Signed demand suddenly does not work

Similar Questions

• BlackBerry AutoText on Q5 Q5 suddenly does not work

  I have a problem on autotext @ my Q5. He is suddenly does not work. All the words that I recorded on my word substitution will not appear on my BBM. My OS: 10.1.0.4181.

  Can any body give a solution? Thank you

  No, my word substitution list is not empty, where is full. I already solved it by myself. It seems that we can only put Word Limited. So after that I deleted some of my word, inserts rerun. I think it is a bug for the Q5. Maybe we can only place max 80 words.

• Tecra M2 suddenly does not work with power supply

  Hello

  Suddenly my laptop does not work with power... (with the battery, that it works very well)

  The power supply works fine.

  Someone at - it an idea for this error?

  Winni

  Maybe the DC-in port has no contact with motherboard anymore and the electronic board can not get AC power.

• Touchpad suddenly does not work

  I have a Compaq Presario CQ56-202 and suddenly while making a comment in a thread on FB one (very briefly) saw a flash symbol... something with a red on X. It is so short that I didn't have a chance to really see what it was. Have never seen him before. Then I noticed a small red light on the touchpad, and now the touchpad does not work. The mouse works fine.

  Someone at - he a clue as to what happened? What can I do to get it working again?

  Number 1 in this photo shows the area of tap to toggle the touchpad on some models. Have you this?

  http://support.HP.com/us-en/document/c01983909

• Client VPN suddenly does not work

  An external interface address changed on this PIX 501 yesterday - all of a sudden their client VPN does not work.  I checked that nothing in the config VPN configuration has changed.  I now see a *(HASH.) ("OAK NOTIFY ISAKMP INFO: NO_PROPOSAL_CHOSEN") in the journal on the VPN client.

  I crossed referenced on google - nothing in the statements of NAT, Access-list, or VPN configurations have changed.  Any ideas?

  Thank you
  Greg

  Your configuration is absolutely perfect.

  Please, try the following:

  no interface card VPN crypto outdoors

  card crypto VPN outside interface

  Remove and reapply the cryptomap on the external interface and see if that helps.

  Thank you

  Jeet Kumar

• Send signed with password does not work

  I'm trying to password protect some PDF files then use to send to the signature.

  I get an error of unsupported file type.

  It is a PDF. I added the Adobe password right.

  Help, please!

  I bought this so I could easily send things for signatures.

  It does not work if you add a password?

  I have to do something special to send protected Word files?

  Hi cynthiab17320112 , billa820241 & rd522,

  Please check the help below link:

  - How to encrypt your documents using Adobe sign

  Kind regards

  Nicos

• [Ideapad Z480] Dolby Home Theater suddenly does not work

  Hi all

  I have a problem with home theater dolby (DBT as I call it) today. I explain it. well, that's how. usually when DBT is off, the volume is normally low and all those that somehow the normal speaker settings. When I click on the DBT icon on the tray, usually it brings up 3 profile which is film, music & game. But today, it does not work. whenever I have I turn it on, there is no change in sound at all (volume, bass, pitch, etc.). even the equalizer slider made no change on the sound produced by the speaker. I don't test it on my helmet, speaker external and theres no change. but the noise is always present and no change to dolby. can someone provide me with a solution?

  Thank you and sorry for the bad language, I have trouble typing in English.

  OK NVM, I fix it. After installing dolby advance audio v2, I opened, select any profile, then end task in the process from the Task Manager, uninstalling dolby advance audio v2, then install dolby home theater v4. It works fine now.

  Thanks a lot neokenchi. I appreciate your help

• MUTE button suddenly does not work

  I have a sl410 with windows 7 Home premium pre-installed and all the multimedia keys worked very well.

  After a few updates (driver lenovo and windows), mute my button does not work.

  Because I use Hibernate instead of shutdown that I can't say precisely what update caused this problem.

  A strange thing is that when I turn off the sound by the control of its use in the system tray, laptop mute button lights! But by pressing the button on the laptop has no effect.

  Lenovo update program says there is no update for me.

  Any suggestions?

  I solved the problem myself, but I don't know how!

  First of all, I used the recovery DVDs to restore windows. I saw "running windows for the first time" and all but the problem was still there. So I tried to downgrade my bios to 1.30 (it was 1.31) but I have found the bios file (thank God!).

  But after a few updates from Lenovo (power management, audio colleague and...) the problem was gone.

  Now everything works.

• Selector color Photoshop suddenly does not work

  Hello

  I never had this problem before. I worked on a project in Photoshop, and for some reason, he now works only in shades of gray. When I used the color picker to change the color, it does not work.  I know, don't forget to do anything different to make it work only in shades of gray, but I can't seem to understand how to switch color mode and I'm in the middle of an important project. Anyone know how to fix this?

  Penny Jones

  [email protected]

  Look at the Document tab at the top. RGB/8 should be the norm.  If you somehow typed 'q' on your keyboard, then it would read

  'Mask quick/8' and the color picker would not choose a color. Press q for back RGB.

  Always check the Document tab, it will clue you into what you have selected. He says "Layer 0, layer mask/8" If you have selected a layer mask.

  Finally you may have selected a color channel and it would read layer 0, blue/8.  Cmd/Ctrl 2 can go back you to RGB.

• SpeedGrade CC 2015 suddenly does not work on my monitor 4 k

  I use Speedgrade CC 2015 since August and it opened fine.  But recently, it opens not on my 4 k screen.  He tries by default open on my HD screen no smaller, and when I drag him to the monitor 4 k, it looks like this...

  Can't seem to make it work right.  I want to reiterate, it used to open and run perfectly on my 4 k monitor and now it doesn't.

  Data sheet:

  Mac Pro (end 2013)

  OS X Yosemite 10.10.5

  Processor; 3.5 GHz 6-Core Intel Xeon E5

  16 GB 1866 MHz DDR3 ECC memory

  Graphics AMD over-pants D500 3072 MB

  The two monitors:

  H213H screen: 21.5 inches (1920 x 1080) AMD over-pants D500 3072 MB

  U28D590 (Samsung) display 27.5 inches (3840 x 2160) AMD over-pants D500 2072 MB graphic (it is the monitor it should work on but does not work)

  Firstly, SpeedGrade will put the user interface on the main system monitor, you can not change this. Period. If the 4 k monitor is your 'hand' monitor sees of your operating system, which is where Sg will work main UI, and if the 1080 monitor is you 'main' or number 1 for your system, this is where he will put the part of the program. And it will only use your number 2 screen (as the OS sees it) for the monitor of the program if you have enabled display options double on the key icon view tab.

  To set the dual display on a monitor, SpeedGrade has a rather unique approach... Look at the next screen, in the display of the icon of the key (settings) tab...

  

  First of all, you must check 'Enable' under "Dual Display Output"... then

  (1) ' left' and 'Top' say Sg where in relative terms, the upper-left pixel of your second screen is to the left or right and upwards or downwards from the upper-left pixel of your number one OS or the main monitor.

  In my case, I have two 1920 x 1080 monitors stacked vertically, so the top left pixels of two monitors are in the same place left to right, so my 'left' is set to 0. If you want my second screen to the left, that would be the width of the number of pixels of the screen of this second as a NEGATIVE number, so it would be for me-1920; If the second monitor was on my right, it would be a positive number, the width of the 'primary' UI screen... who, like me, are the same, would also be 1920 as a positive number.

  The second monitor being highest on the main screen, the number of 'Top' is negative, the height of the number of vertical pixels of the second monitor. In my case, of course... it is-1080. If my monitors were side by side, it would be '0 '.

  (2) the 'Width' and 'Height' numbers are for your second screen, "the program monitor" will appear on. Simply put this number of pixels in there.

  And that's how Sg works... as intriguing as...

  Neil

• On-demand streaming does not work

  I want to config request Adobe MEdia Server on Amazon.

  I did all the steps of this statement http://help.adobe.com/en_US/flashmediaserver/amazonec2/WS6fc2df2b6d2ce 24359910e2812c396a83eb - 7ff8.2.html, but it does not work.

  I have check the sample video files in the http://www.osmf.org/configurator/fmp/# drive

  For video

  RTMP://EC2-54-234-27-150.compute-1.amazonaws.com//VOD/sample.FLV

  It says "Buffering" and nothing more

  For video

  EST.F4M http://EC2-54-234-27-150.Compute-1.amazonaws.com/VOD/hds_sample1_manif

  He said: "we have problems with playback. We apologize for the inconvenience"

  What is the problem?

  I checked the player on this page http://ec2-54-234-27-150.compute-1.amazonaws.com , it works fine

  Please read the intrdouction in http://developer.apple.com/library/ios/#technotes/tn2224/_index.html. His specifies the required versions.

• Safari suddenly does not work: search box does not

  Safari has suddenly stopped working.

  When I open it, it will open the home page, and if I go to an element in the story, they're going to open this page, but the search field that you type things does not. He has a blue line around it and and will not accept any input from the keyboard: it remains empty. I tried to quit and re-opening. I have the latest version of Safari.

  I'm on a MacBook Pro 13 inch Retina, running OS X El Capitan 10.11.3, Safari 9.0.3.

  Thank you very much.

  Hey! Take a look at this. This temporary fix helped a number of users here. Over time, everything should be resolved then wait for a while.

  A possible solution to the problem of address bar: disable the Safari Suggestions

  If you have problems to open Web pages, take a look at these techniques proposed by Apple of troubleshooting.

  https://support.Apple.com/en-us/HT204098

  Go to the Safari menu (at the top right of your screen next to the Apple icon), choose 'Quit Safari'

  Press the "Shift" key and while holding this button on your unique keyboard, click the icon of Safari on your Dock.

  Open Safari - Preferences - Privacy - data to remove any Web site.

  Open the menu to go with the Option (Alt) key - library - key locate Safari folder and place it on your desktop. Restart your Mac, open Safari and delete the file from your desktop.

  Also, try the following steps:

  Restart your Mac.

  Try to start:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once your Mac boot, restart dhcpd as you usually do.

  Additional information:

  s-bug-related-to-Safari-suggestions/ http://9to5mac.com/2016/01/27/Safari-on-iOS-and-Mac-Crashing-today-for-many-User

  http://www.Buzzfeed.com/josephbernstein/Apple-says-it-has-fixed-the-bug-that-was-crash-Safari # .xpl26R2Ld

• Acrobat Pro XI suddenly does not work

  I have updated acrobat XI pro installed on Macbook Air with El Capitan all set to date. When I try to 'create a PDF file of the file', then try to open any file I want to convert (Word doc, for example), first comes a blank word doc then it gives an error message "Acrobat cannot open 'Example.docx' because it is not a supported file type or because the file has been damaged (for example, it was sent as an attachment to e-mail and has not been correctly decoded).  To create an Adobe PDF document, go to the source application. Then choose Save in Adobe PDF format from the drop-down list on PDF in the print dialog box. "I've uninstalled and reinstalled Acrobat and no dice. This has never happened before and I got Acrobat for almost a year and it has worked flawlessly on this machine. And it comes with several types of documents and document files have gone very well because I checked and created dummy files to demonstrate the issue. Also, when I try to save a PDF file in a smaller file, I get an error message saying that I don't have permissions people or disk space. It is also a new show. No new installs either. Can anyone help please?

  Hi benjaminseides,

  LIST SUPPLIES IP AND INFORMATION of CONTACT NOVEMBER 2015.docx is a MS Word file not a PDF file, please open it using MS Word does not using Acrobat.

  Acrobat/Reader only process PDF files.

  Kind regards
  Nicos

• The scrolling mouse suddenly does not work in all the guest OS. 10 workstation

  As of today, is no longer scrolling the mouse works on any guest OS I installed. All OSs are Ubuntu 64 bit (12.04 or 14.04). Installation of a guest operating system in fresh does not solve the problem, nor do reinstall the workstation.

  I wore a virtual machine on VirtualBox, and scrolling of the mouse is working there.

  I had added the following to the guest operating system a .vmx file yesterday:

  Mouse.vUSB.Enable = 'TRUE '.

  usb.generic.allowHID = 'TRUE '.

  mouse.vusb.useBasicMouse = "FALSE".

  However, the mouse behaved properly yesterday, and it's just one of several operating systems affected.

  Host OS: Win 7 Pro 64-bit

  Could it have been caused by round of updates from Windows yesterday?

  It was caused by the round of updates from Windows yesterday. Specifically, KB2973201, which is related to the keyboard on the screen of the features.

• After the installation of Win 8.1, Acrobat 9 Pro suddenly does not work

  I have CS4 Web Premium and Acrobat Pro v. 9.5.5.  I bought a new computer to window 8.0 90 days ago, installed subsequently, active and everything is fine. Yesterday, I upgraded to 8.1 Win. Now, when I opened Acrobat Pro, I get a message saying that it has been installed as part of a suite and open another program in the first sequel. When I click OK, Acrobat is closed. I tried to open almost all other programs in the suite (bridge, Flash, Photoshop 64-bit), they run OK, but Acrobat will not always work, and there is no activation message.  I checked my Adobe account, and my version of Acrobat 9 Pro is still listed, with serial number.

  I am very disappointed, because I use Acrobat Pro a bit, and currently it will not open at all. Other that call Adobe to help (no free support # listed), with the help of discussion online (no link available), or by e-mail with them (no address listed)... What can I do to "activate"?

  I tried open Acrobat Distiller and get the same message, but when I close it, I see a brief flash of what seems to be an entry with the substance of the activation box.  It only appears for the second half, so I can't do anything with it.

  The process of installation and activation for Acrobat as part of the CS is different from that of a stand-alone Acrobat. First of all, the issue of opening another application in CS is common (not sure if she should remain open when you start Acrobat. You should be able to get more information about the CS forum. You can also just try a repair. Do not forget that Adobe will not doubts for you AA9 on Win 8.1 since they are not listed as compatible (this does not mean that they do not work together, but they are not certified for this combination). It may be that Win 8.1 added some hooks than messes up Acrobat. It might be time to move on AA XI. AA9 is the oldest product that qualifies for the upgrade.