA-01079: ORACLE database was not properly created, operation canceled
  
  Also, when I started the database by specifying the file pfile, he threw out saying error
  ORA-00202: control file: ' D:\ORACLE_10G\DATABASE\CTL1SAMPLEDB. ORA'
  
  When I specified control_files clause in init.ora, that I was getting above error, so I tried to remove the same but still facing the same error.
  
  Can someone help me solve the problem...?
  
  Thank you

  ROCs Rossy says:
  Hi all
  On Oracle Database 10g Enterprise Edition Release 10.2.0.1.0

  My problem is that I have to delete the database as the same is not created correctly.
  To do this, I get the error when I try to mount the database below.

  ORA-01079: ORACLE database was not properly created, operation canceled

  Also, when I started the database by specifying the file pfile, he threw out saying error
  ORA-00202: control file: ' D:\ORACLE_10G\DATABASE\CTL1SAMPLEDB. ORA'

  When I specified control_files clause in init.ora, that I was getting above error, so I tried to remove the same but still facing the same error.

  Can someone help me solve the problem...?

  Thank you

  You should be able to do the following on the command line windows

  oradim -delete -sid sampledb
  

  then remove the D:\ORACLE_10G\DATABASE\ of the file system folder (assuming that there are only records your db in there.
  Finally, delete the D:\ORACLE_10G\ADMIN\SAMPLEDB folder structure assuming it exists.

  Niall Litchfield
  http://www.orawin.info

• I get the message when you set up a new user "a temporary user profile is loaded because Windows was not able to connect you with your local profile."

  Dear all,

  I have a Windows PC in my office. Because of some configuration issue, I deleted the domain user and tried to connect to the system with the same user credentials. It identify you with the credentials of the user, but I get a message saying: "a temporary user profile is loaded because Windows was not able to connect you with your local profile."
  This system is joined to the domain and the profile is an Active Directory user.
  Here are the details of the event ID:

  Details Product: Windows operating system Event ID: 1515 Source: Userenv Version: 5.2 Symbolic name: EVENT_PROFILE_DIR_BACKEDUP Message: Windows has backed up this user's profile. Windows will automatically try to use the saved profile the next time the user connects. Explanation A temporary user profile is loaded because Windows was unable to connect with your local profile. A possible cause of this is if your local profile has been corrupted or that you no longer have the correct privileges for profile records. Note: Any changes made to the temporary profile is lost once you disconnect. User action Search the profiles additional events in the event log for more information on the reason why this happened or contact the system administrator for further assistance.

  There is currently no article for this specific error Microsoft Knowledge Base or an event message. For more information on other technical support options, you can use to find answers online, see http://support.microsoft.com/default.aspx.

  Please, help me to create the same user profile in the system with formatting system.

  Hello

  I suggest you to refer to this link and check if it helps:

  http://support.Microsoft.com/kb/947215

  It will be useful.

• The Adobe Extension Builder 3 works to run a project in Photoshop CC2015.5 without getting "the extension could not be loaded because it was not properly signed.

  Hello world

  The Adobe Extension Builder 3 works to run a project in Photoshop CC2015.5 without getting "the extension could not be loaded because it was not properly signed"?

  OR

  Is there a way to convert my panels that works perfectly in CC2015 up to the CC2015.5version?

  I hope someone can give a solution, because everything that I could find were unanswered questions.

  Thank you all for your generous contribution

  Stone

  You have set the indicator of debugging for 2015.5 CC: HTML Panel advice #21: Photoshop CC 2015.5 survival guide | Photoshop, etc ?

• The com.adobe.preview.loader extension could not be loaded because it was not properly signed.

  I get a message "com.adobe.preview.loader couldn't be loaded because it was not properly signed" what should I do?

  Hello

  See this article: https://helpx.adobe.com/photoshop/kb/extension-not-properly-signed.html

  Concerning

  Jitendra

• Help! Windows 7 will not be shut down/IE 9 problems such as wells or to several questions

  Hello

  I recently bought a new computer company beginning July 2012. Since day 1, Windows 7 Professional 32 bit not stopped correctly. I contacted HP multple times now and done several tests of material. They say this isn't a hardware problem. They advise that this is a problem in Windows and 'flash' of my system again. Before having to do that, I want to see if I can fix this without doing something drastic that. In addition, IE9 won't work as well on numerous occasions.

  I tried following the steps in other posts in the community on windows does not stop but I can not even past the clean install. He refuses simply restart/stop. I don't know what else to do, but it's frustrating.

  I updated my drivers HP as well and still no help. So, where should I go from here? I really need help and was shocked when I called the technical support to Windows and told me $ 99 has the right to fix. I just got this machine.

  Help, please!

  Thank you!

  Hello

  1. What brand / model of the computer?
  2. Have what troubleshooting measures you already tried?
  3. What happens when you try to shut down the computer? Is there a code error or message?
  4. What is the problem you are having with Internet Explorer 9?
  5. What do you mean by " " I cant even get past the clean install ' ?
  Try the methods provided and check.
  Method 1:
  Step 1:
  Start the computer in Mode safe and try to shut down the computer. Check out the link and follow the steps.
  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode
   
  Step 2:
  If you are able to stop mode without failure, perform a clean boot and check. Visit the link and follow the steps.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: once the diagnosis is made, follow step 7 of section to configure the computer to start the Normal start.
   
  Method 2:
  Look for errors in the event viewer.
  Open event viewer
  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer
  What are the information contained in the logs of the event (Event Viewer)?
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
   
  Method 3:
  Run performance and troubleshooting maintenance services system
  Open the troubleshooter of Performance
  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter
   
  Open the troubleshooting of System Maintenance Utility
  http://Windows.Microsoft.com/en-us/Windows7/open-the-system-maintenance-Troubleshooter
  Method 4:
  Disconnect all external devices and then try to shut down the computer. Check if any external device is causing the problem.
   
  Provide information more information by answering the questions so that we can better help you.
   
   

• Catastrophic customer service, Pavilion dv7 laptop STILL not repaired, shuts down randomly

  I've had a Pavilion dv7-6c95dx for over 6 months now and 1 week after I bought it, the laptop began to stop randomly. Firstly that it happened sometimes, usually once a week. When this problem occurred, I had to open the Task Manager, as well as SpeedFan and Manager tasks showed that everything worked well minus 50% of their capacity and SpeedFan has indicated that all systems (HARD drive, processor, motherboard) were running at 50 degrees Celsius (when I talked with a representative from HP on the phone, they told me that their products are supposed to operate at the maximum temperature is 90 degrees Celsius). I assumed it was a small issue, and, after a few months, to see if Windows 7 because of the problem, I installed Ubuntu (Linux). The same problem. I then reinstalled Windows 7, Ubuntu and even threw in a copy of Windows 8 for good measure and the same problem kept happening, but now it would be up to 4 TIMES a DAY. It would be closed (meaning that just go to a black screen, with the familiar sound of hard-stop which makes the fan) usually when I'm either: play a video game, who does not use a lot of RAM or CPU at all and is not graphic, or watch a YouTube video, usually HD and full screen. I'd hear the fan starts pumping a little (I knew it could get loud if necessary, but it's never told fort) and usually after a minute or two, he would have hard stop and then restart itself. So after 3 months of daily irritations, I decided to take my laptop to Geek Squad in the best buy, the store where I bought the unit. Geek Squad was no help: I sent the unit in 4 TIMES and first they said that the problem was "A defective HDD," they replaced, without success, and the other 3 times, they could not reproduce the problem, so that was the MONTH wholly wasted and worn out waiting for my computer back. I then asked to call HP, in the store, because when I called HP, I was not able to get a straight answer and HP, after AN HOUR of talking on the phone in the store, with a Geek Squad Manager, has reluctantly agreed to send me a box to pack up my computer and send it to HP service center. I received a call from HP after the computer and surprise, surprise, they could not reproduce the problem either! I asked about a policy of lemon no., and they said they didn't know what to do to that, of course, continue to send the laptop. When I got my laptop, I also got an email from HP asking me to rate my experience, and after I gave them the low ratings consistenly, so only I was able to speak to a case under the name of Kevin E Manager. He told me that I have to send the laptop in for "more extensive testing" (I'm not sure what this means, should not run them not testing the most extensive possible THE FIRST TIME AROUND)?) and when I asked about the policy of lemon no., he said after I send it, they will look at "other options." This time, the heat sink has been replaced, because for some reason, the laptop was running at 90 degrees Celsius, (which never happened in all my time to possess, to the best of my knowledge) but, of course, they were unable to reproduce the original problem. When I got my laptop, there was still the problem. When I called HP back, Kevin told me that at this point, they may send a representative to my home. 15 minutes before the arrival of the local representative, the closed laptop. I was relieved, because I thought it meant that I could reproduce the problem and show him. However, after waiting for an hour, with more applications running that generally required to shut down the computer, he WORKS PERFECTLY. As a matter of fact, the representative took the home unit for 3 days, and it worked perfectly. When she returned, of course, could do nothing about it. This device has been repaired 7 times now, and it is a shame. Kevin called me today ' today - in fact, it was after 1 week of waiting for a response from "24 to 48 hours." Moreover, off the 8 times that Kevin has promised to follow with me, it was only once I received a call during the response time promised 24-48 hours-another 7 times, it's me calling to him.

  Needless to say, I am extremely disappointed by the products and the HP customer service and would certainly not bought this device from them if I had known that I have would have been treated this way.

  Hello ImUnhappyWithHP,

  I will forward this thread to appropriate to review team. Someone must be in contact with you shortly regarding your question.

  Contact will be through the forums private message feature. You can check your private messages by clicking on the icon of the little envelope next to your name in the upper right corner, once you have connected.

• How can I get rid of windows does not properly close the message?

  Hello

  I am running a windows XP in my car, and every time that I turned off my computer of the car stops at the same time too.  This is due to my son and I will change it soon.  But in time average is there a way to make windows automatically choose "start windows normally"?  ( http://help.artaro.eu/images/winvista/vistastarterror01.jpg )

  Thank you

  Chen He

  It sounds like XP behave correctly and not making not a normal shutdown, you will see this message a lot.

  Maybe when you turn off your car, there is a transition of power that poses a problem for your computer...  I think that could also threaten or damage your hardware if it continued to occur.

  Until you get your fixed wiring, you can shut down the computer first, then turn off the car, or perhaps you could - unplug the computer from the car, turning off the car, shut down the computer.

  Until you get your fixed wiring, don' turn off the car while XP is running.

• Windows 7 won't Shut Down - continues to restart

  Hi all

  I can't get my new HP 6550 probook b to close. I can force by using the power button, but I can't stop using the Shut Down options on the screen. Can someone help me? When I force using the power button, I get a black screen that tells me that the computer has not been closed correctly and that I can't continue in safe mode. I need a solution because it drives me crazy!

  Hi Toronto1982,

  1. what happens when you try to shut down the computer?

  2. Since when are you facing this problem?

  Step 1

  Check if the problem occurs in safe mode.

  Start in safe mode.
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2

  Put your computer to boot in order to check if the problem is caused by any application.
  http://support.Microsoft.com/kb/929135

  Note: Please make sure that the computer is configured to start as usual by following step 7 of article.

  Start in normal mode and check the status.

  Step 3

  If the problem persists, check the event viewer.

  What are the information in event logs? (Event Viewer)
  b http://Windows.Microsoft.com/en-US/Windows-Vista/What-information-appears-in-event-logs-Event-Viewer

  REFERENCE:
  A computer that is running Windows 7 does not start when force you the computer to shut down
  http://support.Microsoft.com/kb/974719

  Bindu R - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think