My OS gives problem that it is widows vista Home premium service pack 2

Similar Questions

• problem installing vista Home premium service pack 2

  I recently had a hardware crash, had to reinstall the operating system, i.e. Windows vista Home premium with service pack 1 (32-bit) who came wth the system. Later, I tried to update the operating system, but the thrown error was 'WindowsUpdate_80080005 '. I tried to download vista sp2 on microsoft site, and when I tried to install it, it threw an error mentioning as casastrophic error E_unexpected(0*8000ffff). How can I update my windows vista Home premium with Service Pack 2?

  I tried the options listed below
  • tried to update via windows update, it threw an error "WindowsUpdate_80080005."
  • tried to install it by downloading the sp2, it threw an error E_unexpected(0*8000ffff)

  Please answer

  BR
  David

  Hi, DavidDarse,

  0 x 80080005 indicates that there is a problem of access denied with the Background Intelligent Transfer Service (BITS) security descriptors.

  1. don't you make changes on the computer before the show?
  2. When you receive this error message?
  3 update you trying to do?

  Method 1: Run that fix the following:

  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

  Method 2:
  If the problem persists, then try to set up your computer in a clean boot state and then try to install the update to windows.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After the adventures of shooting set the computer to start as usual by performing step 7 above of the Knowledge Base article.

  Download the file and save it to your desktop

  Close all windows and applications

  Right-click on the file and select run as administrator to run the installation process.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  WARNING: Microsoft does not recommend interrupting the CHKDSK process. Microsoft does not guarantee the integrity of the disk if the CHKDSK program is interrupted. For security, you can back up your data before using check disk drive.

  Have you tried a system restore before the second error?

  http://support.Microsoft.com/kb/2732500

  FixIt MS: 0x80000FFFF error Code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/946414

• Windows Update that affect Internet for Vista Home Premium and Windows 7 connectivity

  Hi, I have two machines in one desktop running Vista Home Premium and a laptop running under windows 7.

  After you apply the Windows updates a few days ago, I was not able to get internet connectivity using my Vista desktop computer.

  I was able to get a wireless on the Windows 7 machine, but to test the router I disabled wireless and tried a wired connection and it did not work.

  If I restore the installation of updates on both machines before the problem no longer exists, but it is clearly not a solution.

  Can someone please help, note that I have established that the router works and all the cables are OK. Thank you.

  I had a very similar experience. See the thread I posted and a solution I found:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/default-gateway-not-available-wired-and-wireless/55131516-C909-45CF-a98a-1e1134e61c26
  I'd be interested to know if the solution worked for you.
  -ONE

• Minor problems with Windows Defender in Vista Home Premium 64...

  Hi, I have a problem with the Defender, it seems that the program is updated, but when I open the 'color of program' Defender is orange instead of green.
  To search for "new definitions", he asks, I'm taking this step and then the color is orange, so there must be something wrong with the program.

  There is no error code.

  I use a HP Pavilion Elite with Vista Home Premium 64, and I use Microsoft Security Essentials such as AV and WF.

  Windows Update seems ok.

  Can someone fill me on this one please.
  best regards Carlo

  BTW; my native language is Dutch thanks for the effort...

  You do have a problem that you have to worry.

  Microsoft Security Essentials has its own integrated version of the defender and would normally disable Vista Defender.

  If you continue to have problems with the Vista Defender, turn it off:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/turn-Windows-Defender-on-or-off

  "Turn Windows Defender on or off"

  See you soon.

  Mick Murphy - Microsoft partner

• Display problem of links 2003 with Vista Home Premium 64-bit

  I just got a new office to replace my 6 1/2 years and am all migrant to the course. The new computer
  CyberPowerPC is: Intel I7 3.07 ghz, 6 GB triple channel ram, dual 500 GB HDs and Sapphire ATI HD 4870 1 video.
  I have migrated almost anything and almost everything works, including some games of the 1990s (original Unreal Tournament, etc.)
  A game that is driving my crazy is Links 2003 (v1.05). When I run the game, on the start screen, it says "3D Graphics".
  by ATI Radeon HD 4800 ". However, when I go into the graphics settings, the adapter box is empty. Using the drop down.
  I select my ATI Radeon 4800 Series card.  I can get the error message: "your ATI Radeon HD 4800 Series is not responding.
  Requirements minimum links. The software rendering engine will be used instead.  WHAT?  My old system uses an ATI X 1650
  video card that is not 1/4th the graphic power of my new card and it works fine.  I tried the latest version of the video driver
  from ATI (catalyst v9.6), which is what works on the old computer. I've also restored to v9.3, that does not work.
  I know it must be possible to run Links 2003 on Vista, because it is running on my laptop HP DV - 9550 T lan party, which is also
  Vista Home Premium SP2 running. The HP laptop with a Nvidia 8600 M GS video chipset, once again, no where near as
  powerful that my new card 1 GB ATI HD 4870.  What is going on?  Is there a registry hack that I can do to force the Links 2003
  to use my new card?  I contacted ATI/AMD and Sapphire, and they are both as baffled as I.  Help, please!
  cooncat at gmail point com

  I found a resolution.  There was a patch for this game released last year, June 2008. It's
  version 1.07.  After you apply the patch, the game works perfectly... in fact, better than
  never before, because there are new features.  Patch is available at:
  http://linkscorner.org/index.php

  Thanks for your attention

• Problems with the installation of Vista Home Premium on XP Professional

  Original title: Reinstall Vista Home Premium on Boot up

  Vista reinstall at startup

  My computer had Windows Vista Home Premium top. I installed XP Pro top. I want to reinstall Vista Home Premium back. When I restart my computer to reinstall, it doesn't reconise thd dist and continues to initialize. I tried Windows 7, not go. I tried XP Pro and it picks it up each time. I don't understand that. Why is it so?

  obmdaw

  Vista reinstall at startup

  My computer had Windows Vista Home Premium top. I installed XP Pro top. I want to reinstall Vista Home Premium back. When I restart my computer to reinstall, it doesn't reconise thd dist and continues to initialize. I tried Windows 7, not go. I tried XP Pro and it picks it up each time. I don't understand that. Why is it so?

  obmdaw

  It seems to me that You ' r try to boot from a DVD using a CD/RW drive. Vista and Windows 7 come on DVD, so your not being able to even read. On the otherhand is Winxp comes on CD

• Menu toolbar problem and start for windows vista Home premium 64-bit

  I've recently been tweaking and accidentally got rid of my explorer.exe file, (I think that I sent to my trash and maybe deleted it?). Once I realized that I just typed as a new task and it reappeared.  The problem I have is that since then I had no toolbar or start menu.  I tried to access it through the control panel that does not work; I tried Ctrl Esc, which does not work, I tried everything I can think of? What's weird, that's all my desktop icons are great, and for some reason if I have Ghost click my mouse in the lower right of the screen I open random programs usually on my toolbar, I can even drag on my desk.  I tried to find common ground, if my toolbar is there somewhere?, do to slide it back on my screen, but it was done without success.  Another thing is when I start my computer in safe mode, my toolbar appears with my Start menu icon?  Anyone know what may be the problem?  I am running windows vista family premium. operating system: 64-bit

  Hello

  Method 1:

  As you are able to see the toolbar in safemode, I suggest that you perform the clean boot to limit the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

  Method 2:

  I suggest check the link and try to perform the checking and scan SFC (System File Checker) if it helps.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Let us know if it helps.

• Widows Vista Home Premium, the updates will not be installed: Codes error 8004FF01 and 641

  Never had a problem of update until this week.

  Tuesday, may 8, 2012 update batch:

  KO 2690729
  KO 2691905
  KO 2604111
  KO 2604121
  KO 2656405

  These results in error codes

  8004FF01

  and

  641

  Run automated programs fixit, tried unsuccessfully Setup patches.  Lost, lost, lost.

  Hello

  ·         Are you looking for Services or Msconfig?

  ·         You get a specific message to Windows Installer?

  Thanks for the reply, you have tried the troubleshooting steps in the previous answer. If the steps described in the previous post, you can follow the steps mentioned below:

  Method 1:

  Run the system preparation tool to update from the link and if the problem occurs:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

  Method 2:

  If the previous step fails run the System File Checker tool to repair corrupt Windows file. Follow the steps in the link:

  http://support.Microsoft.com/kb/929833

• mspaint gives an error message on my Vista Home premium: "bitmap must be greater than one pixel.

  Paint freezes when I open the Paint program. How can I get paint to rework?

  Hi Jimme C,.

  1 did you changes to the computer before the show?
  2. when exactly you get the error message?

  Method 1
  I suggest you to scan SFC. Scan SFC will replace missing or damaged files.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7.
  http://support.Microsoft.com/kb/929833

  Method 2
  Check and clean the boot if all third-party programs are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: follow step 7 of section of boot KB929135 to the computer in normal mode.

  Method 3
  If the method above fail, then I suggest you to perform system restore to the date it was working fine.
  What is system restore?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

• Problem with activation in Windows Vista Home Premium

  My DELL PC came with windows xp media center pre installed and it also came with a disk to upgrade windows vista (Dell). It did not come with a product key or anything to the windows vista upgrade, it however came with a sticker with the product key for windows xp. Recently, my computer has a virus and it started again so I had to upgrade all over again. However, this time, the windows activation indicates that the product key is already in use. How can this be? Could someone tell me what I need to do. Thank you.

  You use the phone Activation, if necessary leave blank or talk, eventually meets a real person

• Impossible to Vista Home Basic to Vista Home Premium. Don't want to do a clean install. How to get around this problem?

  just bought an upgrade to Vista Home Premium with service pack 1.  I'm upgrading to Vista Home Basic.  The program tells me that the upgrade has been disabled and he wants to do me a clean install.  I really don't want to do a clean install.

  If your installed Vista Home Basic has recently installed Service Pack 2 > uninstall Vista Service Pack 2 for him >

  Do your upgrade to Home Premium Service Pack 1 > then redownload/reinstall Vista Service Pack 2 again.

  And make sure your Vista installed and the upgrade of Vista are the versions both either 32-bit or 64-bit, depending on what is your Vista Basic.

  Click Start > right click on computer > properties > Info is if your Vista is 32-bit or 64-bit Vista.

  See you soon. Mick Murphy - Microsoft partner

• Fromm Vista Home Premium (with many problems) I wish back to XP PRO. Where can I find the drivers? I think that the original XP disk contains the drivers.

  Vista Home Premium (with many problems), I wish to go back to XP PRO. Where can I find the drivers? I do not think that the original XP disc also contains the drivers!

  Some computers come with a disk drivers or Drivers and Utilities .  If yours does not, look for drivers on the web site of the manufacturer of the computer.

• I am trying to activate windows vista Home premium and I give you the key that I have on the cd cover, but not activity

  can I buy new window vista Home premium and install, but same problem not activated and again once I buy Windows vista ultimate and install but I am facing the same peoblem I have no why it happens to my camputer

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.

• I have an Aspire AM5640 - E5500A Q6660 Vista Home Premium that I bought in 2008.

  Acer Aspire M5640 AM5640 - E5500A Intel Desktop PC - Intel Core 2 Quad 2.4 GHz, 3 GB DDR2, 640GO SATA II, reader Blu-Ray/HD-DVD/DVD-RW, ATI Radeon HD3650, TV Tuner, Gigabit, Vista Home Premium

  That's as much detail about what I have that I could find.

  My question: is it possible to set up a 64-bit operating system by using the same product key for 32 bit WIndows Vista? Someone told me I could download the 64 bit version and install it. I let one of my data?

  The reason why I ask is that I cannot install a 3 to Seagate 3.5 inch HDD internal and integral functions of this player. I get the 1 750 GB and then maybe another 1.3 to using the software of computer management in Control Panel. I can format the full 3 TB using my laptop which is running Windows 7. If I can not install the 64-bit to 32-bit, Windows 7 could solve this problem?

  I download Win 7 64 bit and tried to install it on the hard drive 3 TB as a primary drive, but I've only had 760 GB of the disk and computer management couldn't give me the rest. It has been a frustrating month or groping - for most of the errors!

  The other problem is that the Windows 7 disk 3 TB lack a coprocessor driver. Can someone tell me where to find one? Update and the Windows 7 disk cannot install a.

  Thank you

  Lloyd

  Disclaimers and Information to forward:
  http://community.Acer.com/T5/community-KB/installing-a-different-operating-system/Ta-p/48739

  product key for 32 bit, you cannot install a 64 bit version of Windows Vista. The keys are different.

  The original recovery media will retrieve only the Acer operating system supplied with the system.

  Probably you are facing a problem with the architecture of the car, probably 4 blocks Ko, which are not recognized by the system.

  You can find additional information that help here on the Microsoft website:

  http://support.Microsoft.com/kb/2510009

• SynTPEnh.exe problem Vista Home premium.

  Hello

  I installed synaptics touchpad on vista Home premium 32-bit drivers Acer site. the unit works fine.

  Whenever windows starts up I now get a security alert dialog box indicating

  SynTPEnh.exe you want to run this file?

  Run or cancel.

  Why is this security box appear?

  I found a solution by clicking on properties of SynTPEnh.exe and clicking on unblock in safety at the bottom of the properties box.

  Would appreciate any information about why this error occurs

  Thank you.

  It's probably just a semantic software feature to provide a warning message to make sure that you want to activate the device, because it can replace any other input devices that you have installed (even if it is perhaps not the case in your situation).  I don't think it's really a 'mistake' but an intentional warning - especially now that it has been in the properties of the executable file and then installed with the software (and you did the right thing for the release of the security to solve the following message appears each time you start).  It wasn't a problem of Vista or a mistake.  I think it worked as it was supposed to work (but why would they do it is really beyond me).

  If you really want to learn more about why this security warning has been implemented, I suggest you cotact semantic Technical Support customer service or to the: http://www.synaptics.com/about/contact.  Unfortunately, they do not have a 900 number or specific technical support contact information that I could find - but there you cotact headquarters that you should be able to get these numbers, if available.  The only information of support they provide is http://www.synaptics.com/support and that doesn't give you any contact information (or he answered your question I read through it looking to see if the answer was there0.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.