Simple Question - thinking of buying the new video card - HPE Pavillion H8 1020-
I think to buy an AMD Radeon R7 x 260, is my PC (HPE Pavillion H8-1020) compatible with this card? I'll be able to simply switch to him?
Hello
Some variants of the R7 AMD x 260 can run and others may not work. Contact Sapphire and investigate who have need for a model no UEFI that supports of four monitors (by you in other post). You will also need a 500 Watt power supply.
Tags: HP Desktops
Similar Questions
-
Pavilion Slimline s3120N will not recognize the new video card
I can't get my computer to recognize and use a new video card. I tried 3 cards (GeForce 8400GS... cards 2different and Radeon HD 4550). The computer continues using the onboard video. For each card, I did the following:
Go to configuration, advanced and changed the main graphics card 'on board' to 'PCI-E '.
Saved and let the computer start.
Stop and insert the new video card into the PCI-E slot
Start the computer and installed the latest driver
Computer restarts
No matter what I do, it always uses the embedded video. I am running Windows 7 Home Premium. How can I use the PCI-E slot/video card? Any suggestions?
I think that your problem may be the power supply unit (PSU). The video card that you have installed require a minimum of 300W/350W. The power supply of your computer is perhaps only 180W; 220W at the most. You can check by opening the case and by reading the label on. It's just too much difference for the card to function properly.
-
H8 1241: problems with the new video card on h8 1241
OK, I've seen a lot of posts on this topic, but I couldn't find anything yet. I bought this computer as a windows 7, but have just upgraded to windows 10. The stock video card HDMI port came out, so I ordered an ASUS Geforce gtx 750ti to replace.
http://www.Amazon.com/GP/product/B00IB9P1KG?PSC=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
When I try to boot with the new card I get the blue screen that tells me to Press esc to get into the BIOS, but it is freezing it (I am not able to get into the bios).
Currently, the only way to make changes are re - insert my old card. I can not even start without secondary card by using the on-Board (which could as a result of the changes that I made in the BIOS). Most of the solutions I've seen involved changes in version 8 of the BIOS but I can't get that. I tried to update my BIOS to the latest version for windows 7, but I don't think it worked b/c I am on windows 10 now.
Help, please!
Hello
The level of your PC motherboard BIOS is not compatible with the cards NVIDIA GXT 7xx series.
Contact ASUS to obtain redress. ASUS has maybe a video BIOS update or a different graphics card that will work in your PC.
A NVIDIA GTX 660 new or used may be your best bet.
Thanks for posting on the forum.
-
Computer does not start with the new video card
Hello
I have hp pavilion 500-277cb and I love it, but it won't work with my new video card
The video card is
Sapphire ATI over-pants 2460I heard 6 beeps and I turned off safe and active start legacy. It does not beep, but it is not start either, just black screen.
It seems to me to have the latest version of the bios and windows 8
What can I do else?
Thank you very much
Best,
Korhan
Hi JM,
Did you remove the Intel HD graphics drivers prior to installing the ATI graphics card?
Your PC comes with one of the following built-in Intel graphics drivers:
- Graphics Intel HD 4400 (GT2)
-
I have a HP Pavilion m7500y PC running Windows XP. I would like to install a new video card to display on both monitors. Installing a video card is possible with this machine? The card I have has a VGA, HDMI and a DVI input connection. If possible, do I need anything special to install and use this card? Thank you for your help.
I wouldn't worry the food until the video card is selected. Decide if a new power supply is needed. Many new cards high power have a 'special' which will have all the power supplies. According to the map, adapters for power fittings may come with the card. A respected power supply name is Cosair, Antec, or Thermalake, but many are just as reliable at the best prices.
-
310 - 1125y in expansion with the new video card?
I have a HP all-in-one TouchSmart 310-1125y and would like to know if this PC support the installation of a new video card. It comes with an integrated ATI Radeon HD 4270 support. I did some research and have the impression that this PC is not particularly expansive. Thanks in advance for your help.
Here are the specifications of your desktop HP TouchSmart 310-1125y and its custom Quanta DA0NZ2MB6A0 (HP Aronia) motherboard. According to the specifications, there is no provision for the installation of a new video graphics card.
Frank
-
Windows XP Home Edition. Motherboard ASUS P4PE. (Old) NVIDIA geforce4 TI 4400 failed - video card replaced by Prowler Radeon 7000 64 MB agp (Mad Dog). The black screen with the old card and bought a new one. At out the old card and installed a new. Start the computer and graphics were. With Nvidia drivers installed, display settings could be changed. Device, 'Monitor' Manager showed now default monitor instead of good Sony monitor. Remove all drivers video and rebooted. Screen "new hardware found" appeared, but I couldn't get the new drivers loaded. I inserted the disc by the manufacturer, but the pilots has not can be detected. Has attempted to launch "Setup" on the disc, but received a material not found error message. Yellow mark points to "Other devices" and the hyphen "VGA Display adapters". No 'monitor' in Device Manager. Tried to turn off the windows firewall and Virus software. I tried windows update. Still have a problem. What's wrong?
The old drivers must remove the first test pilot seeper guru3d.
The nvidia Setup program should find the material but otherwise download the latest version of the software from their Web site. They must be the pilot, right down to the revision number, not only the model number.
-
Where can I buy a new video card for my Alienware M17x R3?
Hello
I have a videocard of 660 m which seems to now be on his way. To make a long story short - it seems to be appearing and disappearing from my device manager. I have two OS on my system, and it does not show even in the other when it becomes capricious.
in any case - where can I buy a replacement? If I have to spend $$ I might as well update if possible. On the forums, I noticed that it is possible to buy one directly from Alienware?
Travis
Hello!
These are available for the M17X R4 video cards:
Manufacturer R11G1
GeForce GTX 660M
HXD3N
GeForce GTX 675M KXXC4
GeForce GTX 680M H0YWF
Radeon HD 7970M You can call Technical Support in your area or send an email to [email protected] (for the United States and Canada only) to check if the parts are available for sale.
-
Put the new video card into m9000 with an edge
I need this m9000 to be able to output to two screens (where the office is extended and the mouse moves between). It has an integrated video card, so I guess I'd need to purchase and install a separate to get this feature. I've never been a video card to a computer that already has an edge - is - how complicated?
Hello
Your PC has only a 350 Watt PSU unless you had replaced him with a bigger power supply. The NVIDIA 450 needs a 400 Watt power supply.
This NVIDIA GT 440 1 GB DDR5 will work with a 350 Watt PSU.
Review the performance of NVIDIA specifications. Look at the specifications of strip memory bandwidth and level of DirectX support.
-
800 - 030qe envy: conflict with the new video card
I bought and installed an EVGA GEForce GTX960 graphics card and discovered a conflict with the SATA cable on the motherboard connector. EVGA has recommended that I find a SATA cable with a connector at right angles. Can anyone suggest a source for a suitable cable? Mine is red (?).
@bobsun2, welcome to the forum.
This is a cable that should work for you.
Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.
-
grayed out with the new video card 3D functionality
Just installed a NVIDIA GeForce GTX 660 with 2048 vram and 3d functionality is not accessible.
You need to go to NVidia Web site and download older drivers for your graphics card.
-
I buy Hp Pavilion p6640d desktop and I want to buy a new video card for games of todays title games. Like Battlefield 3.
I have no plans to replace my power supply 250w, for now. I've got a housing of extension for PCI x 16 - one that is available. I like the Nvidia card. My spec is
Intel Dual core, Pentium E6700 (Wolfdale) 3.2 GHz (65W), Windows 7 Ultimate 32. Guilty of windows 64-bit, 2 GB RAM
- Socket 775, Foxconn EtonL-GL6, model H-IG41-Μatx., Intel G41 Express.
- I also want to upgrade my processor CPU... eventually.
- Thank you.
Hello
If you intend to play good games with the addition of a new card, I do not recommend upgrade you the PSU, because if you want also to upgrade the processor later, is better that you update now the power SUPPLY first, not the video card and then the power supply. That's what I recommend to you, think of the power consumption of the additional card.
You think that your system works well because it is now, but you have an integrated card, adding a map, it will take x amount of Watts, so to be on the safe side, I recommend PSU upgrade first.
In any case, that's what I recommend you on NVIDIA:
GeForce GT 610, (29Watts)
GeForce GT 620, (49Watts)
GeForce GT 630, (65Watts)
GeForce GT 640, (65Watts)
Hope this helps you.
Thank you
-
So I installed my Mac at El Captian & annoyingly my version of VMware fusion (5.0.3) is no longer supported and will not open.
Even more annoyingly VMware fusion offer upgrades to the new version for those who use the version 6 or later.
In any case, big question if I buy the new version is there a way I can still access my current setup?
Would like if someone could let me know. I am self employed & I've got software out there that are vital for work :/
Hello
Welcome to the VMware communities forum.
There is no problem with the Fusion 8 recognizing of your virtual machines to Fusion 5 (or more), it will go just pick up where you left off.
There are a few borderline cases, as it officially you should have your virtual machines closed and not suspended and preferably without clichés before upgrading to a newer version of the merger. However, in practice I saw real topics with that either.
Note that it is recommended to backup your virtual machines before going any further. Do this by copying them to an external drive (not dependent on time machine for backups of virtual machines) and then disconnect the drive.
You can start using on Fusion 8 for 30 days trial period, simply download it from here:
Try VMware Fusion or Fusion Pro. Run Windows on a Mac without rebooting.
Once it works as you want, simply assign the license to the merger to change it in the full licensed version.
Hope this helps,
--
Wil -
Additional memory added, installed the new video card...
Reboot a windows XP user name screen. any user identified.Can you achieve Alt + Ctrl + delete twice and connect with the classic login?
-JW -
New video card, what parts of the software should I install?
Hello!
I just built a new computer for a customer who is a photographer. For the best possible performance with the new video card NVIDIA GTX 760 and Photoshop CC, what elements of the software NVIDIA should I install, or even avoid? Or do I just install everything what it offers? This system will ONLY be used for retouching... no games, etc.
Driver software of 344.11 displays the following:
Graphics driver (Duh)
3D Vision controller driver
Pilot 3D Vision
HD Audio Driver
Miracast virtual Audio
NVIDIA GeForce experience
PhysX System Software
Thank you very much for your help!
Gregg Hill
I installed everything except the "NVIDIA GeForce Experience" element.
I put the computer today, and my client will get loaded and tested PS later today. She should be happy!
Thank you very much for your answers.
Gregg
Maybe you are looking for
-
Add iTunes playlist to the slideshow of pictures
-
How to remove a contact online?
an unwanted touch is somehow in my online contacts list in the left sidebar of my e-mail page. How can I remove this contact from the list? Frances
-
License OR VISION Run-Time Engine
Hello I send you this question because despite the number of doc that I could find in relation to my question, I have not had a clear answer to my pb: I have an application that has been developed with LV 8.2.1 using NI IMAQ 3.7 from functions. (Very
-
Background image and draw XYGRAPH received same zoom and pan values
Hello!.
-
my cable internet connection is only 10Mbps and won't go to 100 Mbps windows Vista premium edition
My inter connection wire line or hard earth runs only at 10 Mbit/s and should be 100 Mbit/s running vista Home premium and and using realtek rtl8168C (P) / 8111C (P) FAMILY GIGABIT ETHERNET NIC (NDIS 6.0). How can I solve this problem.