single ap and multiple SSID

Similar Questions

• Unique to the multiple SSID and possible access point single channel?

  Hello world.

  I have a silly question.

  Let say, we have three VLAN, vlan1, 2, 3 and they are mapped to the following wireless LANs:

  VLAN 1 ssid1

  VLAN 2 ssid2

  Vlan3 ssid 3

  AP - trunk - dagprogramm network.

  Our access point has mobile devices in three local wireless networks, IE ssid1ssid2 and ssid3

  Since the mode AP use half duplex, mobile devices need acknowledgement positive to ap they can send data, so once channel let channel 3 (assuming that 802. 11b is used) can be shared by all the devices in three local wireless networks.

  My understanding is correct?

  Thanks and a great weekend.

  An access point = an associated action related channel and each ssid and the customer that one channel and the AP is essentially as a hub

  concerning

  Joe

• How to merge multiple images into a single document and place them on the bottom

  I am trying to merge multiple images in a single document and arrange them on this document and save it.  Is it still possible?  There are five black and white drawings that I've resized at all have the same size.  Tutorials that I looked at, but it seems that everyone has another way to do this and all are very confusing.  Thanks for your help.

  It is not surprising that "everyone has a different way to do this." In Photoshop that is common. Try this:

  1. open a new file large enough to accommodate five drawings.

  2. open each design, click on it in the layers panel and drag and drop it in the layers panel to the new file.

  3. Repeat until all are in the new file

  4. use the move tool to reposition. (They are on separate layers)

  5 flatten the file if you wish (but save a version not flattened for future editing)

• Multiple SSID on AIR-SAP702I-E-K9 (700 Aironet Access Point)?

  Hello community

  I wonder if it is possible to simultaneously run multiple SSID (actually 3) on a single Cisco AIR-SAP702I-E-K9, which is a standalone AccessPoint (AP). Each SSID should be linked to a different VIRTUAL LAN. Or do I need another model or even an AccessPoint driven by the controller to run multiple SSID on different VLANS to the same AP?

  Thanks in advance.

  Kind regards
  Adrian

  Hi Adrien,.

  Yes, you can have multiple ssid on the AP standalone. Each SSID must be mapped to a VLAN different.

  Kind regards

  Shubham

  Please do not forget to note positions that answered your question and mark as answer or was useful

• Unique SSID from the multiple SSID

  Hello

  We seek to deploy wireless at five sites great campuses, one in each State.

  Does anyone have any ideas on the deployment unique verus multiple SSID SSID for each location.

  Are the benefits of filing a return and security to identify red devices associated with

  a unique SSID.

  The question was raised that it would be easier to configure one SSID to scan wireless

  devices that have separate SSID different places.

  Would appreciate any experience on this design

  Mate,

  Remember, when you're dealing with WLC, you do not configure the APs.  You configure the WLC and configs will be propatated of all APs manages the WLC.

  The WLC, you can use up to 18 SSID but you can configure 1 024.

  Currently, I have three SSIDS and one of them is for VoWLAN.

  Moreover, some hand scanners do not like the (hidden) SSID broadcasting.

• Disseminate the Multiple SSID

  Hello

  I have an AP 1252 and I wanted to know what I need to do to set up to broadcast multiple SSID

  y at - it something I need to do on the web interface or something through CLI. Thanks in advance

  and have a great day.

  Please copy - paste the 'controllers to see the output. This will let us know if we can or we cannot broadcast multiple SSID.

  The command to enable this featute is...

  AP (config) #int dot11 0

  AP(Config-if) #mbssid

  SSID #dot11 AP (config)

  AP (ssid-config) #no - guest mode

  AP (config-ssid) #mbssid - guest mode

  SSID #dot11 AP (config)

  AP (ssid-config) #no - guest mode

  AP (config-ssid) #mbssid - guest mode

  This will do

  Concerning

  Surendra

• BVI Interface inaccessible since the addition of multiple SSID

  Announcement to the community for the first time.

  I have a simple HomeLAN which consists of a Cisco router for series 800-> switch PoE Cisco3560-> Cisco Aironet 1131AG Access Point.

  Everything works well for a while in which I had a simple port to "change the access mode" configured on the switch facing the AP and one SSID on the access point that is configured in stand-alone mode (without controller).

  My provider has enabled IPv6 on my broadband connection and I started to reconfigure my installation this afternoon to allow this.

  I decided to run only a bunk Dual LAN and a separate native IPv6 only test LAN for proof of concept.

  With this in mind, I changed the switch port to the access point to a "mode trunk switch' using simple dot1q encapsulation. I have also consulted the post helps very https://rscciew.wordpress.com/2014/05/24/multiple-ssid-configurations-on... after finding in this community post on the topic of multiple SSID https://supportforums.cisco.com/discussion/10899511/how-broadcast-2-ssid...

  I have now two SSID broadcasting (we will call double stack and ipv6 only for the sake of the argument). The SSID double stack uses VLAN 2 and 1 bridge, while the SSID only ipv6 uses 6 VLAN and bridge 6.

  I must stress at this point that my router (where I want to layer 3 for the two LANs gateways) I have DHCP, DHCPv6 and SLAAC configured on relevant VLANs.

  I seem to be the 2 VLAN trunking of properly and I can see the SSID broadcast in my house. I can connect to the SSID (authenticate and form an association as seen in 'show the dot11 association'), but I don't get an IPv4 address or IPv6 assigned to all clients (I tried Mac OS x, iOS, Android, and Windows phone). Furthermore, I can't ping the IP bvi1 of the AP - that is the element that is annoying me more that I must console to the AP to make any changes at all.

  Here is an overview of my AP configuration, with relevant parts removed for safety...

  dot11 syslog
  !
  dot11 said ipv6 only
  VLAN 6
  open authentication
  shared authentication
  authentication wpa key management
  MBSSID-guest mode
  WPA - psk ascii 7
  !
  dot11 said double stack
  VLAN 2
  open authentication
  shared authentication
  authentication wpa key management
  MBSSID-guest mode
  WPA - psk ascii 7

  interface Dot11Radio0
  no ip address
  no ip route cache
  !
  the cipher mode vlan 6 encryption tkip aes - ccm
  !
  the ciphers of vlan 2 encryption tkip aes - ccm mode
  !
  has declared ipv6 only
  !
  such double stack
  !
  MBSSID
  root of station-role
  Bridge-Group 1
  Bridge-group subscriber-loop-control 1
  Bridge-Group 1 block-unknown-source
  No source of bridge-Group 1-learning
  unicast bridge-Group 1-floods
  Bridge-Group 1 covering-disabled people
  !
  interface Dot11Radio0.2
  encapsulation dot1Q 2
  no ip route cache
  Bridge-Group 2
  the bridge-group subscriber-loop-control 2
  Bridge-Group 2 block-unknown-source
  No source of bridge-Group 2-learning
  No extinction unicast by bridge-Group 2
  Bridge-Group 2 covering-disabled people
  !
  interface Dot11Radio0.6
  encapsulation dot1Q 6
  no ip route cache
  Bridge-Group 6
  the bridge-group subscriber-loop-control 6
  Bridge-Group 6 block-unknown-source
  No source of bridge-Group 6-learning
  No bridge Group 6 unicast-flooding
  Bridge-Group 6 covering-disabled people
  !

  interface FastEthernet0
  no ip address
  no ip route cache
  automatic duplex
  automatic speed
  Bridge-Group 1
  No source of bridge-Group 1-learning
  Bridge-Group 1 covering-disabled people
  !
  interface FastEthernet0.2
  encapsulation dot1Q 2
  no ip route cache
  Bridge-Group 2
  No source of bridge-Group 2-learning
  Bridge-Group 2 covering-disabled people
  !
  interface FastEthernet0.6
  encapsulation dot1Q 6
  no ip route cache
  Bridge-Group 6
  No source of bridge-Group 6-learning
  Bridge-Group 6 covering-disabled people

  Bridge IRB

  1 channel ip bridge

  interface control2
  MGMT AP Interface Description
  address 192.168.1.6 IP 255.255.255.0
  no ip route cache

  IP default-gateway 192.168.1.50

  As you can see I can not ping the gateway of AP - I would be very grateful if someone could point me in the right direction with regard to what I'm doing wrong here?

  Thank you

  Mick

  OK means your AP is to have IP vlan2:

  Do it like this and try again:

  !

  interface Dot11Radio0.2
  encapsulation dot1Q 2
  encapsulation dot1Q 2 native
  Group 1 bridge
  Bridge-Group 2
  !
  interface FastEthernet0.2
  encapsulation dot1Q 2
  Group 1 bridge
  encapsulation dot1Q 2 native
  Bridge-Group 2

  !

  Or alternatively, you can delete the name native dot11radio0 and fa0.2. (It should also work without it), but be sure that for vlan 2 you have bridge Group 1.

  Concerning

  Remember messages useful rates

• Multiple SSID for AP in light mode

  Hello

  I tried to configure an AP that is light to have multiple SSID mode, as I do with autonomous AP but I couldn't, is it possible for an AP in light mode to have multiple SSID? If so, how can I do that?

  Thanks in advance for your help.

  supported wireless LANs is 512 and the AP you're just 16...

  http://www.Cisco.com/en/us/docs/wireless/controller/5.2/configuration/guide/c52wlan.html

• Can I purchase a single license for multiple software? Buy one for a single application, buy another one for another, etc.

  Can I purchase a single license for multiple software? Buy one for a single application, buy another one for another, etc.

  You can purchase the license but on different emails if you need to use them on multiple computers. From an e-mail, you can install software on both computers. These two computers can be Windows, Mac OS, or everyone. If you install on a third computer, you will be asked to turn off this feature on the other two computers. You can then re-enable one of the two previous computers and use Cloud Creative apps on it.

  Kind regards

  Hervé Khare

• Single VMDK for multiple virtual machines in esx3.5?

  Hello

  Is it possible to use a single VMDK to host several VM in ESX3.5 or is this feature on the way?  I think the vmware view tech that allows you to host multiple virtual machines to a single image and store only the deltas for VMS replca.

  We organize several ts who are about 12 GB per image, and each server is essentially the same.  It would reduce the space if these could be consolidated at the level of vmware.

  Thank you very much.

  What you are referring to the notion of linked Clones, it's something completely different to share a single VMDK.  with linked clones, you actually run mulitple copies of a single Machine.  This fuinctionality is not available in ESX Raw but is a characteristic of Lab Manager and VMware View Premium.

  If you have found this device or any other answer useful please consider useful or correct buttons using attribute points

  Tom Howarth

  VMware communities user moderator

  Blog: www.planetvm.net

• I have different bookmarks I want to keep on each computer, synchronization will delete the bookmarks on a single computer and replace the bookmarks from another computer in their place

  I have not yet used sync, but I sense it's going to be a problem if I do. I have different bookmarks I want to keep it on each computer. Sync will delete the bookmarks on a single computer and replace the bookmarks from another computer in their place? So I think that will erase the bookmarks on the second computer you configured to synchronize. Is there a way to merge bookmarks on every computer in the library of a bookmark that contains all bookmarks on both computers, so I'm not all bookmarks in sync?

  Just to be clear, this is something that we have commented several times in the forum, Firefox Sync adds everything that is already in the device for the account and pushes this info for the rest of the devices.

  So if you have 2 computers with data X and the other with the data from there, once you set up synchronization in both computers you will have X + Y at the same time.

  I hope that clarifies the doubts...

• How can I get the tabs to go on a single line and a menu of Firefox?

  Firefox allows to have 2 lines above - Firefox menu with tabs and more and another line of the navigation toolbar. during the installation of some programs online, Firefox now have 3 lines at the top, with the Firefox menu on an entire line, the 2nd line of tabs and 3rd line of navigation toolbar. How can I get the tabs to go on a single line and a menu of Firefox?

  With the current versions of Firefox, you can choose to use the menu of Firefox (orange in windows; gray Linux) button at the left end of the Windows title bar or bar menus familiar as in earlier versions. The Firefox button is displayed by default only in Windows Vista and Windows 7, but you can turn on or off or switch between the two or temporarily show the menu bar when the Firefox button is displayed.

  • See how, click here-> https://support.mozilla.com/en-US/kb/common-questions-after-updating-firefox#w_why-are-the-menus-file-edit-view-etc-missing
  • Other changes after the upgrade-> https://support.mozilla.com/en-US/kb/common-questions-after-updating-firefox

  If you chose to use the Firefox button and you use the default tabs on top, the tab bar will move to the title bar with the Firefox button only when you are to maximize window (the ' square' the middle button in the upper right corner of the Windows standard application window). Other selected toolbars will be displayed below that (bar Navigation, Bookmarks Toolbar and the toolbars you add via Add - ons).

  • For toolbar, see Selections-> https://support.mozilla.com/en-US/kb/Back%20and%20forward%20or%20other%20toolbar%20items%20are%20missing

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You must update some plug-ins:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• Homegroup and multiple user account problems

  I have been searching the net for information and can't find anything that matches.  I'm having all kinds of problems through the homegroup and multiple user accounts.

  I would like to know: when a machine (laptop in this case) is off the network, the individual user accounts will remain visible under homegroup?

  If they are not, then homegroup is not for me.

  UPDATE and closing:

  I confirmed that the individual accounts of the user on a machine that visible to another when this computer is connected to another group residential computer on a local network domestic.  Why they don't look just like a homegroup internally I don't get except that the machine would always be part of a group residential e.g. a laptop, as in my case, would be carrying a homegroup with it and not be able to jump on another residential group in a different location.

  What was causing me a lot of trouble has AVG Free.  Attention, the installation of AVG Free homegroup PCs cannot meet or is inconsistent at best.  My laptop would show the user accounts, but not the other homegroup PCs and both could indicate that there is no other available HG machine or sometimes invites you to create a homegroup.  It was a nightnare.

• Issue of multiple SSID AP1131

  Hello

  New Cisco wireless, try to understand this.

  I have an ASA who must manage traffic VLAN.

  Vlan1 = default VLAN internal.

  = Reviews VLAN10 VLAN.

  On my AP1131 I want to have "Editorial" associated SSID VLAN1,

  and "Guest" SSID associated VLAN10.

  6 & 7 on the ASA interfaces are PoE so I think I'm good on that.  I have these two ports on the SAA set to Vlan1 and trunks natively.

  My biggest pain is that moment that I can't get 'Guest' and 'Editor' broadcasting at the same time!

  I don't really have a need for 'A' radio, so I'll just try to get the two SSID broadcast on the radio of 'G '.

  I'm setup via the user interface, but frequently glancing at the CLI.

  Is this a common problem?  Something that someone can point to a common mistake?

  Joined running-config; Although I am still much play with him.

  Hi Scott,.

  Check out these excellent two related threads

  https://supportforums.Cisco.com/message/1308205#1308205

  https://supportforums.Cisco.com/message/1286462#1286462

  See you soon!

  Rob

  Thank you to support CSC helps Haiti

  https://supportforums.Cisco.com/docs/doc-8895

  https://supportforums.Cisco.com/docs/doc-8727

• About WLC "one-to-many" designates a LAN VIRTUAL mapped to multiple SSID possible?

  The Cisco Wireless LAN Controller Architecture includes this feature (possibility of configuration)?

  You can map multiple SSID to a VLAN, but you cannot map several VLANS on a SSID.