Since the execution of an update of windows, I still lose my two network icons in windows Explorer.

Similar Questions

• Anyone having problems with the BT Home Hub 5 since the firmware has been updated two weeks ago?

  Since the firmware has been updated a couple of weeks, my air 2 canned disconnection from the wifi ipad. And if she's not be disconnected it asks the router to renew the lease every few minutes. Sometimes I can't the internet connection, other times I have connection, but used to play embedded videos.  I have to turn the ipad works to recover.

  In addition, my ipad think that the ip address is 127, but my router it's 115!

  I tried BT, but British users will know it is terrible, they are.

  Anyone with problems and suggestions? I tried everything until and including resetting the network settings. I'm sure it's the router.

  Hello

  If you can afford to buy your own router this will work much better

  I use a Netgear without problems 6300rv & double speed

  Works even at the top of the long garden.

  If you are not bound to bt try Plusnet based in Sheffield

  Very good at solving problems.

  See you soon

  Brian

• My stop then from the installation of an update of windows phone!

  The battery died in the middle of an update of windows. Now, the system does not load wltray.exe (I guess that his corrupt) and I get a message that my WIRELESS card does not work.

  I tried system restore and that does not work, what is the best way to resolve this corrupt file? I prefer not having to reinstall windows. : P

  Thanks in advance
  -Allan

  Hi Allan,

  Welcome to the Microsoft Answers site!

  Update installation?

  All updates are installed correctly on your computer?

  Method 1:

  You can check if all updates have been installed successfully on your computer. To check

  1. click on Start Orb

  2. in the start menu search bar type Windows Update and press ENTER.

  3. in the left pane, click view update history and check if all updates are installed successfully or not.

  4. If updates failed, then uninstall it and try to install manually and check if that helps.

  Method 2:

  If this does not help, you can try to start on the last good known Configuration and check if that helps. Starts Windows with the last configuration of registry and the pilot who has worked successfully.

  Steps to start last good known Configuration

  Follow these steps:

  1. Remove all floppy disks, CDs, and DVDs from your computer, and then restart your computer by clicking the Start button, clicking the arrow next to the shut down button, and then clicking restart.
  2. Do one of the following:
     • If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by stopping and restarting your computer.
     • If your computer has more than one operating system, use the arrow keys to select the operating system you want to start, and then press F8.
  3. In the display Advanced Startup Options , use the arrow keys to select last known good Configuration (Advanced), and then press ENTER.
  4. If your computer has multiple operating systems installed, use the arrow keys to select the operating system that you want to start using the last good known Configuration, and then press ENTER. Windows will then resume starting normally.

  For more details follow the link below.

  Using the last good known Configuration

  Let us know what is happening in the last known good configuration.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Where can I find the Roll Up 2 update for Windows Media Center Edition 2005?

  I'm trying to download Media Player Version 11 and it says that I need to first install the Roll Up 2 update for Windows Media Center Edition 2005.

  Hello

  Before installing Windows Media Player 11 on Windows XP-based computer, you must download and install the Update Rollup 2 for Windows XP Media Center Edition 2005 on your computer.
   
  Initially, download cumulative update 2 for Windows XP Media Center Edition 2005 from this link.
  
  Update Rollup 2 for the Windows XP Edition Media Center 2005 (KB900325)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=12939
   
  Check out the link below to install Windows Media Player 11 on Windows XP.
  Windows Media Player 11 for Windows XP
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=8163
   
  For more information, see Help links.
  File Readme for Windows Media Player 11 for Windows XP
  http://Windows.Microsoft.com/en-us/Windows-XP/products/Windows-Media-Player/11/Readme
   
  Update Rollup 2 for Windows XP Media Center Edition 2005
  http://support.Microsoft.com/kb/900325
   
  It will be useful.

• I tried to update my windows Explorer, but I get a message saying "Service Pack is not supported". When I try the link to get an update, it fails.

  My e-mail link has a s aying of message that the system is no longer supported with a link to get an update. When I try the link, I get a message saying "Service Pack is not supported" with a link to get an update. When I try the link, it fails.

  Hello

  1 did you change on your computer before this problem?

  2. update you are trying to install?

  3 are. what email link you referring?

  4. you receive an error message?

  Follow the suggestions and see if it helps.

  Method 1

  Run the system update readiness tool, and then check.

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  http://support.Microsoft.com/kb/947821

  Method 2

  You can reset the Windows Update components.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  See also:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Is the function of automatic update of Windows found in the use of control panel of your compensation for the use of the Internet from my ISP?

  Original title: Windows updates

  Is the function of automatic update of Windows found in the use of control panel of your compensation for the use of the Internet from my ISP? If so, how? In addition, how to hide an update, I don't want to? For example, I use (and I'm happy with) Windows Internet Explorer (v7), but receive reminders to update update to Internet Explorer v9, which I don't want.

  Is there a way to prevent Windows Update for sending this reminder in the future?

  Geoff

  Hide and Yes will use you PSI data usage. It depends on how much the updates install you, on the amount of data it uses

• Windows displays the device works correctly. However, the device does not appear in windows Explorer. also, I can not format disks.

  Windows displays the device works correctly.  However, the device does not appear in windows Explorer. also, I can not format disks.

  What should I do next

  Hello

  1. Are you referring to the NEC USB Floppy Driver?
  2. You try to format floppy disks?
  3. Was - this earlier work, if so, did the chnages on the computer before this problem?

  If it worked, I suggest the following methods and check the status of the issue.

  Method 1:

  Open the hardware and devices troubleshooter.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• I want to display the Nikon D7000 .nef files in Windows Explorer/widows Webcam live picture and use some ice with them in Windows Vista.

  I want to display the Nikon D7000 .nef files in Windows Explorer/widows Webcam live picture and use some ice with them in Windows Vista. I think that Microsoft's current camera raw codec not support.nef files from Nikon D7000. Furthermore, I would also like to use Adobe .dng files in files. VISTA has native free codecs for the same. Please season a solution?

  original title: Micorsoft Camera Raw Codec

  As far as I lnow... the following codec pack is
  the most current available from Microsoft.

  Microsoft Camera Codec Pack
  http://www.Microsoft.com/download/en/details.aspx?ID=26829
  (Windows 7, Windows Vista Service Pack 2)
  This package will allow RAW supported
  camera files visible in Windows Explorer

  The following retail software is not Microsoft
  but maybe worth a visit:

  FastPictureViewer Codec Pack
  http://www.FastPictureViewer.com/codecs/

• How to display the size of the file in my computer or Windows Explorer?

  When you open my computer or Windows Explorer, there is an option to display the 'size', but it does not for the record, only the files in the folders. How can I automatically see sizes of the entire folder without going through a right click and see the properties on each folder or without having to go on the record?

  When you open my computer or Windows Explorer, there is an option to display the 'size', but it does not for the record, only the files in the folders. How can I automatically see sizes of the entire folder without going through a right click and see the properties on each folder or without having to go on the record?

  Hello

  Windows Explorer has never included the ability to display folder sizes.

  There are third-party modules that can do it. Use your favorite search engine to find these.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• Explorer Windows in Windows 7, do a right-click in 1 of the 4 causes of hard drives Windows Explorer to stop

  Win 7, Windows Explorer, right click in the right hand only, Panel 1 of 4 hard drives causes Windows Explorer to stop.  The disk in question has been removed from my previous XP machine and inserted in it and a lot of files of data on it.  The other three disks were new and white discs.  All are formatted with NTFS and the disk in question worked well in my previous XP machine.  I have noticed no other problems with the drive.  Any suggestions as to what may cause this weird behavior and what I can do about it?  Thank you, gmhope

  This could be a problem caused by an incompatibility between the different version of your bios on your xp machine. BIOS not all do the same things in the same way, I was taught that a hard drive from another machine may not work in another with a different bios. The bios needs flashing on the screen when you start, bios award, a commune is an example. If you start them both and they are both the same bios is not the cause, if they're differentmaybe that's the problem . If you no longer have your xp machine then it's not a way to say average ither.

  But I suggest that you try to browse the disk using something else then windows Explorer (to avoid problem explorer).

  Open the run command on your Start menu and type cmd this will open a command prompt.

  Once opened type in the letter of the drive then an example of the colon (e :))

  Pressing on enter you will now be in this drive, and then type dir and then press ENTER, this will bring up a list of files. If these steps work for you and are able to see the content of the file on your drive is intact, but there is a problem in Explorer that prevents you to use it.

  If it solves your problem, click on the link "Propose as answer" below and vote as useful by clicking on the green triangle on the left.

• Topic shows in the project manager, but not in Windows Explorer

  Hello

  I have an A project topic that I would like to import into the project B. When I work in project B and click import and watch the list of topics in project A, I don't see the topic I need. However, if I open A project, I can see in the project manager. The section opens and appears in the table of contents correctly.

  I don't know what is happening or how to fix this. I am reluctant to experiment because I myself got subject struggling outside the project before moving.

  Thank you

  MDawn

  I thought to it after I posted my question. I opened the Properties section and the name of the file is different than the title of the topic. Of course, in Windows Explorer, I saw the file name, not the name of the topic.

  Thank you

  MDawn

• HP Pavilion Notebook 15-p119: Windows 10: since the execution of Windows update, I can't connect to the wireless network

  Hello, HP assistance.

  I'm having a problem with the connection to my home Wi - Fi network. I am sure the problem has nothing to do with my material and is a problem of Windows only.

  Here's the story: I was fortunately with the Internet from the network before and Windows was connecting automatically every time. But since the Windows Update recently it does not connect. Sometimes it says "unable to connect to this network" and then sometimes it comes up with a box asking me to enter a user name and a password. The thing is... I've never set up a password in Windows for Internet access, so I do not know why he was asking me now. I looked around the Internet via my Tablet (which is connected to the same Wi - Fi network fine, with my phone) and found that it is a common problem. And yet, none of the solutions work for me.

  I wonder if the solution is somehow change the settings so that a password is not required to connect to a network. Or maybe enter a default user name and password when the box appears again. That said, the box did not come for a while.

  Help, please!

  Thank you for your query.

  I understand that your mobile phone works well and you didn't have any problems with your wireless connection. After the upgrade to Windows 10, your wireless network is intermittent and will prompt you for a user name and password.

  The guest is not the Internet, but rather to join your network. He is looking for the network name and password.

  When I did a search for HP laptop 15-p119, I was unable to locate this model. Would you please check your model? How can I find my model number or product number?

  After the upgrade to Windows 10 did you all your Windows updates?

  Sometimes it fails to be installed automatically, if you can try running the Troubleshooting of windows update. to maybe gain others.

  You run the HP Support Assistant since the upgrade?

  If the problem persists, once you have established a test of Wi - Fi automatically update drivers Device Manager wireless.

  • Right click on the Windows button in the bottom left corner, then choose Device Manager

  • Click network to expand the list

  • Right click on the wireless adapter and choose put updated driver

  Select "Automatically search for updated driver software" this month may start a download to install a newer driver.

  Here is a link that can also help. HP PC - troubleshooting wireless network and Internet (Windows 10) 

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as yourself. Please consider tagging the post in order to resolve your problem as " ""Accept as Solution"" " to help other members of the community!

  "To show recognition for my efforts, please click on the" ","inch Up Icon " below.

• Since the Thunderbird 38.0 update my computer crashes whenever I start Thunderbird. CAUSE: the sounds associated with a new message notification?

  I am able to use it in Windows safe mode but that is awkward. My computer works fine in normal mode as long as I do not open Thunderbird. Is it possible to go back to the old configuration of Thunderbird. I love the program but it is not very good like that. I tried running Thunderbird in its safe mode by pressing the SHIFT key, when I started to Thunderbird, but it came not in safe mode and the computer froze.

  Wayne Mery said

  rcharlie said

  I had this problem too. He has not happened since I disabled the new message alerts (not only sounds, but the popup and tray icon). It was freezing at startup only when there are new messages so he could get when I started upward. At least one of the freezes have shown the popup in part drawn on the screen, until all of the computer does not meet all, but hold the power button.

  rcharlie, I think your problem is different. I helped someone a few hours ago with similar symptoms where helped to disable alerts. And then, we determined that alerts could be activated IF we have disabled hardware acceleration to tools | options | Advanced | in general.

  rcharlie, what it do work for you?

  Yes. Or rather, the test message, I sent with hardware accel disabled and alert activated has not crashed the computer. Will update if it crashes again.

• Error codes 78(f)), 80070308 and 8007000 D (failure of the installation of 12 updates in Windows 7 HP64)

  No idea what to do now. I tried to select only some and even unstalling all updates and walk away with the prize, but nothing helped. I ave nothing else running while I update - except Microsoft Security Essentials, but I even tried to disable the protection in real time, just in case. I checked the current process (from all users) as well. All drivers are up-to-date and legitimate. Material is all compatible and still pretty soon, lots of storage to drive HARD to the left, etc.

  Here are the updates failed, copied and pasted in the same order, if this is useful: [-Cumulative Update for Media Center for Windows 7 x 64-based Systems (KB977863), a security update for Windows 7 for x 64-based systems (KB971468), a security update for Windows 7 for x 64-based systems (KB975560), a security update for Windows 7 for x 64-based systems (KB978251)] Update for Internet Explorer 8 Compatibility mode list for Windows 7 for x 64-based systems (KB978506) update for Rights Management Services Client for Windows 7 for x 64 systems (KB979099), update for Windows 7 for x 64-based systems (KB976264), update for Windows 7 for x 64-based systems (KB976662), update for Windows 7 for x 64-based systems (KB977074) [, update for Windows 7 for x systems 64 (KB978637), update for Windows 7 for systems based on the x 64 (KB979306), games for Windows LIVE V3.2-]

  There are a few updates which installed OK. Pretty well the other critical and recommended updates for Windows 7 HP64, I guess. I could list these if need be.

  Ideas as a) what is the problem, and b) what can I do about it? Thanks in advance.

  You can start an incident of free e-mail support: https://support.microsoft.com/oas/default.aspx?gprid=6527 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• What is the fastest way to update to Windows XP?

  original title: I need to update a computer that have not been updated since 2008. How can I do without going through the long process of the computer looking for available updates?

  It's Windows XP. I had changed our PC and it has been stored. I had someone who wanted a computer but could not afford so I gave to them. But now, to bring it up-to-date, how do about it?

  Hello

  Configure automatic updates and see if it helps.

  How to configure and use automatic updates in Windows

  Hope this information helps.