Simulator of does not work :(

Similar Questions

• command Simulator "StringInjection" does not work with SureType keyboard

  Hello

  I use the Simulator command 'StringInjection' to simulate keyboard input. However, it does not work with SureType keyboard.  Still, it appears a list of suggested words, which make the string injection stops. Is anyway to avoid this?

  It is the expected behavior.  StringInjection simulates typing on the keyboard, what might trigger a prompt SureType.

• Simulator of does not work in my laptop

  I have a problem: Simulator works does not in my laptop
  My laptop: HP elitebook 8460 p, core i5 2540, hard drive 500G, 4 GB ram, graphics intel hd 3000
  Status:
  Hyper-V... OK, free ram 2.5 G
  -Graphic support open GL 3

  Video:
  https://www.YouTube.com/watch?v=1DdrhGCkeVI

  Does show that as soon as it starts or what is done to access this screen.  What host operating system are you running?  You can try to re - install the Simulator?

• 10.3 simulator Rotation does not work?

  I'm testing an app on the Simulator. I use the controller to change orientation, but nothing happens. It runs on a device.

  The Simulator does not support rotation?

  Works for me trying to touch the lower right corner.

• Simulator FMS does not work saying needed D3DRM.dll

  Original title: needed D3DRM.dll

  I installed a program, simulater FMS, which must have D3DRM.dll installed in order to operate. I am using Windows 7 and have service pack 1 installed also I Direct X 11 also I thought they contained that file dll but I cant find it.  How to get it and put it in the program?  Thanks in advance... highvolts

  Thank you Manu, in response to questions 3:

  1. it is not a Microsoft Simulator, is a FMS
  2. He never worked on my computer because he needed the D3DRM.dll file in order to operate.
  3. the recent change of software added this simulator on my computer.
  Thank you for your answer, but since I downloaded the file from the FMS web site and installed in the simulation software, which now works fine, I won't need extra help.  Thank you again for your quick response... Michael

• GPS location works Simulator, but does not work in the device

  Hi all,

  I have problem with GPS location.

  I have the button through which I can get the latitude and longitude in Simulator via LocationProvider class.

  His work very well in the Simulator, but giving is not the result in the unit.

  I use Storm 9530 devices and curve 8830.

  Thank you

  Valter

  Thanks for your support,

  Finally, I found my location.

  The steps are:

  As a first step BBDeveloper mentioned

  Options of-> advanced-> GPS Options

  Now,.

  Start the application maps

  Select Menu-> start the GPS Navigation

  or

  Find the location-> where I am

  It will activate the GPS.

  Thank you and best regards,

  Valter

• Solved: Webservice Playbook call does not work

  I developed an application Webworks, loosely based on the thread "how I would call a Webservice" and it works very well in the development environment, great in a Blackberry Torch, which is great in the playbook Simulator, but does not work when it is deployed Live from a playbook.  The compilation seems fine.  Find the looks to deploy, the bar is signed without error.  Life should be good!

  The web service is sitting on a server in-house, available on our company intranet, but not the internet.  We use BES.  When I fill the Playbook, I can use the browser open to see the webservice.  The torch, which I'm thrilled to the can run the application very well.  When I run the application on the playbook, however, I get nothing.

  Y at - it an option of setting or configuration I need to use to make this work?  I think that if it works in the Simulator, and if I can get to the site via the browser open, I'd be OK.

  Any help would be greatly appreciated!

  UPDATE: Stipid programmer thing... I had to adjust the white list.  For some reason, the Simulator did not care, but the real instrument don't!

  Yes, adding the item fixed the problem.

  It is a web service that is hosted on an internal server.  The server IP address is 10.x.x.x, so it is not reachable from the internet.  We do not currently have VPN.  I did some checking, and it seems that it is able to reach the server via WiFi.  I had assumed that he was using the bridge.

  It is unfortunate that the WiFi is the only option, because as soon as I leave the building, I have more access to my internal data stores.  It is good to hear that it's something that you're talking, but dissappointing is not available yet.

  Thank you.

• I just dug my copy of train simulator, and it does not work on Windows 7 64-bit. Ideas please

  I just dug my copy of train simulator, and it does not work on Windows 7 64-bit. Ideas please

  Thank you very much for all your suggestions. "Iwent with."

  This can help with some (but not all the) programs/drivers:

  (1) uninstall the program, if it is already installed. Then when install you / reinstall instead of double click on the Setup file, right click and select 'resolve compatibility issues.

  (2) then click on 'Try recommended settings' and in the next window, click on "Start the Program" to install it.

  (3) after he set up see if it works properly. Note: some programs may not be able to run in Windows 7.

  and it worked.

  did anyone tried the version updated? I read some rather disappointing reveiws.

  Once again my kind thanks for all your suggestions

• Microsoft sidewinder gamepad 2 does not work on the Combat Flight Simulator WW11 and Europe series

  Original title: I have the Combat Flight Simulator WW11 and Europe series. My microsoft sidewinder gamepad 2 does not work on my XP and my Windows 7 computer. The joystick works on CFS2 Pacific. Help, please.

  I have a HP Pavilion p6717c with a radion HD 6900 graphics card. With windows 7 home

  Hello

  1. don't you make changes to the computer until the problem occurred?

  2. you get any error message?

  I suggest you to see link below and check if it helps.

  You experience problems when you use a Sidewinder Force Feedback Pro joystick with Flight Simulator on a Windows 2000, Windows XP, or Windows Vista-based computer: http://support.microsoft.com/kb/294672

  How to fix game controllers in Microsoft games: http://support.microsoft.com/kb/831361

  Items of Combat Flight Simulator: http://support.microsoft.com/combatflightsimfaq

  Also I suggest you to send your request in the below link.

  http://www.Microsoft.com/games/en-us/community/pages/forums.aspx

  Hope this information is useful.

• Microsoft Flight Simulator does not work

  My husband is having a problem with his flight simulator.  After that, it installs the software, it is able to play.  However, after this first piece, once he leaves the program and try to open it again, it will not load.  The programs displayed on the hard disk but does not work.  It uninstalled and re installed the program, with the same result.  After the initial piece after installation, it is not able to play again.

  Hello

  Here is a link that should prove beneficial to get a resolution to your inquiry.  I hope that this information is beneficial.

  http://social.answers.Microsoft.com/forums/en-us/vistagaming/thread/24974b97-BCEE-46EA-8f52-f7ad0881125a

  Thank you

  Aaron
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• My Logitech extreme 3D pro joystick does not work with the dogfight when played on vista Simulator.

  Why can I not get my joystick works when you play the air combat Simulator?  I'm under the it on my laptop with vista.  The game installs fine, but I don't get a response when I use the joystick which is a Logitech extreme 3D pro.  I go into the settings to calibrate it and it shows that it is there and it tests fine but it still fails.  I thought it was just the joystick, but it works with the microsoft x Flight Simulator.  Then I tried to install the joystick Saitek initially, I used to play the game with and got the same answer, it would not work and settings would recognize the control stick and he would test well but still does not work.

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  It seems that the joystick drivers are not updated for windows Vista.

  Try to access the link below and install the gamepad for vista drivers and install the same as an administrator.

  http://www.Logitech.com/index.cfm/441/291&Hub=1&CL=GB, en? DiSo = 13

  If this does not work, try to contact Logitech and check if they have updates on this for Vista.

  Follow the link below for more information.

  Combat Flight Simulator 3: how to troubleshoot joystick

  http://support.Microsoft.com/kb/811463

  Hope this information is useful.

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our Microsoft answers feedback Forumand let us know what you think.

• Microsoft Flight Simulator 2004 installation with the 4th vista disc does not work. What should I do?

  Microsoft Flight Simulator 2004 installation with the 4th vista disc does not work.  What should I do?

  Hello

  You get no matter what error code or error message?

  There seems to be a problem with the file missing in the rear disc system. I suggest you to refer to the following Microsoft article and check if it helps.

  Flight Simulator 2004: known video issues: http://support.microsoft.com/kb/823628

  If the steps in the Microsoft article mentioned above do not help, then it would be best to ask your question in the Microsoft Game support forum.

  Microsoft Flight Simulator Games Forum: http://www.fsinsider.com/

  Or contact support for Microsoft Flight Simulator game: http://www.microsoft.com/Products/Games/FSInsider/tips/Pages/default.aspx

  Hope the information is useful.

• Touch area does not work in the Simulator controller

  Hello!

  I use the bb Device Simulator.

  Official documentation says that with touch area to the Simulator controller I can navigate from control to control my fi application, I put political correct ficuse for her. But the touch area does not work for me. No event is occure when I do drag and hold the cursor of the mouse on the tactile area, or classic Simulator, not different mouse buttons.

  Tested under Windows 8.1 and Debian Linux with Xorg + awesome wm (and Xorg + mate of).

  How to solve this problem?

  Thank you!

  I tried this using the BlackBerry 10.3.2 Simulator and it worked.  At startup, you choose the default option no 1440 x 1440 Passport?  The Passport is the only BlackBerry 10 smartphone that supports active touch keyboard.  If you use the default startup in Simulator (Z10) the touchpad option does not work because it is not supported by this model.  To change the type, press ENTER when the Simulator starts first.

• jQuery Mobile app does not work on OS5 telephone, but works in Simulator

  Hello

  I'm trying to run a simple jQuery Mobile (beta2) app on my phone and its does not work.

  Had been a working app and it worked on the Simulator, but didn't have a screen on the phone Curve8900.

  Then I created a simple jQuery Mobile app that displays a header, content (with listview) and the foot.

  When I insert in the Simulator, it looks fine, but when I charge the phone it loads and displays a white screen with a small gray square at the top left of the screen... (perhaps 30 x 30 pixels or less)

  (the rest of the screen is green, because I put the bottom in the config.xml file to green)

  I've specified:

  and also I tried using:

          addEventListener('load', doLoad, false);
  
          function doLoad() {
              document.body.style.height = screen.height + 'px';
              alert('initPage 3');
          }
  

  but makes no difference.

  (Before I added jQuery to app it worked fine)-very tedious debug because I need to sign the code every time I have test and restart the phone after the installation

  Any help appreciated.

  Maybe someone has a skeleton jQueryMobile app that works on OS5?

  Hi Heiko,

  According to this example JQuery 1.5.2 seems to work on 5.0. Do you need a feature of 1.6.2 otherwise maybe try this library instead.

• BlackBerry Webworks App does not work on the Simulator after conditioning

  Hi everyone, I ' ve developed a webworks app and everything works fine on the emulator ripple, but when I load it on the Blackberry (9860 and 9930) Simulator... it loads successfully (I can see the icon, etc.), but when I open it, appears only a WHITE SCREEN...!

  I thought it was the Blackberry Simulator, so I changed it (does not work)

  I thought it was my application, so I leave my fair "index.html" with a BLACK background (does not work)

  the Validation of my config.xml file is fine, and I have not any idea on how to solve this problem!

  Help please, thank you

  

  

  http://mundourbanohn.com/Simulator1.jpg

  Hello, thanks for people, but I already solved this problem, I had a div with POSITION: FIXED; and apparently WebWorks does not support this CSS property, so I removed it and everything works fine. Thanks in any case. Concerning