sign hangs on the preparation of windows on windows 8.1

Similar Questions

• Satellite P300 with XP hangs at the screen "starting windows."

  I recently bought the Satellite P300 - 01 and had XP installed on it. I have fixed all the problems except for the question, that I'm going to start.

  When I turn on the laptop it loads everything flashes on the login screen and then hangs at 'starting windows' screen If I turn it off and then again about three times this issue finally arrives with the login screen. There was an ASP.NET account, and after the BIOS update that he disappeared, but the problem is still there? Any comments would be greatly appreciated.

  Thank you

  > There was an ASP.NET account, and he disappeared after the update of the BIOS
  The whole story is really strange

  I put t know how you installed XP on this laptop and why an ASP.NET account was created or exist, but in your case I would recommend doing so again.
  Then install all service packs, hotfixes and patches of the XP!

  Simply show words on XP on P300.
  A friend of mine has installed XP on a P300 yesterday too and the XP works well
  Everything works fine!

• Virtual Appliance update hangs during the preparation stage of files

  It is a continuation of my attempt to upgrade this thread saga:

  

  I've been trying again to do the upgrade, but the last 2 attempts seem to stagnate outside in the scene where he says that she prepares the files, and mail is still delivered. Since it's the virtual appliance, I could make a snapshot before starting and then go back to it in case of failure, which I am very happy for.

  This same problem happened to me on an update there are several years and Sonicwall tech support person he restarted just for me and then again upgrade - if I remember correctly - and then it worked. But when I tried, he got always outside. Is there anything else I can try?

  Make sure you use the correct upgrade file.

  The one that ends with. sh.

  Make sure also that he has not been renamed or had added nothing to it when downloaded and saved.

  The other that you download is for the deployment of a new virtual appliance.

  If you are very low on disk space, you may need to look at what is using that space.

  What is the junkbox?

  You probably want to prosecute and to talk to a technician.

  If there is not enough free space, the upgrade process may fail.

• Windows hangs at the splash screen (Windows startup screen), but works after restart

  I encountered this problem recently. On my Dell XPS M1530, when I turn on the laptop after a few hours, windows gets stuck at the start-up screen. I restart it once, and once again, it gets stuck on the start screen. But when I restart twice, windows starts successfully.

  When I turned off the computer and launch until it is physically hot, then windows starts successfully. But when I start the computer after his East become physically cold to room temperature, again the problem starts. I've never seen this kind of problem never or don't want to believe that windows or equipment can be affected by temperatures. It's almost as if windows starts up when the laptop is pretty hot.

  Anyone any idea what the problem is?

  Hello

  As you experience the same in Safe Mode, it may be the case of a faulty hardware or a damaged system file. However, we can run a Microsoft Fix itfirst to troubleshoot your Windows system performance and restart your device after execution of this. If the problem persists, we can also try the System File Checker tool to repair missing or corrupted system files. After execution of the auditor of the files System tool you will see the result, if there is a file system damaged the cause of the problem.

  If there is no corrupted files, it is indeed a defective hardware, and we ask you to contact your manufacturer to resolve the problem suggests. Please see this link for manufacturer support website for your.

  Note: you must enter correctly on your desktop to run the Microsoft it Fix tool and auditor of the files System tool.

  Best regards

  MICAH Bat

  * If this post responds to your query, please click Mark As response *

• Computer hangs during the update of Windows 8

  My laptop recently posted a message saying that he would automatically restart in 15 minutes to install a Windows Update.  After 15 minutes, it restarts and a screen will appear that says "Configuring Windows updates.  Do not turn off your computer. "He started to install, then stalled to the point 13%.  I rebooted several times, and it keeps the timing at this point.  I can't go past this screen for something else, so I have no use of the computer right now.  Y at - it a fix for this problem?  Thank you.

  Hi Rebannle,

  What is the brand and model of your computer?

  This problem may be caused for the following reasons:

  Conflicts of hardware/software.

  System files are corrupt.

  You can see the steps from the following thread that was answered by MikeSimmonsUK on November 7, 2012, that will help us solve the problem.

  Windows 8 updates stuck at 13%. (NOTE: laptop HP - audio drivers)

  If the problem persists, you can also see the steps in the following Microsoft article: Windows Update crashes when installing updates in Windows 8, Windows 7, or Windows Vista

  Notes:

  When you perform the System Restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  When running at Refresh: the applications that came with your PC or you installed on Windows Store will be reinstalled, but all the apps you have installed other Web sites and DVD is deleted. Windows puts a list of applications on your desktop after you refresh your PC.

  Keep us informed on the status of the issue.

• I am trying to install windows xp from the disk, but it hangs during the installation process. no error code. It just hangs. What is the cause and what is the solution?

  I am trying to install windows xp from the disk, but it hangs during the installation process. no error code. It just hangs. What is the cause and what is the solution?

  Hello

  1. at what stage of the installation, the computer crashes?

  2. what operating system was installed on your computer prior to this?

  If you have the similar problem as mentioned in these links, you can follow these links and check if the problem persists:

  Windows XP Setup stops responding (hangs) during the "Preparing Installation" phase

  Windows XP does not meet the Message "Setup starts Windows XP"

  Hope the helps of information.

• Install Windows recovery disk 8 in virtualbox hangs on the splash screen

  Hello Lenovo community,

  When I try to install the copy of Windows 8 I got with my Lenovo S440 in a virtual machine environment

  the installation hangs on windows startup screen. I've never seen a Windows 8 installation

  procedure before, so I booted my laptop from the installation media to check if it is corrupted.

  It works very well. A loading circle dot is displayed the logo after a few seconds and that after quiet

  some time the wizard of lenovo is shown... so there must be a problem with the virtual machine.

  I have attached a screenshot to show you where it crashes.

  It would be great help ! Thanks in advance!

  Link to photo

  Note of the moderator; image (s) converted into programming on display images in Forums

  Hello

  I think that reinstall drive wouldn't work on a virtualized machine, only directly on the Lenovo hardware, in order to prevent the copy of Windows, more whatever additional licensed software is on the media, to be pirated.

  My best advice would be to insert a blank HARD drive in Lenovo ThinkPad S440, use the recovery media, produce an installation complete on the HARD drive and then run a program to convert the HARD physical disk to a virtual machine, as Microsoft Sysinternals Disk2VHD.

  Kind regards

  Aryeh Goretsky

• X 1 carbon 2014 windows 7 hangs after the main power connection

  Nice day

  After the Polish Lenovo call center refuses to help me ask you to help. For about a week now, my X 1 carbon 2014 hangs after connection to the power supply. It's so irritating. I think, I only installed the updates regular windows 7 and the update of the BIOS via the lenovo update tool.

  The Polish Lenovo Support Center came with the excellent range of system solution. I really hope that you would be able to help more effectively at the same time.

  Thank you!

  Pawel

  
  

• HANGING AT THE WINDOW LIVE HOME PAGE! CAN'T SEE THE INBOX. WHAT SHOULD DO?

  After signing to windows live hotmail, the next page shows the homepage live window, where, in space on the right, we are waiting for the loading

  advertising at the end, before we begin to click on the Inbox. I noticed that in the space on the right where loading... was not fact all the,.

  so when I click on the Inbox, there is no respone.

  Thank you

  You posted on a forum for users of Microsoft Security Essentials.

  Your problem is with e-mail.

  HotMail has its own Forums, so you can ask your questions there.

  Windows Live Solution Center - HotMail - HotMail Forums Solutions

  http://windowslivehelp.com/

  Hotmail - Forums

  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions

  http://windowslivehelp.com/solutions.aspx?ProductID=1

  How to contact Windows Live Hotmail Support

  http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  Windows Live Hotmail Top issues and Support information

  http://support.Microsoft.com/kb/316659/en-us

  Compromised account - access unauthorized account - how to recover your account

  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  Hotmail hacked? Take these steps

  http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspx

• I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00. All options are not enabled. How can I change the time, updates are made? __

  I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00.  All options are not enabled.  How can I change the time that updates are made?

  Hi imoffshore,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         When was the last time it worked?

  ·         Remember to make changes to the computer recently?

  ·         You have security software installed on the computer?

  ·         You get the error message?

  When you open the tab automatic updates in the control panel or My Computer property sheet, all options of configuration of the automatic updates may be grayed out. This happens due to one of the following reasons:

  1. You are not logged as administrator (or equivalent)
  2. Strategy of automatic updates is enabled
  3. Automatic updates (and Windows Update) access is blocked by group policy

  The options available for automatic updates.

  You must make some changes in the windows registry.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  • Click Start, run and type REGEDIT to . EXE
  • Go to this location:

  HKEY_LOCAL_MACHINE-SOFTWARE-policies-Microsoft-Windows------WindowsUpdate------AU

  • In the right pane, delete the two values AUOptions and NoAutoUpdate
  • Go to this location:

  HKEY_CURRENT_USER-SOFTWARE-Microsoft-Windows-CurrentVersion------policies------WindowsUpdate

  • In the right pane, delete the DisableWindowsUpdateAccess value

  Using the Group Policy Editor - for Windows XP Professional

  • Click Start, run and type gpedit.msc
  • Navigate to the following location:

  => Configuration of the computer
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, double-click Configure automatic updates and set it to not configured
  • Next, go to this location:

  => User configuration
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, set to remove access to all Windows Update features on not configured

  Change how Windows installs or notifies you of updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-how-Windows-installs-or-notifies-you-about-updates

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Mini210-1041NR hangs on the Windows Xp loading screen

  my HP Mini210-1041NR hangs on the Windows Xp loading screen, the laod reached late bar, then he stops and restarts, can someone hlp me difficulty this please

  Hello:

  Please read this guide and read the news on the chipset intel.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/TD-p/114120

  Tip: Your model has the NM10 chipset.

  Paul

• Sign tiny function on the calculator of Windows fonts (. + - *)

  The Windows Calculator, function keys fonts are almost microscopic.  The sign is not much bigger than the tiny period. Similarly for the + and * function of signs.  For 20 years, I had to squint and peer closely at the screen when you use the Windows calculator.  Is this usability flaw ever going to set?  If it has been fixed in Windows 7?  Is there a huge technical reason why signs of the function cannot be larger than the main fonts numbers?

  In Windows 7, it's the same thing.  I guess the assumption is that one should know where the keys are.  Would be nice if you could change the font size.  There is this...

  http://www.gHacks.NET/2007/11/04/increase-the-size-of-Windows-Calculator/

  .. but I have never tried.

  --
  Gina Whipp
  Microsoft MVP (access)

  Please post all responses on the forum where everyone can enjoy.

• Windows hangs on the last blue screen and is unable to stop.

  During the shutdown process, after downloading updated successfully, the is Windows XP hangs on the last blue screen "shutdown of windows.  For now I just have to unplug it from the power supply to the stop card.  I run a maintenance program, but it does not solve this problem.

  Hi, Tinker,

  1. you receive messages or error codes?

  2 have. what maintenance program you tried running?

  Method 1:

  You can visit the computer manufacturer and try updating the chipset and video card drivers.

  How to manage devices in Windows XP

  Method 2:

  You can also check if the problem occurs in safe mode.

  To start the computer in safe mode

  A description of the options to start in Windows XP Mode

  You can also read the following article and check if it helps

  Advanced Troubleshooting for shutdown problems in Windows XP

  You can check in the event viewer to see if there are newspapers in events related to the issue.

  For more information, you can consult the following article:

  Procedure to view and manage event logs in Event Viewer in Windows XP

• Windows XP hangs at the splash screen (logo). Dim screen when hooked.

  I do have problems starting XP 2 on two different hard drives.  I'm more concerned at this time is described in the title.  I bought a new hard drive (Western Digital Caviar Blue WD3200AAKS 320) to back up the data on my old hard drive, due to the other XP startup problem and installed Windows XP Home edition, as well as my motherboard drivers, etc..  It starts very well, at first, but then started a curtain to the start screen (and the splash screen is very low in this case).  I tried to remove some additional applications provided with the motherboard, no luck.  I tried to reinstall XP several times, and who has not helped.  I tried to update my video driver, running chkdsk, running Windows Memory Diagnostic (which does no problem), cleaning the registry with Advanced System Care Pro, unplug all USB devices and network cable, etc.  He continues to hang at the splash screen (weakly).  When I try to start in safe mode, it hangs at "mup.sys.  So far, I'm able to get XP to start by repeated restart later...  I searched the web to find a solution for this and have found no definitive answer.  I just ordered another new hard drive and Windows 7.  I intend to dual boot with windows 7 the new HD and XP on the current disc (assuming that this problem can be solved!).

  My other problem is on my old sister Hitachi 160 GB IDE hard drive.  A few months, our PC stop working.  After buying a new power supply (Corsair TX650w) and determine that he was not a power supply problem, I bought a new motherboard (GA-MA785GT-UD3H), (AMD Phenom II X 2 555 3.2 Ghz) CPU, RAM (CORSAIR XMS3 DHX 4 GB (2 x 2 GB) 240 - Pin DDR3 SDRAM DDR3 1333), and some new fans (old system died due to heat issues).  Once I had it put in place and I tried to boot XP from my old drive, he just went in a "boot loop".  He gets to the XP splash screen, goes black and restarts, again and again.  I tried setting the installation of XP with XP CD 3 or 4 times, without success.  This question is not as big of a deal to me now, because I now have the new hard drive with the new number to start XP (intermittent).  My main goal with the old hard drive was to save all my data.  That is, life turns on if I can't start XP on this drive (the one with the boot loop).

  Thank you for your time!

  The BIOS update has * seems * solved the problem!  I rebooted it 4 or 5 times, but also completely off the PC and it starts today.  Did not repeat the problem so far!

  It is a great place to come to answer my own questions!  Bookmark!

• I can't sign into windows live messenger, I get the message that windows live messnger is unavailable currently try again later and also I get the error code 80048820, can someone help me solve this problem. __

  I can't sign into windows live messenger, I get the message that windows live messnger is unavailable currently try again later and also I get the error code 80048820, can someone help me solve this problem.

  Hello jabeena, welcome.

  This section would apply in fact to the Windows Live programs, but we'll see what we can do to help out you.

  I recommend to try this first:

  1. disable any antivirus software or security, you have running on your computer. Looking for software to disable that contains a firewall.

  2. click on START
  3. Type "cmd" (without the quotes). Right-click on the result at the top of the menu START and select 'run as administrator '.
  4 type the following and press enter

  Regsvr32 softpub.dll wintrust.dll initpki.dll

  5. then type the following command and press enter

  netsh winsock reset

  6. restart your computer and see what happens.

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.