Intermittent connections and router suggestions

Similar Questions

• Site to Site between ASA VPN connection and router 2800

  I'm trying to get a L2L VPN working between a ASA code 8.4 and a 2800 on 12.4.

  I first saw the following errors in the debug logs on the side of the ASA:

  Error message % PIX | ASA-6-713219: KEY-GAIN message queues to deal with when
  ITS P1 is complete.

  I see the following on the end of 2800:

  ISAKMP: (0): treatment charge useful vendor id
  ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 157
  ISAKMP: (0): provider ID is NAT - T v3
  ISAKMP: (0): treatment charge useful vendor id
  ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 69
  ISAKMP (0): provider ID is NAT - T RFC 3947
  ISAKMP: (0): treatment charge useful vendor id
  ISAKMP: (0): treatment of frag vendor id IKE payload
  ISAKMP: (0): IKE Fragmentation support not enabled
  ISAKMP: (0): entry = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
  ISAKMP: (0): former State = new State IKE_R_MM1 = IKE_R_MM1

  ISAKMP: (0): built NAT - T of the seller-rfc3947 ID
  ISAKMP: (0): send package to x.x.x.x my_port 500 peer_po0 (R) MM_SA_SETUP
  ISAKMP: (0): sending a packet IPv4 IKE.
  ISAKMP: (0): entry = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
  ISAKMP: (0): former State = new State IKE_R_MM1 = IKE_R_MM2

  ISAKMP (0): packet received from x.x.x.x dport 500 sports global (R)

  MM_SA_SETUP
  ISAKMP: (0): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH
  ISAKMP: (0): former State = new State IKE_R_MM2 = IKE_R_MM3

  ISAKMP: (0): processing KE payload. Message ID = 0
  ISAKMP: (0): processing NONCE payload. Message ID = 0
  ISAKMP: (0): found peer pre-shared key x.x.x.x corresponding
  ISAKMP: (2345): treatment charge useful vendor id
  ISAKMP: (2345): provider ID is the unit
  ISAKMP: (2345): treatment charge useful vendor id
  ISAKMP: (2345): provider ID seems the unit/DPD but major incompatibility of 54
  ISAKMP: (2345): provider ID is XAUTH
  ISAKMP: (2345): treatment charge useful vendor id
  ISAKMP: (2345): addressing another box of IOS!
  ISAKMP: (2345): treatment charge useful vendor id
  ISAKMP: (2345): vendor ID seems the unit/DPD but hash mismatch
  ISAKMP: receives the payload type 20
  ISAKMP (2345): sound not hash no match - this node outside NAT
  ISAKMP: receives the payload type 20
  ISAKMP (2345): no NAT found for oneself or peer
  ISAKMP: (2345): entry = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
  ISAKMP: (2345): former State = new State IKE_R_MM3 = IKE_R_MM3

  ISAKMP: (2345): sending package x.x.x.x my_port Exchange 500 500 (R)

  MM_KEY_EXCH

  ----------

  This is part of the configuration of the ASA:

  network of the ABCD object
  10.20.30.0 subnet 255.255.255.0
   
  network of the ABCD-Net object
  172.16.10.0 subnet 255.255.255.0
   
  cry-map-77-ip object-group XXXX object abc-site_Network allowed extended access list
   
  access list abc-site extended permitted ip object-group XXXX object abc-site_Network
   
  ip access list of abc-site allowed extended object abc-site_Network object-group XXXX-60
   
  NAT (any, any) static source 20 XXXX XXXX-20 destination static abc-site_Network abc-site_Network
   
  NAT (any, any) static source 20 XXXX XXXX-20 destination static abc-site_Network abc-site_Network
   
  XXXX-20
   
  object-group network XXXX-20
  ABCD-Net network object
  object-abcd-Int-Net Group
   
  XXXX_127
   
  object-group network XXXX-20
  ABCD-Net network object
  object-abcd-Int-Net Group
   
  ip access list of abc-site allowed extended object abc-site_Network object-group XXXX-60
   
   
  Crypto card off-map-44 11 match address cry-map-77
  card crypto out-map-44 11 counterpart set 62.73.52.xxx
  card crypto out-map-44 11 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  cry-map-77-ip object-group XXXX object abc-site_Network allowed extended access list

  Crypto card off-map-44 11 match address cry-map-77
  card crypto out-map-44 11 counterpart set 62.73.52.xxx
  card crypto out-map-44 11 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  card crypto out-map-44 11 set transform-set ESP-3DES-SHA ikev1

  object-group network XXXX
  ABCD-Net network object
  object-abcd-Int-Net Group

  ------------------------

  Here is a part of the 2800:

  !
  crypto ISAKMP policy 1
  BA 3des
  preshared authentication
  Group 2
  ISAKMP crypto key r2374923 address 72.15.21.xxx
  !
  !
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  !
  card crypto cry-map-1 1 ipsec-isakmp
  the value of 72.15.21.xxx peer
  game of transformation-ESP-3DES-SHA
  match address VPN
  !
  type of class-card inspect match class-map-vpn
  game group-access 100
  type of class-card inspect cm-inspect-1 correspondence
  group-access name inside-out game
  type of class-card inspect correspondence cm-inspect-2
  match the name of group-access outside
  !
  !
  type of policy-card inspect policy-map-inspect
  class type inspect cm-inspect-1
  inspect
  class class by default
  drop
   
  type of policy-card inspect policy-map-inspect-2
  class type inspect class-map-vpn
  inspect
  class type inspect cm-inspect-2
  class class by default
  drop
  !

  !
  interface FastEthernet0
  IP address 74.25.89.xxx 255.255.255.252
  NAT outside IP
  IP virtual-reassembly
  security of the outside Member area
  automatic duplex
  automatic speed
  crypto cry-card-1 card
  !
  interface FastEthernet1
  no ip address
  Shutdown
  automatic duplex
  automatic speed
  !
  IP nat inside source overload map route route-map-1 interface FastEthernet0
  !
  IP access-list extended inside-out
  IP 172.16.10.0 allow 0.0.0.255 any
  IP nat - acl extended access list
  deny ip 192.168.0.0 0.0.255.255 172.16.10.0 0.0.0.255
  deny ip 10.200.0.0 0.0.255.255 172.16.10.0 0.0.0.255
  deny ip 192.168.0.0 0.0.255.255 172.16.10.0 0.0.0.255
  deny ip 0.0.255.255 28.20.14.xxx.0.0 172.16.10.0 0.0.0.255
  refuse the 10.10.10.0 ip 0.0.0.255 172.16.10.0 0.0.0.255
  refuse the 172.16.10.0 ip 0.0.0.255 192.168.0.0 0.0.255.255
  refuse the 172.16.10.0 ip 0.0.0.255 10.200.0.0 0.0.255.255
  refuse the 172.16.10.0 ip 0.0.0.255 192.168.0.0 0.0.255.255
  refuse the 172.16.10.0 ip 0.0.0.255 28.20.14.xxx.0.0 0.0.255.255
  refuse the 172.16.10.0 ip 0.0.0.255 10.10.10.0 0.0.0.255
  allow an ip
  outside extended IP access list
  allow an ip
  list of IP - VPN access scope
  IP 172.16.10.0 allow 0.0.0.255 192.168.0.0 0.0.255.255
  IP 172.16.10.0 allow 0.0.0.255 10.200.0.0 0.0.255.255
  IP 172.16.10.0 allow 0.0.0.255 192.168.0.0 0.0.255.255
  IP 172.16.10.0 allow 0.0.0.255 28.20.14.xxx.0.0 0.0.255.255
  IP 172.16.10.0 allow 0.0.0.255 10.10.10.0 0.0.0.255
  IP 192.168.0.0 allow 0.0.255.255 172.16.10.0 0.0.0.255
  IP 10.200.0.0 allow 0.0.255.255 172.16.10.0 0.0.0.255
  IP 192.168.0.0 allow 0.0.255.255 172.16.10.0 0.0.0.255
  28.20.14.xxx.0.0 0.0.255.255 ip permit 172.16.10.0 0.0.0.255
  ip licensing 10.10.10.0 0.0.0.255 172.16.10.0 0.0.0.255

  access-list 23 allow 192.168.0.0 0.0.255.255
  access-list 23 allow 10.200.0.0 0.0.255.255
  access-list 23 allow 172.16.10.0 0.0.0.255
  access-list 123 note category class-map-LCA-4 = 0
  access-list 123 allow ip 192.168.0.0 0.0.255.255 172.16.10.0 0.0.0.255
  access-list 123 allow ip 10.200.0.0 0.0.255.255 172.16.10.0 0.0.0.255
  access-list 123 allow ip 192.168.0.0 0.0.255.255 172.16.10.0 0.0.0.255
  access-list 123 allow ip 0.0.255.255 28.20.14.xxx.0.0 172.16.10.0 0.0.0.255
  access-list 123 allow ip 10.10.10.0 0.0.0.255 172.16.10.0 0.0.0.255
  access-list 123 allow ip 172.16.10.0 0.0.0.255 192.168.0.0 0.0.255.255
  access-list 123 allow ip 172.16.10.0 0.0.0.255 10.200.0.0 0.0.255.255
  access-list 123 allow ip 172.16.10.0 0.0.0.255 192.168.0.0 0.0.255.255
  access-list 123 allow ip 172.16.10.0 0.0.0.255 28.20.14.xxx.0.0 0.0.255.255
  access-list 123 allow ip 172.16.10.0 0.0.0.255 10.10.10.0 0.0.0.255
  !
  !
  !

  !
  route-map-1 allowed route map 1
  match the IP nat - acl
  !

  Hello

  I quickly browsed your config and I could notice is

  your game of transformation (iskamp) on SAA and router are not the same, try to configure the same on both sides.

  in the statement of the ASA NAT you gave (any, any) try to give the name of the interface instead of a whole.

• direct mail advertising by intermittent connection and password

  Windows live mail intermittently will not connect to my accounts of att and bellsouth.  If I leave completely direct mail and back, sometimes it will search for emails.  I have double and triple checked that the settings are correct.   It began a few weeks ago.

  The message displayed is:

  Can't send or receive messages for the ** address email is removed from the privacy * account. An incorrect password was entered. The next time that you send or receive messages, you will be asked to enter your user name and password for this account.

  Server error: 0x800CCC90
  Server response:-ERR [IN USE] maildrop busy.
  Server: 'inbound.att.net '.
  Windows Live Mail error ID: 0x800CCC92
  Protocol: POP3
  Port: 995
  Secure (SSL): Yes

  Server response:-ERR [IN USE] maildrop busy.

  The message about passwords is a red herring.

  It may be a connection to a POP3 mailbox at a time box. If you access this account by any other means, for example from a smartphone or other mobile device, then if it is configured for push email, Windows Live Mail will not get a look in. Disable any other e-mail application that accesses the same account to see if the error in Windows Live Mail does not disappear.

  The fault can also occur if the polling interval is shorter that the server will allow. When you view your list of messages, press Ctrl-Shift-O for Options. What is the interval in the arrival of new messages every n minutes? If it is less than 15 minutes, do 15.

• Log each ASA connection and router

  Hello

  I have a Cisco ASA 5520 and a Cisco 3825 router in my network. I want to log every connection to these devices. There are a few users who have different levels of access to these devices in n/w. I would like to connect all these users and what they actually change and to implement in the devices. Is this possible using a RADIUS server or any other method pls. I also have access to reading / writing to these devices. Thank you very much

  You can do it too.

  You can use auth-proxy (router) passage proxy (ASA) to have the user to authenticate to the connections he and do accounting of GBA. But I don't think you need to do this for all connections, for those who require the intervention of the user.

  Let us know if that answers the question.

  PK

• PC cable loss of internet connection with router WRT160N V2

  I'm new to routers and I just added a router WRT160N (V2).  Wireless through my laptop is great. However, I have 1 PC connected physically to the router. The internet connection is sporadic on this PC. I have "wireless" internet service high speed and sometimes you click internet or check your emails, and there is no internet connection. It seems to be after the PC has been idle for a while. When you click on the internet icon PC on the router not even flashes her - it's like the PC and the router do not speak. If it does not connect, the connection is great. Any help would be appreciated!

  There is a known problem with intermittent connectivity and firmware to build 11 for the WRT160N V2. 11 is the current firmware on the Linksys site. Check if you have 11 build if your router is a V2.
  Downgraded to build 8 fits usually correct these deficiencies, but Linksys told several people that they do not have firmware version 8 to give end users.

  It's ONLY for the WRT160N V2 router. This firmware will not work on WRT160N V1.

  You can find it at http://audipages.com/router/

  Follow download them and instructions to downgrade firmware on this page.

• WD MyCloud NAS connection low or intermittent connection on new router WRT1900ACS

  I installed a new router WRT1900ACS to replace a former Cisco router and now I get a low or intermittent connect error message. Here is the error message I get:

  I have reflashed the latest firmware (1.0.0.169041), reset the router and set it back and from this moment, it seems to be. So I consider this problem.

• Wireless connection unavailable on laptop, but shows all ok on pc and router

  I was at Midway through a conversation today on msn when my wireless connection (on my laptop) disappeared. I checked my pc and everything seems ok, here, my netgear router shows that everything is fine. When I click on 'Find a wireless network' his party! I can access the net very well by plugging it but as soon as I go wireless, I still lost.

  Tried to connect manually - says network with that name already there
  Tried to re start all
  All cables checked

  It's a laptop Toshiba L300
  Virgin cable broadband
  Router NETGEAR Wireless

  everything works fine as long as I'm using the cables.

  I only had my laptop and router wireless for a month.

  Please any other ideas what to do, I really need to be wireless for work as soon as possible

  Hello severina_falls,

  Thanks for posting on the Microsoft answers Community Forum.

  I have some suggestions for you to see if we can provide you with your wireless connection.

  (1) check that the WiFi switch is on on the front panel of your laptop. It is a quick check
  (2) Recycle the router wireless on and outside. Wait at least one minute, then turn it back on. Retest with your wireless network.
  (3) are getting you the error messages in the case where connects to deal with your wireless connection?
  To join the event logs: click on the Start button, right-click computer, click on manage.
  If you receive a notification of user account control , simply click on continue.
  Double-click Event Viewer. Study summary of the the event logs for errors dealing with wireless.
  (4) use System Restore to get your iIf wireless upward and running, you have a System Restore Point that was before starting the problem with your wireless network.
  Use the following KB to get the procedure on the system restore.
  936212 KB - how to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212

  If please post again and let us know if it helped to solve your problem or if you need further assistance.

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Have the intermittent connection when you use WiFi and conflict error IP address when using Ethernet

  I have intermittent problems with my wireless internet connection. I contacted the ISP and they analyzed the configuration of the modem-router, changed some and told me to try to reconnect. I try again and the connection is OK. The ISP has caress each other on the back and sent me on my merry way not-so-small. Problem is at an unpredictable time, problems (do) happen.

  Usually the failure scenario does not have a huge problem - plus one
  gene as a problem. I just keep trying to connect through Windows
  Network and sharing Center, and possibly the connection is made. But in some cases, time is critical; I eventually lose 10 to 20 minutes of typing-search-typing-correction-etc in a web form when the connection disappears before making a SHIPMENT. (Some time, after the failed wireless and re - connect, I was actually able to recover pretty quickly that the site has not been exceeded me.) So in this scenario I can't lost any strike.)

  I would like to connect my pc to the internet via an ethernet cable
  the modem-router. I could take this approach right after the wireless
  connection failed. Or in a preventive way, when I know I'll be typing-
  mode of research-type-fixed-etc and I want to be really sure. When I tried this, I get the error "Windows has detected an IP address conflict.

  What I do at this point to get around the Wi - Fi connection and connect through the Ethernet cable?

  The topic is edited for clarity of the moderator.* *.

  [Original title: LOST INTERMITTENT WIRELESS INTERNET CONNECTION]

  It is not clear what parameters your ISP technology management may have changed on your modem/router.  As a general rule, the ISP concerned the link between their server and your modem, but any fiddling with settings that control this link will not effect either on the link between your computer and the modem/router.

  If you still haven't reset your router to its default settings, do not unless you know the necessary internal router settings for you connect to your ISP.  If you have a cable Internet connection, the default settings may work OK, but if you have a DSL, they probably won't.

  You should not get this "IP address conflict" error when you connect the Ethernet cable.  Follow these steps:

  Open the "network and sharing Center" and then click on "change adapter settings".  You should see an icon for your wireless network adapter and an icon for your 'connection to the Local network' (your Ethernet connection).

  • Right click on each of the icons, and select 'properties '.
  • There should be a list titled "this connection uses the following items."  In this list, select "Internet Protocol Version 4 (TCP/IP)" and then click "Properties".
  • The radio buttons to "Obtain an IP address automatically" and "Obtain DNS server address automatically" should both selected.  If this is NOT the case, do so and OK your way out.  Furthermore, cancel your way.

  If a card has been configured to use a specific IP address, your "IP address conflict" should now be fixed (you may need to restart the computer for the change to take effect).

  If cards were already configured to obtain its IP address automatically, the problem lies in the configuration of your router.  You will need to access the router's Web utility to study and make changes.  To help you provide the brand and model of the router of the label on the back or the bottom.  Also do the following to a time where you have an Internet connection:

  Open a command prompt window (type cmd in the search box and press enter)

  1. In the black command prompt window, type the following command, and press ENTER after each line

  ipconfig/all > "% userprofile%\Desktop\ipinfo.txt".

  Notepad '% userprofile%\Desktop\ipinfo.txt '.

  output

  1. In the opened Notepad window, click Edit > select all (or press CTRL + A) and then click Edit > copy (or press Ctrl + C)
  2. In the body of your Question, right-click > paste (or press CTRL + V) the data of the Notepad window
  3. Close Notepad and remove ipinfo.txt from your desktop

• Im having trouble with my iphone 16 GB ios 9.3.3 5s (G 13, 34) receive error code 22 tries to connect to the server, and nowhere suggestions?

  Im having trouble with my iphone 16 GB ios 9.3.3 5s (G 13, 34) receive error code 22 tries to connect to the server, and nowhere suggestions? I have tried almost everything turn power switch wifi in the middle and doing it to try to track down the problem in the Device Manager and im completely disgusted

  Have you tried turning off and back on again?

• Ink advantage 2545: changed the name of the wireless router and now ink advantage 2545 does not connect and I'm out of ideas

  I have a Toshiba laptop 64 bit running Windows 10 Home, 8 GB, 1 t hard drive.

  Router is a Samsung phone using Android because it was the only router that I could find which would take the wireless signal.

  I live very pastoral, no neighbours for miles, so I never saw the need for a password on my router.

  Now, some people are installs in less than 400 feet from me, and I think they're piggybacking on my Wifi because my access speed has slowed considerably since they moved in.

  So I decided to change the password of the router, unfortunately, I can not put in any password I want.  It gives me the opportunity to have a predefined password.  So I changed the name of the router I could do without problem.

  My computer very quickly without any problem, however, my printer which worked great for a year with the old router name does not connect on the new name of the router.

  Here is what I tried:

  I had hoped he would ask me for a new name / password, but it did not.

  Then I plugged a cable between the printer and the laptop in the hopes that it would produce a different kind of results.  It has not changed anything.  There is no screen menu on what that be like this on the printer.

  I pressed the wireless button that has the flashing blue light and nothing happened.

  I pressed the button, don't know what it is, but it has a white light, and nothing happened.

  I went on the HP site and followed the instructions but he just said do not connect the cable until told to do so.  So I disconnected everything, lights out and turned back on and still no connection and no invite to plug whatever it is.

  Y at - it everywhere where I have being a novice could get instructions on how to get this working?

  I appreciate any help you can give me.  Thank you.

  Hello

  I think you are talking about SSID. Please, think of it as a new router and use the following ways to correct:

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html
  
  Kind regards.

• I accidentally entered my password in the field 'user ID' a website connection, and pre-populating it now appear in the list of suggestions for that field. Is there a way to make the pre-fill 'forget' a specific entry?

  While connecting to a secure Web site, I was typing too fast and accidentally included my password in the field ID used while connection and press enter before I realized my mistake. I then connected properly, but now Firefox include this false entry (with another entry accidentally misspelled) in the list of suggestions of pre-filling every time I go to this page. I prefer not to cut completely from pre-filling, but obviously I don't want my password to be specified. Can I delete the wrong entry in the list of suggestions as pre-filling watch somehow? (I use Firefox 6.0 on Windows 7)

  Select the entry in the drop-down menu and press "DELETE", Mac users, press 'Shift + Delete '.

• Cannot access Internet even if the router USB adapter Wireless G made the connection and

  Hello, I recently bought a Wireless-G USB Network Adapter with SpeedBooster model WUSB54GSC to go with my Wireless-G Broadband Router model WRT54G2 and I can't access the internet.  The laptop tells me I am connected and that force is Excellent, but when I open my browser, I can't access any site at all. When I try to add the laptop to my network magic on my computer, it tells me that it cannot connect with the laptop.  My Nintendo Wii and Itouch work perfectly with the router so I think it's my browser settings, but I can't understand it.  Thank you!

  Hey, thanks for trying to help out.  It turns out that my firewall did not allow the laptop to access the internet.  I made a few adjustments on my firewall settings and it all worked out great.

• connection and installation of router

  From the beginning, when I bought the years WRT54G the CD never worked there. I had to call tech support to guide me through the phone (he admitted that I could not install with CD). Now when I crashed and lost or corrupted settings in my computer (XP) and there is no guarantee of more I have to use the manual installation to reinstall. My question relates to the stage where I'm supposed to 'renew' ip address of my computer by using the command function. If I go into the command to change this ip address, which affect the dsl service my ISP gives me, as well as internet access or programs will not install on my computer? Why should I change the ip address of the computer?

  Eureka! You are a genius scrooge. Thank you! Your suggestions worked, and I write this response on my wireless computer. Why is - what the Linksys utility (s) cannot take into account these parameters?

  More dare I say, opening a session on this forum is always a roundabout confused circle compared to any other forum, in that I never recorded.  For example, if I wanted to reply to your message I think advising me in my email, what is the direct procedure to connect and answer without having to do a search after error messages telling me I do not exist, the message has been deleted, or I'm not authenticated etc. ?

  Thanks again

• No Wireless Connection and can not only change the router

  I have messed around with my router configuration to try to make my NAt type open and somehow messed up the Internet. I set kind of it and now I can connect to the internet if I connect directly to the router but I can't always have a wireless connection and I also can't change the router setting more? I followed the steps back to get my ip address and it used to be 192.168.1.1, but now his 192.168.1.2 I don't know what I please help.

  Hi estesblake,

  (1) do you get an error message when you try to access wireless internet?

  (2) what is the number of brand and model of your router?

  Follow the steps outlined in the article below to fix the problem of wireless network connection

  Wireless network connection problems in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows?T1=tab02

  Regarding router problem check the documentation that came with the device or contact the manufacturer of the device.

• I have only 2 computers, a desktop computer and a laptop computer. Yet, every time I switch from one to the other, I get a message that I am already connected to TWO. It's impossible because I only have 2 and it is not connected. Any suggestions on fixing

  I have only 2 computers, a desktop computer and a laptop computer. Yet, every time I switch from one to the other, I get a message that I am already connected to TWO. It's impossible because I only have 2 and it is not connected. Any suggestions on fixing that?

  Hi Kelly,

  Maximum machines, the license can be activated is 2. Somehow, it seems that on your side the same license can be activated on any 3rd machine as well.

  Activating the license on any other machine, please select the option to disconnect all other devices and try again.

  Reference: connect and disconnect activate Cloud Creative applications (deactivated)

  Kind regards

  Sheena