Simulating targets RT?

Similar Questions

• Error in build Simulator target

  I'm new to BB 10 Web work 2, while trying to debug via Simulator, I get the following log?

  [INFO] The application of filling source
  [INFO] The analysis of config.xml
  [INFO] Generation of output files
  [WARNING] Cannot find the debugging token. If you have an existing token of debugging, copy it to C:\Users\Student\.cordova\blackberry10debugtoken.bar. To generate a new token of debugging, choose 'run '.
  [INFO] WARNING: Cannot find default icon or application
  [INFO] Package created: C:\Users\Student\WebWorks Projects\MyTime\platforms\blackberry10\build\simulator\bb10app.bar
  [WARNING] Cannot find the debugging token. If you have an existing token of debugging, copy it to C:\Users\Student\.cordova\blackberry10debugtoken.bar. To generate a new token of debugging, choose 'run '.
  [INFO] WARNING: Cannot find default icon or application
  [INFO] Package created: C:\Users\Student\WebWorks Projects\MyTime\platforms\blackberry10\build\device\bb10app.bar
  [INFO] BAR complete packaging

  Is there a Setup error in SDK?

  MShom, I was able to get a debugging managed without warning by bb10app.bar copy of C:\Users\Student\WebWorks Projects\MyTime\platforms\blackberry10\build\simulator in C:\Users\Student\.cordova file and rename it to blackberry10debugtoken.bar.

  Can I know why the bar file generated in the form bb10app.bar and BB10 WW2 application blackberry10debugtoken.bar?

  [INFO]    Populating application source
  [INFO]    Parsing config.xml
  [INFO]    Generating output files
  [INFO]    Warning: Cannot find application or default icon
  [INFO]    Package created: C:\Users\Student\WebWorks Projects\MyTime\platforms\blackberry10\build\simulator\bb10app.bar
  [INFO]    Warning: Cannot find application or default icon
  [INFO]    Package created: C:\Users\Student\WebWorks Projects\MyTime\platforms\blackberry10\build\device\bb10app.bar
  [INFO]    BAR packaging complete
  

• Air 20.0.0.233 ios signature not valid error

  Hello

  I get an error of itunnesconnect with an email like this:

  Invalid signature - make sure you have signed your application with a certificate of distribution, not an ad hoc certificate or certificate of development. Verify that code in Xcode signing settings are correct at the target level (which cancels all values to the project level). Additionally, make sure that the bundle you load was built using an output in Xcode target, not a simulator target. If you are certain that your code signing settings are correct, click on "Clean" in Xcode, delete the 'build' directory in the Finder and rebuild your output target.

  Once these issues have been fixed, go on the release Details page, then click on "Ready to Upload binary." Continue through the submission process until the status of the app is "Waiting for Upload. You can then deliver the binary has been fixed.

  But I'm sure that on my certificate and provisioning of file are correct.

  As is - this can be linked to known problems on the last document of air (20.0.0.233) release notes?

  My configurations

  Adobe Air 20.0.0.233

  8.1 Windows 64-bit

  ITunes 12.3.1.23

  Thank you.

  Hi all

  Invalid version number has been fixed on Win and Mac AIR SDK.

  Please find the fix here:

  http://labs.Adobe.com/downloads/air.html

  Thank you for your patience. Please let us know if you have any questions.

  -Roshan

  Adobe Air

• Error ITMS-90035 after having a new collection

  I was able to send the app on the app store, but after making a few changes (through the DPS), then redownloading the app and he resigned I get this error. Nothing has changed regarding certificates and configuration profiles.

  Everyone running into this issue, I tried everything to fix it. Even of the new certificates etc...

  It is of the complete error:

  ERROR-ITMS-90035: "Invalid Signature. A sealed resource is missing or invalid. Make sure you have signed your application with a certificate of distribution, not an ad hoc certificate or certificate of development. Verify that code in Xcode signing settings are correct at the target level (which cancels all values to the project level). Additionally, make sure that the bundle you load was built using an output in Xcode target, not a simulator target. If you are certain that your code signing settings are correct, click on "Clean" in Xcode, delete the 'build' directory in the Finder and rebuild your output target. For more information, please visit https://developer.apple.com/library/ios/documentation/Security/Conceptual/CodeSigningGuide /Introduction/Introduction.html"" "" "

  When did you rebuild the app? Yesterday? This morning? Try to build the application again in App Builder and re-sign it.

  Neil

• Problem download my Flash/air app to iTunes connect: invalid signature

  I have developed an application using Flash CC set to deploy to 3.8 AIR for IOS. Now, I'm stuck on the last obstacle: submit the application for iTunes connect.

  I downloaded successfully the application - outside a few warnings on the icons size 120, 76 and 152. And then immediately after I get an email which reads as follows:-

  We found one or more questions...

  Invalid signature - Make sure you have signed your application with a certificate of distribution, not an ad hoc certificate or certificate of development. Verify that code in Xcode signing settings are correct at the target level (which cancels all values to the project level). Additionally, make sure that the bundle you load was built using an output in Xcode target, not a simulator target. If you are certain that your code signing settings are correct, click on "Clean" in Xcode, delete the 'build' directory in the Finder and rebuild your output target.

  I checked, re-checked and checked again the certificate.p12 and the provisioning profile. They all look good to me, not "ad hoc" distribution-updated The deployment type is set to "Ap Apple store".

  I do not see what hurts me and makes me crazy (and of course, I'm on a deadline).

  Help, please.

  Thanks for the tips. I posted the solution deliver me here: http://forums.adobe.com/thread/1382739

• Error "Invalid Signature" on iTunes store

  Hi all:

  I used Flash Builder 4.6 to build a mobile application, the application is now in Google Playstore, but I had problems to be submitted to the Apple App Store.

  The app has been transferred successfully to the Apple App Store, no problems.  But within 30 seconds, I received this email:

  Dear developer,

  We found one or more problems with the delivery of your recent to 'SurevyPulse '. To process your order, the following questions must be addressed:

  Invalid signature - Make sure you have signed your application with a certificate of distribution, not an ad hoc certificate or certificate of development. Verify that code in Xcode signing settings are correct at the target level (which cancels all values to the project level). Additionally, make sure that the bundle you load was built using an output in Xcode target, not a simulator target. If you are certain that your code signing settings are correct, click on "Clean" in Xcode, delete the 'build' directory in the Finder and rebuild your output target.

  Once these issues have been fixed, go on the release Details page, then click on "Ready to Upload binary." Continue through the submission process until the status of the app is "Waiting for Upload. You can then deliver the binary has been fixed.

  Kind regards

  The App Store team

  I'm sure I used the certificate distribution and the distribution provisioning profile absoultely. And the certificate is not valid for July 2013.   What could be the possible reasons for the error?  I spent two days in pulling my hair, made a lot of new buildings but no luck.  I didn't even look in inside .ipa files and they all look fine to me.

  Can someone throw some lights on it?  If we cannot solve this problem, it will impact really our future decisions on Flex.

  Thank you.

  Yuying

  I solved the problem.  It turns out the .p12 file was bad.  Make sure that you ask the person who created the certificate to genearte the file to .p12 for you.  In my case, our admin account iOS created a bad .p12 file.

• Space required on target RT for LabVIEW Control design and Simulation

  Hello

  I want to run a DLL file on an RT target using LabVIEW Control design and Simulation, but I'm not sure of the required amount of RAM on the RT-target. My RT-target options are respectively cRIO 9002 and cRIO-9004 with 32 and 64 MB of RAM. Is this a sufficient amount of RAM to run the simulation? ¨¨

  Thanks in advance

  This will depend on the size of your dll, the size of the rest of the code, you can create other necessary drivers/modules, memory use when your application runs, etc.

  9002 and 9004 have not a lot of RAM on them and the minimum software installation to run a control application Design & Simulation (CD & Sim) will take around 22Mo of it (the majority of RAM available to the 9002). It would be possible to run your application on these two controllers if you keep it small but it will depend on what you want to do.

• Veristand does co with target rt (pxi) and simulink simulation

  Veristand supports simulation of co with target RT (pxi) and simulink MDL... If he is well wanted to share me partners implementation document

  (Note: we have already implemented .dll depending on model)

  Only the PC engine can do directly co-simulation with Simulink. You cannot use a MDL file directly on a target of RT. This type of co-simulation is certainly not in real time and is not suitable to run on an RT target that performs other urgent tasks. You can have multiple targets in your system definition, then you might have an RT target and a target PC. But you need means of communication between the two target types. Which may include a model or a custom device.

• Number of cycles Express VI outputs '0' on target with simulated FPGA of e/s

  When I set my target to "Run VI on it development with simulated i/o", the number of cycles to screw all the outputs ' 0 whenever they perform. How can I do a count up (in the case of "ticks") or a timestamp that is appropriate (in the case of "ms") the output?

  In fact it does not work as expected. I apologize. When in mode [ms] he ran if slowly as my test that bolt looked like they were defective and I did not notice the value incrmenting when I probed it. I changed the test to use the [ms] instance when running on the FPGA and the [ticks] instance during execution with simulated IO. This looks like it gives 1 tick every "" millisecond"simulated" when simulating and now operate my well tests.

  Thank you very much for the help. Sorry again for the false report.

• External template function (control and Simulation Module) on Linux using target

  Hello

  I am trying to run the 'EMI_Integrator.vi' for example on one OR cRIO-9024 (nor a myRIO).

  I moved the file 'EMI_Integrator.so' to the ' / or-rt/system ' on the cRIO and the .so file added to the target in the LabVIEW project. I can not navigate to the .so file directly so I specified the .so path manually, but the VI is not able to run and an error of-2366 'reissue model '.

  "You can find the original version of VI in the Finder for example OR", but I've included my modified version that has a LabVIEW project and targets already loading.

  Thank you

  Mitch

  Hello Mitch,

  If you want to use the external model on a 9024 node, you must copy the appropriate VxWorks library (.out) file to the/or-rt/system folder of the target. The .out file is located in LabVIEW\Examples\Control and Simulation\Simulation\External model Interface\EMI_Integrator\RT-Lib\vxworks.

  In LabVIEW, have the external model node refer to the file of the library appropriate for your operating system. In my case, I use a .dll for Windows file located in the folder EMI_Integrator, above.

  When I run the VI on the cRIO target, referring to the library on my host computer, it will automatically search the folder to/or-rt/system for a file with the same name with .out.

  Kind regards

• SIT: Settings of Inline of Matlab: Simulation Environment & remote target

  Hi all

  When I inline in a Simulink model parameters, and when I run it in the SIT Simulation environment, it's as if they would not have been treated in inline mode. Each block of the model appears.

  And when I try to launch it on a remote target (PXI-RT controller), the blocks that interest me are present, the constants that I put in the workspace are disappearing.

  Any suggestion, please? : PEI

  Thank you

  Hugues

  
  

• In a wreath of two screens Thunderbolt, I could replace the first display with a (for example) 2012 iMac and use target Display Mode to power the two?

  My Thunderbolt screens have the possibility to be connected in Garland and get their signal on a single cable Thunderbolt, an iMac in target Display Mode should not also have this capability? Is an iMac in target Display Mode capable of simulating a Thunderbolt Display not only to get a video for himself but also for a Thunderbolt Display is connected?

  I've heard tell that some people used their iMac screen target with the target Display Mode while the iMac has been connected to another monitor (not a Thunderbolt Display).

  The result was that internal display of the iMac switched on the target Display Mode, but doesn't have the monitor connected.

  I haven't found someone who has tried this and published his experience with a Thunderbolt Display connected to the iMac.

  Unfortunately, a little more research would have responded and answered my question.

  Yes, I can replace one of the Thunderbolt screens in the chain with an iMac. Replaced screen should be one that is not directly connected to the mac of the source.

• LabVIEW FPGA: Not possible to create an executable file that uses the FPGA in Simulation Mode? I get a weird error code

  When I try to create an executable from a host VI that has an "Open FPGA VI" reference who has run, the value "Dev computer w / Sim i/o" value, the application is built without error but when I try to run it, it opens with an arrow broken to run and has the following error:

  "VI has an error of type 2302200.  The full development of LabVIEW version is necessary to correct mistakes. "In fact, he repeats this message two times in the same window for some reason any.

  Moreover, I * have the LabVIEW full development version and I use 2010 SP1

  While the error message is not as clear as it could be, you're right: you cannot run an executable file that tries to run an FPGA VI in the simulation.  It would be nice if there was an error in compiling.  I always forget to switch to run on the target FPGA before building my application and discover the error until I have it copied on the system in the laboratory.

• loop control and simulation: sync settings

  Hello

  Is it possible to access times higher at 1 kHz source in synchronization settings, control and Simulation in a loop, without use of real-time targets? For example, using time cpu.

  I use myDAQ OR data acquisition, and I need a 100 kHz synchronization source about.

  Thank you very much.

  Kind regards

  Keshav

  N ° when running on a PC of the class, you are working with a set of standard material (with its clock 1 kHz) and a non-deterministic BONE, and there is nothing you can do about it. That is why acquisition cards NOR are all smart devices with their own processors, memory, and clocks.

  Mike...

• Cannot run Simulink DLLs at the same time that the execution of the target time real VI

  Hello

  What I try to do is run a dll created in the Simulink model to control some servo through a CompactRio 9014.

  For the moment, I managed to create three screws

  (1) in the FPGA target that performs the PWM channel desired

  (2) which takes the value of a variable that contains the desired position and network that feeds to the 1st VI

  (3) a VI that is running on the host computer that changes the value of the network variable to change the position

  I can get these three work screw and the servo controlled, but when I try to update the value of the network variable using simulation, by deploying to the target of RT simulation and running, he said:

  ' Access denied: this objective is already used by another host or project. »

  I guess that's because the project is already connected the cRio, so I unplug and am able to deploy the model files.

  However, when I try to run one of the screws in the Targer RT as well as simulation I get the error:

  "This VI is downloaded to the target, but is not present in the project you are trying to deploy.  All the screws on the target will be closed unless you choose to add the missing project VI. »

  With a large number of missing screws...

  I'd do this wrong, i.e. is there a simpler way to control inputs FPGA using the simulation, or is there something I have missed?

  Thank you

  Geoff

  Hi Geoff,

  I think I understand what you're trying to do and what you've done so far.

  If I'm not mistaken you have passed through the SIT connection manager, set your target RT (select DLL, mappings and hardware i/o) and this is his 'magic '.   If this is the case of look for the project pilot LabVIEW which was created by the SIT connection manager.  This should live in the same folder where is your DLL.  Open the pilot project, search for VI driver and open it.  Then go into the Sub - VI # 5 has with the name of the loop rate Base.  It's the Subvi who reads/writes on the material and the reads/writes the data to the DLL/OUT model.  If you want to read the output of your model and then manipulate the data that is where you need to add your code.

  Inside of this Base rate loop VI there is a Subvi with number 4 and called SIT take model Timestep.  This VI is the one who makes the call to the DLL model.  The output of this VI is your data from the model.  This data goes into slot - VI # 5, which is responsible for the drafting of these data to the material.  Since you want to manipulate that data from the model, you need to recover data from the wire coming from the Subvi 4 (SIT take model Timestep) before it gets to the Subvi # 5.

  In this VI of Base rate loop, you will see that there are a few empty block structures.  These images are for you to put any code you want.  The reason is that any changes you make to the driver VI and subVIs that aren't inside of these frame structure will be lost if you decide to go in the connection manager to sit DOWN again and make some changes.  The VI pilot gets new script whenever you do something in the SIT connection manager.  Whatever it is inside these frames will not be erased.

  So, if you have a code you want to run in parallel to the simulation you just have to drop it inside this driver VI.  Very probably within this Subvi 5 (Base rate loop). To add your code just drop the VI in one of these settings and make any changes that him so that he can read the data in the model.    Furthermore, the model (Subvi 5) data in a table.  For the index of each element in the array and its meaning look for a file in the same folder where the DLL is named readme.txt ports.  This file has a description of the inports and small ports and their indexes.

  This VI driver is called when run you the host VI so you won't have to run sepearately.

  Kind regards

  Ricardo

  National Instruments

  Systems engineering