Simultaneous voice and data on Verizon?
OK, you can now pre-order the phone, and yet I saw no confirmation one way or another as to if the Moto X play supports simultaneous voice and data on Verizon. I tweeted Verizon today and they claim that they do not have the specs of the phone.
I can't believe anyone, namely, Motorola and Verizon, are able to answer this fundamental question.
My Moto X (2014) can not STILL can't do, so I am wary to this model as well and rightly.
Can we please get a definitive answer?
Yes, you can get simultaneous voice and data on Verizon.
Tags: Motorola Phones
Similar Questions
-
Smartphones blackBerry simultaneous voice and data on Verizon 3 G
I got an iPhone 3G on AT & T and AT & T 3G network, I was able to use the data and voice simultaneously. This is supported on Verizon 3 G? I think not so much, but always wanted to know why this is the case.
Fix. As it is now, correct.
-
ASBL voice and data simultaneously
Anyone know why we can not make a phone call and use data at the same time on the VZW network? I am able to do that with my 1st gen Moto X, so it seems just stupid my 2nd generation cannot do.
I discovered this last week I was on the phone with my daughter and I tried searching movie times while talking to him. I thought there was something wrong with my phone until I did some quick research and noticed that it is the same for all the 2nd generation Moto x on VZW. I don't know if there is a problem with other providers.
all this is part of the improved A.s.b.l. appeal have VOLTE 'coming soon'... a giant step in the wrong direction from what I hear the bike X 2014 is not the only phone to suffer from this "feature". The droid turbo also can not do. I heard a rumour nasty that even the Nexus 6 cannot, but that sounds not just because all the specs show the antennas in the unit.
The X must wait for VZW to flip the switch and hope that it works as expected.
The other weird thing is when I talked to a technician at bike he said that X was supposed to have simultaneous voice and data.
-
Configure the VLAN voice and data in CISCO SF 300 8 P
I have a couple of Cisco SF 300 8 P and P 24 switches. I have voice and data VLANS configured as:
Data VLAN: default 145.17.59.0/24
Voice VLANS: VLAN 20 172.22.20.0/24
I have different DHCP servers regarding the data VLAN, we have a physical server that is configured for 145.17.59 * extended IP and Voice VLAN DHCP Server is configured as a router gateway with option 150.
This configuration works very well with other cisco 2960 switches and 3750 etc. except CISCO SF 300 8 P and 24 p. I tried to set up the voice and data VLAN in these CISCO switches so that phone CISCO (model 6941) should get IP of the VLAN voice and PC should get the IP address of the DHCP server on the data VLAN. I tried several techniques such as LLDP, Port-to-VLAN Config etc.
Can anyone please guide me / help on this.
Kind regards
A K.M.SayeedHi A.K.M., with Cisco phones you should be able to define simply automatic voice VLAN to be VLAN20.
ID of the vlan 20 voices
You must ensure CDP or LLDP is enabled as well. I would check in the web GUI. DHCP for phones can come from a DHCP server on a port access VLAN20 switch, or you can use dhcp for assistance to redirect DHCP server elsewhere.
If you prefer or you have problems with the CDP or LLDP, you can also program the ports as trunks and add the tag VLAN 20 for them. In this scenario, you need to ensure inter - vlan routing works and phones that download the file config with corrrect VLAN config.
These switches do not run ios, so they are similar, but different from the catalyst switches that you mentioned.
-remember messages useful rate.
-
Trouble with the voice and data Vlan vlan translate between CT3905 and SF300 - 24 p
Hey actually, we have the solution to monitoring of implementation with CT3905 phone, SF300 - switches 24 p cameras and AIR-AP1041N Access Points
We have the problem with the vlan tag in SF300 switch ports - 24 p we can´t tag vlan of the voice and data VLANs on the same port on SF300 - 24 p it is Possible or we must dedicate a port for each VLAN or ussing the same data segment of VLANs and vlan voice?
Someone has an answer or technical documentation that can help us
Best regards
First of all,
Please disable lldp transmit in SF 300 switch.
The command is "no lldp transmitted."
After you disable check the following steps.
https://supportforums.Cisco.com/docs/doc-27005
facing the same problem with cisco SG 300 and 3905 ip phone switch.
And nested thing was my 7945 and 6941 phones use to work properly, without above configuration.
Cisco 3905 became not vlan Ip address votes and even if I put static, it did not work.
After a long struggle, I was able to solve the problem. Now both phone and system work fine in the same port.
Samantha
-
Lack of voice and data at the same time kills me
After using a treo 750 (WM 6.1) on att for the past three years, I guess I did not realize the advantage of ATT and gsm in general. There are many drawbacks... mainly pricing for simple accounts (However their family plan was directly comparable to those of sprint). I constantly try to use data applications while talking on the phone without success. I started thinking that I could do without, but a week later, I still really really miss. My wife did too... because she's I usually give directions or any other web information while on the phone. There is nothing like view google satellite map to help someone make sure they are in the right place... "see a big tree on your right with a large Brown building behind it, Yes, it's that one" does anyone else have this feeling? WiFi is not an option for me most of the time.
Voice and data at the same time is not available when using any CDMA network due to network constraints. This is true for all types of phones, not only Palm or not only the Pre. Your example of electronic control or by using google maps, the gps data that can be stored before you activate the call. try to browse the web while making a call and try to go to a web page, you have never visited before, so that you know, that he cannot be a version collected page.
-
Problem blackBerry Smartphones on the use of the voice and data
Hello
When we use the Blackberry Desktop Software for backup/restore data from one phone to another, will check voice and data usage in the session "peripheral and buyer information - status remorse" also be restored from the old phone or affected by synchronization? Or will they count just use since the first use of the new phone?
Harold Lee
I have to admit, I am not an expert on this subject, but that is my impression. Once you get the new phone running, your meter would reset to zero on this phone.
-
How can I get voice and data to work with the ASA 5505?
Here's the issue I'm having. Can I get a Cisco 7940 to work behind one site to another configured ASA 5505 and I can also get data to work behind it. However, when I try to create a separate Vlan for voice and data, it does not work. Our voice VLANs on our remote sites are 172.30 and data are 172.31, when I put the inside interface with 172.31 data will work and when I on it 172.30 voice will work. I upgraded to a security more license and tried vlan3 created as voice. I have the data to the top and work but I can't get vlan3 to work. Any help would be greatly appreciated. Thank you
Here is my current config:
hostname TESTvpn
activate the password xxxxxpasswd xxxxx
username admin password xxxxx privilege 15
name Corp_LAN 10.0.0.0
name 192.168.64.0 Corp_Voice
name 172.31.155.0 TESTvpnobject-group network SunVoyager
host of the object-Network 64.70.8.160
host of the object-Network 64.70.8.242the Corp_Networks object-group network
network-object Corp_LAN 255.0.0.0
object-network Corp_Voice 255.255.255.0interface vlan2
nameif outside
security-level 0
IP address dhcp setroute
No tapinterface vlan1
nameif inside
security-level 100
IP 172.31.155.1 255.255.255.0
No tapinterface vlan3
nameif Corp_Voice
security-level 100
IP 172.30.155.1 255.255.255.0
No tapoutput
interface Ethernet0/0
switchport access vlan 2
No tapinterface Ethernet0/7
switchport access vlan 3
No tapoutput
dhcpd allow inside
dhcpd address 172.31.155.10 - 172.31.155.30 inside
dhcpd dns 10.10.10.7 10.10.10.44 interface inside
dhcpd sun.ins area inside interface
dhcpd allow insideenable Corp_Voice dhcpd
dhcpd address 172.30.155.10 - 172.30.155.30 Corp_Voice
dhcpd dns 10.10.10.7 10.10.10.44 interface Corp_Voice
dhcpd interface of sun.ins of the Corp_Voice domain
enable Corp_Voice dhcpd
dhcpd option 150 ip 192.168.64.4 192.168.64.3Enable logging
exploitation forest buffer-size 10000
monitor debug logging
logging buffered information
asdm of logging of informationoutside_access_in list extended access allow all unreachable icmp
outside_access_in list extended access permit icmp any any echo response
outside_access_in list extended access permit icmp any one time exceed
access extensive list ip 172.31.155.0 inside_access_in allow 255.255.255.0 any
inside_access_in list extended access allow icmp 172.31.155.0 255.255.255.0 any
Access extensive list ip 172.30.155.0 Corp_Voice_access_in allow 255.255.255.0 any
Corp_Voice_access_in list extended access allow icmp 172.30.155.0 255.255.255.0 anyVPN access list extended deny ip 172.31.155.0 255.255.255.0 object-group SunVoyager
extended VPN ip 172.31.155.0 access list allow 255.255.255.0 anyinside_access_in access to the interface inside group
Access-group outside_access_in in interface outside
Access-group Corp_Voice_access_in in the Corp_Voice interfaceGlobal 1 interface (outside)
NAT (inside) 0-list of access VPN
NAT (inside) 1 172.31.155.0 255.255.255.0Enable http server
http 172.31.155.0 255.255.255.0 inside
http 172.30.155.0 255.255.255.0 Corp_Voice
http 192.168.64.0 255.255.255.0 Corp_Voice
http 10.0.0.0 255.0.0.0 inside
http 65.170.136.64 255.255.255.224 outside
SSH 10.0.0.0 255.0.0.0 inside
SSH 172.31.155.0 255.255.255.0 inside
SSH 65.170.136.64 255.255.255.224 outside
SSH timeout 20management-access inside
dhcpd outside auto_config
Crypto ipsec transform-set esp-3des esp-md5-hmac VPN
crypto map outside_map 1 is the VPN address
peer set card crypto outside_map 1 66.170.136.65
card crypto outside_map 1 the value transform-set VPN
outside_map interface card crypto outside
crypto isakmp identity address
crypto ISAKMP allow outside
crypto ISAKMP policy 1
preshared authentication
3des encryption
md5 hash
Group 2
lifetime 28800tunnel-group 66.170.136.65 type ipsec-l2l
IPSec-attributes tunnel-group 66.170.136.65
pre-shared-key xxxxxoutput
int eth 0/1
close
No tap
int eth 0/2
close
No tap
int eth 0/3
close
No tap
int eth 0/4
close
No tap
int eth 0/5
close
No tap
int eth 0/6
close
No tap
int eth 0/7
close
No tapPeter,
Note that access list names are case-sensitive, so you've actually done something different from what I proposed.
Please do:
no nat (Corp_Voice) 0-list of access vpn
No list of vpn access extended permitted ip TESTvpn 255.255.255.0 everything
IP 172.30.155.0 255.255.255.0 extended vpn access do not allow any list allextended VPN ip 172.30.155.0 access list allow 255.255.255.0 any
NAT (Corp_Voice) 0-list of access VPN
In the case where you did deliberately, for example to separate the 2 acl: note that acl VPN (upper case) is also used in the encryption card, where you cannot add a second LCD.
So if you want to separate you, you will need 3 access lists:
list of access data-vpn ip TESTvpn 255.255.255.0 allow one
voice-vpn ip 172.30.155.0 access list allow 255.255.255.0 any
access-list all - vpn ip TESTvpn 255.255.255.0 allow one
access-list all - vpn ip 172.30.155.0 allow 255.255.255.0 any
NAT (inside) 0-list of access vpn data
NAT (Corp_Voice) - access list 0 voice-vpn
outside_map 1 match address all vpn crypto card
Don't know if this was also clearly to my previous message, I recommend you to replace the "all" (in each of the ACL lines) to something more specific (i.e. a remote network, or group of objects that contain the remote networks).
HTH
Herbert
-
Help the VLANS on Cisco SG200 - 08 p switch voice and data
Hi all
I'm faced with a problem of configuration on the Cisco SG200 - 08 p.
We use Cisco SG200 - 08 p on a mobile carriage which will go from classroom to classroom who will have computer and phone VoIP cisco plugged into it. The question is that each of our closets are in different VLANS (1 voice and 1 data... Let's say data vlan 20 and vlan voice 2025 for conversation) and which move towards every closet.
It would be great if I could just create a vlan voice dynamically pick up this switch upstream has however and generic data, it seems that I was failed to do.
So far, I can pass the data Vlan no probably. The upstream switch port is set to access port and a switch port access voice vlan (these are x 3750 switches)
If the above is not possible, I guess I'll take what I can get. Should I create data vlan 20 and vlan2025 of the voice on the Cisco SG200 - 08 p and make a port on the Cisco SG200 - 08 p and a trunk trunk on the 3750 x? Is there an option on the Cisco SG200 - 08 p to tag voice traffic?
I am also concerned about DRIFTING and I did not see an area in the Cisco SG200 - 08 p to set it as a customer and a transparent mode.
Thanks for any help,
Dan
Playne,
first the bad news, the switches for small businesses currently do not support VTP, they support the GVRP Protocol which is like VTP, but there is no State that the VLAN used it will not automatically learn as VTP.
You should be able to configure the 3750 as a trunk with a vlan 1U or unmarked and vlan 2025 as the tag for the voice. configuration of the port on the switch to small businesses the same way to its home port. All ports which have only phones will be 2025U of access and all ports only PC would be access 1U. All ports of phone and computer would be trunk 1u, 2025T
Cisco Small Business Support Center
Randy Manthey
CCNA, CCNA - security
-
VLAN voice and data on a single port
Hello
I have some 5548 P Dell switches, but I just Cisco environment.
I find a lot of information on this but most of it relevant to the VLAN marked and unmarked on a port in general. Some articles suggest to put the port in trunk mode...
anyway (without taking into account the QoS) how you would accomplish this example Cisco on a Dell switch:
Switch (config) #interface g0/1
Switch(Config-if) #switchport mode access
Switch(Config-if) #Switchport access vlan 50
Switch(Config-if) #voice switchport vlan 10
Thank you!
For general mode, commands would be present as follows.
Console (config) # interface gigabitethernet 0/1/1
Console # switchport mode general
Console # switchport general allowed vlan remove 10
Console # switchport General allowed vlan add 2,3,4,50 tag
Activate console # vlan VoIP
Trunk mode:
Console (config) # interface gigabitethernet 0/1/1
Console # switchport mode Trunk
Console # switchport Trunk allowed to remove vlan 10
Console # switchport Trunk allowed vlan add 2,3,4,50
Activate console # vlan VoIP
-
SG500-52-K9-NA voice and data? s
Just took a SG500-52 for the new addition of office and we just bought IP phones. I configured 1 port with vlan 41 voice given 100 shared resources and computer and telephone that work together. Even when I plug the computer directly into the switch, it still works even if the port is configured as a trunk and VLAN tagged 2? This work what's - what a smartport thing?
Hi jbpollard,
If you use a phone and a PC to a port, you must configure:
-vlan 41 tagged
-vlan 100 unidentifiedPC / laptop can mark normally not packages. This is why virtual LAN PC must not be tagged.
The IP phone can mark packets.On the other Cisco switches, you can also set the client port as trunk. But then the vlan on the trunk native must be the vlan where the PC without going into.
-
Turn off or disable the voice and data roaming notification over Vibe X 2
Hi all
-what someone has any idea how to turn off the question when you make a call outside your network home, as different country... its boring as hell and can't find the function. Phone is VIBE X 2 4.4.2
Thank you
Lollipop Android came out and fixed the "bug".
-
to access the documents and data
Hi all
I still have problems of storage management on my phone, I get help here? I see the following numbers:
Audio gb 7.05 which I suppose is including podcasts and voice memos.
Photos of 9.2 mb.
Apps for 1.59 GB.
Documents and data 2.24 gb.
Another 806,9 mb.
How to handle the last two? What could possibly be taken 2.24 GB on my phone that I can't seem to?
Documents and data includes the contents of applications. On the phone go to settings/general/storage & use iCloud and press manage storage under the rubric of storage. Lists the data used by each application on the phone.
-
How can I use FNDLOAD for XML reports and data defnitions
I program simultaneous registerd bound reports xml and data defnitions in instance of staging and managed to switch to DEV... After updating of this stage and when I download the details of DEV and transferred to the program only simultaneous scene I can download... Can we use the command FNDLOAD for definitions of data or the data model for the XML report, FNDLOAD used for the simultaneous program, he transferred only the details of the program at the same time.Hello
Use XDOLoader.
Note: 469585.1 - how to use XDOLoader?
https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=469585.1Kind regards
Hussein -
I replaced my original Apple Watch with a watch of S2. When I install and associate the new watch and my iPhone 7 more, is there any way I can restore all applications, configuration info and data between the original and the new shows, so I don't have to start from scratch?
Try this procedure
Cancel the twinning of your iPhone - Apple and Apple Watch Support
Maybe you are looking for
-
Not able to connect to our Web site with FF 31.0
I have no problem connecting on other browsers. No error message. It doesn't do anything. I can connect to another system and even our QA system. I already deleted the cache. Did not help.
-
Time to master before sleep password control
On my computer, my screen goes to sleep after 15 minutes of inactivity. By clicking on any button restores the display without the master password. The master password is required after 3 hours of inactivity. It is a period that I chose several years
-
Hello I have a Nexus 4 upgraded to 4.4.2. First time I tried the SBH52 I have already installed the app (but not SmartConnect). The phone detected the headset but it workaed like a helmet standard (it has not begun the SBH52 app). I tried to install
-
Cisco RV016 not so Intelligent Balancer
Hi all We have a problem with our routers of Cisco RV016 (we have 12 of them). Somehow the routers keep switching randomly between internet connections. (2-3 connections per router) We want to completely disable the load balancing and just use the in
-
Impossible to print using color HP Laserjet 3700dtn
Original title: Hp Color Laserjet 3700dtn Hello Machine to win 8 (64) but cannot print to the local printer HP3700. Cannot print get or error status messages. Latest, downlaoded PCL6 driver installed in USB mode without success. List of specified dev