Site to Site between ASA VPN connection and router 2800

Similar Questions

• iPhone - ASA VPN connects and gets disassembly

  Hello world...

  I have a VPN working properly on a 8.0 (5) ASA, but when I try to connect from an iPhone (IOS 5.1.1) it connects and immediately Gets a teardown.

  Any thoughts?

  Thank you!

  can you pls share your config ASA and advise what group policy, you use for iphone users?

• Impossible to establish vpn site to site between asa 5505 5510 year

  Hi all experts

  We are now plan to form an IPSec VPN tunnel from site to site between ASA 5505 (ASA Version 8.4) and ASA 5510 (ASA Version 8.0) but failed, would you please show me how to establish? A reference guide?

  Hugo

  Here are the links to the guides-cisco config:

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/site2sit.html

  http://www.Cisco.com/en/us/docs/security/ASA/asa84/configuration/guide/vpn_site2site.html

  In addition to VPN, you need to consider in NAT exemption:

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/cfgnat.html#wp1043541

  http://www.Cisco.com/en/us/docs/security/ASA/asa84/configuration/guide/nat_overview.html#wpxref25608

  http://www.Cisco.com/en/us/docs/security/ASA/asa84/configuration/guide/nat_rules.html#wp1232160

  And many examples:

  http://www.Cisco.com/en/us/products/ps6120/prod_configuration_examples_list.html

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• I have created a VPN connection and it worked but you can't see how to remove Windows 7.

  Delete the VPN connection

  I have created a VPN connection and it worked but you can't see how to remove Windows 7.  I tried rt-click but no delete option.

  Open network and sharing Center. On the left side, click on change adapter settings. You will get all VPN connections that have been created and you can delete what you don't need.

• VPN site-to-site between ASA 5505 and 2911

  Hi all

  I'm trying to setup VPN S2S. A.a.a.a of ip for the router 2911 office, remote office ASA 5505 8.4 (3) with ip b.b.b.b, but no luck.

  2911 config:

  !

  version 15.2

  horodateurs service debug datetime msec

  Log service timestamps datetime msec

  encryption password service

  !

  host name 2911

  !

  boot-start-marker

  Boot system flash c2900-universalk9-mz. Spa. 152 - 2.T.bin

  boot-end-marker

  !

  !

  Min-length 10 Security passwords

  logging buffered 51200 warnings

  !

  No aaa new-model

  !

  !

  min-threshold queue spd IPv6 62

  Max-threshold queue spd IPv6 63

  No ipv6 cef

  the 5 IP auth-proxy max-login-attempts

  max-login-attempts of the IP 5 admission

  !

  !

  !

  DHCP excluded-address IP 192.168.10.1 192.168.10.99

  DHCP excluded-address IP 192.168.22.1 192.168.22.99

  DHCP excluded-address IP 192.168.33.1 192.168.33.99

  DHCP excluded-address IP 192.168.44.1 192.168.44.99

  DHCP excluded-address IP 192.168.55.1 192.168.55.99

  192.168.10.240 IP dhcp excluded-address 192.168.10.254

  DHCP excluded-address IP 192.168.22.240 192.168.22.254

  DHCP excluded-address IP 192.168.33.240 192.168.33.254

  DHCP excluded-address IP 192.168.44.240 192.168.44.254

  DHCP excluded-address IP 192.168.55.240 192.168.55.254

  !

  desktop IP dhcp pool

  import all

  network 192.168.33.0 255.255.255.0

  router by default - 192.168.33.254

  192.168.10.10 DNS server 202.50.246.41 202.50.246.42

  local domain name

  -192.168.10.10 NetBIOS name server

  h-node NetBIOS node type

  !

  wi - fi IP dhcp pool

  import all

  network 192.168.44.0 255.255.255.0

  192.168.10.10 DNS server 202.50.246.41 202.50.246.42

  local domain name

  router by default - 192.168.44.254

  -192.168.10.10 NetBIOS name server

  h-node NetBIOS node type

  !

  DMZ IP dhcp pool

  import all

  network 192.168.55.0 255.255.255.0

  192.168.10.10 DNS server 202.50.246.41 202.50.246.42

  local domain name

  router by default - 192.168.55.254

  -192.168.10.10 NetBIOS name server

  h-node NetBIOS node type

  !

  IP dhcp pool voip

  import all

  network 192.168.22.0 255.255.255.0

  192.168.10.10 DNS server 202.50.246.41 202.50.246.42

  local domain name

  router by default - 192.168.22.254

  -192.168.10.10 NetBIOS name server

  h-node NetBIOS node type

  !

  IP dhcp pool servers

  import all

  network 192.168.10.0 255.255.255.0

  default router 192.168.10.254

  192.168.10.10 DNS server 202.50.246.41 202.50.246.42

  local domain name

  -192.168.10.10 NetBIOS name server

  h-node NetBIOS node type

  !

  !

  IP domain name of domain

  name-server IP 192.168.10.10

  IP cef

  connection-for block 180 tent 3-180

  Timeout 10

  VLAN ifdescr detail

  !

  Authenticated MultiLink bundle-name Panel

  !

  !

  Crypto pki token removal timeout default 0

  !

  Crypto pki trustpoint TP-self-signed-3956567439

  enrollment selfsigned

  name of the object cn = IOS - Self - signed - certificate - 3956567439

  revocation checking no

  rsakeypair TP-self-signed-3956567439

  !

  !

  TP-self-signed-3956567439 crypto pki certificate chain

  certificate self-signed 01 nvram:IOS - Self-Sig #1.cer

  license udi pid sn CISCO2911/K9

  !

  !

  the FULL_NET object-group network

  full range of the network Description

  192.168.10.0 255.255.255.0

  192.168.11.0 255.255.255.0

  192.168.22.0 255.255.255.0

  192.168.33.0 255.255.255.0

  192.168.44.0 255.255.255.0

  !

  object-group network limited

  description without servers and router network

  192.168.22.0 255.255.255.0

  192.168.33.0 255.255.255.0

  192.168.44.0 255.255.255.0

  !

  VTP version 2

  password username admin privilege 0 password 7

  !

  redundancy

  !

  !

  !

  !

  !

  no passive ftp ip

  !

  !

  crypto ISAKMP policy 10

  BA aes 256

  sha512 hash

  preshared authentication

  ISAKMP crypto key admin address b.b.b.b

  invalid-spi-recovery crypto ISAKMP

  !

  !

  Crypto ipsec transform-set esp - aes esp-sha-hmac SET

  !

  !

  !

  10 map ipsec-isakmp crypto map

  the value of b.b.b.b peer

  Set transform-set

  match address 160

  !

  !

  !

  !

  !

  Interface Port - Channel 1

  no ip address

  waiting-150 to

  !

  Interface Port - channel1.1

  encapsulation dot1Q 1 native

  IP 192.168.11.254 255.255.255.0

  IP nat inside

  IP virtual-reassembly in

  !

  Interface Port - channel1.10

  encapsulation dot1Q 10

  IP address 192.168.10.254 255.255.255.0

  IP nat inside

  IP virtual-reassembly in

  !

  Interface Port - channel1.22

  encapsulation dot1Q 22

  IP 192.168.22.254 255.255.255.0

  IP nat inside

  IP virtual-reassembly in

  !

  Interface Port - channel1.33

  encapsulation dot1Q 33

  IP 192.168.33.254 255.255.255.0

  IP nat inside

  IP virtual-reassembly in

  !

  Interface Port - channel1.44

  encapsulation dot1Q 44

  IP 192.168.44.254 255.255.255.0

  IP nat inside

  IP virtual-reassembly in

  !

  Interface Port - channel1.55

  encapsulation dot1Q 55

  IP 192.168.55.254 255.255.255.0

  IP nat inside

  IP virtual-reassembly in

  !

  the Embedded-Service-Engine0/0 interface

  no ip address

  Shutdown

  !

  interface GigabitEthernet0/0

  Description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-GE $ 0/0

  no ip address

  Shutdown

  automatic duplex

  automatic speed

  !

  interface GigabitEthernet0/1

  no ip address

  automatic duplex

  automatic speed

  channel-group 1

  !

  interface GigabitEthernet0/2

  Description $ES_LAN$

  no ip address

  automatic duplex

  automatic speed

  channel-group 1

  !

  interface GigabitEthernet0/0/0

  IP address a.a.a.a 255.255.255.224

  NAT outside IP

  IP virtual-reassembly in

  automatic duplex

  automatic speed

  crypto map

  !

  IP forward-Protocol ND

  !

  no ip address of the http server

  23 class IP http access

  local IP http authentication

  IP http secure server

  IP http timeout policy slowed down 60 life 86400 request 10000

  !

  overload of IP nat inside source list NAT_INTERNET interface GigabitEthernet0/0/0

  IP nat inside source udp 500 interface GigabitEthernet0/0/0 500 a.a.a.a static

  IP route 0.0.0.0 0.0.0.0 xxx.xxx.xxx.xxx

  !

  NAT_INTERNET extended IP access list

  refuse the object-group ip FULL_NET 192.168.17.0 0.0.0.255

  refuse the object-group ip FULL_NET 192.168.1.0 0.0.0.255

  permit ip FULL_NET object-group everything

  !

  access-list 1 permit 192.168.44.100

  access-list 23 allow 192.168.10.7

  access-list 23 permit 192.168.44.0 0.0.0.255

  access-list 100 permit ip 192.168.10.0 0.0.0.255 192.168.17.0 0.0.0.255

  access-list 160 permit ip 192.168.10.0 0.0.0.255 192.168.17.0 0.0.0.255

  !

  !

  !

  control plan

  !

  !

  !

  Line con 0

  password password 7

  opening of session

  line to 0

  line 2

  no activation-character

  No exec

  preferred no transport

  transport of entry all

  transport output pad rlogin lapb - your MOP v120 udptn ssh telnet

  StopBits 1

  line vty 0 4

  access-class 23 in

  privilege level 15

  local connection

  entry ssh transport

  line vty 5 15

  access-class 23 in

  privilege level 15

  local connection

  entry ssh transport

  !

  Scheduler allocate 20000 1000

  !

  end

  The ASA config:

  : Saved : ASA Version 8.4(3) ! hostname C domain-name domain enable password password encrypted passwd passwd encrypted names ! interface Ethernet0/0 ! interface Ethernet0/1 shutdown ! interface Ethernet0/2 shutdown ! interface Ethernet0/3 shutdown ! interface Ethernet0/4 shutdown ! interface Ethernet0/5 switchport access vlan 100 ! interface Ethernet0/6 switchport trunk allowed vlan 2,6 switchport mode trunk ! interface Ethernet0/7 shutdown ! interface Vlan1 description INTERNET mac-address 1234.5678.0001 nameif WAN security-level 0 ip address b.b.b.b 255.255.255.248 standby c.c.c.c ospf cost 10 ! interface Vlan2 description OLD-PRIVATE mac-address 1234.5678.0102 nameif OLD-Private security-level 100 ip address 192.168.17.2 255.255.255.0 standby 192.168.17.3 ospf cost 10 ! interface Vlan6 description MANAGEMENT mac-address 1234.5678.0106 nameif Management security-level 100 ip address 192.168.1.2 255.255.255.0 standby 192.168.1.3 ospf cost 10 ! interface Vlan100 description LAN Failover Interface ! boot system disk0:/asa843-k8.bin ftp mode passive clock timezone NZST 12 clock summer-time NZDT recurring 1 Sun Oct 2:00 3 Sun Mar 2:00 dns domain-lookup WAN dns server-group DefaultDNS name-server 208.67.222.222 domain-name domain same-security-traffic permit intra-interface object network obj-192.168.17.0 subnet 192.168.17.0 255.255.255.0 object network obj-192.168.10.0 subnet 192.168.10.0 255.255.255.0 object network obj-192.168.2.0 subnet 192.168.2.0 255.255.255.0 object network obj-192.168.9.0 subnet 192.168.9.0 255.255.255.0 object network obj-192.168.33.0 subnet 192.168.33.0 255.255.255.0 object network obj-192.168.44.0 subnet 192.168.44.0 255.255.255.0 object network obj_any object network obj_any-01 object network NETWORK_OBJ_192.168.10.0_24 subnet 192.168.10.0 255.255.255.0 object network NETWORK_OBJ_192.168.17.0_24 subnet 192.168.17.0 255.255.255.0 object network subnet-00 subnet 0.0.0.0 0.0.0.0 object-group protocol TCPUDP protocol-object udp protocol-object tcp object-group service RDP tcp description RDP port-object eq 3389 object-group network DM_INLINE_NETWORK_1 network-object 192.168.17.0 255.255.255.0 network-object 192.168.10.0 255.255.255.0 network-object 192.168.33.0 255.255.255.0 network-object 192.168.44.0 255.255.255.0 object-group network DM_INLINE_NETWORK_2 network-object 192.168.10.0 255.255.255.0 network-object 192.168.33.0 255.255.255.0 network-object 192.168.44.0 255.255.255.0 object-group network subnet-17 network-object 192.168.17.0 255.255.255.0 object-group network subnet-2 network-object 192.168.2.0 255.255.255.0 object-group network subnet-9 network-object 192.168.9.0 255.255.255.0 object-group network subnet-10 network-object 192.168.10.0 255.255.255.0 access-list LAN_nat0_outbound extended permit ip 192.168.17.0 255.255.255.0 192.168.10.0 255.255.255.0 access-list LAN_nat0_outbound extended permit ip 192.168.17.0 255.255.255.0 192.168.9.0 255.255.255.0 access-list LAN_IP standard permit 192.168.17.0 255.255.255.0 access-list WAN_access_in extended permit ip any any log debugging access-list WAN_access_in extended permit tcp any object-group RDP any object-group RDP log debugging access-list WAN_access_in extended permit icmp x.x.x.x 255.255.255.248 192.168.10.0 255.255.255.0 access-list MANAGEMENT_access_in extended permit ip any any log debugging access-list OLD-PRIVATE_access_in extended permit ip any any log debugging access-list OLD-PRIVATE_access_in extended permit icmp any object-group DM_INLINE_NETWORK_1 access-list 101 extended permit tcp host 192.168.10.7 any eq 3389 log debugging access-list WAN_1_cryptomap extended permit ip 192.168.1.0 255.255.255.0 192.168.10.0 255.255.255.0 access-list WAN_1_cryptomap extended permit ip 192.168.17.0 255.255.255.0 192.168.9.0 255.255.255.0 access-list WAN_cryptomap_2 extended permit ip 192.168.1.0 255.255.255.0 192.168.10.0 255.255.255.0 access-list CiscoVPNClient_splitTunnelAcl standard permit 192.168.17.0 255.255.255.0 access-list LAN_access_in extended permit ip any any log debugging access-list WAN_nat0_outbound extended permit ip 192.168.17.0 255.255.255.0 192.168.10.0 255.255.255.0 access-list WAN_nat0_outbound extended permit ip 192.168.17.0 255.255.255.0 192.168.2.0 255.255.255.0 access-list WAN_nat0_outbound extended permit ip 192.168.17.0 255.255.255.0 192.168.9.0 255.255.255.0 access-list WAN_2_cryptomap extended permit ip 192.168.17.0 255.255.255.0 192.168.10.0 255.255.255.0 access-list WAN_2_cryptomap extended permit ip 192.168.17.0 255.255.255.0 192.168.9.0 255.255.255.0 access-list LAN_IP_inbound standard permit 192.168.10.0 255.255.255.0 access-list inside_nat0_outbound extended permit ip 192.168.10.0 255.255.255.0 192.168.17.0 255.255.255.0 access-list vpnusers_splitTunnelAcl extended permit ip 192.168.17.0 255.255.255.0 any access-list nonat-in extended permit ip 192.168.17.0 255.255.255.0 192.168.2.0 255.255.255.0 pager lines 24 logging enable logging buffer-size 52000 logging monitor informational logging trap informational logging asdm informational logging from-address syslog logging recipient-address admin level errors logging host OLD-Private 192.168.17.110 format emblem logging debug-trace logging permit-hostdown mtu WAN 1500 mtu OLD-Private 1500 mtu Management 1500 ip local pool VPN_Admin_IP 192.168.1.150-192.168.1.199 mask 255.255.255.0 ip local pool vpnclient 192.168.2.1-192.168.2.5 mask 255.255.255.0 failover failover lan unit primary failover lan interface failover Vlan100 failover polltime interface 15 holdtime 75 failover key ***** failover interface ip failover 192.168.100.1 255.255.255.0 standby 192.168.100.2 icmp unreachable rate-limit 1 burst-size 1 icmp permit 192.168.10.0 255.255.255.0 WAN icmp permit host x.x.x.x WAN icmp permit 192.168.17.0 255.255.255.0 WAN icmp permit host c.c.c.c WAN icmp permit host a.a.a.a WAN icmp deny any WAN icmp permit 192.168.10.0 255.255.255.0 OLD-Private icmp permit 192.168.17.0 255.255.255.0 OLD-Private icmp permit host a.a.a.a OLD-Private icmp permit host 192.168.10.0 Management icmp permit host 192.168.17.138 Management icmp permit 192.168.1.0 255.255.255.0 Management icmp permit host 192.168.1.26 Management icmp permit host a.a.a.a Management asdm image disk0:/asdm-647.bin no asdm history enable arp timeout 14400 nat (OLD-Private,any) source static subnet-17 subnet-17 destination static subnet-10 subnet-10 no-proxy-arp nat (OLD-Private,any) source static subnet-17 subnet-17 destination static subnet-2 subnet-2 no-proxy-arp nat (OLD-Private,any) source static subnet-17 subnet-17 destination static subnet-9 subnet-9 no-proxy-arp nat (Management,WAN) source static NETWORK_OBJ_192.168.17.0_24 NETWORK_OBJ_192.168.17.0_24 destination static NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 no-proxy-arp route-lookup ! object network subnet-00 nat (OLD-Private,WAN) dynamic interface access-group WAN_access_in in interface WAN access-group OLD-PRIVATE_access_in in interface OLD-Private access-group MANAGEMENT_access_in in interface Management route WAN 0.0.0.0 0.0.0.0 x.x.x.x 1 timeout xlate 3:00:00 timeout pat-xlate 0:00:30 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy user-identity default-domain LOCAL aaa authentication ssh console LOCAL aaa local authentication attempts max-fail 10 http server enable http b.b.b.b 255.255.255.255 WAN http 0.0.0.0 0.0.0.0 WAN no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart service resetoutside crypto ipsec ikev1 transform-set OFFICE esp-aes esp-sha-hmac crypto map WAN_map 1 match address WAN_1_cryptomap crypto map WAN_map 1 set pfs crypto map WAN_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map Office 2 match address WAN_1_cryptomap crypto map Office 2 set peer a.a.a.a crypto map Office interface WAN crypto map MAP 10 set peer a.a.a.a crypto map MAP 10 set ikev1 transform-set OFFICE crypto ikev2 enable WAN crypto ikev1 enable WAN crypto ikev1 policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto ikev1 policy 30 authentication pre-share encryption des hash sha group 1 lifetime 86400 telnet timeout 5 ssh a.a.a.a 255.255.255.255 WAN ssh timeout 30 ssh version 2 console timeout 0 dhcpd auto_config OLD-Private ! threat-detection basic-threat threat-detection statistics host threat-detection statistics access-list threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200 ntp server 129.6.15.28 source WAN prefer webvpn group-policy DfltGrpPolicy attributes vpn-tunnel-protocol ikev1 ssl-client ssl-clientless group-policy admin internal group-policy admin attributes dns-server value 208.67.222.222 156.154.70.1 vpn-tunnel-protocol ikev1 group-policy GroupPolicy_a.a.a.a internal group-policy GroupPolicy_a.a.a.a attributes vpn-tunnel-protocol ikev1 ikev2 group-policy CiscoVPNClient internal group-policy CiscoVPNClient attributes vpn-idle-timeout 30 vpn-session-timeout none vpn-tunnel-protocol ikev1 l2tp-ipsec ssl-clientless split-tunnel-policy tunnelspecified split-tunnel-network-list value CiscoVPNClient_splitTunnelAcl username admin password password encrypted privilege 15 tunnel-group admin type remote-access tunnel-group admin general-attributes address-pool vpnclient authorization-server-group LOCAL default-group-policy admin tunnel-group a.a.a.a type ipsec-l2l tunnel-group a.a.a.a general-attributes default-group-policy GroupPolicy_a.a.a.a tunnel-group a.a.a.a ipsec-attributes ikev1 pre-shared-key ***** ikev2 remote-authentication pre-shared-key ***** ikev2 local-authentication pre-shared-key ***** tunnel-group CiscoVPNClient type remote-access tunnel-group CiscoVPNClient general-attributes address-pool vpnclient default-group-policy CiscoVPNClient tunnel-group CiscoVPNClient ipsec-attributes ikev1 pre-shared-key ***** ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters   message-length maximum client auto   message-length maximum 512 policy-map global_policy class inspection_default   inspect dns preset_dns_map   inspect ftp   inspect h323 h225   inspect h323 ras   inspect rsh   inspect rtsp   inspect esmtp   inspect sqlnet   inspect skinny    inspect sunrpc   inspect xdmcp   inspect sip    inspect netbios   inspect tftp   inspect ip-options   inspect icmp ! service-policy global_policy global smtp-server 192.168.17.10 prompt hostname context no call-home reporting anonymous call-home contact-email-addr admin contact-name admin profile CiscoTAC-1   no active : end asdm image disk0:/asdm-647.bin asdm location c.c.c.c 255.255.255.255 WAN asdm location 192.168.17.2 255.255.255.255 WAN asdm location a.a.a.a 255.255.255.255 OLD-Private no asdm history enable 

  ASA:

  # show crypto ipsec his

  There is no ipsec security associations

  # show crypto isakmp his

  There are no SAs IKEv1

  There are no SAs IKEv2

  2911:

  #show crypto ipsec his

  Interface: GigabitEthernet0/0/0

  Tag crypto map: map, addr a.a.a.a local

  protégé of the vrf: (none)

  local ident (addr, mask, prot, port): (192.168.10.0/255.255.255.0/0/0)

  Remote ident (addr, mask, prot, port): (192.168.17.0/255.255.255.0/0/0)

  current_peer b.b.b.b port 500

  LICENCE, flags is {origin_is_acl},

  #pkts program: encrypt 0, #pkts: 0, #pkts digest: 0

  #pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0

  compressed #pkts: 0, unzipped #pkts: 0

  #pkts uncompressed: 0, #pkts compr. has failed: 0

  #pkts not unpacked: 0, #pkts decompress failed: 0

  Errors of #send 4, #recv errors 0

  local crypto endpt. : a.a.a.a, remote Start crypto. : b.b.b.b

  Path mtu 1500, mtu 1500 ip, ip mtu IDB GigabitEthernet0/0/0

  current outbound SPI: 0x0 (0)

  PFS (Y/N): N, Diffie-Hellman group: no

  SAS of the esp on arrival:

  -Other - arrival ah sas:

  -More-

  -More - CFP sas on arrival:

  -More-

  -More - outgoing esp sas:

  -More-

  -More - out ah sas:

  -More-

  -More - out CFP sas:

  Thanks for your time,

  Nick

  Please add

  map Office 2 set transform-set OFFICE ikev1 crypto

  If it is not helpful, please enable debug crypto ipsec 255 and paste here.
  
  HTH. Please rate if it was helpful. "Correct answer" will be also pleasant.

• site-to-site between ASA 5510 (8.4 (2)) w / static IP and Dlink DIR130 w / dynamic IP.

  I'm trying to implement a VPN site link to site between the ASA5510 we use exclusively as a VPN endpoint on campus and a D-Link DIR130 router off campus, to a local company with a dynamically assigned IP address.  We currently use the ASA to remote access users who use the Cisco VPN client on mobile devices, as well as a link to site-to-site unique in our telecommunications provider for the purposes of remote monitoring telecoms equipment.

  We are looking for a way to deploy at a lower cost of VPN connections for local businesses to allow them to use the devices for sale which connect to systems on campus, so students can use their meal in local restaurants cards, similar to the way they use them in the cafeteria on campus.

  I have experience setting up Cisco switches, routers and APs, but ASA appliance absolutely baffles me.  I futzed with the AMPS 6.4 config autour gui and tried to match the configurations between the DIR130 and the ASA, but I can never get a VPN to come.  Anyone who can point me to an example, or provide me with help on this would be appreciated.  I have google searched and found very little, with my limited experience in setting up ASA, I ask to my script.

  You must configure the static route on the 6509 for 192.168.5.0/24 to ASA inside the interface:

  IP route 192.168.5.0 255.255.255.0 131.162.160.2

  Assuming that 131.162.160.1 is your 6509

• VPN SITE-TO-SITE BETWEEN ASA 5505 ASN 5510 DISORDERS

  Hello everyone, I have a problem with my vpn between two ASAs, I will review the configuration of the two devices running, but I couldn't see anything out of the normal.

  As you can see in the image, that the VPN is upward, but in the ASA 5510 I bytes of Rx (ZERO), I tried to config ASAs yet but I have the same problem, I don't know what I can do, please help me...

  

  Hello

  You should make sure that

  • Remote ends of NAT configurations are correct
    • NAT0 or another type of translation is not configured
    • A NAT rule is the substitution of the rule that you have configured for the VPN L2L?
  • Make sure that you have allowed the circulation/connection you are trying
    • VPN traffic is allowed to bypass the 'external' ACL interface on the remote end or the traffic should be allowed in the 'outer' interface ACL?
  • Make sure that the remote host responds to the same type of its local network connection attempt before trying the same thing from a remote location through VPN L2L
    • If a tested service does not work, try another. For example ICMP is not always the best thing to test connections.

  Can you also give us additional context information.

  • This VPN L2L worked, or did it stop working at some point?
  • I assume that you have administrator access to two ASA? Can you perhaps share some configurations
  • What kind of connections you attempt by the L2L VPN?
    • TCP/UDP/ICMP?
    • IP source and destination?
  • You monitor the newspapers of the SAA through the ASDM on the other end? The device at the remote end which does not send anything back on the L2L VPN connection.

  And as a last post a very common configuration that is absent of configurations of ASA during the test with ICMP

  Make sure you two ASAs have below "icmp inspect" configured

  Policy-map global_policy

  class inspection_default

  inspect the icmp

  -Jouni

• IPSec Tunnel site to Site between ASA (static IP) to the firewall Microtick (dynamic IP) cannot telnet routeros and open https

  I purchased Mikrotik hardware devices and want to use routeros seat firewall cisco asa establish VPN. Aims to establish that a branch may be two IPSEC VPN access devices at the headquarters of the server via the public network.

  But now, I'm having some trouble, so I have cisco asa branches and headquarters to establish successful ipsec vpn.
  (1) branch routeros WAN port using a private IP address and is a member of the asa above outdoor sound created vpn ipsec, vpn successfully established internal servers and I ping the switch at the headquarters of the branch. However, there is a problem, I go through routeros visit that the headquarters of the https server pages can not be opened, telnet internal switches can telnet to the top, but were unable to penetrate into the character.
  (2) in addition, I left the branch routeros on a public IP address WAN port and asa VPN IPSEC created seat, said problems above are not, the server can also be accessed, telnet switch can also enter text and control.
  At the present time, I have encountered this problem of interface not CAN not because I need to create of very, very many industries and the need to establish headquarters communications branch offices so I have to use private IP addresses to access the Wan, unable to do wan are public IP address and headquarters to establish IPSEC VPN.

  now, I can't telnet asa inside the cisco router and open the web inside https, I can't solve the problems.

  now, registrants of asa:

  interface GigabitEthernet0/0
  nameif outside
  security-level 0
  IP 49.239.3.10 255.255.255.0
  !
  interface GigabitEthernet0/1
  nameif inside
  security-level 100
  IP 172.17.0.111 255.255.255.0

  network of the object inside
  172.17.1.0 subnet 255.255.255.0
  network outsidevpn object
  Subnet 192.168.0.0 255.255.0.0

  QQQ

  NAT (inside, outside) static source inside inside destination static outsidevpn outsidevpn non-proxy-arp-search to itinerary

  Route outside 0.0.0.0 0.0.0.0 49.239.3.1 1
  Route inside 172.17.1.0 255.255.255.0 172.17.0.5 1

  Crypto ipsec transform-set esp-3des esp-md5-hmac ikev1 cisco
  Crypto ipsec pmtu aging infinite - the security association
  Crypto dynamic-map cisco 1000 set pfs
  Crypto dynamic-map cisco 1000 set transform-set cisco ikev1
  Crypto dynamic-map cisco 1000 value reverse-road
  Cisco-cisco ipsec isakmp dynamic 1000 card crypto
  cisco interface card crypto outside
  trustpool crypto ca policy
  Crypto isakmp nat-traversal 60
  Crypto ikev1 allow outside
  IKEv1 crypto policy 10
  preshared authentication
  3des encryption
  md5 hash
  Group 2
  life 86400

  IPSec-attributes tunnel-group DefaultL2LGroup
  IKEv1 pre-shared-key *.

  Hello

  Could you share the output of the counterpart of its IPSec cry see the 49.239.3.10 of the other device?

  Kind regards

  Aditya

• When I go on a site that requires a connection and automatically logged, I always get invited by the Office security software for master password. New w/Firefox 24.

  If I go to a Web site that requires a login and a password, and I have it configured to automatically sign in, I am automatically logged (he remembers username and password for this site), but the command prompt of the security apparatus of software for my master password appears. I can cancel the prompt and it goes, but it should not appear because I am already connected. This problem started to happen after I downloaded Firefox 24 yesterday.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Note that Firefox Sync also need to enter the master password.

• VPN tunnel between the concentrator 3005 and router Cisco 827

  I am trying to establish a VPN tunnel between the Central Office with VPN 3005 and controller branch Cisco 827 router.

  There is a router of perimeter with access set up in front of the 3005 list.

  I quote the ACLs on the Central perimeter router instructionsuivante to allow traffic to permit ip 3005 - acl 101 all 193.188.X.X (address of the hub)

  I get the following message appears when I try to ping a local host in the Central site.

  Can Anyoune give me the correct steps to 827 and 3005.

  Thank you

  CCNP Ansar.

  ------------------------------------------------------------------------------------------------------

  Debug crypto ISAKMP

  encryption of debugging engine

  Debug crypto his

  debug output

  ------------------

  1d20h: IPSEC (sa_request):,.

  (Eng. msg key.) Local OUTGOING = 172.22.113.41, distance = 193.188.108.165.

  local_proxy = 202.71.244.160/255.255.255.240/0/0 (type = 4),

  remote_proxy = 128.128.1.78/255.255.255.255/0/0 (type = 1),

  Protocol = ESP, transform = esp - esp-md5-hmac.

  lifedur = 3600 s and KB 4608000,

  SPI = 0x83B8AC1B (2209917979), id_conn = 0, keysize = 0, flags = 0x400D

  1d20h: ISAKMP: ke received message (1/1)

  1d20h: ISAKMP: 500 local port, remote port 500

  1d20h: ISAKMP (0:1): entry = IKE_MESG_FROM_IPSEC, IKE_SA_REQ_MM

  Former State = new State IKE_READY = IKE_I_MM1

  1d20h: ISAKMP (0:1): early changes of Main Mode

  1d20h: ISAKMP (0:1): lot of 193.188.108.165 sending (I) MM_NO_STATE

  1d20h: ISAKMP (0:1): retransmission phase 1 MM_NO_STATE...

  1d20h: ISAKMP (0:1): will increment the error counter on his: retransmit the phase 1

  1d20h: ISAKMP (0:1): retransmission phase 1 MM_NO_STATE

  1d20h: ISAKMP (0:1): lot of 193.188.108.165 sending (I) MM_NO_STATE

  1d20h: ISAKMP (0:1): retransmission phase 1 MM_NO_STATE...

  1d20h: ISAKMP (0:1): will increment the error counter on his: retransmit the phase 1

  1d20h: ISAKMP (0:1): retransmission phase 1 MM_NO_STATE

  1d20h: ISAKMP (0:1): lot of 193.188.108.165 sending (I) MM_NO_STATE

  1d20h: IPSEC (key_engine): request timer shot: count = 1,.

  You must also allow the esp Protocol in your ACL.

  access-list 101 permit esp any host x.x.x.x (address of the hub)

  Hope this helps,

  -Nairi

• ASA VPN server and vpn client router 871

  Hi all

  I have ASA 5510 as simple VPN server and 871 router as simple VPN client. I want to have the user ID and permanent password on 871 and not to re - enter username and password since 871 uses dynamic IP address and every time I have to ' cry ipsec client ezvpn xauth "and type user name and password.

  any suggestions would be much appreciated.

  Thank you

  Alex

  Do "crypto ipsec client ezvpn show ' on 871, does say:

  ...

  Save password: refused

  ...

  ezVPN server dictates the client if it can automatically connect with saved password.

  Set "enable password storage" under the group policy on the ASA.

  Kind regards

  Roman

• RV180 VPN connects and allows you to browse the files, but falls when opening a file.

  Last week, we received our 300Mbps fiber connection. We bought the RV180 due to its high performance, and he manages the speed perfectly.

  However, when you set up VPN, I encountered a strange problem.

  Establishing a QuickVpn or PPTP is simple and connection is no problem. But I'll be fine. I can communicate with QuickVpn or PPTP and find a NAS or PC directory structure, but when I try to open a file the VPC connection drops.

  I activate the remote management.
  I can ping google.com f-l 1472 without fragmentation, so a WAN MTU of 1500 should be ok.
  I have tried disabling attack prevention firewall.

  I have install the following experience: the firmware update (1.0.2.6), restore the default settings.

  Set up the RV180 as follows:

  IPv4 WAN (Internet)

  ------------------------------------------------------------------

  Internet connection type: Automatic Configuration - DHCP

  DNS Server Source: Get dynamically for ISP

  MAC address of the router: use the default address

  IPv4 LAN (local area network)

  ------------------------------------------------------------------

  Host name: RV180

  IP address: 192.168.75.1

  Subnet mask: 255.255.255.0

  Mode DHCP: DHCP Server

  Domain name: LCDVT

  From the IP address: 192.168.75.100

  End IP address: 192.168.75.254

  Rental time: 24

  DNS Proxy: enable

  Preventing attacks

  ------------------------------------------------------------------

  WAN (Internet) security controls

  Meet Ping on WAN (Internet): disabled

  Stealth mode: disabled

  Floods: disabled

  LAN (local area network) security controls

  Block UDP Flood: disabled

  Parameters of the ICSA

  Block the anonymous ICMP Messages: disabled

  Block fragmented packets: disabled

  Block multicast packets: disabled

  VPN users

  ------------------------------------------------------------------

  PPTP server: enabled

  From the IP address: 192.168.75.50

  End IP address: 192.168.75.99

  Table setting VPN Client:

  ---------------------------

  No: 1

  Enabled: enabled

  Username: lcdvt

  Password: *.

  Allow the user to change the password: NA

  Protocol: PPTP

  Web access

  ------------------------------------------------------------------

  Access on the LAN of HTTPS Web Interface: enabled

  Remote management: enabled

  Type of access: IP range

  Start of range: 192.168.75.1

  End of series: 192.168.75.254

  Port number: 443

  Remote SNMP: disabled

  The rest of the menu options are, except for logging policies where I have everything turned on by default.

  In this experiment, I connect from a remote location, start navigating among directories of the drive without any problems and then open a file, after which the VPN connection falls (or some process breaks down). After the transfer of a few 100 KB blocks the VPN connection.

  Error logs

  ------------------------------------------------------------------

  Thu Mar 20 00:39:18 2013(GMT+0100) [rv180] nimfNetIfaceTblHandler [System] [NIMF]: could not get LedPinId

  Thu Mar 20 00:39:25 2013(GMT+0100) [rv180] [System] [PROGRAM] IP: 62.45.238.236

  Thu Mar 20 00:39:25 2013(GMT+0100) [rv180] [System] [PROGRAM] BCAST: 62.45.239.255

  Thu Mar 20 00:39:25 2013(GMT+0100) [rv180] [System] [PROGRAM] subnet: 255.255.254.0

  Thu Mar 20 00:39:25 2013(GMT+0100) [rv180] [System] [PROGRAM] GW: 62.45.238.1

  Thu Mar 20 00:39:25 2013(GMT+0100) [rv180] [System] [PROGRAM] DNS1: 62.45.45.45

  Thu Mar 20 00:39:25 2013(GMT+0100) [rv180] [System] [PROGRAM] DNS2: 62.45.46.46

  Thu Mar 20 00:39:25 2013 (GMT + 0100) [rv180] [System] [PROGRAM] Interface: eth1

  Thu Mar 20 00:39:32 2013(GMT+0100) [rv180] nimfNetIfaceTblHandler [System] [NIMF]: could not get LedPinId

  Thu Mar 20 00:40:58 2013(GMT+0100) [rv180] nimfNetIfaceTblHandler [System] [NIMF]: could not get LedPinId

  Thu Mar 20 00:41:10 2013(GMT+0100) [rv180] [System] [PROGRAM] IP: 62.45.238.236

  Thu Mar 20 00:41:10 2013(GMT+0100) [rv180] [System] [PROGRAM] BCAST: 62.45.239.255

  Thu Mar 20 00:41:10 2013(GMT+0100) [rv180] [System] [PROGRAM] subnet: 255.255.254.0

  Thu Mar 20 00:41:10 2013(GMT+0100) [rv180] [System] [PROGRAM] GW: 62.45.238.1

  Thu Mar 20 00:41:10 2013(GMT+0100) [rv180] [System] [PROGRAM] DNS1: 62.45.45.45

  Thu Mar 20 00:41:10 2013(GMT+0100) [rv180] [System] [PROGRAM] DNS2: 62.45.46.46

  Thu Mar 20 00:41:10 2013 (GMT + 0100) [rv180] [System] [PROGRAM] Interface: eth1

  Thu Mar 20 00:41:19 2013(GMT+0100) [rv180] nimfNetIfaceTblHandler [System] [NIMF]: could not get LedPinId

  Warning logs

  ------------------------------------------------------------------

  Thu Mar 20 00:39:13 2013(GMT+0100) [rv180] [System] [DHCPC] dhcpcDisable: removed dhclient.leases

  Thu Mar 20 00:40:54 2013(GMT+0100) [rv180] [System] [DHCPC] dhcpcDisable: removed dhclient.leases

  Sat 1 Jan 01:02:43 2011 (GMT + 0100) [rv180] [Kernel] [KERNEL] [23.090000] /home/aruns/rv180w/updated_dec19_final/beta-v1/rv180w-common/comps/gpl/ipset/src/ipset/kernel/ip_set.c: ip_set_create: no type set 'nethash', 'setPublicNet' has not created value

  What I am doing wrong? Or the device?

  I am interested in what the solution to these problems.  Research on get a rv180...

  First car of Huntsville and bike e-magazine: www.huntsvillecarscene.com

• Intermittent connections and router suggestions

  Hi all.

  I have problems with my connections sporadically connect and disconnect each time I turn on my Playstation 3. I have all ports forwarded and to be, but I'll always have these problems.

  Here is my current setup:

  Router WRT54G

  Wireless:

  2 notebooks, 1 pc, Nintendo wii and a Nintendo DS to occaisonally

  Wired:

  1 PC, 1 Xbox 360, 1 Playstation 3

  I even put my PS3 on a demilitarized zone and it did not help.

  What should I do to stop the disconnect, and if it requires a better router, which would you recommend?

  Reduce the MTU

  Connect to http://192.168.1.1

  Leave the user name and password - admin

  Change MTU - Manual

  Change the size of 1365

  Click on save settings.

• Communication between the device IDS and router test

  I use a 4210 sensor, S47 Version 4.0 (2). I'm waiting on the upgrade memory provided under the contract until I can update above.

  Is there a way to test telnet between the detection device and the router? Stop ping at the firewall (we allow all ICMP traffic). I can't find a command 'telnet'.

  Thank you!

  John Kingston

  You must create a service account configuration mode (conf t) then:

  user service private service pass

  Sign out then as cisco, then reconnect you as a service. Telnet now works

• problem setting up vpn site-to-site between asa and 1811 router

  I get the following error.

  3. January 8, 2008 | 15: 47:31 | 710003 | 192.168.0.45 | 192.168.0.50. TCP access denied by ACL to 192.168.0.45/3698 to LAN:192.168.0.50/80

  3. January 8, 2008 | 15:47:28 | 710003 | 192.168.0.45 | 192.168.0.50. TCP access denied by ACL to 192.168.0.45/3698 to LAN:192.168.0.50/80

  6. January 8, 2008 | 15:47:28 | 302021 | 192.168.0.45 | 192.168.0.50. Connection of disassembly for faddr gaddr laddr 192.168.0.50/0 192.168.0.50/0 192.168.0.45/1024 ICMP

  6. January 8, 2008 | 15:47:28 | 302020 | 192.168.0.45 | 192.168.0.50. Built of ICMP incoming connections for faddr gaddr laddr 192.168.0.50/0 192.168.0.50/0 192.168.0.45/1024

  5. January 8, 2008 | 15: 47:03 | 713904 | IP = public IP address, encrypted packet received with any HIS correspondent, drop

  4. January 8, 2008 | 15: 47:03 | 113019 | Group = public IP address, Username = public IP address, IP = IP address public, disconnected Session. Session type: IPSecLAN2LAN, duration: 0 h: 00 m: 00s, xmt bytes: 0, RRs bytes: 0, right: Phase 2 Mismatch

  3. January 8, 2008 | 15: 47:03 | 713902 | Group = public IP address, IP = public IP address, peer table correlator withdrawal failed, no match!

  3. January 8, 2008 | 15: 47:03 | 713902 | Group = public IP address, IP = IP address public, error QM WSF (P2 struct & 0x4969c90, mess id 0xf3d044e8).

  5. January 8, 2008 | 15: 47:03 | 713904 | Group = public IP address, IP = IP proposals public, IPSec Security Association all found unacceptable.

  3. January 8, 2008 | 15: 47:03 | 713119 | Group = public IP address, IP = IP address public, PHASE 1 COMPLETED

  6. January 8, 2008 | 15: 47:03 | 113009 | AAA recovered in group policy by default (DfltGrpPolicy) to the user = public IP address

  4. January 8, 2008 | 15: 47:03 | 713903 | Group = public IP address, IP = IP address public, previously allocated memory release for authorization-dn-attributes

  I do not think that because of the incompatibility of encryption. Any help is appreciated.

  Thank you

  Nilesh

  You have PFS (Perfect Forward Secrecy) configured on the ASA and not the router. This could be one of the reasons why the tunnel fails in Phase 2.

  If you do not need a PFS, can you not make a 'no encryption card WAN_map 1 set pfs' the configuration of the ASA and make appear the tunnel.

  Kind regards

  Arul