Signature icon issues

Similar Questions

• 2 10 Android icon issue of yoga

  Hello. I just bought a Yoga 2 10 Android tablet today (1050F) and I did the KitKat of Lollipop udgrade, have fully charged the unit, and I have a question. There is an icon in the upper right corner, which is a circle with what looks like a monitor inside the circle and a small circle near the lower right corner of the screen. I watched a lot of icons from Lollipop may not know what it means. Anyone? TIA.

  Hi, this is the icon of smart switch. You have 4 on the gen 2 according to the way in which the Tablet is positioned. It can be manual or automatic and can be changed in the settings or central place adjustments and notifications.

• Shortcut icon issues

  my icons on my desktop to work for awhile and then later (days) when I click on them they say shortcut not valid. When I put the shortcut on they have as the world looks is not the look of the site for my icon

  Original title: icons windows 7

  Hello Mike,.

  Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing.

  It would be possible that the icon cache where stored windows icons is damaged. To resolve this problem, rebuild the icon cache by deleting.

  Follow the steps below:

  • Delete the hidden file ShellIconCache.

  In Windows 7, each user has its own file named Iconcache.db whose location is %USERPROFILE%\AppData\Local\Iconcache.db

  AppData is a hidden folder. Make sure you turn on the computer to see the hidden files and folders.

  Show hidden files

  http://windows.microsoft.com/en-US/windows7/Show-hidden-files.

  • Go to the above location which, by default is C:\Users\username\AppData\Local\Iconcache.db and delete the iconcache.db file
  • Restart your computer.

  Once the computer restarts, it will recreate a good icon-Cache file

  If the problem persists, increase the size of the icon cache.

  1. Go to start and type regedit.exe.
  2. Go to HKLM\SOFTWARE\Microsoft\Windows\ CurrentVersion\Explorer.
  3. Now, create a DWORD value called Max Cached Icons and set the value to 4096.
  4. Close the registry editor.
  5. Restart the computer.

  Important : This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the help windows below article.

   

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Hope this information was useful. Let us know the results once you have tried these methods.

  Thank you

• AdvancedDataGrid disclosure icon issue

  Hi all

  I use AdvancedDataGrid HierarchicalData.

  I have the icon of disclosure on the 2nd column, but I need to implement the converter for this column also.

  The problem is, when I put the rendering engine for the column, the disclosure icon disappeared.

  Is it possible to make the disclosure icon it while I use the rendering engine to render the column?

  Thank you

  Billy Sulacher

  Implement the functionality of disclosure icon in your renderer. You can extend AdvancedDataGridGroupItemRenderer or copy code to disclosure of your converter icon.

• The icon issue

  Hello
  
  This is probably a question with an easy answer.
  
  In the next code example Source Flextore, which are the icons as a package? (productsview and samples.flexstore) and how to build them?
  
  Thank you very much
  
  

  It's true. productsView can be defined in the first tag as follows:

  xmlns:productsView = "myComponents.*".

• Possible to remove the icons for layers and Signatures?

  I have a pdf TSF bookmakrs and the pdf file open mode bookmakrs. Is it possible to remove the layers and Signature icons in the Panel on the left? I would like to only display the bookmarks icon.

  Thank you

  Is not possible.

• Somehow, I've changed my desktop background at bottom blue clear icon captions. How do I change back to delete.

  Original title: question desk top

  Somehow, I've changed my desktop background at bottom blue clear icon captions.  How do I change back to delete.  I tried several restore points, but none seems not to work.  Any suggestions?

  Hello

  Check if the steps by ClickStartComp (posted June 23, 2010) of the following thread helps you fix this problem.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-files/desktop-icon-issue/5c5826c3-8a73-4265-bbf5-5a840fccf9af

• the desktop icons and labels are not transparent

  the desktop icons and labels are not transparent

  Hello

  · Were there any changes made on the computer before the show?

  You can check out the post below which deals on the same concern: http://answers.microsoft.com/en-us/windows/forum/windows_xp-files/desktop-icon-issue/5c5826c3-8a73-4265-bbf5-5a840fccf9af

• startuprepairV2 with signature of the problem 01: autofailover__

  I have windows vista. Do not start with repair unable to resolve the startup problem. PC just loop around Startup Repair continuously to try to restart again. System Restore does not work and "last good configuration does not work either. Gone through all the options available on the screen, without success, so now completely blocked. Vista installation disc supplied with the machine.
  The problem is listed as:

  Problem event name: startuprepairV2
  Signature of the problem 01: autofailover
  Signature of the problem 02: 6.0.6000.16386.6.0.6000.16386
  03:6 problem signature
  Signature of the 04:1638424 problem
  Signature of the problem 05: no cause root
  Signature of the 06 problem: no cause root
  Signature of the problem 07:0
  Signature of issue 08: 1
  Signature of the 09 problem: System Restore
  Signature of the problem 10:0
  OS version: 6.0.6000.2.0.0.256.1
  locale ID: 1033

  Any ideas?

  How to do a startup repair disk:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Can I change the size of icons?

  Hi, I'm updating my phone last night and sizes of icons are charged (largest) and now I can't find the setting to change sizes of icons
  Issue of MT is I can change it and if I were is the setting?

  And I'm sorry that my English grammar is not so good
  Thank you

  @kdo no, you can't, unless you download a different home Launcher.

• Problem with the signature of the message @.

  Please answer: as a newly created message @ add my signature. I put a signature icon does not work is not enabled?

  You try to make a signature graphic ?

  Note: The HTML Signatures must be less than 4 KB.

  Open a new Message window and create your signature. (Insert the graphic & text). Click on the Source tab (view |) Source Edit if not already checked). Highlight the complete source code and copy / paste into Notepad. File | Save under and in the file name field, save as htm, (i.e. Sig1.htm). It will be saved in My Documents by default. Go to tools | Options | Signatures. Click: File | Browse and insert your saved signature | Apply. You can now rename it if you wish.

  Of course, if the recipient reads in plain text, they don't see the it.

  Bruce Hagen ~ MS - MVP [Mail]

• Acrobat Pro DC - failed to create the digital signature field

  Hello:

  I use a trial version of Acrobat Pro DC and PREPARATION of a form to an existing PDF document. I can't find a way to create a digital signature field that can be "click (to sign).

  Note: The existing .pdf has a digital signature field works but when I click on 'Prepare the form' and select this shape, it blocks every time Adobe Acrobat Pro. I must change the .pdf first, delete the existing digital signature field, save the .pdf, then on 'Prepare the form' and select it with the required signature checked.

  I read several articles in the knowledge base and tutorials that refer to an icon in the toolbar of the digital signature, but I have not this icon can be selected. That's what I see:

  

  When I select the available signature icon (envelope with x) this simply creates a text field, that when the document is opened in Adobe Reader, this field disappears when you click it.

  

  I tried with Adobe Acrobat Pro on Windows 7 as well as currently on Mac OS 10.10.5 (Yosemite). Help to solve this problem would be greatly appreciated.

  Thank you

  The problem is that you have selected the signing required check box. When you do this, it limits you to a form that is compatible with Adobe sign, which allows no digital signature fields. What you can do is to click on the more button in the right panel and select "Back to the form of Acrobat" and you will be able to add digital signature fields.

• How to prevent the fields of signature on my IPAD Adobe Reader 11 endangered endangered

  Hi, I use Adobe Acrobat XI pro trial version. I converted a Word document to PDF format. I added text fields, scripts to add Java automatically today's date as default, the form RESET button and Signature fields. File is saved as a standard backup. All this is done in the Windows 7 environment. On the same computer, the signing in Adobe Reader fields are visible even if I don't have the means to test. When the same file is sent by electronic mail and opened on an IPAD using Adobe Reader 11.2, signature fields are missing. I intend to have my users access the file (and 30 other same) on an IPAD. Can someone advise how to resolve the problem of missing signature field. It seems that Adobe do not help with these questions, because it is not considered to be an installation problem.

  Digital signatures do not rely on mobile versions of Adobe Reader. Other viewers PDF as Expert PDF of Readdle treat like fields of electronic signature, allowing the user to draw/apply their signature designed, but is not the same as a digital signature. Adobe Reader for iOS allows you to add an electronic signature, but it does not use the fields of digital signature for this feature. Instead, you tap the screen, choose the icon annotations, and then click the signature icon.

• Impossible to obtain Verisign Signature validated in Acrobat

  For the last six months, I was able to get my digital signature Verisign validated in Adobe Acrobat format. Just today, I renewed my Verisign certificate for another year. I saved the certificate on my hard drive using a password to fix it. When I certify a my signature on a document, the resulting signature icon says "...". invalid persona"and the icon in the upper left corner (the head and shoulders of a person) has an exclamation mark on it.

  I am frustrated trying to figure out what is wrong. Any suggestions would be greatly appreciated.

  Hi Mike,.

  Acrobat (and when I say Acrobat Acrobat and Reader time) it is sufficient to establish a valid string. If you have selected one of the root certificates as the anchor of trust and that the signature is valid, then you're done. One thing I suggest you do is to ensure that all certificates below the anchor of trust have the revocation information. In the view of the certificate dialog box, you can select the revocation tab. As you highlight (select) each cert below the anchor trust you should see information in the Details window on the revocation information. If the text says that it is missing or there are problems let me know, otherwise you are good to go.

  Either way, you might be able to uncheck display all found certification paths (above the window where you see three identical channels) and then you will see only the a string that uses Acrobat. That could help to simplify things.

  Finally, it would be great if you could mark the thread as answered (that is, only if you feel the question was answered) to help other people looking for the forum close to the bottom of what you have to look.

  Thank you

  Steve

• Update 0.268.4

  I was very surprised to receive an update tonight (at 0.268.4).

  I saw no issue date as it was installed and it I don't see anything on this site.

  Someone knows what has been updated? Was it perhaps preparing for ICS?

  OFF to have a nose autour to see if I can spot something new!

  The flashing and flickering text / icons issue seems to have been addressed.

  In fact, the user interface seems to be smoother overall.

  I also noticed that some applications now correctly display text rather than back to the front (can't imagine what difficulty requiring!)