Signature for table when calling operation mbean via java

Hi all

I try to call a method of an mbean and it takes the parameter as an array of string. I am able to set the parameter correctly but not able to define the signature of the method while invoking the java method. Can someone please advise?

Thank you

Frédéric

[code]

MBean method parameters

Object [] params = new Object [] {temporaryDir, false, listOfFiles, null, false, false, false, null, null};

signature of the method. Here I don't know how to define an array of java.lang.String for the third parameter. Audit of the bean by EM, it shows the type in the form 'table of java.lang.String.

String [] sigs = new String() {"java.lang.String", "java.lang.Boolean", "java.lang.String []","java.lang.String []", "java.lang.Boolean", "java.lang.Boolean", "java.lang.Boolean", "java.lang.String", "java.lang.String"};

Connection.Invoke (service, "exportMetadata", params, sigs);

[/ code]

Found the solution so close.

He served as follows:

boolean.class.getName ();

Tags: Fusion Middleware

Similar Questions

  • Leaking handles when calling C API Via "Call library function" (example attached)

    Hi all

    Thank you for any assistance you can give. I am a pretty good C programmer and a mediocre programmer LabVIEW so keep that in mind. I created a VI and C simple API to illustrate the issue (all sources included, built with Visual Studio 2005)

    I drove a DLL of the C API with LabVIEW as you can probably guess. There is a delicate part of the C API which requires some pointer math to work. This is the part that is leaking handles (seen in the Task Manager, below. Handles over 2 million and growing). The leak is only seen in LabVIEW and not when you call my API directly from C code (the code for the example C example is also attached)

    )

    The VI that illustrates the problem is quite simple.

    LabVIEW moves of the buffer returned by "card Seq Blk Rd.vi' autour and causing 'Card Seq find Next429Ex.vi' to fail. It's my first clue that something is wrong - I think not that my buffer must move each time. I have to actually do some pointer math in my real API to fix this, but did not bother with this example. The question is the same regardless of the fix - up.

    The attached zip contains my example VI, and C for the API Source code and an example of C using the API (which does not leak handles).

    I'm sure I'm not enter a relatively simple concept LabVIEW memory management here, but still a mediocre time so be nice.

    Regards and thanks in advance.

    Brad


  • German characters problem when calling Web Services via UTL_HTTP

    Dear members,

    I try to call the services of SAP CRM Web of Oracle PL/SQL. I used following code which works very well.
    -- call web service using Oracle UTIL_HTTP packages
DECLARE
  http_req utl_http.req;
     http_resp utl_http.resp;
     lv_request VARCHAR2(32767);
     lc_response CLOB;
     lv_buffer VARCHAR2(32000);
     lv_name          VARCHAR2(256);
     lv_hdr_value     VARCHAR2(1024);     
     l_xml XMLType;          
BEGIN     
     utl_http.set_persistent_conn_support(true);
     utl_http.set_transfer_timeout(600);
     
     http_req:= utl_http.begin_request
                                   ( url => 'http://xyz3ni92.server.xyz.com:8045/sap/bc/srt/xip/sap/crm_bupa_custid_qr/011/customersbycrmid/http_binding'
                                   , method => 'POST'                              
                                   );
     lv_request := '<?xml version="1.0" encoding="UTF-8"?>'
     ||'<soap:Envelope xmlns:soap="http://www.w3.org/2003/05/soap-envelope" xmlns:glob="http://sap.com/xi/CRM/Global2">'
   ||'<soap:Header/>'
   ||'<soap:Body>'
      ||'<glob:CustomerCRMByIDQuery>'
         ||'<MessageHeader>'
            ||'<ID schemeID="?" schemeAgencyID="?" schemeAgencySchemeAgencyID="?"></ID>'
            ||'<UUID></UUID>'
            ||'<ReferenceID schemeID="?" schemeAgencyID="?" schemeAgencySchemeAgencyID="?"></ReferenceID>'
            ||'<ReferenceUUID></ReferenceUUID>'
         ||'</MessageHeader>'
         ||'<BusinessPartnerSelectionByBusinessPartner>'
            ||'<UUID schemeID="?" schemeAgencyID="?"></UUID>'
            ||'<InternalID>2200117598</InternalID>'
         ||'</BusinessPartnerSelectionByBusinessPartner>'
      ||'</glob:CustomerCRMByIDQuery>'
           ||'</soap:Body>'
     ||'</soap:Envelope>';     
     /*set username and password*/
     utl_http.set_authentication (
               r => http_req,
               username => 'WS_USER',
               password => 'WS_PASSWORD',
               scheme => 'Basic',
               for_proxy => false);     
               
     utl_http.set_header(http_req, 'Content-Type', 'application/soap+xml;charset=UTF-8'); 
     utl_http.set_header(http_req, 'Content-Length', LENGTHB(lv_request));
     utl_http.write_text(http_req, lv_request);
     /*Make HTTP call*/
     http_resp:= utl_http.get_response(http_req);
     
     /*read response text from response*/
     BEGIN
               LOOP
                         utl_http.read_text(http_resp, lv_buffer);
                         lc_response := lc_response || TO_CLOB(lv_buffer);
               END LOOP;
     EXCEPTION
               WHEN OTHERS THEN
                    -- ora-29266 end-of-body reached
                    IF SQLCODE <> -29266 THEN
                              RAISE;
                    END IF;
     END;
     utl_http.end_response(http_resp);     
     l_xml := XMLType(lc_response);
     /*Log response for testing*/
     DELETE FROM webservice_log;
     INSERT INTO webservice_log (seq_id,xml_response) VALUES (sqe_Webservice_Log.NEXTVAL,l_xml);
EXCEPTION WHEN OTHERS THEN
          RAISE;
END;
    However, if there are any German character in SAP, then they are replaced by UNWANTED data when they come to Oracle.

    If I invoke continues the same web service tools like SOAP-UI, then German characters do very well. I've also drawn web service queries and answers of the side SAP, and there response shows fine. When it comes to Oracle, they are themselves corrupt.

    I'm sure it's something to do with the character, but I am not able to find where and what should I fix/change.

    Thank you for your help in advance.

    DB: Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
    NLS_DATABASE_PARAMETERS
    PARAMETER                      VALUE                                  
------------------------------ ----------------------------------------
NLS_LANGUAGE                   AMERICAN                                 
NLS_TERRITORY                  AMERICA                                  
NLS_CURRENCY                   $                                        
NLS_ISO_CURRENCY               AMERICA                                  
NLS_NUMERIC_CHARACTERS         .,                                       
NLS_CHARACTERSET               AL32UTF8                                 
NLS_CALENDAR                   GREGORIAN                                
NLS_DATE_FORMAT                DD-MON-RR                                
NLS_DATE_LANGUAGE              AMERICAN                                 
NLS_SORT                       BINARY                                   
NLS_TIME_FORMAT                HH.MI.SSXFF AM                           
NLS_TIMESTAMP_FORMAT           DD-MON-RR HH.MI.SSXFF AM                 
NLS_TIME_TZ_FORMAT             HH.MI.SSXFF AM TZR                       
NLS_TIMESTAMP_TZ_FORMAT        DD-MON-RR HH.MI.SSXFF AM TZR             
NLS_DUAL_CURRENCY              $                                        
NLS_COMP                       BINARY                                   
NLS_LENGTH_SEMANTICS           BYTE                                     
NLS_NCHAR_CONV_EXCP            FALSE                                    
NLS_NCHAR_CHARACTERSET         AL16UTF16                                
NLS_RDBMS_VERSION              11.2.0.1.0  
    Kind regards
    Hari

    added other details by: Hari_639 on April 24, 2013 18:45

    I'm not really experienced with utl_http, but maybe you'll read on SET_BODY_CHARSET in the documentation.
    ISO-8859-1 is the default characterset, until you specify the characters in the attribute content_type and text media.
    But your media type is not text, then perhaps affecting the body charset UTF - 8 can help.

    concerning

  • Can I change PCT_FREE for tables selected during operation of Datapump

    Hello
    I would like to know if it is possible to change the PCT_FREE for a few tables in the ether an expdb or an impdb?

    Thanks for any help.

    You may need to first create the table before the import and use of TABLE_EXISTS_ACTION = TRUNCATE.
    : p

  • Need help finding a MBean via Java code

    I'm reading the bea.jrockit.management:type mbean = Memory, but nothing I've tried works. Y at - it a special to access this value tip (I'm trying to find the physical RAM installed on the hardware)? I see him just day to Mission control, but I can't get the code to work.

    I tried
     
env.put(JMXConnectorFactory.PROTOCOL_PROVIDER_PACKAGES, "weblogic.management.remote");
env.put("jmx.remote.x.request.waiting.timeout", new Long(10000));

serviceURL = new JMXServiceURL("t3", serverName, port, "/jndi/" + "weblogic.management.mbeanservers.domainruntime");
connector = JMXConnectorFactory.connect(serviceURL, env);
connection = connector.getMBeanServerConnection();
result = connection.getAttribute(new ObjectName("bea.jrockit.management:Location=" + System.getProperty("weblogic.Name") + ",type=Memory"), "TotalPhysicalMemory");
    and...
    serviceURL2 = new JMXServiceURL("t3", serverName, port, "/jndi/" + "weblogic.management.mbeanservers.runtime");
connector2 = JMXConnectorFactory.connect(serviceURL2, env);
connection2 = connector2.getMBeanServerConnection();
result = connection2.getAttribute(new ObjectName("bea.jrockit.management:type=Memory"), "TotalPhysicalMemory");
    The first method works for the "java.lang:Location = myLocation, type = OperatingSystem"), "TotalPhysicalMemorySize", but this value does not correspond to the actual amount of physical memory (shows 4 GB for me instead of 8 GB).

    Thank you.
    -Bill

    Hi Bill,

    You must register to the JRockitConsoleBean before you can programmatically access the MBeans. This is what happens when you run the Mission control.

    R28 the MBean is called oracle.jrockit.management:type = JRockitConsole and for R27 is bea.jrockit.management:type = JRockitConsole.

    For example

    Connection2.getMBeanInfo (new ObjectName("bea.jrockit.management:type=JRockitConsole"));)
    result = connection2.getAttribute (new ObjectName ("bea.jrockit.management:type = Memory"), "TotalPhysicalMemory);

    Best regards
    Erik

  • Why CRLF are treated differently when called via bridgetalk?

    I stumbled upon another mystery: when I run a script directly in ExtendScript, he interpreters '\r' as a CRLF. Yet, when I called him by bridgetalk, the '\r' was left as text.

    This strange behavior is if I set the target to photoshop or not. Can someone tell me why please?

    Here's the unit test (CS6, Windows 10)

    -L' script call:

    #target bridge

    var bt = new BridgeTalk;
    BT. Target = "photoshop."
    var myPath = "~ / Desktop/testCarriageReturnSubstitution.jsx ';"
    var ScriptFile = new queue (myPath);
    fOpen var = scriptFile.open ('r');
    script var = scriptFile.read ();
    $.writeln (script);
    BT. Body = script;

    BT. Send();

    -Test script:

    #target photoshop

    var badString = ' \rTitle\rCity, State - USA December 2015 ";

    var nouvelleChaine = badString.replace ('\n', "\n");

    $.writeln (badString);

    $.writeln (newString);

    The runtime directly via ExtendScript result:

    Title

    City, State - USA December 2015

    Result: not defined

    Result when called via the calling script:

    Result: true

    \rTitle\rCity, State - USA December 2015

    Thank you

    / Tim

    Thank you, Uwe for responding! I tried that before posting, and the result was '\\r '. It seems bridgetalk converts these escape characters to the text.

    I found another thread (Re: \n doesn't work does not correctly) addressing the question, pointing way back to CS2 times! Wonder why Adobe does not solve the problem, and/or documenting this bug to save us some headaches, or maybe they he documented in a dark place.

    Workaround to this problem is to use decodeURI and use the hexadecimal code for these special characters. In my original unit test, I have changed the script photoshop for the following:

    #target photoshop
    var title = "title text";
    var CityState = "San Francisco, California";
    var badString = ' \r'+Title+'\r'+CityState;
    var goodString is decodeURI (Title + "%0d" + CityState);.

    $.writeln (' string bad encoding: ', badString);
    $.writeln (' string right encoding: ', goodString);

    Result:

    A string of bad encoding: \rTitle Text\rSan Francisco, California

    Right channel coding: title text

    San Francisco, California

  • Code 80070241 in Windows update and "Windows cannot verify the digital signature for this file" when you try to run any program.

    Windows Update has appeared today when we started one of our machines, informing us that there are some installed updates. After reviewing the updates, we clicked on the "Install now" button, and immediately, it failed with the above error code.

    I tried to run regedit a reason unrelated, and it came with a dialog box error with "Windows cannot verify the digital signature for this file. A recent hardware or software change might be installed a file that is signed incorrectly or damaged or maybe it's a malicious software from an unknown source. »

    After researching here and elsewhere on google and did not find anything suitable, put us in the Win7 disk, recovery tools and tried to go back to a previous system restore point (3 days).

    The restoration went well, restarted, but the problem persists.

    Then, we just tried to install anti-malware software, but when trying to run the installer, we get a different error message indicating 'ShellExecuteEx failed; Code 577 "and then the same message on the verification of the digital signature.

    The computer is running fine all yesterday and has worked very well since just after the new year when he has been upgraded to Windows 7. No material changes have been made, and no software changes were made by users in the course of last week.

    The computer is an AMD Athlon II X 4 with 4 GB of RAM on a motherboard Asus M4A78-EM, linking a 64 GB SSD, with a 250 GB drive SATA data/programs. GPU is a Nvidia 260, and it has a CD and DVD player as well. It is connected to our router using the gigabit ethernet interface motherboards.

    It was under windows 32 - bit XP SP3 up just after the new year. When we put in place the new SSD to replace a hard drive older than we have did a new install of XP (slipstreamed with SP3) and then used the upgrade 32-bit W7 Home premium DVD version to upgrade the system. Since then, the system runs flawlessley.

    On the machine is MS office XP, Firefox 3.6.3, AVG 8.5 and a few games such as the Turbine DDO.

    The main user account used to try to solve these problems and to run Windows Update and try installing programs is a member of the Administrators group.

    Firefox works fine, serve, and he plays the games installed very well also. AVG reports to date, with no problems and has detected no threat.

    However, try to view the registry with regedit, or start Viewer event or compmgmt.msc that all do appear the message "cannot verify the digital signature.

    ***************************************************

    Can anyone offer an opinion on what might be wrong with this facility please, and how we could do to solve?

    Cannot run chkdsk/scandisk as he bought the message "cannot verify the digital signature" etc etc.

    This morning, the machine began to behave differently - stop playing back badly, refused to start Device Manager, open Control Panel correctly etc.

    So, I reset the BIOS to boot from the CD-ROM, slapped XP SP3 in reinstalled, then upgraded to Win 7 again.

    Still have no idea what caused the problem, but it seems to be gone now - reinstalled the same applications, AV / programs anti-malware, games, etc and everything seems to go fine now.

    * shrug *.

    Computers.

  • Error downloading: digest of invalid signature for main manifest file assigns System.exit unauthorized calls!

    Hello fellow sufferers!

    I am trying to download my first application at BB appworld. While trying to download the file * .bar, I get this error:

    Digest of invalid signature for main manifest file assigns System.exit unauthorized calls!

    What does this errormessage?

    It's my MANIFESTO. MF file:

    Archive-manifest-Version: 1.1
    Archive-created-by: BlackBerry Tablet OS Elf BAR Packager 1.3.1

    Package-Type: application
    The author of the package: -.
    Package name: de.helex.clipmanlite
    Package version: 1.0.2.0
    Package-Architecture: armle-v7
    Package-author-certificate hash: _QCY8j3bSpt-67mhJLED-4xZooXxA7vZBMu2MbHI97SYlh5aoRxaHi44Ie-WMfh9-AGPG2YnwlW7X-AJ-A7xPQ
    Package-author-Id: gYAAgEPQ7F7MvQXnpyTXcW_b9KQ
    Package-Id: gYABgFYDI7fyWoGVx88_tVwB_Ic
    Package-Version-Id: gYACgHvOOTEXtanI-HRmZlA82u8

    Application name: ClipManLite
    Application Description: Clipboard Manager
    Application version: 1.0.2.0
    Request-requires-system: Tablet OS/1.0.7.0
    ID of the application: gYADgFZI5L0DEfspLgVvaOJ8kK0
    Application ID-Version: gYAEgIravTIRSld3gfNygimA3qI

    Name of the entry Point: clipmanlite
    Entry point: QML_IMPORT_PATH = app/native/import QT_PLUGIN_PATH = native/app/plugins LD_LIBRARY_PATH = lib/native-app app/native/clipmanlite - blackberry - platformpluginpath ./app/native/lib/platforms platform
    Entry-Point-Type: Qnx/Elf
    Entry-Point-icon: native/icon.png
    Entry-Point-Splash-Screen: native/splashscreen.png
    Entry-Point-focus: auto
    Entry-Point-System-stocks: run_native

    Archive-asset-name: native/clipmanlite
    Archive-asset-SHA-512-Digest: EgIFzXisCdbgWHASq7sSPYjSDWRzzl77_hw-TYnopqUjV9JDbRORwzCruReZOG2iq3SQv-Yi50NcD7XPHqz_Jw
    Archive-active-Type: Qnx/Elf

    Archive-asset-name: native/icon.png
    Archive-asset-SHA-512-Digest: MFqIlfKgqTrhI3yZkGZyv0l1YUubJblUMc6mhcZuhJfktqX5x-NwfWL7m-McGoKUMjgCTbFBSW1e3voCcZoBGg

    Archive-asset-name: native/splashscreen.png
    Archive-asset-SHA-512-Digest: CNzXgezPb8oKHCJ_4Zqk2_Fb1D6tkMVGEn3mhPQFRD7REdRG0ZnELLdu0gkM1pVvyObc0bH2ouv84_QwJ7kuLg

    Archive-asset-name: native/lib/libQtCore.so.4
    Archive-asset-SHA-512-Digest: 9gnZ149YG3kPs8ZFbHoZ6kFrL5dj4yW40urXd-uZPDrif0zYMzI29TUsp794U4GBiQUXaKKlbZOWUqIZlEHI9A

    Archive-asset-name: native/lib/libQtGui.so.4
    Archive-asset-SHA-512-Digest: EgYpcFf7xItFiqQ_PDm8FFVFu5vdbIrg4-h2d3sB-3FfPuAlnZasR_UQ45yNxzZoIwowtdaNVstIvVZXd7j1AA

    Archive-asset-name: native/lib/libQtOpenGL.so.4
    Archive-asset-SHA-512-Digest: is9HkVzh6mFpVs0N7LkYCH1Aps3pt-Q20XHP37jLnLPnoME4kl3hl9sCkCU1XCm-PchfoX51GxjMS9wBkSuMgA

    Archive-asset-name: native/lib/libQtNetwork.so.4
    Archive-asset-SHA-512-Digest: pP6tPwXFGmFQnYTuHn80aFV7xh8pG4y6wOWIIvGGlp4UXl570Gq5W3lbOuCGtCQKyPwPLc7bVOPuK3Ur8hf6SA

    Archive-asset-name: native/lib/libQtDeclarative.so.4
    Archive-asset-SHA-512-Digest: W2wS_9_9Cqqqio2w6251fhFnxnQm4ZY2COFm5xQQVCQwcMCvly2KmGxVruZO2yc_WN65MGeEOvH4cAAt1rOznQ

    Archive-asset-name: native/lib/libQtSql.so.4
    Archive-asset-SHA-512-Digest: 7H8cJrn5yhG3p4K3G4oYO8XWr_D_AZcLD5T9Zfn6mc8lUiyJ4o6mXouXmFC9imoMeUmq4KsTVM2AdhZStXA7gQ

    Archive-asset-name: native/lib/libQtSvg.so.4
    Archive-asset-SHA-512-Digest: dJk9FYrRJGqPeaEG17LWTKC_ogV6Few2BzK4t-WlcXUg0MJxinKp5jigsCHzFm6SJiFJLHDj3jRS16bTV12qgQ

    Archive-asset-name: native/lib/libQtScript.so.4
    Archive-asset-SHA-512-Digest: 809rAuYFWIOxeJuNJcL63URoMKXz6NKrmKOfZZWDjPUVqTJkxL7tBr_joHZR-EVY1mSJ8wBbh64iB6YdbqTmUg

    Archive-asset-name: native/lib/libQtXmlPatterns.so.4
    Archive-asset-SHA-512-Digest: zVw6F43U2TKa3dbYosygRliRlhdNisb-sdBmzh6AgTyh9GlVCkLLBie781GpQLA-uOyKpDOoT5B6N8h4ulaCBw

    Archive-asset-name: native/lib/platforms/libblackberry.so
    Archive-asset-SHA-512-Digest: uEdFgiXdWMo3MV5szE5vn2EcVXxubMZl4e71PT4z614ONV2ZqcFKzf6CFGzV9mwQGlWKm5Jrra71I2fzASnurw

    Archive-asset-name: native/blackberry - tablet.xml
    Archive-asset-SHA-512-Digest: mzIshm0x0oBMW7T-SlYg5ywvgFSeeHSyx53kkvzaf - WQWDtkbxqqXDldjCQrvYv631_2Q6OCAiYOmZRoslsYg

    Any ideas what could cause this error?

    First I thought maybe it's because the same mistake: what to do if your Package ID was rejected by BlackBerry App World

    But the creation of a new element of product does not help with this problem.

    It is a native application of qml Qt. It does not store the files, need to no write access and uses only simple, free of components created 1.0 QtQuick with no additives. So, it should be the best portable application out of my small collection.

    Unfortunately I have no real device here since I, like many of you, to present one of my tablet at BB App World Applications, first to get a.

    Google was not my friend on this topic, so I hope someone has this kind of error message and could tell me what could bring it. Any kind of advice are welcome.

    Best regards

    HELEx (Ambassador of Qt)

    FYI, a new simpler command allows to sign the 1 step:

    BlackBerry-sign - storepass .bar

    P12 both RDK of passwords must be the same, but this measure will apply to both the two signatures. It should have the same results as the command that you run.

    Kind regards

  • just bought a new EOS 7 d mk2 camera but can't open the CR2 raw files in Photoshop CS5. I downloaded the new raw converter for the camera which is the DNG 8.7 format for my windows computer operated. When I click on a CR2 file I get a subventio

    I just bought a new EOS 7 d mk2 camera but can't open the CR2 raw files in Photoshop CS5. I downloaded the new raw converter for the camera which is the DNG 8.7 format for my windows computer operated. When I click on a CR2 file I get a notification to come as States "could not complete your request because the file appears to be a model of camera that is not supported by the installed version of camera raw.

    I'm entered in Photoshop and loaded the dates above, but have met 3 mistakes when you do this (1) Adobe Bridge CS5 4.0.5 (2) Adobe extension Manager SC5 5.0 update (3) 12.0.4 for Photoshop CS5 Photoshop

    I tried for 2 days now to try to get the operating system for your support/help will be most appreciated.

    My old camar is an EOS20 D and I have no problem with CR2 files it produce

    Hi rodaks, george

    Images II 7 d would be directly supported in Photoshop CS5 as requiring a new camera raw.

    So, you must download the free DNG Converter to convert these images to DNG and then open the DNG converted in Photoshop.

    See this link for download DNG Converter 9.0:

    For Mac: Adobe - Adobe Camera Raw and DNG Converter: for Macintosh: Adobe DNG Converter 9.0: thanks

    For Windows: Adobe - Adobe Camera Raw and DNG Converter: for Windows: Adobe DNG Converter 9.0: thanks

  • I have CS5 Etended on my computer and when he went to day I got this error message: "this serial number is not for a product calling it" | CS6 cs5, CS5.5, ideas he original serial number since?

    I have CS5 Etended on my computer and when he went to day I got this error message: "this serial number is not for a product calling it" | CS6 cs5, CS5.5, ideas he original serial number since?

    Contact support by web chat or by phone. Serial number of questions can be supported on a forum.

    Mylenium

  • Hello, I have a license CS6 and when I go to install is said that serial number is not for a product calling. Please try another I double checked my number in my adobe account and that's okay. any help?

    Hello, I have a license CS6 and when I go to install is said that serial number is not for a product calling. Please try another I double checked my number in my adobe account and that's okay. any help?

    Your CS6 is a license upgrade.  When she asks eligible version waiting for you identify the previous version that you upgraded as proof that you are eligible to use the upgrade.

    Error "this serial number is not for a product calling it" | CS6, CS5.5, CS5

    http://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-qualifying-product.html

  • How can I download updates for CS5 Extended when I get the error message "this serial number is not for a product calling it"?

    How can I download updates for CS5 Extended when I get the error message "this serial number is not for a product calling it"?

    Updates are not related to series numbers, so you must have done something compared to try to use an upgrade rather than an update.  Adobe not revise older versions of their software to adapt to the latest hardware/devices.  They create/sell new versions of their software for it.  If you subscribe to the Cloud at some point you shouldn't have a problem with the software becomes obsolete.

  • Which phones Blackberry works for other phones and operating systems when creating themes? (Please read)

    I build themes and I want to support all devices.  I know that if I build a theme on a device and

    Operating system that will work for other devices and operating systems.

    Can someone tell me what base unit will be other devices?

    example: Bold 9700 will work with the Bold 9650, 9000 "BOLD" and so on (it was just an example and probably inaccurate)

    Thank you for your help in advance

    Hello

    Just a quick note... 9700 themes work with 5.0 screen 480 x 360 OS (89xx, 96xx) dimension and visa versa 96xx and 89xx 5.0 OS themes will work on the 9700

    85xx theme OS 5.0 works on 83xx 5.0 OS visa versa 83xx 5.0 OS themes will work on the 85xx with an OS 5.0 but remember the layout of the 83xx series is very different the 85xx, such as dialogs etc... If the theme of predict a 83xx look like funny on the 85xx, which means that the old layout

    Storm 1 themes 5.0 OS will work on the Storm 2 and visa versa as it is exported OS 5.0

    And it's just like all the other models have screen sizes different etc. such as the Pearl, the torch and the Flip

    I hope this has helped!

  • When you try to print photos or turn them into a book, I constantly get the message that I 'am not connected to the internet"when I am clearly, via wifi.

    PHOTOS, Version 1.3 often gives me an error message "you are not connected to the internet" when I am clearly, via wifi.  This happens when I try to print a photo or to place pictures in a book.  (It also happens when I ask to export a photo on the desk, but then it is exported, despite the error message.) In the preferences of pictures, I chose "download the originals of this Mac", but the problem seems to be when the photo of the cloud recovery.  My operating system is up-to-date: 10.11.3.  My desktop Mac is mid-2010.  I take quite a few photos, and maybe download them to the cloud and then download them to my computer takes a long time.  That's the only explanation I can find.

    You have activated the iCloud photo library and selected the option to optimize the photos in your local library?

    If Yes, then the Photos is a download full version size for use in the book, print, or share via email, etc.

  • LabVIEW 2010 crash when calling user32.dll

    Interesting LabVIEW 2010 'characteristic', I discovered this morning.

    Attached are two identical screws, a registered in 2010 and a registered in 2009.  These screws have been written specifically to demonstrate the bug, I came across this afternoon.  Each VI when it is run needs you to find a specific program (window) opened in Microsoft Windows and bring it to the foreground.  It is based on 'user32.dll' to perform this operation.  It also allows you to specify the calling convention for the function call.

    LV 2009, calling convention works without error.  However, in LV 2010 the calling convention of the function must be "stdcall (WINAPI)" and not the default value of 'C '.  If the calling convention is 'C' LabVIEW hangs and then closes without warning.

    If you happen to have LV 2009 and 2010 LV on your computer, I would like to hear if this phenomenon is duplicated so that I can identify if the bug is LV 2010 related or is more specific to my personal configuration.

    Thank you

    ~ David

    221113

    Return

    		COLD LAKE with the calling convention incorrect siliently crash LabVIEW can.
    LabVIEW 8.5 2009 could adjust the convention to call at run time if the user has selected the wrong option. In 2010, it is no longer a case. More information is located in the 59KB14WI knowledge base

    Workaround: Use the correct calling convention

    Reported Version: 2010 32-bit    Solved Version: N/A    Added the: 2010-07-23

    Release notes for 2010.

Maybe you are looking for