SIM on the 3G module not found on Portege R700

Similar Questions

• Satellite A105-S2051: common Module not found. This configuration will be terminated

  Hello

  I installed Windows XP but when I try to install any utility (like the Hotkey Utility) I get the message:

  TOSHIBA common Module not found. This configuration will be terminated.

  I can't find the "Toshiba ACPI common Modules for Windows XP" on the Toshiba web site. I tried the web site in English,

  I tried every single link in the support for the Satellite A105-S2051 page.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp

  There is nothing like the Module 'common '.

  I have lived a great incredible waste of time while searching for the reader.

  So please, any help would be welcome.

  Hello

  I found Toshiba ACPI common Modules for Windows XP (Toshiba value-added Logic Device) in some different sets of Satellite A105.

  For example: A105-S271 A105-S2711 A105-S361 A105-S3611, A105-S2719, A105-S2712, A105-S2713, A105-S2716, A105-S2717

  Go for no apparent reason the A105-S2051 is not there.

  However, try the Toshiba ACPI common Modules of different A105.

  Maybe the latter won't work.

• Satellite L300 - 11L - TOSHIBA common module not found

  Hello
  I have a model Satellite L300 - 11L
  I try to install the operating system XP drivers
  Hotkey utilities for display devices
  I have an error pops up: "TOSHIBA common module not found!" This configuration will end. "

  I ask you to help and support.
  Thank you

  Hello

  I think the error message is quite clear.
  Common modules driver is not installed and so you cannot install the Hotkey utility.

  The common Modules is a crucial driver to be installed at the beginning!

  Therefore, you should visit the European driver of Toshiba. Need to select your model laptop and download this common Modules.
  Install it and then repeat the installation of the Hotkey utility.

  See you soon

• module not found wireless (701)

  Please, help me to solve this problem.
  After that I did the diagnostic system, I get message "wireless module not found (701).
  and when starting my laptop, the screen just showed HP logo and start back to the HP logo.

  Hello

  Please try this.

  Disconnect the power sector and battery that no accessories must be connected to your laptop. Then press and hold the power button on your device for 15 to 30 seconds then plug the battery & power checking if the unit works fine.

  If you are comfortable with reinstalling the wireless card that will be on the rear panel of your device you can try this steps as well.

• nilsdev - nimdbgk Module not found

  Hello

  I just installed a PCI-6509 and NOR-DAQmx 8.0.2 on SUSE Linux. I intend to use the ANSI-C drivers in a C++ application. I have not installed LabVIEW.

  I started working my way the Configuration Guide, mainly to check that I had installed everything correctly and have reached the point where nilsdev is executed. On the surface, everything seems to install OK.

  When I run nilsdev I get the following error:

  FATAL: Module not found nimdbgk.

  Is how important it?

  Of course, it does not nimdbgk, but it doesn't look like it has been installed.

  In usr lsmod | grep or returns

  nipalk

  Nation

  lspci is the map of NOR (but he seems to have the wrong number on, not sure if it is a problem)

  05:01.0 class ff00: National Instruments devices 7085.

  Part of LabView nimdbgk is why I don't have it?

  All you have ideas?

  Thank you.

  Hello

  I am not that kind of information officially, but I would speculate that it would be in version 8.9.

  «NOR-DAQmx added support for 64-bit user mode in NOR-DAQmx 8.9 (ANSI C) and NOR-DAQmx 8.9.5 (ANSI C, LabVIEW 2009 and .NET Framework 3.5).» This now allows the development of 64-bit application on 64-bit operating systems during development for a 64 bit (ADE) Application development environment. »

  The outputs by the trend that has occurred with Windows basic drivers, what would be my best guess.

  There are a few forum posts that indicate that people have had DAQmx working on x 64 systems, but with the extension of the - m32 for compilations, this isn't really 64 bit.  Unfortunately, the positions are open and do not contain really any resolution as such.

  For example this or that.  I just searched "DAQmx Linux 64-bit".

  I hope it helps a bit.  I'm sorry that I don't have a definitive answer.

  Kind regards

• Specified module not found: UNICOWS. DLL

  Cannot connect on MSN out of the blue. Error message "" specified module not found: UNICOWS. "." DLL.

  (2) MS technicians were not able to solve the problemm?

  Hello

  Remember to make changes to the computer before the show?

  You can uninstall MSN Messenger and download again.  This will help you solve the
  problem.

  How to change or remove a program in Windows XP
  http://support.Microsoft.com/kb/307895

  To reinstall MSN Messenger, follow this link:
  http://Windows.Microsoft.com/en-us/Messenger/home

  If this does not help, you can look after your query using MSN.
  https://support.MSN.com/contactus.aspx

  http://Messenger.MSN.co.in/help/

• I come from components to build a new computer. Try to use the Windows XP Pro computer old version but after BIOS and XP installation I get the error "file not found \i386\ntkrnlmp.exe. The error code is 7. "What should I do?

  New components is a new computer.
  Inserted the XP Pro CD in the drive but get the error "file not found \i386\ntkrnlmp.exe. The error code is 7. »
  Rebooted comp 5 times with the same problem after BIOS.

  Hi Milkshake83,

  Thanks for posting. Proceed as follows for this error.

  Method 1: Restore the default settings of the BIOS WARNING: this procedure may involve changing the semiconductor (CMOS) settings of the computer's complementary metal oxide and by changing the BIOS of the computer. Incorrect changes to the BIOS of your computer can result in serious problems. Change the CMOS settings of the computer at your own risk.

  To resolve this issue, restore the BIOS of the computer to its default settings. For more information about the correct settings of the BIOS of the computer and how to check and change these settings, see the computer documentation or contact the manufacturer of the computer.

  In addition, to confirm that the computer's BIOS is current, contact the computer manufacturer to inquire about the last update of the BIOS available for the computer.

  Back to top

  Method 2: Remove the faulty RAM to resolve this issue, remove the memory modules installed in the computer.

  NOTE: you must leave enough RAM for the computer to start and run Windows.

  For more information on the amount of RAM that is required to run Windows, click on the number below to view the article in the Microsoft Knowledge Base:

  304297 configuration (http://support.microsoft.com/kb/304297/) System requirements for Microsoft Windows 2000 operating systems

  If the error message described in the "Symptoms" section of this article appears again after removing the memory module, remove a different memory module. This procedure may ask you to restart your computer several times to identify the specific memory module that is not working properly.

  For more information about how to add and remove RAM to the computer, contact the manufacturer of your computer or see the documentation that came with your computer.

  http://support.Microsoft.com/kb/318729

  I hope this helps!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• MODULE NOT FOUND ERROR MESSAGE

  TRY TO UNINSTALL NORTON SECURITY 2007-MAKE ERROR SPECIFIED BY MESSAGE MODULE NOT FOUND
  HOW CAN I GET RID OF NORTON SO I CAN INSTALL ANOTHER PROGRAM? GOD, VISTAS SUCKS

  http://Service1.Symantec.com/support/tsgeninfo.nsf/docid/2005033108162039

  Download and run the above Norton removal tool.

  If you continue to have problems with it, contact Norton:

  http://www.Symantec.com/en/AU/Norton/support/index.jsp

  See you soon. Mick Murphy - Microsoft partner

• JVM and Module not found error

  Hello.

  When I run my application, as soon as the Load Simulator shows JVM error 104 ClassCastException, and then tap home screen to eception exception Java.lang.ClassCastException.

  If I open my application I get JVM error 104 but saying RuntimeException, and if I keep a popup says error start MyApp: Module not found net_rim_ui_api.

  I even tried to launch a simple application of HelloWord and get the same errors. Reinstalled the Simulator, still nothing.

  Anyone have any ideas?

  Thanks in advance.

  If you are using the Eclipse plugin, and then you expand the node for the project in the Package Explorer, you should see a library item JRE System, the version of the JRE System why you compile. You can change the JRE version by right-clicking on the JRE System Library, then select "Properties".

  If you use BlackBerry JDE, use the editor that comes with the 4.6.1 distribution JDE.

• Apps of the problem running in the Simulator - net_rim_xml not found.

  I'm starting to do some Java development. I'm under the Simulator in Windows using the JDE environment to see how the code works.  (I normally run Ubuntu as my main OS.)

  I can run all the examples of code very well when my Simulator is a 9500-JDE, but when I switch to a 8300-ATT-JDE - 4.2 I get a message, "the Source code is not available" in the java window not found 'Module 'net_rim_xml_org'. Error starting : Module 'net_rim_xml_org' not found. »

  What happens on a XP (running under VirtualBox) instance and an instance of Windows 7.

  I installed and re-installed the JDE just to see.

  I also googled and not found the answer.

  TIA

  The code is forward but not backward compatible.

  You develop using JDE 4.7 I guess, so you can execute code in 4.7 or higher.

  Develop for a race of 8300 4.2.1 (Simulator or device), you'll need JDE 4.2.1.

• Error: "FATAL: oracleasm Module not found" in Red Hat 6

  Hi all:

  ... OS: Red Hat 6.5 (64-bit)

  I am preparing to install a 12 c CARS in a Red Hat 6.5. When you configure the ASMLib, I got the following error when executing "/ usr/sbin/oracleasm init:

  2 May 18:23:20 oraprd01 modprobe: FATAL: Module not found oracleasm.

  I configure YUM Oracle filing and the package installed the "kmod-oracleasm. And in the link (Oracle ASMLib downloads for Red Hat Enterprise Linux Server 6) I got the packages 'oracleasmlib' and 'oracleasm-support', as you can see below:

  [root@oraprd01 binarios] # rpm - qa | grep oracleasm-i

  kmod-oracleasm - 2.0.8 - 4.el6_6.x86_64

  oracleasm-support - 2.1.8 - 1.el6.x86_64

  oracleasmlib - 2.0.4 - 1.el6.x86_64

  My kernel is:

  2.6.32 - 431.el6.x86_64 oraprd01 Linux #1 SMP Sun Nov 10 22:19:54 IS 2013 x86_64 x86_64 x86_64 GNU/Linux

  My version of Red Hat is:

  [root@oraprd01 binarios] # cat/etc/redhat-release

  Release of Red Hat Enterprise Linux Server 6.5 (Santiago)

  Why am I the above error while trying the oracleasm module init? WHat am I hurt?

  
  

  Thanks in advance.

  Problem solved.

  I installed an earlier version of the kmod-oracleasm (kmod-oracleasm - 2.0.6.rh1 - 3.el6_5.x86_64) downloaded from the customer portal of Red Hat. Now the ASM is responsible.

• Latitude ON "Flash Module" module not found on initialize to top

  I recently reformattedand partitioned my hard drive in order to install Win7 64 bit (installed with Win7 32 bit).  After installing all the drivers, firmware updates successfully and the software, I am unable to access the Latitue feature on.  In addition, at boot or start the Setup application, I get a 'Flash Module not found' error.

  

  Looks like a ready Boost error.

  "first introduced with Windows Vista in 2006 and also included with Windows 7. It works by using flash memory, drive USB 2.0, SD card, CompactFlash or any kind of portable flash mass storage system as a drive for disk cache. »

  Otherwise, it must refer to the Adobe Flash software that would need to be reinstalled.

  Adobe Flash Platform * update Flash Player to support access Flash

  Note: For versions prior to version 10.1 Flash Player, use the support updating mechanism in previous versions of the player (manual download and install from www.adobe.com or ExpressInstall). In addition, the AIR installer manages the necessary updates for Flash Access and does not support the SystemUpdater API.

  
  

• I can not even open FF because the profile is not found, even after using the profile in order to create a new profile.

  I've recently upgraded to version 40 39.0.3. The first upgrade was not so I removed FF using the control panel (uninstall program). I reinstalled again, but I got the messages that FF was already running, etc. as other users have noticed. I open profiles (Open firefox.exe - p) and tried to open FF with the "default" profile that did not work. I created a new profile ("defaultuser") and FF open. (I have the box checked to use the new profile on startup). I have created FF as I wanted it, and then exit. When I started later FF, the profile is not found. The profile did not have the "defaultuser" profile, does not open with the "default" profile, but would a new profile must be created and FF to open and run. Quit FF and reopen produces the same sequence (profile not found, etc.) I uninstalled 40 and reinstalled version 39.0.3 and I have the same problems with this version (39.0.3), plus he's starting the upgrade to version 40, and soon as I complete the installation again. I uninstalled the 39.0.3/40 version and reinstalled 40 using the Profiles page to write this question.

  I removed the version FF 40 using the Panel of control/uninstall. I deleted all the files that have been "* firefox *" and "* mozilla * ' (and there are some). I rebooted, and then reinstalled FF version 39.0.3. I could we FF immediately (without having to create a new profile). I have not had any problems with a bad certificate of Google, Yahoo, etc.. I went to all the web sites open very well. I could restart, then restart FF several times without problems or issues of certificate. Meanwhile, I made no changes to Kaspersky, and as far as I know, Kaspersky works as he usually does. I am almost sure that FF 40 version has a certificate problem that I can't fix. I'm less sure if the original upgrade to version FF 39.0.3 to 40.0.0 (then 40.0.2) played a role in my profile questions. Regardless, I have a version of FF that works and auto-updated to FF is off (and it will remain like that until I gather a few of this blog and other insurance which emits 40 FF are ironed out). I appreciate the help that you (and jscher200 in another thread) has attempted to provide. While the issues are not fixed, the thread can be closed.

• Each file shows '?', which means 'the item is not found.

  A new development, I think, otherwise I have not noticed before: each folder, opening, shows a large '?' in the upper left corner. If I click on it, a message appears, saying: "the item is not found. But the items in this folder are already there, clearly accessible, in this same folder!  What is this whole thing? Can I get rid of the grim question mark in the world "?"

  Michael,

  Since you know that the file is associated to the?, you can remove it from the toolbar. Use (command + drag) and pull downwards to remove it. Then navigate to the folder and use (command + drag) and fold it to the toolbar.

  

• all the site went "not found HTTP 404 error. The requested resource is not found. "and the"Firefox cannot load Web sites but other programs can"page is not helping

  all the site went "not found HTTP 404 error. The requested resource is not found. "and the"Firefox cannot load Web sites but other programs can"page is not help somehow

  One possible cause is security software (firewall, antivirus) that prevents or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • http://KB.mozillazine.org/Error_loading_websites

  You can try to reset (power off / on) of the router.