The device does not seem to be pluged?

Similar Questions

• my iphone 6s is stolen I had activated find my iphone, but now the device does not appear on my icloud find my iphone please suggest what to do.

  my iphone 6s is stolen I had activated find my iphone, but now the device does not appear on my icloud find my iphone please suggest what to do.

  If your iPhone, iPad or iPod touch is lost or stolen - Apple supports

• Driver VGA Dual-Mode Camera installs but the device does not appear in the list of devices to Windows Photo Gallery

  Driver VGA Dual-Mode Camera installs but the device does not appear in the list of devices to Windows Photo Gallery

  Hello

  I will need to know the brand and model of the device in order to help you solve it.

  You see the device listed in the Control Panel, hardware and sound, scanners and cameras?
  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows displays the device works correctly. However, the device does not appear in windows Explorer. also, I can not format disks.

  Windows displays the device works correctly.  However, the device does not appear in windows Explorer. also, I can not format disks.

  What should I do next

  Hello

  1. Are you referring to the NEC USB Floppy Driver?
  2. You try to format floppy disks?
  3. Was - this earlier work, if so, did the chnages on the computer before this problem?

  If it worked, I suggest the following methods and check the status of the issue.

  Method 1:

  Open the hardware and devices troubleshooter.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• I use Adobe cloud to disrupt the application, but the user that I assign an application, the software does not seem his profile

  I use Adobe cloud to disrupt the application, but the user that I assign an application, the software does not seem his profile

  Hi stephanet60407823,

  If the software does not appear on her profile, it means that it did not accept the invitation that you sent to him.

  Ask him to please follow the steps here: https://helpx.adobe.com/creative-cloud/kb/accept-invitation-team-enterprise.html

  Let us know if this helps!

  Kind regards

  Aurélie

• Need to update my Acrobat 9.0.0 Pro to 9.5.5 version. Where can I find the necessary files - because the update does not seem to react (not supported any more, I guess that)

  Need to update my Acrobat 9.0.0 Pro to 9.5.5 version. Where can I find the necessary files - because the update does not seem to react (not taken care no more, I assume that). I wouldn't be forced to buy a newer software in this way...

  You can get all updates from here: ftp://ftp.adobe.com/pub/adobe/acrobat/

  Remember that you must install in order, one after the other.

• The device does not appear in the menu generator of folio

  Hello

  I use a new Samsung Galaxy Note 10.1 (2014 edition). The device does not appear in the menu designer folio when I try to do a test. You have an idea?

  My computer: MAC OS 10.8.5 with InDesign CS6 8.0.2

  Samsung Galaxy Note Note 10.1 2014 edition, 4.3 Android

  Thank you

  (You can answer in french or English)

  Thank you Bob for you answers.

  My problem is solved.

  The advanced options menu is hidden on the new tablets Galaxy Note 10.1.

  To bring up this menu go to the menu "about the device" and press the number of the model 7 times.

  The advanced options menu appears. In this menu, you need to turn on USB debugging.

  Fact.

• dose of the device does not react to the C++ code

  Hello.

  I have meassuring keithley 237 system, connected to the port COM4.

  And I commands manual keithley insturment.

  When I use assistant LabView Instrument IO and put in "query and analyze" the steps of these commands, the device reacts as it should.

  But when I try to write and run my own C++ code, device does not react.

  just no reaction at all!

  Maybe someone can help me and tell me what's missing.

  Here's my C++ code:

  #include #include "visa.h"
  
  using namespace std;int main (int argc, char *argv[]){       ViStatus status;    ViSession defaultRM, instr;    /* Open Default RM */    status = viOpenDefaultRM(&defaultRM);
  
      if (status != VI_SUCCESS) {        /* Error Initializing VISA...exiting */             return -1;        }
  
      /* Access other resources */    status = viOpen(defaultRM, "ASRL4::INSTR", VI_NULL, VI_NULL, &instr);
  
      // here I send commands to device    viPrintf(defaultRM, "F1,0X");           //  "F1,0X" and all another symbols in "" are just commands from keithley manual.          viPrintf(defaultRM, "B1E-6,0,X");    viPrintf(defaultRM, "L11,0X");    viPrintf(defaultRM, "P3X");    viPrintf(defaultRM, "O0X");    viPrintf(defaultRM, "N1X");    viPrintf(defaultRM, "H0X");
  
      viClose(instr);    viClose(defaultRM);
  
  return 0;}
  

  Hello

  There is an obvious problem in your code: viPrintf () accepts as a first parameter a session handle, which is "instr" variable returned by viOpen () in your case. Using the default resource manager leads to incorrect results (BTW, you must add to your code an error checking: I expect viPrintf () to return VI_ERROR_INV_OBJECT or similar error).

  As long as an additional indicator, I noticed that you use no termination for your messages: you should check in the documentation for the device if you need to add a stop character (the instruments most want a '\r' or '\r\n' sequence at the end of the messages to accept).

• I wish I had my day starts at 08:30, 12: 00 no, but that change in the options does not seem to affect the appearance of my calendar, how can I change this?

  I just started to use Windows Calendar.  I wish I had my day starts at 08:30, 12: 00 no, but that change in 'options' does not seem to affect the appearance of my calendar, how can I change this?

  Hello
   
   
  Exactly why you want to change the start time of day?
   
  If the part highlighted changes in the calendar view, which means that the option is selected.
   
  I suggest you to see the link and check if this is useful:
   
  Customize windows Calendar
  http://Windows.Microsoft.com/en-us/Windows-Vista/customize-Windows-Calendar
   
  I hope this helps.

• I want to install a yeti pro Usb device but the system does not seem to find it

  the yeti pro is a plug-and-play device that self settle, but for one reason or another, it does not do this. In the devices window that there a yellow sign attached to it, apparently not correctly installed,
  I downloaded the driver to install it manually but the pilot application cannot find the device on the PC, even if it is connected (all used ports) and the driver is not configured to install without the connected device
  I willl be happy if any1 can help out me
  Thank you

  Hello

  Glad to know that the problem has been resolved.

  Travel to your other question.

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  Uninstall process will not go by if there is no file in the program folder files.

  I you suggest to install tuneup utilities again and then you can uninstall programs and features.

  Please let us know the status of the issue.

• Why the device does not recognize QR codes?

  Why the Apple device on the products Apple (iPhone, iPad...) does not recognize QR codes?

  You need an application, like the QR reader

  https://iTunes.Apple.com/app/QR-reader-for-iPhone/id368494609

• Multisim 12 - by clicking on the button "stop the simulation", does not seem to turn off the circuit

  Greetings.

  I recently installed 12 Multisim and have not changed the basic operational parameters, I know...

  Shortly after installation, the application is an update.

  Your help is apprecaited to understand what is happening...

  Steps to recreate:

  1. start multisim.

  2. open a very basic circuit that includes a battery 10V with the ground, a lamp, a voltmeter between the lamp and an ammeter in series.

  3. use 'switch' at the top right of the appliation multisim window to run the simulation.

  4 lamp shows a 'enlightenment' and voltmeter indicates 10V and ammeter indicates .1a circuit.

  5. use the switch to stop the simulation.

  6. no change in the circuit or lighting of the lamp measures.

  7. same results if the simulation starts the arrow and the red square are used to start and stop.

  If I close it and reopen it circuit, the circuit begins in the OFF state, but will not OFF If when you select stop simulation.

  This is the case with several circuits, those provided by the College and the other that I created based on the same design.

  Multisim restarting has no effect to correct this observation.

  It doesn't seem normal that when the simulation running, values or apparent lamp lighting does not change.  The simulation doesn't have to go back to the start state (OFF) when I stop the simulation?

  I captured the homerun status after stopping the simulation.

  Thanks in advance for your help.

  Zan

  Hi zanzarista,

  Multisim retains the values for everything in the circuit when the simulation is stopped. Which means that you are able to view the values on your instruments (such as multimeters) even after the termination of the simulation. When you start a simulation once again, starts all over again and that's why you see a 0 momentarily.

  It is the way in which the software is intended to work.

  I hope this works.

• Windows vista Manager or the device does not recognize the cd/dvd drive

  I have windows vista and it is not recognize my cd/dvd drive. When I click on my local drive (c :)) and recovery hp (d) shows up, I checked my device manager and nothing shows here either for my cd/dvd drive, so I checked the cable but it looks fine.) checked the files of the upper and lower register, but that fact so I just bought a dvd burner external made by polaroid that is USB2.0 and supposed to be plug-and-play, but when I connect it nothing happens nothing. the power turns on two cd players and the disc starts to spin but it stops after 15 seconds and I get nothing. I am confused and don't know what to try. Please help thanks. so I tried to use the running microsoft dvd set and the message I said 'dvd cd drive not detected '.

  I tried these steps with no luck

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Hello mike salinas.

  1. you have any third-party burning software installed on your computer?

  2. have you checked if the external CD drive works on another computer?

  I suggest that you check if your internal CD-ROM drive is detected in the BIOS.

  Usually, you must press a key (for example, F2, F12, DEL, ESC) or a key combination whenever you turn on your computer, but before I get to the BIOS to start Windows. Check to see if there is the CD/DVD drive in the BIOS.

  You can see the article for more information about the BIOS:

  http://Windows.Microsoft.com/en-us/Windows-Vista/BIOS-frequently-asked-questions

  Regarding the external CD/DVD drive, I suggest you see if it works on another computer.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Safely remove the device does not respond

  I've recently updated my laptop operating system to Windows 7. When I upgraded first, it worked normally. But recently I realized that when I click the icon remove the device safely to remove my thumbdrive, it does not for me already. I tried to right click, but nothing happens.

  Please help me! Thanks and appreciate your help!

  Have you checked in the Device Manager for the yellow or red flags on the USB controllers? If found, remove items and restart.

• How will I know that my Windows product key is if one on the sticker that is located on the computer does not seem to work?

  You want more details. For two hours I answered all the questions that ask you that. And still no support. You up to the date of this laptop, every day at 03:00, so don't tell me the product key, which is on the back of this box is incorrect. Or that it is not the country I say. Just send me what is on the back of this box, which I paid too much for in the first place.

  We are not Microsoft. We are volunteers who give of our spare time to help people. Complain about Microsoft is a waste of time. We are in the same boat as you when it comes to most of the problems and not more control or access that you have to do.

  A product key is not in the box where everyone can see.  It is a sequence of alphanumeric 25 digit of 5 sets of 5 digits separated by dashes for the operating system.  If this is the original installation, the key will be on a label on the underside of the laptop.  It has been upgraded or purchased as a product of the retail (suggested by saying you that you have a box), then the product key for the product to the retail sales would have been on a piece of paper inside the box.  The product key on the label of the laptop would have been crushed (which would have been in the computer would have been product key from the manufacturer that could not be used to enable or provide proof) by installing the retail or upgrade.  Microsoft has no idea what is your product key regardless of the case - even if you bought them (unless it was by a download and then you should have an email from their share with the product key to this topic).

  If this is not a problem of activation or re-installing and that you have installed and activated the product yourself, try of Belarc Advisor http://www.belarc.com/free_download.html and see if the product key, it reveals work best of all what you use now.

  For more information, if it does not help, post to http://answers.microsoft.com/en-us/windows/forum/windows_install?page=1&tab=all&tm=1300700638376.

  Good luck!