Site display problem and google fonts correctly in Internet Explorer?

Similar Questions

• Model site Web created in PS displays do not correctly in Internet Explorer. Any ideas?

  Hello

  I was wondering if someone could help me with creating photoshop templates.

  I cut out my site, centered on the table, she produced in Dreamweaver and added a background and banners rotate but the site doesn't load correctly in Internet Explorer (before I even did). The cells are not properly aligned.

  I too tired, validate the code, but he says that it is not valid HTML.

  Does anyone else have this problem?

  My website can be found at: https://DL.dropbox.com/u/4966582/intranet/index.html

  Thanks in advance

  Photoshop is for images only.  Do not use the actual exported code on web sites.  It will not work in the wild.  Why?  Because the code is not good & the tables are too rigid to contain something other than the image slices.  When you try to change this provision in DW or any HTML editor, it collapses and produces unsightly gaps between the slices.

  The reason why it doesn't seem right in Internet Explorer is because the code is not a valid document on the first line type declaration.  This causes IE to display the page in Quirks Mode.

  Export HTML in Photoshop is really only for quick comps show a customer before starting to build the website with HTML and CSS code.

  Although that written for Fireworks, the tutorial into 3 parts below describes how to transfer your comp to a CSS layout design in DW.  If you're stuck on anything whatsoever, feel free to post questions in the forum of general discussion DW.

  Part 1 - initial design

  http://www.Adobe.com/devnet/Dreamweaver/articles/dw_fw_css_pt1.html

  Part 2 - markup preparation

  http://www.Adobe.com/devnet/Dreamweaver/articles/dw_fw_css_pt2.html

  Part 3: layout and CSS

  http://www.Adobe.com/devnet/Dreamweaver/articles/dw_fw_css_pt3.html

  Have fun!

  Nancy O.

• Some virtual machines have intermittent network connectivity problems and rest work correctly.

  Some virtual machines have intermittent network connectivity problems and rest work correctly. The VMs are in the same group of port and on a 4-node cluster. Physical network interface cards are appearing in vsphere client

  Please confirm if the issue has been resolved after you complete the steps.

• Site doesn't display correctly in Internet Explorer

  Hello all, please help. Just create a site alex.me.mw

  Please tell me why it does not appear correctly in Internet Explorer, but in all other browsers.

  Thank you

  Delete

  Change

  TO

  GRAMPS

• FavIcons not showing correctly in the file Explorer, but display correctly in Internet Explorer.

  Please note: this is the opposite of what people usually describe their problem in.

  I have Windows 7 Pro 64 bit.

  My favicon display correctly in the Explorer of files (file mode) but display correctly in Internet Explorer. This intrigues me. When I open the Internet Explorer, icons for Favorites OK show to the left of the name of the shortcut file in the Favorites bar and the Favorites bar. However, when I open Windows File Explorer and check out my favorites and folders, the FavIcons are the generic icons globe, not specific icons to websites that shortcuts point to. The links work well. It's just that the FavIcons are generic globes. (Not all, but many). I want the correct FavIcons to show in the view of Windows File Explorer.

  I tried to revisit web sites and dragging the URL (and favicon) of the bar of address of IE in the "Favorites" folder again. Who has not solved the problem. I tried to go to the page of the site and to type the favicon.ico extension and save it, but windows won't let me save it. (Where can they be saved? And how would be attributed to the shortcut in the file Explorer file? Or is it not the way to solve the problem?)

  Is there a way to fix this without having to download an app/program? Is there a way to solve this problem without changing the registry? Or is the simple registry change?

  I want the correct Favicons to display in the file Explorer, and Internet Explorer.

  Please answer in plain English, not in words irritable. If you propose a procedure, please explain where everything is (how to find things click on what you recommend.)

  Thanks in advance for the help.

  IT IS THE ANSWER. A MODERATOR WOULD MARK IT AS THE ANSWER, OR REPLY TO IT, SO I CAN MARK THE ANSWER. IT SEEMS ABSURD THAT WE ARE UNABLE TO POST AN ANSWER TO OUR QUESTION AND POWER OF THE BRAND AS THE ANSWER. Thank you.

  I searched and found the answer. Also, I realized I had encountered this problem about two years ago and had saved the info of the solution in a Notepad file. On the site, the answer given by Chris H is the solution. It is to delete the icon cache of .db database and allowing windows to create a new. My problem was that the favicons for several favorite shortcuts of IE showed the purple globe (ugly) credits. After that I deleted the icon cache database file, a new file has been created and my favicons are correct for each shortcut.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/some-desktop-icons-appear-as-broken-icons/05abcead-adb1-43ba-9BB7-e308d0cc83a4

  (Both methods are given in the he.) I list the instructions for the first method, which worked for me. You can click on this page for more information).

  There are a few things you can try:

  First: (icon Cache regeneration)

  1. open Folder Options to select (round) display the hidden files and folders.
  2. open a Windows Explorer window.
  3. go to C:\Users\(User Name) \AppData\Local
  4. right click on IconCache.db and click on delete.
  5. click on Yes to confirm the deletion.
  NOTE: This deletes the file to the trash. It is safe to empty the trash when you are done.
  6. close the window.
  7 empty the trash.
  8 restart the computer.
  9. When you return, you'll notice the size of the file IconCache.db is reduced, and the update is now the current date.
  NOTE: If for some reason any IconCache.db isn't there or the size has not changed much, then just restart the computer again. You may need to restart a few times in some cases.
  10. the icon cache has been rebuilt.
  11. Open Folder Options to select (round) do not show the hidden files and folders.

  Similar instructions can be found here:

  http://superuser.com/questions/62508/what-causes-icon-corruption-in-Windows-7

• Cannot change the font size in Internet Explorer

  Original title: Internet Explorer

  Has increased the font size in Internet Explorer and I don't know what I have done and I can't find out how to restore it.

  Can someone help me please?

  No I have not, but I didn't know where to post this.

  I also now have the problem sorted through a friend

• I have xp sp3, and every time I start internet explorer 8, it opens closes again on his own why? HELP PLZ?

  I have xp sp3, and every time I start internet explorer 8, it opens closes again on his own why? HELP PLZ?

  See if this article solves your problem:

  "Internet Explorer opens, flashes and closes immediately when you start"
   <>http://support.Microsoft.com/kb/967896 >

  HTH,
  JW

• I have a report from trusteer installed and it works fine on internet explore and it was running on firefox 3 but since download ff4 its missing

  I have installed trusteer report and it works well on internet explore and also ran it on firefox 3(latest_version).since install ff4 he disappeared.
  I'm running on windows vista
  Help!
  Issey

  Trusteer report have created a version for Firefox 4, to do so go to http://www.trusteer.com/support and type "Firefox 4" because the question of taking in charge.

• How can I prevent the shutdown task scheduler engine, get the new display detected to work and avoid receiving the message "Internet Explorer has encountered a problem and stop"? __

  My laptop is a Dell Inspiron 1520, running Windows Vista Home Edition Premium and Internet Explorer 9.  My extra monitor is a Sharp Aquos LED HD - TV, the model LC-46LE700UN.  I've been using a VGA cable to me onnecter the laptop and TV.

  The laptop seems to operate normally when not connect to the TV.

  As soon as the VGA cable is connected to the laptop (without being connected to the TV), the following message appears:

  'Microsoft Windows - Task Scheduler engine has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is found. »

  When initially, I connected the laptop to TV, "new display detected" was automatically acti EV.  Soon, it was activated is no longer automatically.  I was able to activate manually using Windows Mobility Center during automatic activation failed initially but now Windows Mobility Center no longer detects the new view.

  Using Fn + F8, I can view the image on the laptop or TV, but not both simultaneously.

  The message "Internet Explorer has encountered a problem and stop" appears intermittently, but I can still make internet sites and show the content after the message.

  I have download software, myp2p.eu, a site for watching TV programs "streaming", including PPStream, Sopcast, Live, Stream Torrent Sina, a Swarm, TVAnts, UUSee, VGO and Veetle player and canceled downloads for PPL (who failed an integrity check), PPMate (corrupted) and (blocked) TVKoo.

  Norton Security quarantined the installer of UUSee, indicating that it was a high risk of program with many users.

  To a computer repair shop and using a different additional display flat screen, I could not duplicate the problems yesterday (4 October 2010), when the "new detected display" has been activated automatically, and I could see the photo or the other and both screens.

  I tried to restore the system to a date (on the list) before when the problems occurred first - failure of the restoration of the system.  I tried to use scandisk, but received no indication that he had performed and corrected all errors found after restarting Windows.  I looked at responses from forum, the display setting and the new display detected support literature.

  How can I avoid these problems?  Help!

  Hello

  Restoring the system end up with any error message?

  This could also happen if one of the substantive programmes is in conflict with the proper functioning of your computer. To troubleshoot error messages and other issues,
  You can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Steps-
  1 log on to the computer using an account with administrator rights
  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue
  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)
  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all

  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services.
  If you disable these services, you can permanently delete all restore points. Do not do this if you want to use with existing restore points system restore utility

  See this article-
  http://support.Microsoft.com/kb/929135

  This should solve your problem.

  -Robert

• All Web sites display problem

  Hello
  I bought the Asus G73JH-TZ008V full HD 17. I have a big problem to display all web sites: all web sites display in format reduced from-30% around.
  I have the same problem with Google Chrome, but not with Internet Explorer! ???

  What could I do?
  ASUS support says it's a bug of Mozzila!

  Thank you

  I have Mozilla 3.6.3

  This has happened

  Each time Firefox opened

  Is always

  See this:
  https://support.Mozilla.com/en-us/KB/page+zoom

  Or use the Default FullZoom Level extension:
  https://addons.Mozilla.org/en-us/Firefox/addon/6965

• Error "the network card experiences driver or hardware problems" and "To ensure that your Internet protocol bindings are Correct" on Dell Inspiron 530

  Original title: 'make sure that your Internet protocol bindings are Correct (DELL Inspiron 530 Intel 82562V and Desltop)
  
  I'm doing tech support for the family and I'm stumped. They had a Dell 530 with an Intel 82562V-2 and is no longer connected to the internet.

  ipconfig/all statements

  Hostname...: wayne-PC
  Suffix main DNS...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  That's all. Windows gives errors two errors:

  (1) the card network knows of driver or hardware problems

  (2) check that your Internet Protocol connections are Correct

  I installed the latest Intel drivers and TCP IP settings are checked for V4 and V6. I even went as far to install a new Dynex Ethernet card that gets the same mistakes.

  I even tried the netsh reset ip and netsh winsock reset command. I have no idea what to do next. I searched glasses and found similar problems with the same model of Dell and card, but they have been fixed by rebooting.

  Hi MButIer,

  -How long have you had this problem?
  -Was any change in software because the computer before the show?

  Follow the steps mentioned below:

  Step 1:

  Temporarily disable the antivirus software (and any other security software) and the firewall on the computer as a test. Once disabled check if you can connect to the internet without any error.

  If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program. Please contact the software vendor for assistance in this regard.

  Note: Make sure that you enable the antivirus software, other security and firewall programs.

  Warning

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2:

   

  Perform a System Restore to a point before the show and check if this solves the problem.

  See also:

  System Restore: frequently asked questions

  If the steps above do not help, the best would be to get in touch with the Internet Service Provider (ISP) for assistance.

  Hope this information helps.

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• I have problem getting m when you run Internet Explorer, Google Chrome and Firefox are... "Internet Explorer has stopped working", "Google chrome stopped working.

  Please someone help me with this problem, I m waiting for a solution

  The details are mention below...

  Google Chrome
  Signature of the problem:
  Problem event name: BEX
  Application name: chrome.exe
  Application version: 22.0.1229.79
  Application timestamp: 50616671
  Fault Module name: unknown
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception offset: 648f0d73
  Exception code: c0000005
  Exception data: 00000008
  OS version: 6.1.7600.2.0.0.768.3
  Locale ID: 16393

  Internet Explorer

  Signature of the problem:
  Problem event name: BEX
  Application name: iexplore.exe
  Application version: 9.0.8112.16450
  Application timestamp: 503723f6
  Fault Module name: StackHash_d893
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception offset: 28890d 73
  Exception code: c0000005
  Exception data: 00000008
  OS version: 6.1.7600.2.0.0.768.3
  Locale ID: 16393
  Additional information 1: d893
  More information 2: d893a36d76397fffb4086425a4f50b4c
  3 more information: c19f
  Additional information 4: c19f8f2799f6319e5b5618be5bfccaea

  Thank you...

  Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  -

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  -

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  -

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  -

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  -

  Finally if all else fails, you can look at the rather cryptic system event log. To do that click on start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  `

  When you get your system in good working condition, I invite you to back up your system up to an external hard drive and make it regular periodic updates.

  -

  I hope this helps. Good luck.

• Illustrator CS6 display problems and Yosemite

  I recently bought a macbook pro with Yosemite and problems with Illustrator CS6.

  There are so many bugs that I can't set as follows:

  • Dialog boxes appear off the screen
  • Cannot scrolling completely on the dialogs for the column
  • Cut and paste Illustrator artwork in Photoshop causes random pixelated appearance.
  • Text in my work and in some of the menus and icons in the tool bar appear to be lo-res.
  I tried various installation options, looked at the display screen and preferences options, but I have no idea what is happening.

  Honey,

  First of all, remove column view until Apple fixed.

  The right path/order is to upgrade the operating system, and then reinstall the applications. If this isn't the case, already, in my view, that it should be, at least for Illy.

  You could reinstall using the way complete three steps to ensure that (if not, strange things may persist):

  (1) uninstall (check the box to delete the preferences),

  (2) run the cleanup tool, see the link below,

  (3) reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html

  It is also important to drivers (Wacom imcluding) have updated.

• Please help - site display problems...

  Hello - I built a quick shell for a site in Dreamweaver. Here is the link of time online so you can see what I'm going to ask about:
  
  http://www.shootingblanks.NET/sausagefest/index.html
  
  Three "segments" of the site (left, right and Centre) should be all together - not with the light blue background between the two gap. The gap is only between the Middle segments and right on IE, and it is between the three segments on Firefox for some reason any...
  
  Here is a link to download all the files of the site (total only 230kb) so you can see 'behind the scenes', what I did and maybe help me to solve the problem:
  
  http://www.shootingblanks.NET/sausagefest/sausage.zip
  
  I use DW8. Thanks much for any help you can offer!
  
  -Matt
  

  OK - I did what you said, and he always looks the same. I've updated the two links in my original post (the URL and the.) ZIP file). Any other ideas?

  EDIT: In fact, I need to change the 17% to 20% (near the bottom - for the right table/block). I don't know why it worked, but it did! Thank you!!!

• Cannot "turn on media streaming" - another user of Windows 7 with the same problem and the "suggested correction '' does not.

  This windows bug has been reported and 'responded' before by several people, but the "answers" do not work for me - and they do seem to work for a lot of people in this area and other forums.  I hope you can provide me with a real estate diagnosis, a reason for why this happens and a real solution that works for everyone.

  I'm trying to 'Turn on media streaming' in Windows Media Player so I can listen to my xbox and other home theater equipment.  The problem I have is the same problem as [of] other people have reported: in Windows Media Player, I press the turn on the 'link', the button greys streamin media shortly, but then nothing, and streaming is not enabled.

  I don't have a network problem.  I was able to extend Microsoft Media Center on my xbox.  (simply not enable streaming in WMP).  With media center extended is a large (better) workaround for the xbox, but this isn't a solution for my other home theater devices. I need to be able to listen to my receiver and blu - ray player, as I have done on my old PC running Windows XP.

  I have a fresh install of Windows 7 Pro, x-64 on a new machine of self-building.  Everything else works, it is not the machine.  I installed all the latest drivers for my machine.  I have all the updates for Windows 7.  I run the Windows Firewall and Kaspersky Anti Virus 2010.  I installed Microsoft Office 2007, Outlook 2007, Visio 2010 and many other applications 'standard '.  I'm not under any program of low-level "weird."

  As other people "suggested", already tried the action of the outgoing WMP, stop the Windows Media Player Network Sharing Service using service.msc, then by removing the .wmdb (and other files but not directories) by my dirctory users/xxx/AppData/Local/Microsoft/Media Player, restart the Service of network share WMP using services.msc and then restarting WMP.  This had no effect.  (I tried several times with and without having to restart WMP network sharing service manually.)  I tried to change the Windows Media Player Network Sharing Service, tab log (the default on my system) Network Service to Local System with "allow service to interact with desktop" chosen as someone another "suggested".  This does not seem to do anything.  I also tried to uninstall WMP and WMC player (using "turn Windows has or disable"), restart, then adding them and reboot.  This time this icon "turn media sharing on" returned in WMP (the icon is usually party WMP Stream/turn on media sharing window).  This time Windows 7 Pro thought a little longer before doing nothing.  (However, now I get a message error "an error has occurred. Not all features have been changed successfully. "in an attempt to"Reinstall"Windows Media Center after you have reinstalled WMP.)  The resettlement of WMC has returned an error.  I can no longer start Windows Media Center on my PC.

  So, by all posts on this topic, its obvious this is a real bug in Windows 7 (maybe?), (perhaps only on x - 64?).

  Just two more things on my setup... I did not initially set up homegroup (because I have no other Windows 7 machines), but I tried that implemented to see if it had an effect (it didn't).  The part only 'weird' of my installation, I mounted my D: drive (2nd hard drive) in C:\Users (because I use a Solid State Drive for the operating system on C: and don't want the user data on this subject).  This has not caused other problems, but I wanted to throw it out there in case Windows Media Player sharing is something weird here.  (And no, I'm not going to 'try to change' that, unless it is a known fact that that's the problem - and then I would need a different solution to move my user data off the coast of the SSD.)

  So please, let me know what is the real problem why it happened to me (I'm sure some people can turn on streaming in WMP), and what is the real solution.  (There seems to be a multitude of suggestions on the web for all kinds of different 'fixed', but which, if any, is the right one?)  Please do not just suggest things to try.  What is the right benchmark?

  Go to network and sharing center open view full map, right click on your PC and click on manage.

  then open services and applications, and then serivces and find Upnp device host, right click and click on reboot and make sure that it is set to automatic.

  Now scroll down to Windows Media Player Network Sharing service, do a right click and click on reboot and make sure that it is set to automatic also.

  It should work, it worked for me and everyone I know but... The only problem I have is when I restart my PC, the drive share Windows Media network service changes from automatic to automatic (delayed start) and I have to restart again the Upnp device host and Windows Media Player network sharing service.

  Other than having to do every time I restart my PC, it works perfectly.

  Also, if anyone has an idea of why it changes (delayed start) let me know thanks...