simple installation in order to develop the bb widget in eclipse

Similar Questions

• Establishment of the database of SSO as part of a simple installation

  Hi all, I am planning my "simple installation" update vCenter 4.1 to 5.1 running on a windows 2008 R2 x 64 machine that will run MSSQL 2005 SP4 32-BIT

  I read in the installation guide in the documentation centre which explains in detail how to configure SSO on the database using the scripts provided with the installation program.  My question is that I'm sure to use these scripts to configure SSO on my MSSQL 2005 database in advance?   That is to say a week in advance, just so that there is less work to come a day upgrade?

  Also, is the SSO OK database to run from my x 32 sp4 instance MSSQL2005?  I know that this database is compatible with vCentre 5.1, but the SSO database is not specifically mentioned.  I guess it is.

  See you soon,.

  Matt

  cjscol is correct. The compatibility guide applies to SINGLE sign-on for the same parameters as vCenter Server 5.1.

  You will find the necessary scripts to set up the database on the installation media in the folder of Single Sign On. You have to pay attention, as there are unnecessary scripts in there too.

  You just want to use the setuptablespaces and those setupusers in that order. Do not use the createschema one because it will stop the installation because the installer expects not to find a pattern even on a database prepared.

• How can I cure registry in order to remove the installer of free ride games

  How can I find my healing of registry in order to remove the free ride games

  Tried contacted the team of software support "free ride games? They would have a better idea of the installation/uninstallation of information.

• installation of vRA 7.0 database fail the simple installation

  I'm doing a clean install of vRA 7.0 with the wizard and selcting the simple installation with DB external. DB is created during installation.

  The Installation fails after a certain time the part of the database running with an error message:

  < servername IAAS > (SQL Server: < SQL Server name >) database has failed

  Output from the command

  Message:

  VRealize Automation server configuration error. For more information, see vCAC - Config.log after collecting newspapers IaaS.

  Description:

  Output:

  Download the installer...

  Runtime: 00:02.625

  Successful download.

  Installation of the files Server Custom vCAC disk Setup program

  "Run: 'C:\Users\ < username > \AppData\Local\Temp\VMware\vCAC\\vCAC-Server-Setup.exe' / s/w/v" / qn ADDLOCAL = Database INSTALLDIR = \ "C:\Program Files (x 86) \VMware\vCAC\\Server\" /Lvoicewarmup! Files \"C:\Program (x86)\VMware\vCAC\InstallLogs\Server-Setup.log" ")

  vCAC Server Custom Setup successful Installation, ExitCode:0

  Runtime: 00:17.231

  Configuration vCAC IaaS main components:

  -Database

  Execution: 'C:\Program Files (x86)\VMware\vCAC\Server\ConfigTool\\vCAC-Config.exe' / s ' / P:C:\Users\ < username > \AppData\Local\Temp\VMware\vCAC\\ConfigToolProperties.vCAC-Server-Database-ConfigTool.xml "" / L:C:\Program files (x86)\VMware\vCAC\InstallLogs\vCAC-Config.log.

  vCAC-Server-Custom-database - ConfigTool Installation Failed, ExitCode:5500

  VRealize Automation server configuration error. For more information, see vCAC - Config.log after collecting newspapers IaaS.

  Runtime: 00:09.129

  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  vCAC - Config.log:

  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  2016-01-11 12 01 38 222: = logging started the 2016-01-11 12 01 38 206 =.

  2016-01-11 12 01 38 222: product version: 7.0.0.5833.

  News: 2016-01-11 12 01 38 269: initialization of the functionality of database configuration property. Node Lu DATABASE_INSTANCE.

  Initialization of the functionality of database configuration property. Node read DATABASE_NAME.

  Initialization of the functionality of database configuration property. Node Lu DATA_PROTECTED.

  Initialization of the functionality of database configuration property. Node Lu DATABASE_DATA_PATH.

  Initialization of the functionality of database configuration property. Node Lu DATABASE_LOG_PATH.

  Initialization of the functionality of database configuration property. Node Lu WINDOWS_AUTHEN_DATABASE_INSTALL_FLAG.

  Initialization of the functionality of database configuration property. Node Lu DATABASE_INSTALL_SQL_USER.

  Initialization of the functionality of database configuration property. Node Lu DATABASE_INSTALL_SQL_USER_PASSWORD.

  Initialization of the functionality of database configuration property. Node Lu PRECREATED_DATABASE_FLAG.

  Initialization of the functionality of database configuration property. Node Lu CREATE_MSSQL_AZMAN_STORE_FLAG.

  Initialization of the functionality of database configuration property. Node Lu DATABASE_USE_ENCRYPTION.

  News: 2016-01-11 12 01 38 379: execution of C:\Windows\Microsoft.NET\Framework\v4.0.30319\MsBuild.exe "C:\Program Files (x86)\VMware\vCAC\Server\Database\DeployVMPS.xml' /t:BuildDB p:UsePreCreatedDatabase = 'False' p:DBServer ="< SQL Server name >" DBName = "DB <>name" /p:DBUser = "" /p:DBPassword = * "

  News: 2016-01-11 12 01 38 677: version of Microsoft (R) Build Engine 4.0.30319.34209

  News: 2016-01-11 12 01 38 677: [Microsoft .NET Framework, version 4.0.30319.34209]

  News: 2016-01-11 12 01 38 677: Copyright (C) Microsoft Corporation. All rights reserved.

  News: 2016-01-11 12 01 39 147: Build started 11.01.2016 12:01:39.

  News: 2016-01-11 12 01 39 633 'C:\Program Files (x86)\VMware\vCAC\Server\Database\DeployVMPS.xml' project on node 1 (Target BuildDB.

  News: 2016-01-11 12 01 39 633: BuildDB:

  News: 2016-01-11 12 01 39 633: #BuildDB # create and populate the database

  News: 2016-01-11 12 01 39 648: sqlcmd-s < servername SQL >-i CreateDatabase.sql - v DBName = '< name >' DBDir = "------." LogDir = "\." b

  News: 2016-01-11 12 01 45 025: creation of database '< DB name > '.

  News: 2016-01-11 12 01 45 025: newspapers directory and database SQL default database

  News: 2016-01-11 12 01 45 025: definition of SQL 2008 database compatibility level.

  News: 2016-01-11 12 01 45 025: deactivation of the full text search.

  News: 2016-01-11 12 01 45 025: setting parameters of database.

  News: 2016-01-11 12 01 45 119: run CreateDatabase.sql.

  News: 2016-01-11 12 01 45 151: sqlcmd-S < servername SQL > d '< name DB >'-i VMPSOpsUser.sql - v = "<>username" ServiceUser UseWindowsAuthentication = 'True '.

  News: 2016-01-11 12 01 45 480: run VMPSOpsUser.sql.

  News: 2016-01-11 12 01 45 825: project 'C:\Program Files (x86)\VMware\vCAC\Server\Database\DeployVMPS.xml' (1) built 'C:\Program Files (x86)\VMware\vCAC\Server\Database\Liquibase.xml' (2) on node 1 (Target RunLiquibase.

  News: 2016-01-11 12 01 45 825: RunLiquibase:

  Info: 2016-01-11 12 01 45 825: ' \bin\java.exe»-Djsse.enableCBCProtection=false-Djava.library.path="C:\Program files (x 86) \VMware\vCAC\Server\Database"-cp "liquibase.jar; "jtds - 1.3.1.jar ' liquibase.integration.commandline.Main - driver = net .sourceforge .jtds .jdbc .driver - url = jdbc:jtds:sqlserver: / / < servername SQL > / '< name of DB > '; SSL = request releaseLocks

  News: 2016-01-11 12 01 45 840: the system cannot find the path specified.

  News: 2016-01-11 12 01 45 840: C:\Program Files (x86)\VMware\vCAC\Server\Database\Liquibase.xml(28,5): error MSB3073: the command "" \bin\java.exe»-Djsse.enableCBCProtection=false-Djava.library.path="C:\Program files (x 86) \VMware\vCAC\Server\Database" "-cp"liquibase.jar; "jtds - 1.3.1.jar ' liquibase.integration.commandline.Main - driver = net .sourceforge .jtds .jdbc .driver - url = jdbc:jtds:sqlserver: / / < servername SQL > / '< name of DB > '; SSL = application releaseLocks' came out with code 3.

  News: 2016-01-11 12 01 45 856: construction project is "C:\Program Files (x86)\VMware\vCAC\Server\Database\Liquibase.xml" (RunLiquibase target - failed.

  News: 2016-01-11 12 01 45 887: construction project is "C:\Program Files (x86)\VMware\vCAC\Server\Database\DeployVMPS.xml" (BuildDB target - failed.

  News: 2016-01-11 12 01 45 887: Build FAILED.

  News: 2016-01-11 12 01 45 887: "C:\Program Files (x86)\VMware\vCAC\Server\Database\DeployVMPS.xml" (target BuildDB) (1)->

  News: 2016-01-11 12 01 45 887: "C:\Program Files (x86)\VMware\vCAC\Server\Database\Liquibase.xml" (target RunLiquibase) (2)->

  News: 2016-01-11 12 01 45 887->:(RunLiquibase target)

  News: 2016-01-11 12 01 45 887: C:\Program Files (x86)\VMware\vCAC\Server\Database\Liquibase.xml(28,5): error MSB3073: the command "" \bin\java.exe»-Djsse.enableCBCProtection=false-Djava.library.path="C:\Program files (x 86) \VMware\vCAC\Server\Database" "-cp"liquibase.jar; "jtds - 1.3.1.jar ' liquibase.integration.commandline.Main - driver = net .sourceforge .jtds .jdbc .driver - url = jdbc:jtds:sqlserver: / / < servername SQL > / '< name of DB > '; SSL = application releaseLocks' came out with code 3.

  News: 2016-01-11 12 01 45 981: 0 warning (s)

  News: 2016-01-11 12 01 45 981: 1 error (s)

  News: 2016-01-11 12 01 45 981: 00:00:06.74 time

  the key here is:

  ------------

  News: 2016-01-11 12 01 45 840: the system cannot find the path specified.

  "News: 2016-01-11 12 01 45 840: C:\Program Files (x86)\VMware\vCAC\Server\Database\Liquibase.xml(28,5): error MSB3073: the command""\bin\java.exe" -Djsse.enableCBCProtection=false-Djava.library.path="C:\Program files (x 86) \VMware\vCAC\Server\Database"-cp "liquibase.jar; "" jtds - 1.3.1.jar ' liquibase.integration.commandline.Main - driver = net .sourceforge .jtds .jdbc .driver - url = jdbc:jtds:sqlserver: / // ''; SSL = application releaseLocks' came out with code 3.

  ------------

  which means, Java is not installed/set up correctly or not accessible for the user is installing.

  You need:

  64-bit JRE (not x 86) installed on the Windows machine and successfully added to JAVA_HOME of the computer, so that each user (or at least, the user that ins Setup) to run java.

  A reboot of the windows machine may be necessary after installing java

  The wizard is supposed to handling everything, but something is wrong in your case.

• Problems with the installation or after a simple installation of vSphere Hypervisor

  Hello

  I'm just testing vSphere hypervisor and went through the VirtualCenter installation program. I made the simple installation. I recently had a class on the hypervisor, so I thought I would give it a shot with a testlab. So far, turn not 100% great. After the simple installation on Windows Server 2012, I'll log on to the device of vCenter Server (5480) and get "this webpage is not available". It seems that I can't access anything that has to deal with vcenter server. The only thing that I know that I can access is the vSphere Web Client to manage hosts, in which he tells me to connect to vCenter server...

  I have install it on 1 virtual machine. Any suggestions? Please tell me if you need more information.

  Community of VMWare YOU thanks.

  Have you tried to access the vCenter Server by using its URL with port 9443 and the username that I mentioned in my previous answer?

  André

• Cannot install CS5.5 on Mac Yosemite: the installer is an unidentified developer. [was: I just bought a new macbook]

  I just got a new macbook I want to download my copy of CS5.5 on. It doesn't have a section of disk insertion so I downloaded CS5 on adobe site. However, I can not install it because my computer says the installer is an unidentified developer. Can you help me please?

  It's Apple OS x keeper kick.

  Control + click on the downloaded file and click open to inform manually OS X that you approve the file and it's OK to open it.

• How to set the display in order to run the installation program

  Hello
  
  Could you please explain how to set the Display variable I connect via the VNC client directly to windows X Linux (Gnome)
  in order to run the installer to install R12 EBS?
  
  
  I guess that since the connection is by VNC client, so I just need to open a terminal window and start the Installation...
  
  
  
  Thanks and greetings
  MZ

  Srini Chavali wrote:
  The DISPLAY variable must be set to the IP address of the client.

  Not necessarily - it is meaningless to set the DISPLAY of different client IP addresses if you want to run the installation program (or any GUI) on the server of different customers.

  Thank you
  Hussein

• OK, I have a legal copy of vista Home premium with service packs and updates from microsoft and want to start clean with a clean installation I do not have the original, only recovery and put installation disc at level Express disc?

  OK, I know that this may be simple for most, but I have an of a moment _ this find.  As I said legal copy that has been saved... I backed up all my files on DVD, I don't care if I lose all the programs that I can always download them later.  Basically I want is that it was when I brought home the first time.  I searched high and low for the original disc of Vista but no luck.  I do not have people upgrade at any time, but I was not able to find a definitive answer about it online.  Not too complicate it again but I have 4 GB of ram and processor can run 64-bit, and I have 32-bit curently I'm sure you know where I'm going with that.  I know a little about how to do it, but want reasurance and direction from someone who knows hit safe and ready to help.  Any person who get end to this nightmare for me will be really appreciated.

  Shaun

  Contact the manufacturer to obtain a set of recovery discs original (for a fee) and use them to make the initial installation.  Activate it.  Then you can do the upgrade and activate that.  You must install the original operating system in order to install the upgrade.  If you are going from 32 bits to 64 bits that cannot be done with an upgrade - which requires complete and clean installation.

  Here is the Microsoft policy on replacement software; http://support.microsoft.com/kb/326246.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How make a list to "develop the shortcut"

  Hi, I'm using the develop and I accidentally did something... (I think that "order /") and now there is a list of 'Developing the shortcut' which will not disappear. And he keeps me editing.  Anyone know the shortcut for hide this list?

  Thank you!

  I just thought about it! It's pretty simple. Just click on the page and it will go away!

• Installation and first run of the FF, I get a box that obviously requires a response, but it contains no words, and does not occur when you click it.

  Installation and first run of the FF, I get a collection box that is displayed for about 5 seconds after the program loads and displays the first screen. It obviously requires a response, but it contains no words. The box doesn't cause any Word show either. the screen takes over and no other button cannot be clicked: I have a hardware failure on FF.

  Empty the gray bar, box, box white, question mark?

  This irritating box was related to an add-on for AOL. In order to remove the extension of the problem, you will probably need to start Firefox in Safe Mode so that it does not work.

  You need to close Firefox anyway, you can, for example:

  • ALT + F4
  • Right click of its mosaic on the taskbar > close all windows
  • (Ctrl + Shift + Esc) Task Manager

  To start Firefox in Safe Mode, hold down the SHIFT key while double-clicking the shortcut.

  A small dialog box should appear. Click on 'Start mode safe' (not update).

  Then you can go to the Add-ons page using either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then on the right, locate AOL.

  A little luck?

• Wizard BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  How is it assistant BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  This has two questions:

  1 capacity of SSDS faster for Fusion drive has been reduced. Therefore less effective for the reader of the merger. For example if I need to create a partition of 80G for my windows bootcamp partition, only 48 G will be left in the drive of the merger.

  2. ability of the bootcamp windows partition becomes very limited, cannot be greater than 120 G.

  3. even when I try to fuse out of the drive of fusion in the 128 G SSD and 3 TB of HARD disk, and then run the BootCamp assistant to create the bootcamp partition start from scratch to reinstall El Capitan only on the HARD drive (without drive Fusion), it won't let me do anything, it just shows an error that says something like "a person has created additional partitions on this drive please select. another disc. But there is nothing else to choose.

  Before my (5 K, 27 inches, end of 2014 retina) to El Capitan Yosemite, I was able to use the previous version of the wizard BootCamp 5.x to create the partition, bootcamp on the drive of the merger. And it will be divided in the fuser unit in two and insert the Bootcamp partition (with the size I chose, which can go up to 1 TB) between two partitions of MAC OSX.

  The disk partitions resulting from it, will be the partition MAC OS x on the SSD, the partition MAC OS x on the HARD drive partition #1, partition MAC OS x on the HARD drive partition #3.

  Then there is the BootCamp partition on the HARD drive partition #2.

  Is there a way to get what I need?

  That is what has been described in this notice of two canoes?

  Installation of Windows on a Boot Camp partition on a drive of TB Fusion 3

  n-on-a-3-TB-fusion-drive http://twocanoes.com/Winclone/support/installing-Windows-on-a-Boot-Camp-partitio

  Thank you.

  After having worked on those weeks, I realized that I need very painfully (by first going back to Yosemite and bootcamp 5 to escape all the limitations of El Capitan and BootCamp 6) I want to share here. Someone at - it other smarter solutions welcome.

  Note these steps and mentioned drivers only work for my version of iMAC, retina 5K late 2014. If you have other material, please search on the web to see which driver will work first. And all of these steps are destructive and assumed that you first take backup. It is only shared for interest only. Readers will have to bear your own risk.

  A. take backup

  1. take a backup completes my iMac Fusion Drive using Time Machine. Then restart with a Yosemite USB installation and select Terminal from the menu on the top bar.

  B. fuse out of the merger in two physical disks drive: SSD + HDD

  1. in the terminal, type the commands in show what the logical volume group ID and the ID of the logical Volume of the disc fusion)

  Cs diskutil list

  2. in the terminal, type commands for the fuse of the fuser unit and separate them to an SSD and a HARD drive.  Note: All data will be destroyed in the drive of the merger. There are many articles in this community on how this could be done,

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  This should finish within 30 minutes. If you have taken more time, this means that your reader of fusion has been altered somehow.

  I hit this issue too.  To use this command to remove the fusion drive hung up, and I need to do the hard to scramble a few sections of data in the hard disk partition table using the controls to tell the OSX this hard drive is a new without partitions:

  Cat >/dev/random /dev/disk0 (where/dev/disk0 is the SSD)

  and repeat for disk1/dev/disk1 which is the HARD drive in my case).

  This command will not return anything, but expect to press Ctrl-Z to end after 1 minute.

  2 create independent partitions (non-fusionend) for the installation of OSX.

  Borne Terminal output, and select disk utility, in disk utility, select the drive to HARD disk (and not on the partition), you will see the error message and you will be asked if you want to fix the fuser unit, click on ignore. Then wipe the HARD drive to create a single 'extended OSX journaled"named"HARD drive".

  3. Repeat step 2, and then erase the SSD drive to create a single 'extended OSX journaled"named"SSD ".

  C. install on the HARD disk as drive didier autonomous not fusion.

  1. go to Yosemite install screen and proceed with the installation of a clean copy of Yosemite to the iMAC. then connect you.

  D. use BootCamp Yosemite f5 to install windows.

  1. launch Yosemite bootcamp.

  2. check the two checkboxes for creating the USB drive to install windows 7 or a later version, and to download the windows supports the Apple software.  Do not click on the last box to install or remove windows pie creating real bootcamp partition again.

  3. it may take several hours to complete this function of your internet b/w and also performance of your USB drive.

  4. If you install Windows 7 (like me), then the downloaded drivers will not work for you, this will cause the issue of the device driver appleDSS.sys does not like this driver and others are too recent for windows 7 to use.  Also, your keyboard and mouse may not work even if you try to plug in a USB external keyboard or a mouse. You need to replace the drivers downloaded by others (the Boot Camp 5.1.5769 drivers that I find in this link: Software Support of Boot Camp 5.1.5769.) (Note: this driver is material specific only works for my iMAC model).  Once you have downloaded it, copy the two files in the root directory of the USB installation to replace the original ones. It's specific and material available for download somewhere on the Apple Site.

  -From the Finder, delete the $WinPE$ and the Boot Camp of the FLASH PLAYER files.

  -Expand the old drivers for Boot Camp 5.1.5769 (two records and another file) on your desktop.

  -Copy the $WinPE$ and records of Boot Camp in the FLASH PLAYER.

  5. open Boot Camp Assistant again and only select the third option, install Windows 7.

  It will show you the screen to select what installation disk, select HARD drive.

  Then drag the slide bar to select the size of the Bootcamp partition for windows you want, knowing that there is a restriction for windows installed using training camp on a MAC that the last byte of the BootCamp partition must reside in the first byte of the 2.2 T of each physical hard drive.

  For my case, I need only 500G for bootcamp and leaving behind 1.7 to for my MAC OSX partition immediately after the bootcamp partition and an another 0.8 T MAC OSX partition after him. 1.7 TB and the partition of MAC OS x 0.8 TB well exploited in the meantime bootcamp partition, will be merged into a fusion drive by Bootcamp. Thus, you will end up with total 2.5 TB of disk space in a logical drive - fuser.

  Go to this link for more details on this subject: n-on-a-3-tb-fusion-drive http://twocanoes.com/winclone/support/installing-windows-on-a-boot-camp-partitio

  6. continue the process to partition the hard drive, then it will restart automatically in windows installation mode, install windows.

  7. once the installation is complete, check that windows is functioning correctly.

  E. Si you want to upgrade to windows 10 Windows 7.

  1 if you plan to upgrade to windows 10, you'll find that the windows IE v.8 7 is no longer works and had many problems to load the page.  Then when you try to download the latest version of Internet Explorer, you get an error that you need at least windows 7 SP1 to support the last IE.  Life is too complicated, just download the google Chrome browser, then search for download windows 10 and then run the Microsoft valuation tool to upgrade.

  2 but before upgrade you, unplug all your MAC USB drives, otherwise, you will find that, after having spent an hour downloading the windows 10 software, the upgrade will fail with the error "/ dynamicupdate...» ». It is an inexplicable mistake that no one seems to understand why. There are articles with proven results that the removal of all USB drives before running the windows 10 upgrade tool will correct this problem.

  F. reinstall OSX El Capitan

  Once your target windows system (if windows 7, windows 8 or windows 10) works very well.  You can continue to create again your Fusion drive and reinstall OSX El Capitan.

  1. Insert the install of OSX Yosemite rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type the command 'diskutil list cs' and you should see nothing to prove that there are no existing fusion drive yet.

  6 type the 'diskutil list' command to list all disks and partitions.

  The SSD has two partitions, the/dev/disk0s1 of EFI (209 MB) partition and the other/dev/disk0s2 of OSX partition we created in step B above, called SSD around 121 G.

  The HARD drive has two partitions, the/dev/disk1s1 of EFI (209 MB) partition and the other/dev/disk1s2 of OSX partition we created in step B above, called SSD.

  G. delete the logical storage of nucleus on the HARD disk drive and it refuses with the DSS to form a merger with faster performance disc

  1. Insert the install of OSX El Capitan rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type orders for (to show what are the logical volume group ID and the ID of the logical Volume of the logical drive). You should see the logical volume to basic storage group created using two partitions on the hard drive, 1.7 TB and TB 0.8 created when we run the Yosemite Bootcamp to install windows.

  Cs diskutil list

  6. in the terminal, type commands to delete logical drives from basic storage.  Note: All data will be destroyed in the logical drive.

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  7. tap "diskutil list" command lists all the resulting partitions. You should see that the HARD drive has the following partitions.

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS GB SSD 121.0 disk0s2

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_HFS 1.7 Untitled TB disk1s2

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 503.0 GB disk1s4

  5: Apple_HFS 801,4 Untitled GB disk1s5

  8 type the following commands to create the logical volumes group, named "myLVG" (or the name) of fuser using the usable for OSX to the SSD and HDD partitions.

  diskutil cs to create "myLVG" disk0s2 disk1s2 disk1s5

  Note: Mark the group id of logical volume shown in the results.

  In my case, I want to book the last partition as standalone partition disk1s5 no-fusionend, so I can use it to raise the back, or format it in FAT32 to allow the exchange of data between the MAC and boot camp.

  So, I do not understand this last partition in the drive of the merger. in my case, the command that I used is: diskutil cs to create "myLVG" disk0s2 disk1s2

  9 create logical volumes named "Macintosh HD" (or you call it) on the logical volume group we just created for the reader of the merger.

  diskutil createvolume logical volume group ID jhfs cs + 'Macintosh HD' 100%

  10 command "diskutil cs type list" to check the resulting fusion drive created.

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group F53C7A25-C2F3-4997-91E9-2E6B6BAB2E0E

  =========================================================

  Name: LVG

  Status: online

  Dimensions: 1815635525632 B (1.8 to)

  Free space: 90112 B (90.1 KB)

  |

  +-Physical volume E176873C-7C80-4759-8110-BA7307E0C4B3

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-Physical volume 6535AC3C-DCF8-453F-AD47-98905538386E

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk1s2

  |   Status: online

  |   Dimensions: 1694646673408 B (1.7 to)

  |

  +--> Logical volume family F3D15F87-FB84-4B43-B2F2-E9EACC7C42D9

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume 0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  ---------------------------------------------------

  Disc: disk2

  Status: online

  Size (Total): 1809780178944 B (1.8 to)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  11 exit the terminal, go back to OSX El Capitan install screen and select the name of the fuser unit 'Macintosh HD' proceed to begin the installation of the os x for installation.

  12. There will be a step in the installation ask you if you want to configure as a new computer, or restore from a time machine previous backup. Make your own choices it accordingly.

  13 once OSX El Capitan has been installed and you have finished restoring the data and custom configurations, you can enter the application of preferences to check if you see the icon of the "Startup" disk", and if you choose Startup BootCamp in the next reboot, you should be able to boot up to Windows without pressing and holding the button option when reboot and choose to start windows manually. Also, in windows, you should be able to click on the bootcamp Control Panel and select for a startup to OSX on the next reboot.

  14. one thing to be aware, if you install bootcamp in this way, the boot camp and the GUI utility disk in OSX El Capitan will not be able to adjust your settings. This means, if you need to touch anything or to readjust the size of the partition, you will need to do it again in step A. Alternatively, some how to get started with installing Mac OSX Yosemite USB, then adjust the partitions using similar commands shown in this article or other articles in this community.

  15. yet once please take personal responsibility on damage if you follow the instructions in this article.

• How can I get the installer for my application check the operating system type and then install the correct driver type?

  I have a request that I wrote and have been use and distribute for awhile. The installer I created for this application is an additional installer to install a driver for the USB connection. The USB connection is actually a virtual COM Port. The problem is that the people who drafted modified driver setup the installation program itself. They used to have an installer that would check for 32-bit or 64-bit OS and then install the appropriate driver.

  Now, they have two distinct installation programs: one for the other for 32-bit and 64-bit. They let the user know their OS and install the appropriate driver. I'd rather not have to rely on my users to do. From what I've seen the creater Installer provides that an executable to be run after the application installs.

  Is it possible to have the installer of the application, check the type of OS and then run the correct executable file after installing my application? I think that I could write an Installer 'wrapper' that checks the type of operating system then executes the correct Installer. But I expect a better solution.

  Thank you
  Joe

  So, I make it work!

  The trick is to find a way to determine what type of OS you are using. The method I used was, indeed, read the environment variable. A buddy of mine sent me this link:

  http://StackOverflow.com/questions/2401756/how-to-find-if-the-machine-is-32bit-or-64bit One of the phrases he bibliography the Processor_Architecture environment variable.

  It seemed like a reasonable idea. So I started to research how read LV it environment variables turns out, you do it by reading a registry key. There is an example of LV on how to read a registry key. But I did not know where they are in the registry. So, I searched the Processor_Architecture registry. I found it in HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Session Manager\Environment.

  According to the article in the link, this value will already be x 86 for a 32 bit OS, or something with 64 inside. I just check the response for x 86 string. If it is, I just run the x 86 version of the driver Installer. Otherwise, I run the x 64 version.

  It turned out to be as simple as that.

  I hope this helps someone.

  Joe

• error code 80070490, installation disc, and company did the door is no longer this computer

  I know that this problem has been addressed several times, but I can't find an answer that can help me.  Bought my Dell Inspiron from Staples in 2008 and it came with the installation disc.  Staples is no longer wearing my computer and have not been very helpful with previous problems.  I sometimes get the updates installed, but since 16/01/09 updates, most have failed.  I was wondering what are the options with regard to getting this fixed a problem I had.

  Thank you very much
  kerridia

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us

  Recovery media is obtained from Dell, no staples.

  Dell recovery Partition Recovery:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  This is how to perform a recovery of Dell, if you have a Dell recovery partition on your hard drive.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/958044

  'You receive a "0 x 80070490" error code when you use Microsoft Update or Windows Update Web sites to install updates'

  If the above does not resolve the problem:

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  I have already indicated at the beginning of this answer on how to access the info about the recovery Partition, if you have one (what you should do)

  How to get Vista recovery Media.

  There is no Vista free download legal available.

  Call Dell and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Why my product key not valid with an installation from another CD as the original?

  I had to reload a fresh install of Win XP on a Toshiba laptop. Given that the previous owner had lost the CD; I took one I had at home a try to install it on my laptop with laptop computer product key stuck under the laptop. but when I try to install said that it is a key of product not valid. This is false because before to format the laptop, it had windows XP installed with this product key and it worked fine. I sort of... ending up with the fact that the installation needs a corresponding product key... Am I wrong? If Yes, what can I do if I want to use my laptop product key and I don't have the Original CD of Installation?

  Thank you!

  You have installed using the installation XP bad disc. XP installation disks are related to the version of the operating system and the type of installation for each particular product key. You need to install either with the recovery media OEM Toshiba (best solution, solved by ordering the recovery disc from Toshiba for a little money - usually less than $30) OR a generic OEM installation disk for the version for installed XP (Home/Pro/Media Center).  If you use a generic OEM installation disc, then you will enter the product key for the thumbnail of the laptop. If you use a generic OEM install disc, then you should go to the Web from Toshiba site and download/install all the drivers and utilities for this laptop model. There is always a ton of them.

  To contact Toshiba support, buy recovery disks, do an install clean/restore factory with these discs. You won't need to enter a product key if you use the restore disks.

  MS - MVP - Elephant Boy computers - don't panic!

• I try to use windows excel for windows vista and am asked for a product key. How can I find out what order to use the product?

  I try to use windows excel for windows vista and asks me to enter a product key. I am the sole owner of the computer but have no installation CD for recharge Excel. How can I find out what order to use the product? From now the product doesn't let me do anything. Help, please!

  Hello

  Did you pay for Office (including Excel) in a packaging separated when you bought your computer?

  Office is not included with your purchase of computer for free.

  Most new computers come with a trial version of Office that lets 'x' number of days usuage.

  After this test times out, you will have to buy Office.

  And the product key on the computer case or laptop for the operating system, not for the desktop Suite.

  Here is the link for the Microsoft Store to Office products:

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Office_Category_Page?ICID=Home_4up_1_OfficeCatPage

  And you might be interested in the free Open Office Suite of Office Applications.

  http://www.OpenOffice.org/

  For any other question about Office, please repost in the Office Forums:

  http://answers.Microsoft.com/en-us/Office

  See you soon.