Siri and audio recording does not
Hello
the audio recording with my front camera does not work and Siri cannot hear what I say.
All the other stuff that needs a microphone works perfectly and I installed the latest version of IOS
Hope someone has an answer to this problem
Vanessa
Hello
Try following the steps outlined here:
- Siri to use on your iPhone, iPad or iPod touch - Apple Support (see 'Get help').
Tags: iPhone
Similar Questions
-
Dynadock U3.0 LAN and Audio driver does not.
Installed according to the instructions on the no fare of Lenovo IdeaPad U510 obstacles. USB and video ports works OK, but I have no ethernet connection and no sound.
After checking the Device Manager, there is a problem with the drivers. But I can not find the drivers for the Ethernet and Audio... only for video :(
I tried to reinstall the drivers on non-tariff barriers, but no effect...
Please can someone help me?
Thank you
> After checking the Device Manager, there is a problem with the drivers. But I can't find the drivers for the Ethernet and Audio... only for the video
There is no drivers for the sound or LAN. These drivers would be installed automatically by the Windows operating system
The Dynadock supports own graphics chip and therefore you need to install the graphics driver.But if you don't have audio output, try this.
Go to control panel of-> sound-> the Read tab
Right click here and choose two options (display, devices see the disabled)
Now you must select the default device for audio output.Regarding LAN:
Try to transfer the authentication settings of the internal to the external network adapter.
Open the properties of the internal network card and choose the parameters of the tab "authentication."Now check the option titled enable IEEE 802. 1 x authentication for this network
Choose EAP type: EAP (PEAP)Also check the option called authenticate as computer when computer information is available
After you apply the settings on this tab map LAN Dynadock, it should work without any problems.
By the way: you can download here the Installation Dynadock U3.0 disc (it is the backup copy of the disk in the software box)
http://www.MyToshiba.com.au/support/accessories/port-replicators/pa3927a-1PRP/download?OS=25
-
No system sound and audio icon does not appear in the notification area
sound problems
Player windows media are the only sounds that work on my computer. Unable to get sound when on the internet or other windows sounds. also the volume icon disappeared completely from the notification bar
Hello
1 Please reboot nothing so interfere with this process.
Click with the right button on Taskbar - Properties - tab Notification area - check box Volume - if it is grayed out
Then, use this link.How to enable or disable the system tray in Vista icons (there are several methods
and you can to use them all).
http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.htmlIf necessary: a Mr Fixit
System icons do not appear in the notification area in Windows Vista or in Windows 7 until you
Restart the computer
http://support.Microsoft.com/default.aspx/KB/945011============================================================
When the icon is back - Double click on it see - mix - if all the elements are DUMB or sliders down all the way.
-------------------------------------------------------------------------------------------------------------
After above, if you have still no Internet sounds. (Be sure to check the MIXER you start one
audio programs just in case where for MUTE or a slider is broken).IE - Tools - Multimedia Internet Options - Advanced tab - check sounds in Web pages
APPLY / OK - close and restart IE.If it has been verified - uncheck the box - APPLY / OK - close and restart IE - then go back and re-check.
APPLY / OK - close and restart IE.Solution to Youtube or other Flash video embedded no sound in external websites
http://www.mydigitallife.info/2007/08/16/solution-to-fix-YouTube-or-other-embedded-Flash-video-no-sound-in-external-websites/and, if necessary:
Adobe Flash no sound WaveMapper trick
http://www.mydigitallife.info/2007/08/15/Adobe-Flash-no-sound-WaveMapper-trick/--------------------------------------------------
You need to maybe uninstall and reinstall Adobe Flash
How do I uninstall the plug-in Adobe Flash Player and ActiveX control
http://kb2.Adobe.com/CPS/141/tn_14157.html
Install Adobe Flash Player
http://get.Adobe.com/flashplayer/I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
No sound. SoundMAX and Audio device does not.
Having a situation on Win xp. No sound.
Through "Audio device on High Definition Bus" gives Audio Device Manager with a yellow exclamation point and a code 28.
Try to install the update of readers prove to be fruitless.
Another piece of information that COULD help is "Soundmax cannot load correctly, you may need to reinstall soundmax" at startup.
I'm afraid that I have more bullets.
I think that it is time to raise the white flag and order a set of recovery disks.
Call HP at this number 1-800-334-5144 and tell them you need a set of XP Recovery discs for your PC.
You will need to provide the model number and serial number.
Cost will be $ 10. A good price to pay to get rid of this problem.
You will get two discs... an OS install disc and a disc driver and application.
You install XP first and then you can autorun disk driver and application.
If you encounter a cold beer, disc will install all the software and drivers for the PC automatically.
When it's done everthing should work just fine.
You can even turn off things you do not want to install before you begin.
-
Functions blackBerry Classic Custom Contact and profile recording does not
Just got my new classic and I * love * it!
I'm trying to solve a few quirks that could help me...
I've got 3 of my albums set up contacts for specific colors of sound notifications and notification LED
They are saved, but they do not appear as such when I get texts from them
Also, I tried to define the profile of the phone calls only to vibrate for text messages and 'Whatsapp' but it doesn't.
What I'm missing here?
Thanks in advance!
You cannot set individual customizations for the only 'Phone calls' profile You can only do this for the "Normal" profile
If you need more of a personalized profile, I create a new call 'Phone calls + texts' and customize it.
-
Laptop Pavilion dm1 4010us and beats audio Panel does not work.
I have a pavilion dm1 laptop 4010us, running windows 7 64 bit and beats audio Panel does not work. I click Start, Panel, Sound and the Beats Audio Control Panel icon is there, but nothing happens when I click on it, so I can't change my audio settings. Help, please
Hello
Try to use Recovery Manager to reinstall the IDT HD Audio Driver (this will also reinstall the Beats Audio interface) - how to use the Recovery Manager to reinstall the drivers and software is detailed in the document at the link below.
http://support.HP.com/us-en/document/c01868333
After reinstalling, restart the laptop.
Kind regards
DP - K
-
Satellite L300-19F and WXP - audio device does not work
Hello
I installed Windows XP Home edition on my Satellite L300-19f after change SATA compatibility I installed Windows XP Home edition and installed all the drivers and everything's fine, but the audio device does not work. I downloaded the driver from DOWNLOAD & support center, but he can not detect.
BTW: he used to work on Vista.
What should I do?
And thank you-Download driver audio Realtek HD Realtek page.
-Go to the Device Manager
-Remove the sound card.
-Remove the High definition Audio Controller
-Restart the laptop.
-Reinstall the Realtek HD audio driver -
Video recorder does not work after a while to 9700 and 9000
Hello
When I try to record videos on my series of blackberry bold 9700 and 9000 it does not work properly.
It record video for a while after that he'll I'll stop recording. I am trying to use the socket for the recording of the video connection. My code works fine on storm9550.and also I added a playerlistener and in the events of update of the player, it shows event as error and event day that null.and when I try to change the image of the camera or pass command to any other fields it will stop recording
I enclose my code as well as this.
Thanks and greetings
Rahul TERTULIEN
Mobile applications developer
import java.io.IOException;
import java.io.OutputStream;Import javax.microedition.io.Connector;
Import javax.microedition.io.SocketConnection;
Import javax.microedition.media.MediaException;
Import javax.microedition.media.Player;
Import javax.microedition.media.PlayerListener;
Import javax.microedition.media.control.GUIControl;
Import javax.microedition.media.control.RecordControl;
Import javax.microedition.media.control.VideoControl;Import net.rim.device.api.system.Backlight;
Import net.rim.device.api.system.Bitmap;
Import net.rim.device.api.system.Display;
Import net.rim.device.api.ui.Field;
Import net.rim.device.api.ui.MenuItem;
Import net.rim.device.api.ui.UiApplication;
Import net.rim.device.api.ui.component.BitmapField;
Import net.rim.device.api.ui.component.ButtonField;
Import net.rim.device.api.ui.component.EditField;
Import net.rim.device.api.ui.container.HorizontalFieldManager;
Import net.rim.device.api.ui.container.MainScreen;
Import net.rim.device.api.ui.container.VerticalFieldManager;/*
* Class for recording the video
* Date: 05/10/2010
*
*/SerializableAttribute public class RecordingUi extends form {}
saving Boolean private volatile;
Private player _player;
Private RecordControl _recordControl;
private VideoControl videoControl.
private OutputStream outputStream = null;
SocketConnection Private SqlConnection connection = null;
Private boolean started = false;
videoField private sector;
Private boolean backLite = true;
int i;public RecordingUi() {}
Super (NO_VERTICAL_SCROLL);
this.getMainManager () .setBackground (BackgroundFactory.createSolidBackground (Color.BLACK));
setTitle ("video");
i = 0;
ToolBarMenuButton.AddMenuItem (new StartRecording());
ToolBarMenuButton.AddMenuItem (new StopRecording());
addMenuItem (menuItem);
{if(backLite==true)}
new BackliteThread (m:System.NET.HttpListener.start ());
}
}
private class BackliteThread extends Thread {}
int i = Backlight.getTimeoutDefault ();
int j = 1;
public void run() {}
do
{
If ((Display.getProperties)
(& Display.DISPLAY_PROPERTY_REQUIRES_BACKLIGHT). = 0)
{
Backlight.Enable (true, I);
}
try {}
Sleep (i);
} catch (InterruptedException e) {}
e.printStackTrace ();
}
I have = Backlight.getTimeoutDefault ();
} While (backLite == true);
}
}
private class StartRecording extends MenuItem {}
public StartRecording() {}
Super ("Start recording", 0, 100);
}public void run() {}
Try
{
VideoRecorderThread newRecorderThread = new VideoRecorderThread();
newRecorderThread.start ();
} catch (Exception e) {}
ErrorLog.addMsg (try ());
}
}
}
Class menu item to stop recording
private class StopRecording extends MenuItem {}
public StopRecording() {}
Super ("Stop recording", 0, 100);
}public void run() {}
try {}
If (record! = false)
{
new StopThread (m:System.NET.HttpListener.start ());
}
} catch (Exception e) {}
ErrorLog.addMsg (try ());
}
}
} //End of the Stop Menu item
Class for initialization of player and video recording and setting the Socket connectionprivate class videorecorderthread extends Thread implements {PlayerListener}
public void run() {}
try {}
Connection = (SocketConnection) Connector.open ("socket://192.168.1.86:1234;deviceside=true",Connector.WRITE,false);)
outputStream = connection.openOutputStream ();
_player = javax.microedition.media.Manager.createPlayer ("capture://video?encoding=video/3gpp&mode=standard");
_player. Realize();
_player.addPlayerListener (this);
videoControl = _player.getControl ("VideoControl") (alarm);
{if(videoControl!=null)}
videoField = videoControl.initDisplayMode (Field) (GUIControl.USE_GUI_PRIMITIVE, "net.rim.device.api.ui.Field");
}
UiApplication.getUiApplication () .invokeLater (new Runnable() {}public void run() {}
try {}
_player.prefetch ();
_player. Start();
ErrorLog.addMsg ("player State =" + _player.getState ());
Add (videoField);
_recordControl = (RecordControl) _player.getControl ("RecordControl");
_recordControl.setRecordStream (OutputStream);
_recordControl.startRecord ();
{if(Started==false)}
started = true;
Add (new RecordControlScreen());
}
} catch (Exception e) {}
ErrorLog.addMsg (try ());
}
}});
record = true;
} catch (IOException e) {}
ErrorLog.addMsg (try ());
}
{} catch (e MediaException)
ErrorLog.addMsg (try ());
}
}' Public Sub playerUpdate (a player, event in the chain,
EventData Object) {}
ErrorLog.addMsg ("Eventdata code" + eventData);
ErrorLog.addMsg ("the event deliverred" + event);
}
} //End of wire recorder
/*
Stop thread to stop recording and frees the resources
* Date: 05/10/2010
*
*/
private class StopThread extends Thread {}
public StopThread() {}
If (_recordControl! = null) {}
_recordControl.stopRecord ();
ErrorLog.addMsg ("inside the wire of the judgment");
try {}
_recordControl.commit ();
_player. Close();
outputStream.close ();
deleteAll();
Connection.Close;
record = false;
started = false;
backLite = false;
} catch (Exception e) {}
ErrorLog.addMsg (try ());
}
}
}
} //End of off wire
/*
* Class of UI elements and display chat messages
* Date: 05/10/2010
*
*/class RecordControlScreen extends VerticalFieldManager {}
See Boolean;
Byte [] data;
HFM HorizontalFieldManager;
VerticalFieldManager value for money;
EditField cat;
onPlay private bitmap;
offPlay private bitmap;
onStop private bitmap;
offStop private bitmap;
Private BitmapField play;
Private BitmapField stop;
public RecordControlScreen() {}
ErrorLog.addMsg ("inside RecordControlscreen");
onPlay = Bitmap.getBitmapResource ("onPlay.png");
onStop = Bitmap.getBitmapResource ("onStop.png");
offPlay = Bitmap.getBitmapResource ("offPlay.png");
offStop = Bitmap.getBitmapResource ("offStop.png");
display = false;
data = new byte [1024];
HFM = new HorizontalFieldManager();
VFM = new VerticalFieldManager();
Cat = new EditField();
play = new BitmapField (onPlay, BitmapField.FOCUSABLE |) ButtonField.CONSUME_CLICK) {}
protected boolean navigationClick (int status, int time) {}
ErrorLog.addMsg ("inside the click of button");
play.setBitmap (onPlay);
Invalidate();
try {}
UiApplication.getUiApplication () .invokeLater (new Runnable() {}
public void run() {}
try {}
ErrorLog.addMsg ("inside the run method of the click on the button");
RecordingUi.VideoRecorderThread recorderThread = new VideoRecorderThread();
recorderThread.start ();
} catch (Exception e) {}ErrorLog.addMsg (try ());
}
}
});
} catch (Exception e) {}
ErrorLog.addMsg (try ());
}
super.navigationClick (status, time);
Returns true;
}
protected void onFocus (int direction) {}
this.setBitmap (onPlay);
Invalidate();
}
protected void onUnfocus() {}
this.setBitmap (offPlay);
Invalidate();
}
};
stop = new BitmapField (onStop, BitmapField.FOCUSABLE |) ButtonField.CONSUME_CLICK) {}
protected boolean navigationClick (int status, int time) {}
stop.setBitmap (offStop);
UiApplication.getUiApplication () .invokeLater (new Runnable() {}
public void run() {}
ErrorLog.addMsg ("inside the run method of the click on the button");
RecordingUi.StopThread stopThread = new StopThread();
stopThread.start ();
}
});
Returns true;
}
protected void onFocus (int direction) {}
this.setBitmap (onStop);
Invalidate();
}
protected void onUnfocus() {}
this.setBitmap (offStop);
Invalidate();
}
};
HFM. Add (Play);
HFM. Add (Stop);
VFM. Add (CAT);
Add (VFM);
Add (HFM);
}
} //end of RecordControl Ui screen
public boolean onClose() {}
new StopThread (m:System.NET.HttpListener.start ());
If (_player! = null) {}
_player = null;
backLite = false;
_recordControl = null;
videoControl = null;
}
Return super.onClose ();
}
Menu item to find errors
MenuItem menuItem = new MenuItem("Errors",110,110) {}public void run() {}
UiApplication.getUiApplication () .pushScreen (new ErrorLog());
}
}; End of the Menu item
}It worked. There were a few problems with my Simulator
-
* Original title: Audio Service does not. I have audio but no volume control in the taskbar, also "" volume"in its notification list is gray out
Using Windows 7. My Audio service does not. I have audio but no volume control in the taskbar, also "" volume"in its notification list is grayed out.
Hello
1. when exactly you get the error message?
2. do you see a red brand 'X' indicating that the audio output does not work with error message?
Please follow the steps below and we update with the results.
Method 1:
a: you can try to enable the taskbar.
b. right-click on the taskbar (the bar at the bottom of your screen), select Properties.
c. click the Notification area.
d. then, under system icons, select the Volume that you want to display
Run Microsoft Fix it the following article and check.
http://support.Microsoft.com/default.aspx/KB/945011/en-us
Registry warning
To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/)
How to back up and restore the registry in Windows
Method 2: Ensure that the Windows audio service is running on the computer.
a. open administrative tools by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.
b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
c. right click on Windows Audio serviceand then click Properties.
d. under the general tab, next to startup type, make sure that Automatic is selected.
e. also make sure that the service is began to.
Method 3:
Tips for solving common audio problems
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problemsMethod 4:
Install the latest audio drivers on the computer by visiting the sound card manufacturer's Web site and check if it works.
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctlyNote: visit the manufacturer's Web site to download the latest audio drivers
For more information, see the article:
No sound in Windows
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows?T1=Tab03
Let us know if it helps!
-
Sound Recorder does not work XP
My recorder does not work. The only way it works is that if I plug a headset with a microphone. He worked at one time, but I ran HIJACK THIS and think that something has been removed. Help, please. Thank you!!
You have posted on a Windows 7 forum, but referred to as "XP" - Please use the link at the top of the page to return to the XP forum.
If you meant 'Windows 7' then use the audio troubleshooters in Control Panel, troubleshooting.
If this does not help, check the devices errors & drivers updated in Device Manager.
-
Audio service does not... I get a message saying... this computer cannot play audio because the Windows Audio Service is not enabled... even after that activation still does not work... its recognizingal my reading, sound and recording... says they're all works... but still no sound... got a new sound card, still nothing
Hello
Refer to the steps below to solve the problem.
Step 1:
I suggest to refer to the link below and follow the step by step guide to fix issues with the no sound in Windows Vista.
No sound in Windows
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
Step 2:
You can also check out the link below which provides an automatic fixit to solve the problem and also provides manual steps.
Tips for solving common audio problems
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
If the steps above do not help you can also refer to the link below and follow the suggestions given by Linda Yen in the TechNet Forums.
-
Premiere Pro CS3-"audio recording is not possible?
I'm reinstalling Adobe Premiere Pro CS3 on a new computer, but getting the message across "his currently installed adapter driver does not support entry DirectSound.» Audio recording is not possible. I took note of comments on the problems of his fellow men elsewhere but have not seen anything which seems to solve this problem. Is the problem with the change in windows Vista environments to Windows 7 (on Dell Alienware i7) or I have to buy another sound card, or is it Premiere Pro CS3 here the rub? Thank you, eirrom.
Yes, quite probably a compatibility issue. CS3 used an older model of compatibility, which long has been surpassed by newer versions of DX. However, still does backward compatible, so the problems you might have may depend on requiriung a specific driver, installing the legacy DirectX or as a minor, full support by changing some permissions on the system to allow the loading of drivers unsigned legacy and compatibility modes. It's a problem more complex that simply flipping a switch eitrher average. Check your device manager and then work your way through...
Mylenium
-
Remote control does not work, and the load does not appear on Apple TV
Hello
I just returned from vacation and my remote seems has stopped working. Naturally, my first assumption was that the charge was simply exhausted.
Apparently that was the case. He seems to have just died.
I did pay for more than two hours and it still does not appear under devices Apple TV.
My Apple TV 4 works very well because I use the remote control of my phone to navigate through it.
If I understand correctly what I look at you, it seems that the remote control is same not synchronized or recognized by Apple TV more.
Any suggestions on how to fix this?
A reset is complete? Restart... no change.
Thank you
Bob
- Have you tried pressing the menu and the button for a few seconds while it now an inch or two away from the Apple TV, if successful, you should see a message on the screen saying the remote was paired.
- If you have an older remote from a previous model MacBook or Apple TV, you can use to restore the Apple TV, which, in many cases, has been sufficient to reactivate the remote Siri. You must complete all upward to undertake a restoration.
- If you have a USB cable - C you can try to restore by connecting it to iTunes on a computer.
- If you have tried all of these steps, don't have a distance sooner or a USB - C cable or their use is too inconvenient, return it to the store where purchased for a replacement, or to couple for you.
-
HP Pavilion - 15-p264na: audio beats does not open after a clean install of windows 8.1
Hello
After a clean install of windows 8.1 the audio beats does not open.
It appears in the control, but when I click on it nothing happens.
I have sound, and everything seems to work ok, but I'm curious to know what happened.
When I go to Device Manager and select audio, video controllers and game, there are 2 features 1 is AMD high definition audio and the other just says high definition audio device.both drivers are up-to-date.
I look through the forums CIHI and I tried some of the links for the drivers of the itd, but they will not install.
Any help would be appreciated
Hello
Download and reinstall the Realtek HD Audio software at the following link.
http://ftp.HP.com/pub/SoftPaq/sp69001-69500/sp69164.exe
When the installation is complete, restart the laptop.
Kind regards
DP - K
-
Pavilion x 2-10-n109nl: Audio services does not
Hi all,
at one point in time and after any particular event, my laptop (Pavilion x 2-10-n109nl with Win10x64) started does not recognize the audio device. It displays a red x is close to the 'Volume' icon in the taskbar notification as if no audio device installed and lists an "unknown device" in Device Manager. Find that this unknown device has been "Intel ESS Audio Device (WDM)" and managed to install it with Intel drivers went back to 01/12/2016, so for the moment I had all audio devices is properly set up and works, but the Red Cross disappear and if I try to start Windows troubleshooting service it says "Audio services does not. This who can I try to do to get the problem resolved?
Thank you all,.
F.
Hey @Ledbetter92,.
Driver Audio Conexant is one that is registered in your page of drivers like Audio driver for you. This part is so good.
Thanks for being patient and following all the steps! I very much appreciate the cooperation while trying to find a solution you did great! I wanted to make sure that I told you.
You can try to do a reset of the BIOS. To reload the factory-installed BIOS configuration settings, perform the following steps:
In the BIOS Setup utility, select the tab out.
Select message Load Setup Defaults.
Select Save Changes and Exit (pressing F5 and the Enter key will also load default configuration).
Press ESC, then press Enter to exit the installation program.
Source: reload the default settings
Here is the document of HP Pavilion 10 - n100 x 2 detachable PCs-No Sound from computer speakers and Audio output connector that was created for this specific problem. You'll see below I have included the context of the document and the version numbers for each driver you need. Could you please check the versions currently installed on your laptop?
Here are the steps in the document:
No noise is through the computer speakers and the audio output connector headphone or external speakers are connected. An exclamation point (!) appears in the device on the audio device manager. This question is exposed on Windows 10.
To resolve this problem, follow the steps to download and install the following SoftPaqs to update BIOS and install device drivers:
Download and install the BIOS update.
Download and install Chipset Intel graphics, camera and Audio Driver Pack.
Download and install the Driver Audio Conexant.
Updated HP Notebook System BIOS (Intel processors)
- File name: SP73945
- Version: F.06
- Review: has
Chipset Intel Graphics, camera and Audio Driver Pack
- File name: SP72830
- Version: 604.10146.2652.361
- Review: has
Conexant Audio driver
- File name: SP72855
Version: 1.58.0.50
Review: has
I would like to know how it goes
Maybe you are looking for
-
The Web Acceleration Client error (513) - internal errorThe Web acceleration Client has detected an internal error that caused the connection between the customer to accelerate Web and server acceleration Web to be broken. A new attempt of the web pa
-
DVD ROM is not working on Satellite P300
IM under Vista Edition home premium and my DVD (TS-L633A) does not work on a Satellite P300 - 18M When I check in the Device Manager the dvd has a '!' next to her and an error message "Windows cannot start this hardware device because its information
-
acrobet does not open my acrobet projects
i CAN 'T OPEN ACROBET
-
Windows host process Rundll32 has stopped working ONLY at startup on the desktop.
When I start my Dell Inspiron 531 after that sign in the screen will Dim twice for a few seconds then the Windows host process Rundll32 has stopped working window appears. If you close another small window exactly the same error message mentioned abo
-
For about two days, my sound is really starting to * me off. = D now, the problem is that it seems to you that it works (its icon in the lower-right corner is white and with three soundwaves), however, there just not sound at all. When I try to test