Site to site vpn errors.
When you configure a site to tunnles, I get errors in logging of ASA of gall.
I've included the two configs on the walls of ASA file.
any one see what Miss me?
small site
: Saved
: Written by usiadmin at 15:22:08.143 UTC Monday, March 19, 2012
!
ASA Version 7.2 (3)
!
hostname smallASA
domain.com domain name
activate awSQhSsotCzGWRMo encrypted password
names of
!
interface Vlan1
nameif inside
security-level 100
IP 10.16.4.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP 116.12.211.66 255.255.255.240
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
L0Wjs4eA25R/befo encrypted passwd
passive FTP mode
DNS lookup field inside
DNS server-group DefaultDNS
Server name 10.10.20.1
domain.com domain name
access extensive list ip 10.16.4.0 outside_1_cryptomap allow 255.255.255.0 any
access extensive list ip 10.16.4.0 inside_nat0_outbound allow 255.255.255.0 any
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 523.bin
don't allow no asdm history
ARP timeout 14400
NAT-control
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
Route outside 0.0.0.0 0.0.0.0 116.12.211.65 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout, uauth 0:05:00 absolute
Enable http server
http 0.0.0.0 0.0.0.0 outdoors
http 10.16.4.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
card crypto outside_map 1 match address outside_1_cryptomap
card crypto outside_map 1 set pfs
peer set card crypto outside_map 1 12.69.103.226
card crypto outside_map 1 set of transformation-ESP-3DES-SHA
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Crypto isakmp nat-traversal 20
Telnet 10.16.4.0 255.255.255.0 inside
Telnet timeout 5
SSH 10.16.4.0 255.255.255.0 inside
SSH 0.0.0.0 0.0.0.0 outdoors
SSH timeout 5
Console timeout 0
dhcpd dns 165.21.83.88 10.10.2.1
dhcpd domain domain.com
dhcpd outside auto_config
!
dhcpd address 10.16.4.100 - 10.16.4.131 inside
dhcpd allow inside
!
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
!
global service-policy global_policy
usiadmin encrypted DI5M5NnQfLzGHaw1 privilege 15 password username
initech encrypted ENDpqoooBPsmGFZP privilege 15 password username
tunnel-group 12.69.103.226 type ipsec-l2l
IPSec-attributes tunnel-group 12.69.103.226
pre-shared key, PSK
context of prompt hostname
Cryptochecksum:e6bf95f3c25574bfed2adafb3283e882
: end
large site
: Saved
: Written by usiadmin to the 22:57:30.549 CDT Monday, March 19, 2012
!
ASA Version 8.0 (3)
!
hostname STO-ASA-5510-FW
domain.com domain name
enable the password... Ge0JnvJlk/gAiB encrypted
names of
192.168.255.0 BGP-Transit_Network description name Transit BGP
name 10.10.99.0 VPN
name 10.10.2.80 BB
DNS-guard
!
interface Ethernet0/0
Inside the Interface Description
nameif inside
security-level 100
IP 10.10.200.29 255.255.255.240
OSPF cost 10
!
interface Ethernet0/1
Description external Interface facing the Rotuer for Internet.
nameif outside
security-level 0
IP 12.69.103.226 255.255.255.240
OSPF cost 10
!
interface Ethernet0/2
Description physical interface trunk - do not use
No nameif
no level of security
no ip address
!
interface Ethernet0/2.900
Description Interface DMZ 12.69.103.0 / 26 (usable hotes.1 a.62)
VLAN 900
nameif DMZ1-VLAN900
security-level 50
IP 12.69.103.1 255.255.255.192
OSPF cost 10
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
nameif management
security-level 100
IP 10.10.5.250 255.255.254.0
OSPF cost 10
management only
!
L0Wjs4eA25R/befo encrypted passwd
banner exec **********************************************************************
exec banner STO-ASA-5510-FW
exec banner ASA5510 - 10.10.200.29
exec banner configured for data use only
banner exec **********************************************************************
banner login **********************************************************************
connection of the banner caveat: this system is for the use of only authorized customers.
banner of individuals to connect using the system of computer network without permission.
banner login or exceeding their authority, are subject with all their
activity of connection banner on this system monitored and recorded by computer network
staff of the login banner system. To protect the computer network system of
banner of the connection of unauthorized use and to ensure that computer network systems is
connection of banner works properly, system administrators monitor this system.
banner connect anyone using this computer network system expressly consents to such a
banner of the connection monitoring and is advised that if such monitoring reveals possible
conduct of connection banner of criminal activity, system personnel may provide the
evidence of connection banner of such activity to the police.
connection banner that access is restricted to the authorized users only. Unauthorized access is
connection banner, a violation of State and federal, civil and criminal.
banner login **********************************************************************
passive FTP mode
clock timezone CST - 6
clock to summer time recurring CDT
DNS server-group DefaultDNS
domain universalsilencer.com
permit same-security-traffic intra-interface
object-group service SAP tcp - udp
Description SAP updates
port-object eq 3299
object-group Protocol TCPUDP
object-protocol udp
object-tcp protocol
object-group service HUMANLand tcp
port-object eq citrix-ica
DM_INLINE_TCP_1 tcp service object-group
EQ port 5061 object
port-object eq www
EQ object of the https port
DM_INLINE_TCP_2 tcp service object-group
EQ port 5061 object
port-object eq www
EQ object of the https port
DM_INLINE_UDP_1 udp service object-group
EQ port-object snmp
port-object eq snmptrap
object-group service DM_INLINE_SERVICE_1
ICMP service object
the purpose of the service tcp - udp eq www
the purpose of the udp eq snmp service
the purpose of the udp eq snmptrap service
the eq syslog udp service object
the eq 2055 tcp service object
the eq 2055 udp service object
EQ-3389 tcp service object
object-group service human tcp - udp
port-object eq 8100
object-group service grove tcp
port-object eq 2492
netflowTcp tcp service object-group
port-object eq 2055
object-group service 6144 tcp - udp
6144 description
port-object eq 6144
object-group service 1536-DMPA-inter-tcp - udp
1536-DMPA-inter description
port-object eq 1536
the DM_INLINE_NETWORK_1 object-group network
network-object 198.78.0.0 255.255.0.0
network-object 207.152.0.0 255.255.0.0
network-object 69.31.0.0 255.255.0.0
the DM_INLINE_NETWORK_2 object-group network
network-object 198.78.0.0 255.255.0.0
network-object 207.152.0.0 255.255.0.0
network-object 69.31.0.0 255.255.0.0
the DM_INLINE_NETWORK_3 object-group network
network-object 198.78.0.0 255.255.0.0
network-object 207.152.0.0 255.255.0.0
network-object 69.31.0.0 255.255.0.0
the DM_INLINE_NETWORK_4 object-group network
network-object 198.78.0.0 255.255.0.0
network-object 207.152.0.0 255.255.0.0
network-object 69.31.0.0 255.255.0.0
object-group service rdp tcp
RDP description
EQ port 3389 object
the DM_INLINE_NETWORK_5 object-group network
network-object 10.16.0.0 255.255.0.0
object-network 10.16.0.0 255.255.255.0
the DM_INLINE_NETWORK_6 object-group network
network-object 10.16.0.0 255.255.0.0
object-network 10.16.0.0 255.255.255.0
the DM_INLINE_NETWORK_7 object-group network
network-object 10.16.0.0 255.255.0.0
object-network 10.16.0.0 255.255.255.0
the DM_INLINE_NETWORK_8 object-group network
network-object 10.16.0.0 255.255.0.0
object-network 10.16.0.0 255.255.255.0
access outside the 207.152.125.136 note list
extended access list to refuse any newspaper outdoors the object-group objects DM_INLINE_NETWORK_1 TCPUDP-group
scope of list of outdoor access to refuse the object-group objects DM_INLINE_NETWORK_2 host 12.69.103.129 TCPUDP-group
extended access list to refuse the object-group TCPUDP outdoors any object-group DM_INLINE_NETWORK_3
scope of list of outdoor access to refuse the subject-TCPUDP 12.69.103.129 host object group DM_INLINE_NETWORK_4
access outside the note list * in Bound SAP traffic by Ron Odom update *.
list of access outside the scope permitted tcp host 194.39.131.34 host 12.69.103.155 3200 3300 Journal range
access outside the note list * router SAP *.
list of access outside the permitted range tcp host 10.10.2.110 host 194.39.131.34 3200 3300
extended access list permits object-group DM_INLINE_SERVICE_1 outside any host 12.69.103.154
access outside the note list * entrants to the mail server to 10.10.2.10 Peter K *.
list of extended outside access permit tcp any host 12.69.103.147 eq smtp
access outside the note list * incoming to the OCS EDGE on DMZ Peter K *.
access list outside extended permit tcp any host 12.69.103.2 object - group DM_INLINE_TCP_1
list of external extended ip access permits any host 12.69.103.6
list of access outside the comment flagged for malware activity
scope of list of outdoor access to deny the host ip 77.78.247.86 all
list of external extended ip access permits any host 12.69.103.156 inactive
list of extended outside access permit tcp any host 12.69.103.147 eq www
list of extended outside access permit tcp any host 12.69.103.147 eq https
access outside the note list * incoming hosting 10.10.3.200 - Dan K *.
list of extended outside access permit tcp any host 12.69.103.145 eq www
list of extended outside access permit tcp any host 12.69.103.145 eq https
access outside the note list * journey to host 10.10.2.30 USIFAXBACK - Dan K *.
list of extended outside access permit tcp any host 12.69.103.146 eq www
list of extended outside access permit tcp any host 12.69.103.146 eq https
access outside the note list * incoming hosting 10.10.8.5 - Mitel 7100 BOB M 4/4-2008 - BV *.
list of extended outside access permit tcp any host 12.69.103.152 eq pptp
access list outside extended permit tcp any host 200.56.251.118 object - group HUMANLand
list of extended outside access permit tcp any host 200.56.251.121 eq 8100
outdoor access list note allow all return ICMP traffic off in order to help the attacks of hidden form
extended the list of outdoor access to deny icmp everything no matter what newspaper
list of allowed outside access extended ip 10.14.0.0 255.255.0.0 all open a debug session
list of allowed outside access extended ip 10.15.0.0 255.255.0.0 any
list of allowed outside access extended ip object-group DM_INLINE_NETWORK_7 all
outdoor access list extended permits all ip 10.14.0.0 255.255.0.0 debug log
outdoor access list extended permits all ip 10.15.0.0 255.255.0.0
list of external extended ip access permits any object-group DM_INLINE_NETWORK_6
list of access outside the scope permitted udp host 12.88.249.62 any DM_INLINE_UDP_1 object-group
Note added to pervent bocking human outside access list
list of access outside the permitted scope object-TCPUDP host 10.12.2.250 host 200.56.251.121 human group object
Note added to pervent bocking human outside access list
list of access outside the permitted scope object-TCPUDP host 200.56.251.121 host 10.12.2.250 human group object
outside the permitted scope of access tcp list any any eq log pptp
extended access list to refuse the object-group TCPUDP outdoors everything any object-group 6144
VPN-SplitTunnel extended 10.10.0.0 ip access list allow 255.255.0.0 VPN 255.255.255.192
extensive list of access VPN-SplitTunnel ip 10.11.0.0 255.255.0.0 VPN 255.255.255.192 allow
extended VPN-SplitTunnel access list ip 10.12.0.0 allow 255.255.0.0 VPN 255.255.255.192
extended VPN-SplitTunnel access list ip 10.13.0.0 allow 255.255.0.0 VPN 255.255.255.192
list of access VPN-SplitTunnel extended permitted ip VPN BGP-Transit_Network 255.255.255.0 255.255.255.192
list of access VPN-SplitTunnel extended permitted ip 10.0.0.0 255.0.0.0 192.168.10.0 255.255.255.0
VPN-SplitTunnel extended 10.10.0.0 ip access list allow 255.255.0.0 10.14.4.0 255.255.254.0
VPN-SplitTunnel extended 10.10.0.0 ip access list allow 255.255.0.0 10.15.4.0 255.255.254.0
VPN-SplitTunnel extended 10.10.0.0 ip access list allow 255.255.0.0 10.14.8.0 255.255.254.0
Note DMZ1_in access-list * OCS - 2nd interface to inside EDGE welcomes Peter K *.
DMZ1_in list extended access permit tcp host 12.69.103.3 host 10.10.2.15 DM_INLINE_TCP_2 object-group
Note DMZ1_in of access list permit all ICMP traffic
DMZ1_in access list extended icmp permitted any any newspaper
DMZ1_in deny ip extended access list all 207.152.0.0 255.255.0.0
DMZ1_in list extended access deny ip 207.152.0.0 255.255.0.0 any
Note DMZ1_in access-list * explicitly block access to all domestic networks *.
Note access-list DMZ1_in * no need allowed inside networks *.
Note DMZ1_in access-list * to do above this section *.
DMZ1_in list extended access deny ip any 10.0.0.0 255.0.0.0
DMZ1_in list extended access deny ip any 172.16.0.0 255.240.0.0
DMZ1_in list extended access deny ip any 192.168.0.0 255.255.0.0
Note DMZ1_in access-list * IP Allow - this will be the internet *.
DMZ1_in list of allowed ip extended access all any debug log
ezvpn1 list standard access allowed 10.0.0.0 255.0.0.0
access-list DMZ1-VLAN900_cryptomap extended ip allowed any one
access-list sheep extended ip 10.10.0.0 allow 255.255.0.0 VPN 255.255.255.192
IP 10.11.0.0 allow Access-list extended sheep 255.255.0.0 VPN 255.255.255.192
IP 10.12.0.0 allow Access-list extended sheep 255.255.0.0 VPN 255.255.255.192
access-list extended sheep ip 10.13.0.0 allow 255.255.0.0 VPN 255.255.255.192
access-list sheep extended ip VPN BGP-Transit_Network 255.255.255.0 allow 255.255.255.192
access-list extended sheep allowed ip 10.0.0.0 255.0.0.0 192.168.10.0 255.255.255.0
access-list sheep extended ip 10.10.0.0 allow 255.255.0.0 10.14.4.0 255.255.254.0
access-list sheep extended ip 10.10.0.0 allow 255.255.0.0 10.14.8.0 255.255.254.0
access-list extended sheep allowed ip 10.0.0.0 255.0.0.0 10.14.0.0 255.255.0.0
access-list sheep extended ip 10.10.0.0 allow 255.255.0.0 10.15.4.0 255.255.254.0
access-list extended sheep allowed ip 10.0.0.0 255.0.0.0 10.15.0.0 255.255.0.0
permit traffic to access extended list ip 10.0.0.0 255.0.0.0 10.14.0.0 inactive 255.255.0.0
outside_cryptomap to access ip 10.0.0.0 scope list allow 255.0.0.0 10.15.0.0 255.255.0.0
access extensive list ip 10.14.0.0 outside_nat0_outbound allow 255.255.0.0 VPN 255.255.255.192
access extensive list ip 10.15.0.0 outside_nat0_outbound allow 255.255.0.0 VPN 255.255.255.192
outside_nat0_outbound list extended access allowed object-group ip VPN DM_INLINE_NETWORK_8 255.255.255.192
outside_cryptomap_1 to access ip 10.0.0.0 scope list allow 255.0.0.0 DM_INLINE_NETWORK_5 object-group
pager lines 24
Enable logging
timestamp of the record
logging list VPN informational level class auth
logging list class VPN config level criticism
VPN vpn list logging level notification class
notification of log list VPN vpnc level class
VPN list logging level notifications class webvpn
logging alerts list any level
exploitation forest-size of the buffer of 256000
logging buffered all
logging VPN trap
asdm of logging of information
host of inside the 10.10.2.41 logging format emblem
logging ftp-bufferwrap
connection server ftp 10.10.2.41 \logs usi\administrator 178US1SIL3 ~.
Within 1500 MTU
Outside 1500 MTU
MTU 1500 DMZ1-VLAN900
management of MTU 1500
mask 10.10.99.1 - 10.10.99.63 255.255.255.192 IP local pool Clients_vpn
no failover
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any inside
ICMP allow all outside
ICMP allow any DMZ1-VLAN900
ASDM image disk0: / asdm - 611.bin
ASDM location VPN 255.255.255.192 inside
ASDM location BGP-Transit_Network 255.255.255.0 inside
ASDM location 10.10.4.60 255.255.254.255 inside
ASDM location 255.255.255.255 inside BB
ASDM location 10.16.0.0 255.255.0.0 inside
ASDM location 69.31.0.0 255.255.0.0 inside
ASDM location 198.78.0.0 255.255.0.0 inside
ASDM location 10.16.0.0 255.255.255.0 inside
enable ASDM history
ARP timeout 14400
Global (inside) 1 10.10.2.4 netmask 255.0.0.0
Global (outside) 10 12.69.103.129 netmask 255.255.255.255
Global (outside) 11 12.69.103.130 netmask 255.255.255.255
Global (outside) 12 12.69.103.131 netmask 255.255.255.255
Global (outside) 13 12.69.103.132 netmask 255.255.255.255
Global (outside) 14 12.69.103.133 netmask 255.0.0.0
NAT (inside) 0 access-list sheep
NAT (inside) 11 192.168.255.4 255.255.255.252
NAT (inside) 12 192.168.255.8 255.255.255.252
NAT (inside) 13 192.168.255.12 255.255.255.252
NAT (inside) 10 10.10.0.0 255.255.0.0
NAT (inside) 11 10.11.0.0 255.255.0.0
NAT (inside) 12 10.12.0.0 255.255.0.0
NAT (inside) 13 10.13.0.0 255.255.0.0
NAT (inside) 10 10.14.0.0 255.255.0.0
NAT (outside) 0-list of access outside_nat0_outbound
NAT (outside) 10 10.16.0.0 255.255.255.0
NAT (outside) 10 10.14.0.0 255.255.0.0
NAT (outside) 10 10.15.0.0 255.255.0.0
NAT (outside) 10 10.16.0.0 255.255.0.0
static (DMZ1-VLAN900, external) 12.69.103.0 12.69.103.0 subnet mask 255.255.255.192
public static 12.69.103.154 (Interior, exterior) 10.10.2.41 netmask 255.255.255.255
static (inside, DMZ1-VLAN900) 10.0.0.0 10.0.0.0 netmask 255.0.0.0
static (inside, DMZ1-VLAN900) 192.168.0.0 192.168.0.0 netmask 255.255.0.0
static (inside, DMZ1-VLAN900) 172.16.0.0 subnet 255.240.0.0 172.16.0.0 mask
public static 12.69.103.147 (Interior, exterior) 10.10.2.10 netmask 255.255.255.255
public static 12.69.103.152 (Interior, exterior) 10.10.8.5 netmask 255.255.255.255
public static 12.69.103.155 (Interior, exterior) 10.10.2.110 netmask 255.255.255.255
outside access-group in external interface
Access-group DMZ1_in in interface DMZ1-VLAN900
!
Router eigrp 100
Network 10.0.0.0 255.0.0.0
!
Route outside 0.0.0.0 0.0.0.0 12.69.103.225 1
Route inside 10.0.0.0 255.0.0.0 10.10.200.30 1
Route inside 10.10.98.0 255.255.255.0 10.10.200.30 1
Route outside 10.14.0.0 255.255.0.0 12.69.103.225 1
Route outside 10.15.0.0 255.255.0.0 12.69.103.225 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout, uauth 0:05:00 absolute
dynamic-access-policy-registration DfltAccessPolicy
AAA-server Microsoft radius Protocol
simultaneous accounting mode
reactivation mode impoverishment deadtime 30
AAA-server Microsoft host 10.10.2.1
key cisco123
the ssh LOCAL console AAA authentication
AAA authentication LOCAL telnet console
AAA authentication enable LOCAL console
AAA authentication http LOCAL console
Enable http server
http 10.10.0.0 255.255.0.0 management
http 10.10.0.0 255.255.0.0 inside
SNMP-server host within the 10.10.2.41 community UNISNMP version 2 c-port udp 161
location of Server SNMP STODATDROOM
contact SNMP SYS Admin Server
UNISNMP SNMP-server community
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Server enable SNMP traps syslog
Server SNMP traps enable ipsec works stop
Server enable SNMP traps entity config - change insert-fru fru - remove
Server SNMP enable doors remote access has exceeded the threshold of session
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto outside_map 1 match address outside_cryptomap
peer set card crypto outside_map 1 115.111.107.226
card crypto outside_map 1 set of transformation-ESP-3DES-SHA
card crypto outside_map 2 match address outside_cryptomap_1
peer set card crypto outside_map 2 116.12.211.66
card crypto outside_map 2 the value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
address card crypto outside_map 10 game traffic
peer set card crypto outside_map 10 212.185.51.242
outside_map crypto 10 card value transform-set ESP-3DES-SHA
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
inside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
inside crypto map inside_map interface
card crypto DMZ1-VLAN900_map0 1 the value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
crypto isakmp identity address
crypto ISAKMP allow inside
crypto ISAKMP allow outside
crypto ISAKMP policy 5
preshared authentication
3des encryption
sha hash
Group 2
life no
crypto ISAKMP policy 10
preshared authentication
the Encryption
sha hash
Group 2
life no
Crypto isakmp nat-traversal 33
No vpn-addr-assign aaa
No dhcp vpn-addr-assign
VPN-addr-assign local reuse-delay 10
Telnet 10.10.0.0 255.255.0.0 inside
Telnet 10.10.0.0 255.255.0.0 management
Telnet timeout 29
SSH timeout 29
SSH version 2
Console timeout 1
management-access inside
dhcprelay Server 10.10.2.1 outside
a basic threat threat detection
threat scan-threat shun except ip 10.14.0.0 address detection 255.255.0.0
threat scan-threat shun except ip 10.15.0.0 address detection 255.255.0.0
threat detection statistics
Web cache WCCP
WCCP interface within web in cache redirection
NTP 192.5.41.41 Server
NTP 192.5.41.40 Server
Server NTP 192.43.244.18
TFTP server inside 10.10.2.2 \asa
attributes of Group Policy DfltGrpPolicy
banner of value WARNING: this system is for the use of only authorized customers.
value of server WINS 10.10.2.1
value of 10.10.2.1 DNS server 10.10.2.2
Protocol-tunnel-VPN IPSec svc webvpn
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value VPN-SplitTunnel
universalsilencer.com value by default-field
Server proxy Internet Explorer 00.00.00.00 value
the address value Clients_vpn pools
internal CHINAPH group policy
CHINAPH group policy attributes
Protocol-tunnel-VPN IPSec svc webvpn
Split-tunnel-policy tunnelall
enable dhcp Intercept 255.255.0.0
the address value Clients_vpn pools
internal ezGROUP1 group policy
attributes of the strategy of group ezGROUP1
VPN-tunnel-Protocol svc webvpn
allow password-storage
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list ezvpn1
allow to NEM
deleted users
IPSec-attributes tunnel-group DefaultL2LGroup
pre-shared-key germanysilence
type tunnel-group USISplitTunnelRemoteAccess remote access
attributes global-tunnel-group USISplitTunnelRemoteAccess
address pool Clients_vpn
IPSec-attributes tunnel-group USISplitTunnelRemoteAccess
pre-shared-key z2LNoioYVCTyJlX
type tunnel-group USISplitTunnelRADIUS remote access
attributes global-tunnel-group USISplitTunnelRADIUS
address pool Clients_vpn
Group-Microsoft LOCAL authentication server
IPSec-attributes tunnel-group USISplitTunnelRADIUS
pre-shared-key fLFO2p5KSS8Ic2y
type tunnel-group ezVPN1 remote access
tunnel-group ezVPN1 General-attributes
Group Policy - by default-ezGROUP1
ezVPN1 group of tunnel ipsec-attributes
pre-shared key, PSK
tunnel-group 212.185.51.242 type ipsec-l2l
IPSec-attributes tunnel-group 212.185.51.242
pre-shared key, PSK
NOCHECK Peer-id-validate
tunnel-group 115.111.107.226 type ipsec-l2l
IPSec-attributes tunnel-group 115.111.107.226
pre-shared key PSJ
tunnel-Group China type remote access
attributes global-tunnel-Group China
address pool Clients_vpn
Group Policy - by default-CHINAPH
tunnel-group 116.12.211.66 type ipsec-l2l
IPSec-attributes tunnel-group 116.12.211.66
pre-shared key, PSK
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns migrated_dns_map_1
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the migrated_dns_map_1 dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:834976612f8f76e1b088326516362975
: end
Hello Ronald.
You use PFS on a site and not on the other.
Allows to remove from the site that has it and give it a try.
Change this:
card crypto outside_map 1 match address outside_1_cryptomap
card crypto outside_map 1 set pfs
peer set card crypto outside_map 1 12.69.103.226
card crypto outside_map 1 set of transformation-ESP-3DES-SHA
outside_map interface card crypto outside
To do this:
card crypto outside_map 1 match address outside_1_cryptomap
peer set card crypto outside_map 1 12.69.103.226
card crypto outside_map 1 set of transformation-ESP-3DES-SHA
outside_map interface card crypto outside
So just do a
NO card crypto outside_map 1 set pfs
Kind regards
Julio
Note all useful posts
Tags: Cisco Security
Similar Questions
-
I get the error "ERROR: access-list used in static has different local addresses.
When I enter a static NAT strategy
(config) # static (inside, outside) 10.200.201.10 access list PUB - NAT
Here's the ACL is used for this
IP 10.200.201.0 allow Access - list extended PUB - NAT 255.255.255.0 10.101.211.0 255.255.255.0
IP 10.200.201.0 allow Access - list extended PUB - NAT 255.255.255.0 10.101.202.0 255.255.255.0
IP 10.200.210.0 allow Access - list extended PUB - NAT 255.255.255.0 10.101.211.0 255.255.255.0
IP 10.200.212.0 allow Access - list extended PUB - NAT 255.255.255.0 10.101.211.0 255.255.255.0It is to allow voice in front of a central site traffic with a PUB/SUB (10.200.201.x/10.200.202.x) to a remote site with a SUB (net 10.101.202.x). Phones are on 10.200.210.x/10.200.212.x (central site) and remote phones are on net 10.101.211.x. The ipsec tunnel is up. How can I get this working again, at the same time, it has worked... Thank you.
NAT (inside) - 0 access list<>
Sent by Cisco Support technique iPad App
-
Troubleshooting IPSec Site to Site VPN between ASA and 1841
Hi all
in the past I've implemented several VPN connections between the devices of the SAA. So I thought a site link between an ASA site and 1841 would be easier... But it seems I was mistaken.
I configured a VPN Site to Site, as it has been described in the Document ID: SDM 110198: IPsec Site to Site VPN between ASA/PIX and an example of IOS Router Configuration (I have not used SDM but CCP).
I have run the wizards on the ASA with ASDM and the current IOS version 15.1 1841, with CCP.
It seems to Phase 1 and 2 are coming although my ASA in ADSM reports (monitoring > VPN > VPN statistics > Sessions) a tunnel established with some of the Tx traffic but 0 Rx traffic),
On the ASA:
Output of the command: "sh crypto ipsec its peer 217.xx.yy.zz.
address of the peers: 217.86.154.120
Crypto map tag: VPN-OUTSIDE, seq num: 2, local addr: 62.aa.bb.ccaccess extensive list ip 192.168.37.0 outside_2_cryptomap_1 allow 255.255.255.0 172.20.2.0 255.255.255.0
local ident (addr, mask, prot, port): (LAN-A/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (LAN-G/255.255.255.0/0/0)
current_peer: 217.xx.yy.zz#pkts program: 400, #pkts encrypt: 400, #pkts digest: 400
#pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 400, comp #pkts failed: 0, #pkts Dang failed: 0
success #frag before: 0, failures before #frag: 0, #fragments created: 0
Sent #PMTUs: 0, #PMTUs rcvd: 0, reassembly: 20th century / of frgs #decapsulated: 0
#send errors: 0, #recv errors: 0local crypto endpt. : 62.aa.bb.cc, remote Start crypto. : 217.xx.yy.zz
Path mtu 1500, fresh ipsec generals 58, media, mtu 1500
current outbound SPI: 39135054
current inbound SPI: B2E9E500SAS of the esp on arrival:
SPI: 0xB2E9E500 (3001672960)
transform: esp-3des esp-sha-hmac no compression
running parameters = {L2L, Tunnel, PFS 2 group}
slot: 0, id_conn: 100327424, crypto-map: VPN-OUTSIDE
calendar of his: service life remaining (KB/s) key: (4374000/1598)
Size IV: 8 bytes
support for replay detection: Y
Anti-replay bitmap:
0x00000000 0x00000001
outgoing esp sas:
SPI: 0 x 39135054 (957567060)
transform: esp-3des esp-sha-hmac no compression
running parameters = {L2L, Tunnel, PFS 2 group}
slot: 0, id_conn: 100327424, crypto-map: VPN-OUTSIDE
calendar of his: service life remaining (KB/s) key: (4373976/1598)
Size IV: 8 bytes
support for replay detection: Y
Anti-replay bitmap:
0x00000000 0x00000001Output of the command: "sh crypto isakmp his."
HIS active: 4
Generate a new key SA: 0 (a tunnel report Active 1 and 1 to generate a new key during the generate a new key)
Total SA IKE: 4IKE Peer: 217.xx.yy.zz
Type: L2L role: initiator
Generate a new key: no State: MM_ACTIVEOn the 1841
1841 crypto isakmp #sh its
IPv4 Crypto ISAKMP Security Association
DST CBC conn-State id
217.86.154.120 62.153.156.163 QM_IDLE 1002 ACTIVE1841 crypto ipsec #sh its
Interface: Dialer1
Tag crypto map: SDM_CMAP_1, local addr 217.86.154.120protégé of the vrf: (none)
local ident (addr, mask, prot, port): (172.20.2.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (192.168.37.0/255.255.255.0/0/0)
current_peer 62.153.156.163 port 500
LICENCE, flags is {origin_is_acl},
#pkts program: encrypt 0, #pkts: 0, #pkts digest: 0
#pkts decaps: 585, #pkts decrypt: 585, #pkts check: 585
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, #pkts compr. has failed: 0
#pkts not unpacked: 0, #pkts decompress failed: 0
Errors #send 0, #recv 0 errorslocal crypto endpt. : 217.86.154.120, remote Start crypto. : 62.153.156.163
Path mtu 1452, ip mtu 1452, ip mtu BID Dialer1
current outbound SPI: 0xB2E9E500 (3001672960)
PFS (Y/N): Y, Diffie-Hellman group: group2SAS of the esp on arrival:
SPI: 0 x 39135054 (957567060)
transform: esp-3des esp-sha-hmac.
running parameters = {Tunnel}
Conn ID: 2003, flow_id: FPGA:3, sibling_flags 80000046, card crypto: SDM_CMAP_1
calendar of his: service life remaining (k/s) key: (4505068/1306)
Size IV: 8 bytes
support for replay detection: Y
Status: ACTIVEthe arrival ah sas:
SAS of the CFP on arrival:
outgoing esp sas:
SPI: 0xB2E9E500 (3001672960)
transform: esp-3des esp-sha-hmac.
running parameters = {Tunnel}
Conn ID: 2004, flow_id: FPGA:4, sibling_flags 80000046, card crypto: SDM_CMAP_1
calendar of his: service life remaining (k/s) key: (4505118/1306)
Size IV: 8 bytes
support for replay detection: Y
Status: ACTIVEoutgoing ah sas:
outgoing CFP sas:
Interface: virtual Network1
Tag crypto map: SDM_CMAP_1, local addr 217.86.154.120protégé of the vrf: (none)
local ident (addr, mask, prot, port): (172.20.2.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (192.168.37.0/255.255.255.0/0/0)
current_peer 62.153.156.163 port 500
LICENCE, flags is {origin_is_acl},
#pkts program: encrypt 0, #pkts: 0, #pkts digest: 0
#pkts decaps: 585, #pkts decrypt: 585, #pkts check: 585
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, #pkts compr. has failed: 0
#pkts not unpacked: 0, #pkts decompress failed: 0
Errors #send 0, #recv 0 errorslocal crypto endpt. : 217.86.154.120, remote Start crypto. : 62.153.156.163
Path mtu 1452, ip mtu 1452, ip mtu BID Dialer1
current outbound SPI: 0xB2E9E500 (3001672960)
PFS (Y/N): Y, Diffie-Hellman group: group2SAS of the esp on arrival:
SPI: 0 x 39135054 (957567060)
transform: esp-3des esp-sha-hmac.
running parameters = {Tunnel}
Conn ID: 2003, flow_id: FPGA:3, sibling_flags 80000046, card crypto: SDM_CMAP_1
calendar of his: service life remaining (k/s) key: (4505068/1306)
Size IV: 8 bytes
support for replay detection: Y
Status: ACTIVEthe arrival ah sas:
SAS of the CFP on arrival:
outgoing esp sas:
SPI: 0xB2E9E500 (3001672960)
transform: esp-3des esp-sha-hmac.
running parameters = {Tunnel}
Conn ID: 2004, flow_id: FPGA:4, sibling_flags 80000046, card crypto: SDM_CMAP_1
calendar of his: service life remaining (k/s) key: (4505118/1306)
Size IV: 8 bytes
support for replay detection: Y
Status: ACTIVEoutgoing ah sas:
outgoing CFP sas:
It seems that the routing on the 1841 is working properly as I can tear down the tunnel and relaunch in scathing a host on the network of 1841, but not vice versa.
Trounleshoot VPN of the 1841 report shows a message like "the following sources are forwarded through the interface card crypto. (172.20.2.0 1) go to "Configure-> routing" and correct the routing table.
I have not found an error on the 1841 config so if one of the guys reading this thread has an idea I appreciate highly suspicion!
It's the running of the 1841 configuration
!
version 15.1
horodateurs service debug datetime msec
Log service timestamps datetime msec
encryption password service
!
host name 1841
!
boot-start-marker
start the system flash c1841-adventerprisek9 - mz.151 - 1.T.bin
boot-end-marker
!
logging buffered 51200 notifications
!
AAA new-model
!
!
AAA authentication login default local
!
AAA - the id of the joint session
!
iomem 20 memory size
clock timezone PCTime 1
PCTime of summer time clock day March 30, 2003 02:00 October 26, 2003 03:00
dot11 syslog
IP source-route
!
No dhcp use connected vrf ip
!
IP cef
no ip bootp Server
IP domain name test
name of the IP-server 194.25.2.129
name of the IP-server 194.25.2.130
name of the IP-server 194.25.2.131
name of the IP-server 194.25.2.132
name of the IP-server 194.25.2.133
No ipv6 cef
!
Authenticated MultiLink bundle-name Panel
!
!
object-group network phone
VoIP phone description
Home 172.20.2.50
Home 172.20.2.51
!
redundancy
!
!
controller LAN 0/0/0
atm mode
Annex symmetrical shdsl DSL-mode B
!
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
isakmp encryption key * address 62.aa.bb.cc
!
!
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
!
map SDM_CMAP_1 1 ipsec-isakmp crypto
Description Tunnel to62.aa.bb.cc
the value of 62.aa.bb.cc peer
game of transformation-ESP-3DES-SHA
PFS group2 Set
match address 100
!
!
!
interface FastEthernet0/0
DMZ description $ FW_OUTSIDE$
10.10.10.254 IP address 255.255.255.0
IP nat inside
IP virtual-reassembly
automatic duplex
automatic speed
!
interface FastEthernet0/1
Description $ETH - LAN$ $FW_INSIDE$
IP 172.20.2.254 255.255.255.0
IP access-group 100 to
IP nat inside
IP virtual-reassembly
IP tcp adjust-mss 1412
automatic duplex
automatic speed
!
ATM0/0/0 interface
no ip address
No atm ilmi-keepalive
!
point-to-point interface ATM0/0/0.1
PVC 1/32
PPPoE-client dial-pool-number 1
!
!
interface Dialer1
Description $FW_OUTSIDE$
the negotiated IP address
IP mtu 1452
NAT outside IP
IP virtual-reassembly
encapsulation ppp
Dialer pool 1
Dialer-Group 2
PPP authentication chap callin pap
PPP chap hostname xxxxxxx
PPP chap password 7 xxxxxxx8
PPP pap sent-name of user password xxxxxxx xxxxxxx 7
map SDM_CMAP_1 crypto
!
IP forward-Protocol ND
IP http server
local IP http authentication
IP http secure server
!
!
The dns server IP
IP nat inside source static tcp 10.10.10.1 808 interface Dialer1 80
IP nat inside source static tcp 10.10.10.1 25 25 Dialer1 interface
IP nat inside source overload map route SDM_RMAP_1 interface Dialer1
IP nat inside source overload map route SDM_RMAP_2 interface Dialer1
IP route 0.0.0.0 0.0.0.0 Dialer1 permanent
!
logging trap notifications
Note category of access list 1 = 2 CCP_ACL
access-list 1 permit 172.20.2.0 0.0.0.255
Note access-list category 2 CCP_ACL = 2
access-list 2 allow 10.10.10.0 0.0.0.255
Note access-list 100 category CCP_ACL = 4
Note access-list 100 IPSec rule
access-list 100 permit ip 172.20.2.0 0.0.0.255 192.168.37.0 0.0.0.255
Note CCP_ACL the access list 101 = 2 category
Note access-list 101 IPSec rule
access-list 101 deny ip 172.20.2.0 0.0.0.255 192.168.37.0 0.0.0.255
access-list 101 permit ip 172.20.2.0 0.0.0.255 any
Note access-list 102 CCP_ACL category = 2
Note access-list 102 IPSec rule
access-list 102 deny ip 172.20.2.0 0.0.0.255 192.168.37.0 0.0.0.255
access-list 102 permit ip 10.10.10.0 0.0.0.255 any
!!
allowed SDM_RMAP_1 1 route map
corresponds to the IP 101
!
allowed SDM_RMAP_2 1 route map
corresponds to the IP 102
!
!
control plan
!
!
Line con 0
line to 0
line vty 0 4
length 0
transport input telnet ssh
!
Scheduler allocate 20000 1000
NTP-Calendar Update
NTP 172.20.2.250 Server prefer
endAs I mentioned previously: suspicion is much appreciated!
Best regards
Joerg
Joerg,
ASA receives not all VPN packages because IOS does not send anything.
Try to send packets to the 1841 LAN to LAN of the ASA and see is the "sh cry ips its" on the 1841 increments the encrypted packets (there not)
The problem seems so on the side of the router.
I think that is a routing problem, but you only have one default gateway (no other channels on the router).
The ACL 100 is set to encrypt the traffic between the two subnets.
It seems that the ACL 101 is also bypassing NAT for VPN traffic.
Follow these steps:
Try running traffic of LAN router inside IP (source of ping 192.168.37.x 172.20.2.254) and see if the packages are not through the translation and obtaining encrypted.
I would also like to delete 100 ACL from the inside interface on the router because it is used for the VPN. You can create an another ACL to apply to the interface.
Federico.
-
Site to site VPN works only on Cisco 881
I have 2 problems with a cisco 881. The first problem is that Vlan2 (192.168.5.xx) cannot access the internet on the outside. But I know that the router has internet, because I can ping the external ip address. The 2nd problem is that I have a set of site to another upward, but when I test the Site to site I get this error:
destination of traffic of the tunnel must be channelled through the crypto map interface. The destination following (s) doesn't have a routing entry in the routing table
192.168.2.0I copied the config form this router from another cisco 881 work, where everything works. The only difference is that this router needs a site to site vpn connection.
My question is how I can get internet on vlan2 and who can I solve the connection to site to site.
Here's the running configuration:
Building configuration...
Current configuration: 12698 bytes
!
version 15.3
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
hostname Cisco_881
!
boot-start-marker
boot-end-marker
!
AQM-registry-fnf
!
logging buffered 51200 warnings
!
AAA new-model
!
!
AAA authentication login default local
AAA authorization exec default local
AAA authorization network default local
!
!
!
!
!
AAA - the id of the joint session
!
Crypto pki trustpoint TP-self-signed-1151531093
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 1151531093
revocation checking no
rsakeypair TP-self-signed-1151531093
!
Crypto pki trustpoint TP-self-signed-2011286623
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 2011286623
revocation checking no
rsakeypair TP-self-signed-2011286623
!
!
TP-self-signed-1151531093 crypto pki certificate chain
certificate self-signed 01
3082022B 30820194 02020101 300 D 0609 2A 864886 F70D0101 05050030 A0030201
2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30
69666963 31313531 35333130 6174652D 3933301E 170 3135 30343031 31363230
34315A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D
4F532D53 5369676E 656C662D 43 65727469 66696361 74652 31 31353135 65642D
33313039 3330819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101
8100AC6E E7FA8AFD 9D4E206C 2B23DFC1 990AFDB3 98CD84A7 37697253 A7EF2520
0C45190E 298B6E9F E2711580 80DCFBFB 05A6A0BA 347B960B D9DA17FC B1543B9D
FBC048F3 063EBBC5 02391432 F0232A73 EAC7278E 8CB83005 D13A1D47 BEF18198
A 547469, 2 F65ED0E6 249BF517 1E74117D C94BE542 46EE487D A3843F12 364639B 4
0B 090203 010001 HAS 3 53305130 1 130101 FF040530 030101FF 301F0603 0F060355
551 2304 18301680 147996F4 3E6D0EE2 2D9065BB D726137C 2DF42ABE 01301D 06
03551D0E 04160414 7996F43E 6D0EE22D 9065BBD7 26137C2D F42ABE01 300 D 0609
2A 864886 F70D0101 8181002A 05050003 677B9BE6 CB60D188 73227C4B 2DC33101
BD448017 EDEF0296 FF7438A3 4C46519B 144C775F 1429CF06 7DB29F2D EB16EE75
22100B 63 0D75511A 98DC57DC EF87BED2 1C1635C8 B5352706 3963037A 4E9B739A
3A1EC9BE 8431BD70 116D3B31 E4A2AC4C 0F934B3F 196AF829 AD537005 6935B 451
EB31DB3F A9BA6D70 65B70D19 D00158
quit smoking
TP-self-signed-2011286623 crypto pki certificate chain
no ip source route
!
!
!
!!
DHCP excluded-address IP 10.10.10.1
DHCP excluded-address IP 192.168.5.1 192.168.5.49
DHCP excluded-address IP 192.168.5.150 192.168.5.254
!
DHCP IP CCP-pool
import all
Network 10.10.10.0 255.255.255.248
default router 10.10.10.1
Rental 2 0
!
IP dhcp Internet pool
network 192.168.5.0 255.255.255.0
router by default - 192.168.5.254
DNS-Server 64.59.135.133 64.59.128.120
lease 6 0
!
!
!
no ip domain search
"yourdomain.com" of the IP domain name
name of the IP-Server 64.59.135.133
name of the IP-Server 64.59.128.120
IP cef
No ipv6 cef
!
!
!
!
!
Authenticated MultiLink bundle-name Panel
!
!
!
!
!
!
!
udi pid C881-K9 sn FTX18438503 standard license
!
!
Archives
The config log
hidekeys
username * privilege 15 secret 5 $1$IBY.$X5/iqYy47a5vAWWuG4/Oa/
username * secret 5 $1$ 17 ST$ QzJMvQnZ9Q.1y7u0rYXFa0
username * secret 5 $1$ L4W9$ zBKpawZ3i5nXxwyS9H6Lf1
!
!
!
!
!
no passive ftp ip
!
!
crypto ISAKMP policy 1
BA aes 256
preshared authentication
Group 2
!
crypto ISAKMP policy 2
BA 3des
preshared authentication
Group 2
isakmp encryption key * address 208.98.212.xx
!
Configuration group crypto isakmp MPE client
key *.
pool VPN_IP_POOL
ACL 100
include-local-lan
10 Max-users
netmask 255.255.255.0
banner ^ practive entered the fieldThis area is reserved for administrators of control systems.
If you are here by mistake, please disconnect immediately.
You have full access to 192.168.125.0 / 0.0.0.255
Support on continue to start your session. ^ C
!
Configuration group customer crypto isakmp PALL
key *.
pool VPN_IP_POOL_PALL
ACL 101
include-local-lan
Max - 1 users
netmask 255.255.255.0
banner ^ practive entered the fieldThis area is limited to the PALL access only.
If you are here by mistake, please disconnect immediately.
You have full access to 192.168.125.0 / 0.0.0.255
Support on continue to start your session. ^ C
ISAKMP crypto profile vpn_isakmp_profile
game of identity EMT group
client authentication list default
Default ISAKMP authorization list
client configuration address respond
virtual-model 1
ISAKMP crypto profile vpn_isakmp_profile_2
match of group identity PALL
client authentication list default
Default ISAKMP authorization list
client configuration address respond
virtual-model 2
!
!
Crypto ipsec transform-set esp - aes 256 esp-sha-hmac VPN_TRANSFORM
tunnel mode
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
tunnel mode
!
Profile of crypto ipsec VPN_PROFILE_MPE
Set the security association idle time 3600
game of transformation-VPN_TRANSFORM
vpn_isakmp_profile Set isakmp-profile
!
Profile of crypto ipsec VPN_PROFILE_PALL
Set the security association idle time 1800
game of transformation-VPN_TRANSFORM
vpn_isakmp_profile_2 Set isakmp-profile
!
!
!
map SDM_CMAP_1 1 ipsec-isakmp crypto
Description Tunnel to208.98.212.xx
the value of 208.98.212.xx peer
game of transformation-ESP-3DES-SHA
match address 102
!
!
!
!
!
!
interface Loopback0
IP 192.168.40.254 255.255.255.0
!
interface FastEthernet0
no ip address
!
interface FastEthernet1
no ip address
!
interface FastEthernet2
switchport access vlan 2
no ip address
!
interface FastEthernet3
switchport access vlan 2
no ip address
!
interface FastEthernet4
IP address 208.98.213.xx 255.255.255.224
IP access-group 111 to
NAT outside IP
IP virtual-reassembly in
automatic duplex
automatic speed
map SDM_CMAP_1 crypto
!
type of interface virtual-Template1 tunnel
IP unnumbered Loopback0
ipv4 ipsec tunnel mode
Tunnel VPN_PROFILE_MPE ipsec protection profile
!
tunnel type of interface virtual-Template2
IP unnumbered Loopback0
ipv4 ipsec tunnel mode
Tunnel VPN_PROFILE_PALL ipsec protection profile
!
interface Vlan1
Description of control network
IP 192.168.125.254 255.255.255.0
IP access-group CONTROL_IN in
IP access-group out CONTROL_OUT
IP nat inside
IP virtual-reassembly in
IP tcp adjust-mss 1452
!
interface Vlan2
Description Internet network
IP 192.168.5.254 255.255.255.0
IP access-group INTERNET_IN in
IP access-group out INTERNET_OUT
IP nat inside
IP virtual-reassembly in
!
local IP VPN_IP_POOL 192.168.40.100 pool 192.168.40.150
local IP VPN_IP_POOL_PALL 192.168.40.151 pool 192.168.40.152
IP forward-Protocol ND
IP http server
23 class IP http access
local IP http authentication
IP http secure server
IP http timeout policy slowed down 60 life 86400 request 10000
!
!
IP nat inside source static tcp 192.168.125.2 25000 25000 FastEthernet4 interface
IP nat inside source overload map route SDM_RMAP_1 interface FastEthernet4
IP route 0.0.0.0 0.0.0.0 FastEthernet4 permanent 208.98.236.xx
!
CONTROL_IN extended IP access list
Note the access control
Note the category CCP_ACL = 17
allow any host 192.168.125.254 eq non500-isakmp udp
allow any host 192.168.125.254 eq isakmp udp
allow any host 192.168.125.254 esp
allow any host 192.168.125.254 ahp
IP 192.168.125.0 allow 0.0.0.255 192.168.125.0 0.0.0.255
Note the VPN access
IP 192.168.125.0 allow 0.0.0.255 192.168.40.0 0.0.0.255
Note Access VNC
permit tcp host 192.168.125.2 eq 25000 one
Comment by e-mail to WIN911
permit tcp host 192.168.125.2 any eq smtp
Note DNS traffic
permit udp host 192.168.125.2 host 64.59.135.133 eq field
permit udp host 192.168.125.2 host 64.59.128.120 eq field
Note Everything Else block
refuse an entire ip
CONTROL_OUT extended IP access list
Note the access control
IP 192.168.125.0 allow 0.0.0.255 192.168.125.0 0.0.0.255
Note the VPN access
ip permit 192.168.40.0 0.0.0.255 192.168.125.0 0.0.0.255
Note Access VNC
allow any host 192.168.125.2 eq 25000 tcp
Comment by e-mail to WIN911
allow any host 192.168.125.2 eq smtp tcp
Note DNS responses
allowed from any host domain eq 192.168.125.2 udp
Note deny all other traffic
refuse an entire ip
INTERNET_IN extended IP access list
Note Access VNC on VLAN
allow any host 192.168.125.2 eq 25000 tcp
Note block all other controls and VPN
deny ip any 192.168.125.0 0.0.0.255
deny ip any 192.168.40.0 0.0.0.255
Note leave all other traffic
allow an ip
INTERNET_OUT extended IP access list
Note a complete outbound Internet access
allow an ip
WAN_IN extended IP access list
allow an ip host 207.229.14.xx
Note PERMIT ESTABLISHED TCP connections
allow any tcp smtp created everything eq
Note ALLOW of DOMAIN CONNECTIONS
permit udp host 64.59.135.133 eq field all
permit udp host 64.59.128.120 eq field all
Note ALLOW ICMP WARNING RETURNS
allow all all unreachable icmp
permit any any icmp parameter problem
allow icmp all a package-too-big
allow a whole icmp administratively prohibited
permit icmp any any source-quench
allow icmp all once exceed
refuse a whole icmp
allow an ip
!
auto discovering IP sla
not run cdp
!
allowed SDM_RMAP_1 1 route map
corresponds to the IP 103
!
access-list 1 remark out to WAN routing
Note CCP_ACL the access list 1 = 16 category
access-list 1 permit 192.168.125.2
access-list 1 permit 192.168.5.0 0.0.0.255
Note access-list 23 SSH and HTTP access permissions
access-list 23 permit 192.168.125.0 0.0.0.255
access-list 23 permit 192.168.40.0 0.0.0.255
access-list 23 allow one
Note access-list 100 VPN traffic
access-list 100 permit ip 192.168.125.0 0.0.0.255 any
access-list 100 permit ip 192.168.40.0 0.0.0.255 any
Note access-list 101 for PALL VPN traffic
access-list 101 permit ip 192.168.125.0 0.0.0.255 any
Note access-list 102 CCP_ACL category = 4
Note access-list 102 IPSec rule
access-list 102 permit ip 192.168.5.0 0.0.0.255 192.168.2.0 0.0.1.255
Note access-list 103 CCP_ACL category = 2
Note access-list 103 IPSec rule
access-list 103 deny ip 192.168.5.0 0.0.0.255 192.168.2.0 0.0.1.255
access-list 103 allow ip 192.168.5.0 0.0.0.255 any
access-list 103 allow the host ip 192.168.125.2 all
Note access-list 111 CCP_ACL category = 17
access-list 111 permit udp any host 208.98.213.xx eq non500-isakmp
access-list 111 permit udp any host 208.98.213.xx eq isakmp
access-list 111 allow esp any host 208.98.213.xx
access-list 111 allow ahp any host 208.98.213.xx
Note access-list 111 IPSec rule
access-list 111 permit ip 192.168.2.0 0.0.1.255 192.168.5.0 0.0.0.255
Note access-list 111 IPSec rule
access-list 111 permit ip 192.168.2.0 0.0.1.255 192.168.4.0 0.0.1.255
access-list 111 permit udp host 208.98.212.xx host 208.98.213.xx eq non500-isakmp
access-list 111 permit udp host 208.92.12.xx host 208.92.13.xx eq isakmp
access-list 111 allow esp host 208.92.12.xx host 208.92.13.xx
access-list 111 allow ahp host 208.92.12.xx host 208.92.13.xx
access-list 111 permit icmp any host 208.92.13.xx
access-list 111 permit tcp any host 208.92.13.xx eq 25000
access-list 111 permit tcp any host 208.92.13.xx eq 22
access-list 111 permit tcp any host 208.92.13.xx eq telnet
access-list 111 permit tcp any host 208.92.13.xx eq www
!
!
!
control plan
!
!
!
MGCP behavior considered range tgcp only
MGCP comedia-role behavior no
disable the behavior MGCP comedia-check-media-src
disable the behavior of MGCP comedia-sdp-force
!
profile MGCP default
!
!
!
!
exec banner ^ C
% Warning of password expiration.
-----------------------------------------------------------------------Unplug IMMEDIATELY if you are not an authorized user
^ C
!
Line con 0
no activation of the modem
line to 0
line vty 0 4
access-class 23 in
password *.
transport input telnet ssh
transportation out all
line vty 5 15
access-class 160 in
password *.
transport of entry all
transportation out all
!
max-task-time 5000 Planner
Scheduler allocate 20000 1000
!
endThank you.
It seems that DNS has failed, because it is indeed happened to internet, but it does not work when internet DNS resolution.
Go ahead and try to ping this 157.166.226.25, and it's on the browser http://157.166.226.25/, CNN.com. Let's try those. Also just in case where to configure a DNS SERVER on your router.
- http://www.cisco.com/c/en/us/support/docs/ip/domain-name-system-dns/2418...
Disable any ZBF just in case.
David Castro,
Kind regards
-
fall of site to site vpn icmp packets
Hello
I test site to site vpn between ASA and cisco router with GNS3, topology is base the tunnel is up but the question when the remote host ping from both sides it is drops icmp, see router command and ASA do not include droppings. Here is a sample output from ping when I try to remote client ping. any help is appreciated :)
Instant topology is attached, also configs
Thank you
84 bytes from 10.20.20.5 icmp_seq = 59 ttl = 63 times = 79,004 ms
10.20.20.5 icmp_seq = timeout 60
84 bytes from 10.20.20.5 icmp_seq = 61 = ttl 63 times = 70,004 ms
10.20.20.5 icmp_seq = timeout 62
84 bytes from 10.20.20.5 icmp_seq = ttl 63 time = 63 = 59,004 ms
10.20.20.5 icmp_seq = 64 timeout
84 bytes from 10.20.20.5 icmp_seq = 65 = ttl 63 times = 50,003 ms
10.20.20.5 icmp_seq = timeout 66
84 bytes from 10.20.20.5 icmp_seq = 67 ttl = 63 times = 59,003 ms
10.20.20.5 icmp_seq = timeout 68
84 bytes from 10.20.20.5 icmp_seq = 69 = ttl 63 times = 50,003 ms
10.20.20.5 icmp_seq = timeout 70
84 bytes from 10.20.20.5 icmp_seq = 71 ttl = 63 times = 58,003 ms
10.20.20.5 icmp_seq = timeout 72
84 bytes from 10.20.20.5 icmp_seq = 73 = ttl 63 times = 50,003 ms
10.20.20.5 icmp_seq = timeout 74
84 bytes from 10.20.20.5 icmp_seq = 75 ttl = 63 times = 69,004 ms
10.20.20.5 icmp_seq = timeout 76
84 bytes from 10.20.20.5 icmp_seq = 77 ttl = 63 times = 237,013 ms
10.20.20.5 icmp_seq = timeout 78R1 ipsec crypto #sh her
Interface: FastEthernet0/0
Tag crypto map: map, local addr 100.100.100.2protégé of the vrf: (none)
local ident (addr, mask, prot, port): (10.20.20.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (10.20.10.0/255.255.255.0/0/0)
current_peer 100.100.100.1 port 500
LICENCE, flags is {origin_is_acl},
#pkts program: 14, #pkts encrypt: 14, #pkts digest: 14
decaps #pkts: 28, #pkts decrypt: 28, #pkts check: 28
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, #pkts compr. has failed: 0
#pkts not unpacked: 0, #pkts decompress failed: 0
Errors #send 0, #recv 0 errorsciscoasa # sh crypto isakmp stats
Global statistics IKEv1
The active Tunnels: 1
Previous Tunnels: 1
In bytes: 1384
In the packages: 12
In packs of fall: 0
In Notifys: 8
In the constituencies of P2: 0
In P2 invalid Exchange: 0
In P2 Exchange rejects: 0
Requests for removal in his P2: 0
Bytes: 1576
Packet: 13
Fall packages: 0
NOTIFYs out: 16
Exchanges of P2: 1
The Invalides Exchange P2: 0
Exchange of P2 rejects: 0
Requests to remove on P2 Sa: 0
Tunnels of the initiator: 1
Initiator fails: 0
Answering machine fails: 0
Ability system breaks down: 0
AUTH failed: 0
Decrypt failed: 0
Valid hash fails: 0
No failure his: 0Hello
On router R1, you gave the default route as output interface. Instead of using the output interface replace the IP address of the next hop. It will solve the issue of the reduction of ping.
IP route 0.0.0.0 0.0.0.0 FastEthernet0/0
IP route 0.0.0.0 0.0.0.0 100.100.100.1
HTH
"Please note the useful messages and mark the correct answer if it solves the problem."
-
Site to Site VPN configuration does not
Hello
I just tried to set up a test site to site VPN. Diagram of arrangement is attached. Router R2 is supposed to act as the 'Internet' to allow connectivity between the two networks.
My VPN on ASA1 and ASA2 configs are below:
ASA1
Note to outside_cryptomap_1 to access list VPN traffic to encrypt
outside_cryptomap_1 to access extended list ip 10.10.10.0 allow 255.255.255.0 172.16.10.0 255.225.255.0Crypto ikev1 allow outside
IKEv1 crypto policy 1
preshared authentication
aes-256 encryption
sha hash
Group 5
life 86400tunnel-group 11.11.11.2 type ipsec-l2l
IPSec-attributes tunnel-Group 11.11.11.2
Cisco pre-shared key IKEv1Crypto ipsec transform-set ikev1 AES - SHA esp-aes-256 esp-sha-hmac
card crypto outside_map 1 match address outside_cryptomap_1
peer set card crypto outside_map 1 11.11.11.2
card crypto outside_map 1 set of transformation-AES-SHA
outside_map interface card crypto outsideASA2
Note to outside_cryptomap_1 to access list VPN traffic to encrypt
permit access list extended ip 172.16.10.0 outside_cryptomap_1 255.255.255.0 10.10.10.0 255.225.255.0Crypto ikev1 allow outside
IKEv1 crypto policy 1
preshared authentication
aes-256 encryption
sha hash
Group 5
life 86400tunnel-group 12.12.12.2 type ipsec-l2l
IPSec-attributes tunnel-group 12.12.12.2
Cisco pre-shared key IKEv1Crypto ipsec transform-set ikev1 AES - SHA esp-aes-256 esp-sha-hmac
card crypto outside_map 1 match address outside_cryptomap_1
peer set card crypto outside_map 1 12.12.12.2
card crypto outside_map 1 set of transformation-AES-SHA
outside_map interface card crypto outsideI can ping with the ASA2 ASA1, but when I try to test the VPN trying from one PC to another, I get nothing.
I tried a few commands show and they came out absolutely empty... as I have not configured:
SH in detail its crypto isakmp
There are no SAs IKEv1
There are no SAs IKEv2
SH crypto ipsec his
There is no ipsec security associations
Anyone have any ideas?
Hi martin,
Your configs are quite right. I tried your script, its works really well. Here's the configs & outputs.
What I mentioned in the previous note follow this.--------------------
ASA1
ASA1 (config) # sh run
: Saved
:
ASA Version 8.0 (2)
!
hostname ASA1
activate 8Ry2YjIyt7RRXU24 encrypted password
names of
!
interface Ethernet0/0
nameif outside
security-level 0
IP 12.12.12.2 255.255.255.0
!
interface Ethernet0/1
nameif inside
security-level 100
10.10.10.2 IP address 255.255.255.0
!
interface Ethernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/4
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/4
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/5
Shutdown
No nameif
no level of security
no ip address
!
2KFQnbNIdI.2KYOU encrypted passwd
passive FTP mode
extended vpn 10.10.10.0 ip access list allow 255.255.255.0 172.16.10.0 255.255.255.0
pager lines 24
Within 1500 MTU
Outside 1500 MTU
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Route outside 0.0.0.0 0.0.0.0 12.12.12.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout, uauth 0:05:00 absolute
dynamic-access-policy-registration DfltAccessPolicy
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-sha-hmac tset
card crypto cmap 1 match for vpn
card crypto cmap 1 set peer 11.11.11.2
card crypto cmap 1 transform-set tset
cmap outside crypto map interface
crypto ISAKMP allow outside
crypto ISAKMP policy 1
preshared authentication
3des encryption
md5 hash
Group 5
life 86400
crypto ISAKMP policy 65535
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
a basic threat threat detection
Statistics-list of access threat detection
!
!
tunnel-group 11.11.11.2 type ipsec-l2l
IPSec-attributes tunnel-Group 11.11.11.2
pre-shared-key *.
context of prompt hostname
Cryptochecksum:00000000000000000000000000000000
: end
ASA1 (config) #.
---------------------ASA2 (config) # sh run
: Saved
:
ASA Version 8.0 (2)
!
hostname ASA2
activate 8Ry2YjIyt7RRXU24 encrypted password
names of
!
interface Ethernet0/0
nameif outside
security-level 0
IP 11.11.11.2 255.255.255.0
!
interface Ethernet0/1
nameif inside
security-level 100
IP 172.16.10.2 255.255.255.0
!
interface Ethernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/4
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/5
Shutdown
No nameif
no level of security
no ip address
!
2KFQnbNIdI.2KYOU encrypted passwd
passive FTP mode
extended vpn 172.16.10.0 ip access list allow 255.255.255.0 10.10.10.0 255.255.255.0
pager lines 24
Outside 1500 MTU
Within 1500 MTU
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Route outside 0.0.0.0 0.0.0.0 11.11.11.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout, uauth 0:05:00 absolute
dynamic-access-policy-registration DfltAccessPolicy
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-sha-hmac tset
card crypto cmap 1 match for vpn
card crypto cmap 1 set peer 12.12.12.2
card crypto cmap 1 transform-set tset
cmap outside crypto map interface
crypto ISAKMP allow outside
crypto ISAKMP policy 1
preshared authentication
3des encryption
md5 hash
Group 5
life 86400
crypto ISAKMP policy 65535
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
a basic threat threat detection
Statistics-list of access threat detection
!
!
!
tunnel-group 12.12.12.2 type ipsec-l2l
IPSec-attributes tunnel-group 12.12.12.2
pre-shared-key *.
context of prompt hostname
Cryptochecksum:00000000000000000000000000000000
: end
ASA2 (config) #.-------------------------
OUTPUTS:*********************
ASA1 (config) # sh crypto isakmp his
ITS enabled: 1
Generate a new key SA: 0 (a tunnel report Active 1 and 1 to generate a new key during the generate a new key)
Total SA IKE: 11 peer IKE: 11.11.11.2
Type: L2L role: initiator
Generate a new key: no State: MM_ACTIVE---------------------
ASA1 (config) # sh crypto ipsec his
Interface: outside
Tag crypto map: cmap, seq num: 1, local addr: 12.12.12.2access vpn ip 10.10.10.0 list allow 255.255.255.0 172.16.10.0 255.255.255.0
local ident (addr, mask, prot, port): (10.10.10.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (172.16.10.0/255.255.255.0/0/0)
current_peer: 11.11.11.2#pkts program: 50, #pkts encrypt: 50, #pkts digest: 50
#pkts decaps: 49, #pkts decrypt: 49, #pkts check: 49
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 50, comp #pkts failed: 0, #pkts Dang failed: 0
success #frag before: 0, failures before #frag: 0, #fragments created: 0
Sent #PMTUs: 0, #PMTUs rcvd: 0, reassembly: 20th century / of frgs #decapsulated: 0
#send errors: 0, #recv errors: 0local crypto endpt. : 12.12.12.2, remote Start crypto. : 11.11.11.2
------------------------
ASA2 (config) # sh crypto isakmp hisITS enabled: 1
Generate a new key SA: 0 (a tunnel report Active 1 and 1 to generate a new key during the generate a new key)
Total SA IKE: 11 peer IKE: 12.12.12.2
Type: L2L role: answering machine
Generate a new key: no State: MM_ACTIVE------------------------
ASA2 (config) # sh crypto ipsec his
Interface: outside
Tag crypto map: cmap, seq num: 1, local addr: 11.11.11.2access vpn ip 172.16.10.0 list allow 255.255.255.0 10.10.10.0 255.255.255.0
local ident (addr, mask, prot, port): (172.16.10.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (10.10.10.0/255.255.255.0/0/0)
current_peer: 12.12.12.2#pkts program: 49, #pkts encrypt: 49, #pkts digest: 49
#pkts decaps: 50, #pkts decrypt: 50, #pkts check: 50
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 49, #pkts comp failed: 0, #pkts Dang failed: 0
success #frag before: 0, failures before #frag: 0, #fragments created: 0
Sent #PMTUs: 0, #PMTUs rcvd: 0, reassembly: 20th century / of frgs #decapsulated: 0
#send errors: 0, #recv errors: 0local crypto endpt. : 11.11.11.2, remote Start crypto. : 12.12.12.2
------------------------- -
Site to Site VPN Cisco IOS 1941 15.0 (1) M1
Hello
I am currently developing a Site VPN site between an ASA and a router in 1941. Configuring VPN on the SAA seems to be ok, because it works without problem with router 1841 with IOS 12.4 to the other site. The same VPN configuration on the new router in 1941 with M1 IOS 15.0 (1) does not work. It seems that the access to the crypto map list is the problem. The router never start the VPN connection. When the ASA attempts to establish the VPN, the debugging of the router log shows:
...
* 14:37:52.263 may 5: ISAKMP: (1007): proposal of IPSec checking 1
* 14:37:52.263 may 5: ISAKMP: turn 1, ESP_3DES
* 14:37:52.263 may 5: ISAKMP: attributes of transformation:
* 14:37:52.263 may 5: ISAKMP: type of life in seconds
* 14:37:52.263 may 5: ISAKMP: life of HIS (basic) of 28800
* 14:37:52.263 may 5: ISAKMP: type of life in kilobytes
* 14:37:52.263 may 5: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
* 14:37:52.263 may 5: ISAKMP: program is 1 (Tunnel)
* 14:37:52.263 may 5: ISAKMP: authenticator is HMAC-SHA
* 14:37:52.263 may 5: ISAKMP: group is 2
* 14:37:52.263 may 5: ISAKMP: (1007): atts are acceptable.
* 5 May 14:37:52.263: ISAKMP: (1007): IPSec policy invalidated proposal with error 32
* 5 May 14:37:52.263: ISAKMP: (1007): politics of ITS phase 2 is not acceptable! (local... remote control...)...
Any clue?
Concerning
Claudia
The configuration of the router:
version 15.0
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
hostname Cisco1941
!
No aaa new-model
!
No ipv6 cef
no ip source route
IP cef
!
IP domain name xyz.de
!
Authenticated MultiLink bundle-name Panel
!
Crypto pki trustpoint TP-self-signature-...
!
TP-self-signature-... crypto pki certificate chain
quit smoking
license udi pid CISCO1941/K9 sn...
!
username privilege 15 secret 5 xyz $1$...
!
redundancy
!
session of crypto consignment
!
crypto ISAKMP policy 10
BA 3des
preshared authentication
Group 2
ISAKMP crypto key... address 1.2.3.4
invalid-spi-recovery crypto ISAKMP
!
Crypto ipsec transform-set esp-3des esp-sha-hmac tsAsa
!
ASA 10 ipsec-isakmp crypto map
defined peer 1.2.3.4
Set transform-set tsAsa
PFS group2 Set
match address 100
!
interface GigabitEthernet0/0
Description * inside *.
IP 10.100.100.1 255.255.255.0
automatic duplex
automatic speed
!
!
interface GigabitEthernet0/1
IP 5.6.7.8 255.255.255.240
IP access-group 111 to
no ip-cache cef route
no ip route cache
automatic duplex
automatic speed
card crypto asa
!
!
ATM0/0/0 interface
no ip address
Shutdown
No atm ilmi-keepalive
!
!
IP forward-Protocol ND
!
IP route 0.0.0.0 0.0.0.0 1.2.3.5
!
access-list 100 permit ip 10.100.100.0 0.0.0.255 10.10.10.0 0.0.0.255
access-list 111 allow esp 1.2.3.4 host 5.6.7.8
access-list 111 permit udp host 1.2.3.4 host 5.6.7.8 eq isakmp
access-list 111 allow ahp host 1.2.3.4 5.6.7.8
access-list 111 deny ip any any newspaper....
end
Try to do this:
IP route 10.10.10.0 255.255.255.0 interface Ge0/1
Route IP 1.2.3.4 255.255.255.255 by default-gateway-to-Ge0/1
The rest of your config looks very good.
-
Hi all
After you follow the guides on the site to site VPN and NAT I am very close with this, but suspect a minor error here. It was difficult to apply some of the examples of cisco worked the additional complexity here (VLANS, routing to an address static IP), as well as due to inexperience with some routing commands.
Requirements:
-Provide internet access for three local networks (10.10.10.0/29 for the management of the router, 192.168.1.0/24 for the most of the PC, 172.22.81.160/28 for a PC for VPN and wireless)
-Set up a VPN site-to site between 172.22.81.160 and a remote VPN router to 194.73. ***. ***
-Transfer all 172.22.81.160 traffic destined to the 195.218 IP only. ***. (cited to me as 195.218.***.***/32) over the site to site VPN
MBM may be confusing that 195.218. ***. is a public IP address, where I would normally expect a private IP address. This has been checked and confirmed. It's certainly accessible only via the VPN tunnel. So far, everything works as expected, except for the VPN. Cisco diagnosis report that everything is going well except for the tunnel are declining and no traffic going back 195.218. ***. ***
I have not spotted the error, help appreciated!
My next step would be to simplify the config by removing unnecessary commands one by one and then check again against examples and manual. Attached config.
Kind regards
John
References:
http://www.Cisco.com/c/en/us/support/docs/security-VPN/IPSec-negotiation...
http://www.Cisco.com/c/en/us/support/docs/security-VPN/IPSec-negotiation...
Requirements of VPN:
IKE Phase 1
Diffie-Hellman group: 2
Version of IKE: IKEv1
IKE Lifetime: 86400
Aggressive mode: No.
Encryption: AES 256
Integrity: SHA2-256
Authetication method: pre-sharedIKE Phase 2
PFS: Yes
PFS DH group: 2
Life: 3600
Encryption: AES 256
Integrity: SHA2-256Good things! Happy that you guessed it sorted.
-
Several subnets in the site to Site VPN
Hi guys,.
I would like to set up a site of tunnel VPN stie with several subnets. I could not find a configuration which is my problem. I hope you can help me with the solution.
You can find my design network attach to this subject.
This is my setup on the ASA:(1) NAT excemption for network traffic, go to the Site to site VPN.
NAT (MGMTLAN, INT STSVPN) static source 192.168.10.0 192.168.10.0 static destination 192.168.31.0 192.168.31.0
NAT (inside, INT STSVPN) static source 192.168.15.0 192.168.15.0 static destination 192.168.38.0 192.168.38.0(2) the Accesslist with traffic to encrypt
object-group network 192.168.10.0
object-network 192.168.10.0 255.255.255.0object-group network 192.168.15.0
object-network 192.168.15.0 255.255.255.0the 192.168.38.0 object-group network
object-network 192.168.38.0 255.255.255.0the 192.168.31.0 object-group network
object-network 192.168.31.0 255.255.255.0object-group network STSVPN-LOCAL
Group-object 192.168.10.0
purpose of group - 192.168.15.0object-group network STSVPN-US
purpose of group - 192.168.38.0
purpose of group - 192.168.31.0ACL_STSVPN-US allowed extended ip access-list object-STSVPN-LOCAL object group STSVPN-American
(3) proposal phase 1
IKEv2 crypto policy 10
aes-256 encryption
sha256 integrity
Group 14
FRP sha256
second life 86400(4) proposal phase 2
Crypto ipsec ikev2 proposal ipsec IKEV2-IPSEC-ESP-AES-SHA
Protocol esp encryption aes-256
Protocol esp integrity sha-256(5) group tunnel
tunnel-group 4.4.4.4 type ipsec-l2l
tunnel-group 4.4.4.4 General attributes
Group Policy - by default-GrpPolicy-STSVPN-US
IPSec-attributes tunnel-group 14.4.4.4
IKEv2 remote-authentication pre-shared key abcd
IKEv2 authentication local pre-shared key abcdGroupPolicy
Group Policy GrpPolicy-STSVPN-US internal
Group Policy attributes GrpPolicy-STSVPN-US
value of VPN-filter STSVPN-US
Ikev2 VPN-tunnel-Protocol(5) crypto card
10 CM-STSVPN crypto card matches the address STSVPN-US
10 CM - STSVPN peer set 4.4.4.4 crypto card
card crypto 10 CM-STSVPN set ikev2 proposal ipsec IKEV2-IPSEC-ESP-AES-SHA
interface card crypto INT-STSVPN CM-STSVPN
Crypto ikev2 enable INT-STSVPN
/////////////////////////////////////////////////////////////////////The router configuration:
(1) part SA
proposal of crypto ikev2 ki2. PROP
encryption aes-cbc-256
sha256 integrity
Group 14
IKEv2 crypto policy ki2. POL
proposal ki2. PROP
ikev2 KR1 encryption keys
peer ASALAB
address 2.2.2.2
pre-shared key local abcd
pre-shared key remote abcd
Profile of crypto ikev2 ki2. TEACHER
match one address remote identity 2.2.2.2 255.255.255.255
address local identity 4.4.4.4
sharing front of remote authentication
sharing of local meadow of authentication
door-key local KR1
(2) TransformsetCrypto ipsec transform-set TS. VPN2, esp esp - aes hmac-sha256-256
tunnel mode(3) access-list
IP ACL extended access list. VPNIKE2
IP 192.168.31.0 allow 0.0.0.255 192.168.10.0 0.0.0.255
IP 192.168.38.0 allow 0.0.0.255 192.168.15.0 0.0.0.255
(5) crypto cardcrypto CM card. 30 VPN ipsec-isakmp
defined peer 2.2.2.2
the transform-set TS value. VPN2
group14 Set pfs
ki2 ikev2-profile value. TEACHER
match address ACL. VPNIKE2
//////////////////////////////////////////////////////////////////////This configuration is correct to allow both subnets on each side of the VPN tunnel to communicate with each other.
192.168.31.0 subnet cannot communicate with 192.168.10.0
192.168.38.0 subnet cannot communicate with 192.168.15.0Hello Jay,
I went during the configuration of the two aircraft and noticed a few errors on the configuration of the SAA. Details here:
(1) the access list configured for VPN traffic is named ACL_STSVPN-US, however the address for correspondence configured on the map encryption uses a group of objects name instead:
address for correspondence card crypto 10 CM - STSVPN STSVPN-US
You must change this setting to avoid any problems with the negotiation of traffic:
no matching address card crypto 10 CM-STSVPN STSVPN-US
10 CM-STSVPN crypto card matches the address ACL_STSVPN-US
(2) you also have the same error on the configured vpn filter. However, you could not use the access list ACL_STSVPN-United States for VPN filter since the ASA will filter incoming packets only. In this case the appropriate ACL will be configured for remote network (ROUTER) to local networks (ASA). It will look something like this:
access-list VPN_filter extended permitted ip object-STSVPN-US group LOCAL STSVPN
access-list VPN_filter extended permitted ip object-STSVPN-US group LOCAL STSVPN
Group Policy attributes GrpPolicy-STSVPN-US
VPN-Filter VPN_filter valueKeep in mind that the VPN filter is in the rules that determine whether to allow or deny packets of data tunnelees coming through the device security, based on criteria such as the source, destination, and Protocol address address. If you want to use the IP Protocol, the filter will not make a difference.
(3) group 14 of the PFS is configured on the router crypto map, but not on the SAA. You need to even add it in the card encryption ASA or remove it from the router.
ASA:
card crypto 10 CM-STSVPN set group14 pfs
Router:
crypto CM card. 30 VPN ipsec-isakmp
No group14 set pfs
Hope this help you to raise the tunnel,
Luis.
-
Site to SIte VPN through a NAT device
I have, I am having trouble running a vpn site-to site between two 3725 routers running c3725-advsecurityk9-mz124 - 15 T 1, that I hope I can get some help with, I am probably missing something here. The VPN ran very well when both VPN routers were connected directly to the internet and had on WAN interfaces public IP addresses, but I had to move one of the firewall inside on a private IP address. Installation is now as below
Router VPN one (192.168.248.253) - internal company network - Fortigate FW - internet-(217.155.113.179) router VPN B
The fortigate FW is doing some translations address
-traffic between 192.168.248.253 and 217.155.113.179 has its source in 37.205.62.5
-traffic between 217.155.113.179 and 37.205.62.5 has its destination translated to 192.168.248.253
-Firewall rules allow all traffic between the 2 devices, no port locking enabled.-The 37.205.62.5 address is used by anything else.
I basically have a GRE tunnel between two routers, and I'm trying to encrypt it.
The router shows below
Card crypto SERVER-RTR #show
"S2S_VPN" 10 ipsec-isakmp crypto map
Peer = 217.155.113.179
Expand the access IP 101 list
access-list 101 permit gre 192.168.248.253 host 217.155.113.179
Current counterpart: 217.155.113.179
Life safety association: 4608000 Kbytes / 3600 seconds
PFS (Y/N): N
Transform sets = {}
STRONG,
}
Interfaces using crypto card S2S_VPN:
FastEthernet0/1SERVER-RTR #show crypto sessio
Current state of the session cryptoInterface: FastEthernet0/1
The session state: down
Peer: 217.155.113.179 port 500
FLOW IPSEC: allowed 47 192.168.248.253 host 217.155.113.179
Active sAs: 0, origin: card cryptoInterface: FastEthernet0/1
The session state: IDLE-UP
Peer: 217.155.113.179 port 4500
IKE SA: local 192.168.248.253/4500 remote 217.155.113.179/4500 Active
IKE SA: local 192.168.248.253/4500 remote 217.155.113.179/4500 inactive
IKE SA: local 192.168.248.253/4500 remote 217.155.113.179/4500 inactiveRouter B shows below
Card crypto BSU - RTR #show
"S2S_VPN" 10 ipsec-isakmp crypto map
Peer = 37.205.62.5
Expand the access IP 101 list
access-list 101 permit gre 217.155.113.179 host 37.205.62.5
Current counterpart: 37.205.62.5
Life safety association: 4608000 Kbytes / 3600 seconds
PFS (Y/N): N
Transform sets = {}
STRONG,
}
Interfaces using crypto card S2S_VPN:
FastEthernet0/1BSU - RTR #show sess crypto
Current state of the session cryptoInterface: FastEthernet0/1
The session state: down
Peer: 37.205.62.5 port 500
FLOW IPSEC: allowed 47 217.155.113.179 host 37.205.62.5
Active sAs: 0, origin: card cryptoInterface: FastEthernet0/1
The session state: IDLE-UP
Peer: 37.205.62.5 port 4500
IKE SA: local 217.155.113.179/4500 remote 37.205.62.5/4500 Active
IKE SA: local 217.155.113.179/4500 remote 37.205.62.5/4500 inactive
IKE SA: local 217.155.113.179/4500 remote 37.205.62.5/4500 inactiveI can see counters incrementing on the ACL on both routers, so I don't know the traffic free WILL is interesting.
Here are a few debugs too
--------------
RouterDebug crypto ISAKMP
* 23:07:10.898 Mar 2: ISAKMP: (1024): purge the node 940426884
* 23:07:10.898 Mar 2: ISAKMP: (1024): purge the node 1837874301
* 23:07:10.898 Mar 2: ISAKMP: (1024): purge the node-475409474
* 23:07:20.794 Mar 2: ISAKMP (0:0): received 217.155.113.179 packet dport 500 sport 500 SA NEW Global (N)
* 23:07:20.794 Mar 2: ISAKMP: created a struct peer 217.155.113.179, peer port 500
* 23:07:20.794 Mar 2: ISAKMP: new position created post = 0x64960C04 peer_handle = 0x80000F0E
* 23:07:20.794 Mar 2: ISAKMP: lock struct 0x64960C04, refcount 1 to peer crypto_isakmp_process_block
* 23:07:20.794 Mar 2: ISAKMP: 500 local port, remote port 500
* 23:07:20.794 Mar 2: ISAKMP: find a dup her to the tree during the isadb_insert his 6464D3F0 = call BVA
* 23:07:20.794 Mar 2: ISAKMP: (0): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH
* 23:07:20.794 Mar 2: ISAKMP: (0): former State = new State IKE_READY = IKE_R_MM1* 2 Mar 23:07:20.794: ISAKMP: (0): treatment ITS payload. Message ID = 0
* 2 Mar 23:07:20.794: ISAKMP: (0): load useful vendor id of treatment
* 2 Mar 23:07:20.794: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 69
* 23:07:20.798 Mar 2: ISAKMP (0:0): provider ID is NAT - T RFC 3947
* 2 Mar 23:07:20.798: ISAKMP: (0): load useful vendor id of treatment
* 2 Mar 23:07:20.798: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 245
* 23:07:20.798 Mar 2: ISAKMP (0:0): provider ID is NAT - T v7
* 2 Mar 23:07:20.798: ISAKMP: (0): load useful vendor id of treatment
* 2 Mar 23:07:20.798: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 157
* 2 Mar 23:07:20.798: ISAKMP: (0): provider ID is NAT - T v3
* 2 Mar 23:07:20.798: ISAKMP: (0): load useful vendor id of treatment
* 2 Mar 23:07:20.798: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 123
* 2 Mar 23:07:20.798: ISAKMP: (0): provider ID is NAT - T v2
* 23:07:20.798 Mar 2: ISAKMP: (0): pair found pre-shared key matching 217.155.113.179
* 2 Mar 23:07:20.798: ISAKMP: (0): pre-shared key local found
* 23:07:20.798 Mar 2: ISAKMP: analysis of the profiles for xauth...
* 23:07:20.798 Mar 2: ISAKMP: (0): audit ISAKMP transform 1 against the policy of priority 1
* 23:07:20.798 Mar 2: ISAKMP: DES-CBC encryption
* 23:07:20.798 Mar 2: ISAKMP: SHA hash
* 23:07:20.798 Mar 2: ISAKMP: default group 1
* 23:07:20.798 Mar 2: ISAKMP: pre-shared key auth
* 23:07:20.798 Mar 2: ISAKMP: type of life in seconds
* 23:07:20.798 Mar 2: ISAKMP: life (IPV) 0 x 0 0 x 1 0 x 51 0x80
* 23:07:20.798 Mar 2: ISAKMP: (0): atts are acceptable. Next payload is 0
* 23:07:20.798 Mar 2: ISAKMP: (0): Acceptable atts: real life: 0
* 23:07:20.798 Mar 2: ISAKMP: (0): Acceptable atts:life: 0
* 23:07:20.798 Mar 2: ISAKMP: (0): fill atts in his vpi_length:4
* 23:07:20.798 Mar 2: ISAKMP: (0): fill atts in his life_in_seconds:86400
* 23:07:20.798 Mar 2: ISAKMP: (0): return real life: 86400
* 23:07:20.798 Mar 2: ISAKMP: (0): timer life Started: 86400.* 2 Mar 23:07:20.798: ISAKMP: (0): load useful vendor id of treatment
* 2 Mar 23:07:20.798: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 69
* 23:07:20.798 Mar 2: ISAKMP (0:0): provider ID is NAT - T RFC 3947
* 2 Mar 23:07:20.798: ISAKMP: (0): load useful vendor id of treatment
* 2 Mar 23:07:20.798: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 245
* 23:07:20.798 Mar 2: ISAKMP (0:0): provider ID is NAT - T v7
* 2 Mar 23:07:20.798: ISAKMP: (0): load useful vendor id of treatment
* 2 Mar 23:07:20.798: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 157
* 2 Mar 23:07:20.798: ISAKMP: (0): provider ID is NAT - T v3
* 2 Mar 23:07:20.798: ISAKMP: (0): load useful vendor id of treatment
* 2 Mar 23:07:20.798: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 123
* 2 Mar 23:07:20.798: ISAKMP: (0): provider ID is NAT - T v2
* 23:07:20.798 Mar 2: ISAKMP: (0): entry = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
* 23:07:20.798 Mar 2: ISAKMP: (0): former State = new State IKE_R_MM1 = IKE_R_MM1* 2 Mar 23:07:20.802: ISAKMP: (0): built of NAT - T of the seller-rfc3947 ID
* 2 Mar 23:07:20.802: ISAKMP: (0): lot of 217.155.113.179 sending my_port 500 peer_port 500 (R) MM_SA_SETUP
* 23:07:20.802 Mar 2: ISAKMP: (0): sending a packet IPv4 IKE.
* 23:07:20.802 Mar 2: ISAKMP: (0): entry = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
* 23:07:20.802 Mar 2: ISAKMP: (0): former State = new State IKE_R_MM1 = IKE_R_MM2* 23:07:20.822 Mar 2: ISAKMP (0:0): received 217.155.113.179 packet 500 Global 500 (R) sport dport MM_SA_SETUP
* 23:07:20.822 Mar 2: ISAKMP: (0): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH
* 23:07:20.822 Mar 2: ISAKMP: (0): former State = new State IKE_R_MM2 = IKE_R_MM3* 2 Mar 23:07:20.822: ISAKMP: (0): processing KE payload. Message ID = 0
* 2 Mar 23:07:20.850: ISAKMP: (0): processing NONCE payload. Message ID = 0
* 23:07:20.854 Mar 2: ISAKMP: (0): pair found pre-shared key matching 217.155.113.179
* 2 Mar 23:07:20.854: ISAKMP: (1027): load useful vendor id of treatment
* 2 Mar 23:07:20.854: ISAKMP: (1027): provider ID is the unit
* 2 Mar 23:07:20.854: ISAKMP: (1027): load useful vendor id of treatment
* 2 Mar 23:07:20.854: ISAKMP: (1027): provider ID is DPD
* 2 Mar 23:07:20.854: ISAKMP: (1027): load useful vendor id of treatment
* 2 Mar 23:07:20.854: ISAKMP: (1027): addressing another box of IOS!
* 23:07:20.854 Mar 2: ISAKMP: receives the payload type 20
* 23:07:20.854 Mar 2: ISAKMP (0:1027): NAT found, the node inside the NAT
* 23:07:20.854 Mar 2: ISAKMP: receives the payload type 20
* 23:07:20.854 Mar 2: ISAKMP: (1027): entry = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
* 23:07:20.854 Mar 2: ISAKMP: (1027): former State = new State IKE_R_MM3 = IKE_R_MM3* 2 Mar 23:07:20.854: ISAKMP: (1027): lot of 217.155.113.179 sending my_port 500 peer_port 500 (R) MM_KEY_EXCH
* 23:07:20.854 Mar 2: ISAKMP: (1027): sending a packet IPv4 IKE.
* 23:07:20.858 Mar 2: ISAKMP: (1027): entry = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
* 23:07:20.858 Mar 2: ISAKMP: (1027): former State = new State IKE_R_MM3 = IKE_R_MM4* 23:07:20.898 Mar 2: ISAKMP: (1024): serving SA., his is 64D5723C, delme is 64D5723C
* 23:07:20.902 Mar 2: ISAKMP (0:1027): received 217.155.113.179 packet dport 4500 4500 Global (R) MM_KEY_EXCH sport
* 23:07:20.902 Mar 2: ISAKMP: (1027): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH
* 23:07:20.902 Mar 2: ISAKMP: (1027): former State = new State IKE_R_MM4 = IKE_R_MM5* 2 Mar 23:07:20.902: ISAKMP: (1027): payload ID for treatment. Message ID = 0
* 23:07:20.902 Mar 2: ISAKMP (0:1027): payload ID
next payload: 8
type: 1
address: 217.155.113.179
Protocol: 17
Port: 0
Length: 12
* 2 Mar 23:07:20.902: ISAKMP: (0): peer games * no * profiles
* 2 Mar 23:07:20.906: ISAKMP: (1027): HASH payload processing. Message ID = 0
* 2 Mar 23:07:20.906: ISAKMP: (1027): treatment protocol NOTIFIER INITIAL_CONTACT 1
SPI 0, message ID = 0, a = 6464D3F0
* 23:07:20.906 Mar 2: ISAKMP: (1027): SA authentication status:
authenticated
* 23:07:20.906 Mar 2: ISAKMP: (1027): SA has been authenticated with 217.155.113.179
* 23:07:20.906 Mar 2: ISAKMP: (1027): port detected floating port = 4500
* 23:07:20.906 Mar 2: ISAKMP: try to find found and existing peer 192.168.248.253/217.155.113.179/4500/ peer 648EAD00 to reuse existing, free 64960 04
* 23:07:20.906 Mar 2: ISAKMP: Unlocking counterpart struct 0x64960C04 Reuse existing peer count 0
* 23:07:20.906 Mar 2: ISAKMP: delete peer node by peer_reap for 217.155.113.179: 64960 04
* 23:07:20.906 Mar 2: ISAKMP: lock struct 0x648EAD00, refcount 2 for peer peer reuse existing
* 23:07:20.906 Mar 2: ISAKMP: (1027): SA authentication status:
authenticated
* 2 Mar 23:07:20.906: ISAKMP: (1027): process of first contact.
lowering existing phase 1 and 2 with local 192.168.248.253 217.155.113.179 remote remote port 4500
* 23:07:20.906 Mar 2: ISAKMP: (1026): received first contact, delete SA
* 23:07:20.906 Mar 2: ISAKMP: (1026): peer does not paranoid KeepAlive.* 23:07:20.906 Mar 2: ISAKMP: (1026): deletion of 'Initial of receive Contact' State HIS reason (R) QM_IDLE (post 217.155.113.179)
* 23:07:20.906 Mar 2: ISAKMP: (0): cannot decrement IKE Call Admission Control incoming_active stat because he's already 0.
* 23:07:20.906 Mar 2: ISAKMP: (1027): UDP ENC parameter counterpart struct 0x0 his = 0x6464D3F0
* 23:07:20.906 Mar 2: ISAKMP: (1027): entry = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
* 23:07:20.906 Mar 2: ISAKMP: (1027): former State = new State IKE_R_MM5 = IKE_R_MM5* 23:07:20.910 Mar 2: ISAKMP: node set-98987637 to QM_IDLE
* 2 Mar 23:07:20.910: ISAKMP: (1026): lot of 217.155.113.179 sending peer_port my_port 4500 4500 (R) QM_IDLE
* 23:07:20.910 Mar 2: ISAKMP: (1026): sending a packet IPv4 IKE.
* 23:07:20.910 Mar 2: ISAKMP: (1026): purge the node-98987637
* 23:07:20.910 Mar 2: ISAKMP: (1026): entry = IKE_MESG_INTERNAL, IKE_PHASE1_DEL
* 23:07:20.910 Mar 2: ISAKMP: (1026): former State = new State IKE_P1_COMPLETE = IKE_DEST_SA* 23:07:20.910 Mar 2: ISAKMP: (1027): ITS been pre-shared key, using id ID_IPV4_ADDR type authentication
* 23:07:20.910 Mar 2: ISAKMP (0:1027): payload ID
next payload: 8
type: 1
address: 192.168.248.253
Protocol: 17
Port: 0
Length: 12
* 23:07:20.910 Mar 2: ISAKMP: (1027): the total payload length: 12
* 2 Mar 23:07:20.914: ISAKMP: (1027): lot of 217.155.113.179 sending peer_port my_port 4500 4500 (R) MM_KEY_EXCH
* 23:07:20.914 Mar 2: ISAKMP: (1027): sending a packet IPv4 IKE.
* 23:07:20.914 Mar 2: ISAKMP: (1027): entry = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
* 23:07:20.914 Mar 2: ISAKMP: (1027): former State = new State IKE_R_MM5 = IKE_P1_COMPLETE* 23:07:20.914 Mar 2: ISAKMP: (1026): deletion of 'Initial of receive Contact' State HIS reason (R) QM_IDLE (post 217.155.113.179)
* 23:07:20.914 Mar 2: ISAKMP: Unlocking counterpart struct 0x648EAD00 for isadb_mark_sa_deleted(), count 1
* 23:07:20.914 Mar 2: ISAKMP: (1026): error suppression node 334747020 FALSE reason 'IKE deleted.
* 23:07:20.914 Mar 2: ISAKMP: (1026): node-1580729900 error suppression FALSE reason 'IKE deleted.
* 23:07:20.914 Mar 2: ISAKMP: (1026): node-893929227 error suppression FALSE reason 'IKE deleted.
* 23:07:20.914 Mar 2: ISAKMP: (1026): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH
* 23:07:20.914 Mar 2: ISAKMP: (1026): former State = new State IKE_DEST_SA = IKE_DEST_SA* 23:07:20.914 Mar 2: ISAKMP: (1027): entry = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE
* 23:07:20.914 Mar 2: ISAKMP: (1027): former State = new State IKE_P1_COMPLETE = IKE_P1_COMPLETE* 23:07:20.930 Mar 2: ISAKMP (0:1026): received 217.155.113.179 packet dport 4500 4500 Global (R) MM_NO_STATE sport
* 23:07:20.934 Mar 2: ISAKMP (0:1027): received 217.155.113.179 packet dport 4500 4500 Global (R) QM_IDLE sport
* 23:07:20.934 Mar 2: ISAKMP: node set 1860263019 to QM_IDLE
* 2 Mar 23:07:20.934: ISAKMP: (1027): HASH payload processing. Message ID = 1860263019
* 2 Mar 23:07:20.934: ISAKMP: (1027): treatment ITS payload. Message ID = 1860263019
* 23:07:20.934 Mar 2: ISAKMP: (1027): proposal of IPSec checking 1
* 23:07:20.934 Mar 2: ISAKMP: turn 1, ESP_AES
* 23:07:20.934 Mar 2: ISAKMP: attributes of transformation:
* 23:07:20.934 Mar 2: ISAKMP: program is 3 (Tunnel-UDP)
* 23:07:20.934 Mar 2: ISAKMP: type of life in seconds
* 23:07:20.934 Mar 2: ISAKMP: life of HIS (basic) 3600
* 23:07:20.934 Mar 2: ISAKMP: type of life in kilobytes
* 23:07:20.934 Mar 2: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
* 23:07:20.934 Mar 2: ISAKMP: key length is 128
* 23:07:20.934 Mar 2: ISAKMP: (1027): atts are acceptable.
* 2 Mar 23:07:20.934: ISAKMP: (1027): IPSec policy invalidated proposal with error 32
* 2 Mar 23:07:20.934: ISAKMP: (1027): politics of ITS phase 2 is not acceptable! (local 192.168.248.253 remote 217.155.113.179)
* 23:07:20.938 Mar 2: ISAKMP: node set 1961554007 to QM_IDLE
* 23:07:20.938 Mar 2: ISAKMP: (1027): Protocol to send NOTIFIER PROPOSAL_NOT_CHOSEN 3
SPI 1688526152, message ID = 1961554007
* 2 Mar 23:07:20.938: ISAKMP: (1027): lot of 217.155.113.179 sending peer_port my_port 4500 4500 (R) QM_IDLE
* 23:07:20.938 Mar 2: ISAKMP: (1027): sending a packet IPv4 IKE.
* 23:07:20.938 Mar 2: ISAKMP: (1027): purge the node 1961554007
* 23:07:20.938 Mar 2: ISAKMP: (1027): error suppression node 1860263019 REAL reason "QM rejected."
* 23:07:20.938 Mar 2: ISAKMP: (1027): entrance, node 1860263019 = IKE_MESG_FROM_PEER, IKE_QM_EXCH
* 23:07:20.938 Mar 2: ISAKMP: (1027): former State = new State IKE_QM_READY = IKE_QM_READY
* 23:07:24.510 Mar 2: ISAKMP: set new node 0 to QM_IDLE
* 2 Mar 23:07:24.510: ITS a exceptional applications (100.100.213.56 local port 4500, 100.100.213.84 remote port 4500)
* 2 Mar 23:07:24.510: ISAKMP: (1027): sitting IDLE. From QM immediately (QM_IDLE)
* 23:07:24.510 Mar 2: ISAKMP: (1027): start Quick Mode Exchange, M - ID 670698820
* 23:07:24.510 Mar 2: ISAKMP: (1027): initiator QM gets spi
* 2 Mar 23:07:24.510: ISAKMP: (1027): lot of 217.155.113.179 sending peer_port my_port 4500 4500 (R) QM_IDLE
* 23:07:24.510 Mar 2: ISAKMP: (1027): sending a packet IPv4 IKE.
* 23:07:24.514 Mar 2: ISAKMP: (1027): entrance, node 670698820 = IKE_MESG_INTERNAL, IKE_INIT_QM
* 23:07:24.514 Mar 2: ISAKMP: (1027): former State = new State IKE_QM_READY = IKE_QM_I_QM1
* 23:07:24.530 Mar 2: ISAKMP (0:1027): received 217.155.113.179 packet dport 4500 4500 Global (R) QM_IDLE sport
* 23:07:24.534 Mar 2: ISAKMP: node set 1318257670 to QM_IDLE
* 2 Mar 23:07:24.534: ISAKMP: (1027): HASH payload processing. Message ID = 1318257670
* 2 Mar 23:07:24.534: ISAKMP: (1027): treatment protocol NOTIFIER PROPOSAL_NOT_CHOSEN 3
SPI 3268378219, message ID = 1318257670, a = 6464D3F0
* 2 Mar 23:07:24.534: ISAKMP: (1027): removal of spi 3268378219 message ID = 670698820
* 23:07:24.534 Mar 2: ISAKMP: (1027): node 670698820 REAL reason error suppression "remove larval.
* 23:07:24.534 Mar 2: ISAKMP: (1027): error suppression node 1318257670 FALSE reason 'informational (en) State 1.
* 23:07:24.534 Mar 2: ISAKMP: (1027): entry = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY
* 23:07:24.534 Mar 2: ISAKMP: (1027): former State = new State IKE_P1_COMPLETE = IKE_P1_COMPLETE* 23:07:40.898 Mar 2: ISAKMP: (1025): purge the node-238086324
* 23:07:40.898 Mar 2: ISAKMP: (1025): purge the node-1899972726
* 23:07:40.898 Mar 2: ISAKMP: (1025): purge the node-321906720Router B
----------
Debug crypto ISAKMP1d23h: ISAKMP: (0): profile of THE request is (NULL)
1d23h: ISAKMP: created a struct peer 37.205.62.5, peer port 500
1d23h: ISAKMP: new position created post = 0x652C3B54 peer_handle = 0x80000D8C
1d23h: ISAKMP: lock struct 0x652C3B54, refcount 1 to peer isakmp_initiator
1d23h: ISAKMP: 500 local port, remote port 500
1d23h: ISAKMP: set new node 0 to QM_IDLE
1d23h: ISAKMP: find a dup her to the tree during the isadb_insert his 652CBDC4 = call BVA
1d23h: ISAKMP: (0): cannot start aggressive mode, try the main mode.
1d23h: ISAKMP: (0): pair found pre-shared key matching 37.205.62.5
1d23h: ISAKMP: (0): built of NAT - T of the seller-rfc3947 ID
1d23h: ISAKMP: (0): built the seller-07 ID NAT - t
1d23h: ISAKMP: (0): built of NAT - T of the seller-03 ID
1d23h: ISAKMP: (0): built the seller-02 ID NAT - t
1d23h: ISAKMP: (0): entry = IKE_MESG_FROM_IPSEC, IKE_SA_REQ_MM
1d23h: ISAKMP: (0): former State = new State IKE_READY = IKE_I_MM11d23h: ISAKMP: (0): Beginner Main Mode Exchange
1d23h: ISAKMP: (0): lot of 37.205.62.5 sending my_port 500 peer_port 500 (I) MM_NO_STATE
1d23h: ISAKMP: (0): sending a packet IPv4 IKE.
1d23h: ISAKMP (0:0): received 37.205.62.5 packet dport 500 sport Global 500 (I) MM_NO_STATE
1d23h: ISAKMP: (0): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH
1d23h: ISAKMP: (0): former State = new State IKE_I_MM1 = IKE_I_MM21d23h: ISAKMP: (0): treatment ITS payload. Message ID = 0
1d23h: ISAKMP: (0): load useful vendor id of treatment
1d23h: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 69
1d23h: ISAKMP (0:0): provider ID is NAT - T RFC 3947
1d23h: ISAKMP: (0): pair found pre-shared key matching 37.205.62.5
1d23h: ISAKMP: (0): pre-shared key local found
1d23h: ISAKMP: analysis of the profiles for xauth...
1d23h: ISAKMP: (0): audit ISAKMP transform 1 against the policy of priority 1
1d23h: ISAKMP: DES-CBC encryption
1d23h: ISAKMP: SHA hash
1d23h: ISAKMP: default group 1
1d23h: ISAKMP: pre-shared key auth
1d23h: ISAKMP: type of life in seconds
1d23h: ISAKMP: life (IPV) 0 x 0 0 x 1 0 x 51 0x80
1d23h: ISAKMP: (0): atts are acceptable. Next payload is 0
1d23h: ISAKMP: (0): Acceptable atts: real life: 0
1d23h: ISAKMP: (0): Acceptable atts:life: 0
1d23h: ISAKMP: (0): fill atts in his vpi_length:4
1d23h: ISAKMP: (0): fill atts in his life_in_seconds:86400
1d23h: ISAKMP: (0): return real life: 86400
1d23h: ISAKMP: (0): timer life Started: 86400.1d23h: ISAKMP: (0): load useful vendor id of treatment
1d23h: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 69
1d23h: ISAKMP (0:0): provider ID is NAT - T RFC 3947
1d23h: ISAKMP: (0): entry = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
1d23h: ISAKMP: (0): former State = new State IKE_I_MM2 = IKE_I_MM21d23h: ISAKMP: (0): lot of 37.205.62.5 sending my_port 500 peer_port 500 (I) MM_SA_SETUP
1d23h: ISAKMP: (0): sending a packet IPv4 IKE.
1d23h: ISAKMP: (0): entry = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
1d23h: ISAKMP: (0): former State = new State IKE_I_MM2 = IKE_I_MM31d23h: ISAKMP (0:0): received 37.205.62.5 packet dport 500 sport Global 500 (I) MM_SA_SETUP
1d23h: ISAKMP: (0): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH
1d23h: ISAKMP: (0): former State = new State IKE_I_MM3 = IKE_I_MM41d23h: ISAKMP: (0): processing KE payload. Message ID = 0
1d23h: ISAKMP: (0): processing NONCE payload. Message ID = 0
1d23h: ISAKMP: (0): pair found pre-shared key matching 37.205.62.5
1d23h: ISAKMP: (1034): load useful vendor id of treatment
1d23h: ISAKMP: (1034): provider ID is the unit
1d23h: ISAKMP: (1034): load useful vendor id of treatment
1d23h: ISAKMP: (1034): provider ID is DPD
1d23h: ISAKMP: (1034): load useful vendor id of treatment
1d23h: ISAKMP: (1034): addressing another box of IOS!
1d23h: ISAKMP: receives the payload type 20
1d23h: ISAKMP: receives the payload type 20
1d23h: ISAKMP (0:1034): NAT found, the node outside NAT
1d23h: ISAKMP: (1034): entry = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
1d23h: ISAKMP: (1034): former State = new State IKE_I_MM4 = IKE_I_MM41d23h: ISAKMP: (1034): send initial contact
1d23h: ISAKMP: (1034): ITS been pre-shared key, using id ID_IPV4_ADDR type authentication
1d23h: ISAKMP (0:1034): payload ID
next payload: 8
type: 1
address: 217.155.113.179
Protocol: 17
Port: 0
Length: 12
1d23h: ISAKMP: (1034): the total payload length: 12
1d23h: ISAKMP: (1034): lot of 37.205.62.5 sending peer_port my_port 4500 4500 (I) MM_KEY_EXCH
1d23h: ISAKMP: (1034): sending a packet IPv4 IKE.
1d23h: ISAKMP: (1034): entry = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
1d23h: ISAKMP: (1034): former State = new State IKE_I_MM4 = IKE_I_MM51d23h: ISAKMP: (1031): serving SA., his is 652D60C8, delme is 652D60C8
1d23h: ISAKMP (0:1033): received 37.205.62.5 packet dport 4500 sport Global 4500 (I) QM_IDLE
1d23h: ISAKMP: node set 33481563 to QM_IDLE
1d23h: ISAKMP: (1033): HASH payload processing. Message ID = 33481563
1d23h: ISAKMP: receives the payload type 18
1d23h: ISAKMP: (1033): treatment remove with load useful reason
1d23h: ISAKMP: (1033): remove the doi = 1
1d23h: ISAKMP: (1033): remove Protocol id = 1
1d23h: ISAKMP: (1033): remove spi_size = 16
1d23h: ISAKMP: (1033): remove the spis num = 1
1d23h: ISAKMP: (1033): delete_reason = 11
1d23h: ISAKMP: (1033): load DELETE_WITH_REASON, processing of message ID = 33481563, reason: Unknown delete reason!
1d23h: ISAKMP: (1033): peer does not paranoid KeepAlive.1d23h: ISAKMP: (1033): deletion of 'Initial of receive Contact' State HIS reason (I) QM_IDLE (post 37.205.62.5)
1d23h: ISAKMP: (1033): error suppression node 33481563 FALSE reason 'informational (en) State 1.
1d23h: ISAKMP: node set 1618266182 to QM_IDLE
1d23h: ISAKMP: (1033): lot of 37.205.62.5 sending peer_port my_port 4500 4500 (I) QM_IDLE
1d23h: ISAKMP: (1033): sending a packet IPv4 IKE.
1d23h: ISAKMP: (1033): purge the node 1618266182
1d23h: ISAKMP: (1033): entry = IKE_MESG_INTERNAL, IKE_PHASE1_DEL
1d23h: ISAKMP: (1033): former State = new State IKE_P1_COMPLETE = IKE_DEST_SA1d23h: ISAKMP (0:1034): received 37.205.62.5 packet dport 4500 sport Global 4500 (I) MM_KEY_EXCH
1d23h: ISAKMP: (1034): payload ID for treatment. Message ID = 0
1d23h: ISAKMP (0:1034): payload ID
next payload: 8
type: 1
address: 192.168.248.253
Protocol: 17
Port: 0
Length: 12
1d23h: ISAKMP: (0): peer games * no * profiles
1d23h: ISAKMP: (1034): HASH payload processing. Message ID = 0
1d23h: ISAKMP: (1034): SA authentication status:
authenticated
1d23h: ISAKMP: (1034): SA has been authenticated with 37.205.62.5
1d23h: ISAKMP: try to insert a 217.155.113.179/37.205.62.5/4500/ peer and found existing in a 643BCA10 to reuse, free 652C3B54
1d23h: ISAKMP: Unlocking counterpart struct 0x652C3B54 Reuse existing peer count 0
1d23h: ISAKMP: delete peer node by peer_reap for 37.205.62.5: 652C3B54
1d23h: ISAKMP: lock struct 0x643BCA10, refcount 2 for peer peer reuse existing
1d23h: ISAKMP: (1034): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH
1d23h: ISAKMP: (1034): former State = new State IKE_I_MM5 = IKE_I_MM61d23h: ISAKMP: (1033): deletion of 'Initial of receive Contact' State HIS reason (I) QM_IDLE (post 37.205.62.5)
1d23h: ISAKMP: (0): cannot decrement IKE Call Admission Control outgoing_active stat because he's already 0.
1d23h: ISAKMP: Unlocking counterpart struct 0x643BCA10 for isadb_mark_sa_deleted(), count 1
1d23h: ISAKMP: (1033): error suppression node 1267924911 FALSE reason 'IKE deleted.
1d23h: ISAKMP: (1033): error suppression node 1074093103 FALSE reason 'IKE deleted.
1d23h: ISAKMP: (1033): node-183194519 error suppression FALSE reason 'IKE deleted.
1d23h: ISAKMP: (1033): error suppression node 33481563 FALSE reason 'IKE deleted.
1d23h: ISAKMP: (1033): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH
1d23h: ISAKMP: (1033): former State = new State IKE_DEST_SA = IKE_DEST_SA1d23h: ISAKMP: (1034): entry = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
1d23h: ISAKMP: (1034): former State = new State IKE_I_MM6 = IKE_I_MM61d23h: ISAKMP: (1034): entry = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
1d23h: ISAKMP: (1034): former State = new State IKE_I_MM6 = IKE_P1_COMPLETE1d23h: ISAKMP: (1034): start Quick Mode Exchange, M - ID 1297417008
1d23h: ISAKMP: (1034): initiator QM gets spi
1d23h: ISAKMP: (1034): lot of 37.205.62.5 sending peer_port my_port 4500 4500 (I) QM_IDLE
1d23h: ISAKMP: (1034): sending a packet IPv4 IKE.
1d23h: ISAKMP: (1034): entrance, node 1297417008 = IKE_MESG_INTERNAL, IKE_INIT_QM
1d23h: ISAKMP: (1034): former State = new State IKE_QM_READY = IKE_QM_I_QM1
1d23h: ISAKMP: (1034): entry = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE
1d23h: ISAKMP: (1034): former State = new State IKE_P1_COMPLETE = IKE_P1_COMPLETE1d23h: ISAKMP (0:1034): received 37.205.62.5 packet dport 4500 sport Global 4500 (I) QM_IDLE
1d23h: ISAKMP: node set-874376893 to QM_IDLE
1d23h: ISAKMP: (1034): HASH payload processing. Message ID =-874376893
1d23h: ISAKMP: (1034): treatment protocol NOTIFIER PROPOSAL_NOT_CHOSEN 3
SPI 56853244, message ID =-874376893, his 652CBDC4 =
1d23h: ISAKMP: (1034): removal of spi 56853244 message ID = 1297417008
1d23h: ISAKMP: (1034): node 1297417008 REAL reason error suppression "remove larval.
1d23h: ISAKMP: (1034): node-874376893 error suppression FALSE reason 'informational (en) State 1.
1d23h: ISAKMP: (1034): entry = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY
1d23h: ISAKMP: (1034): former State = new State IKE_P1_COMPLETE = IKE_P1_COMPLETE1d23h: ISAKMP (0:1034): received 37.205.62.5 packet dport 4500 sport Global 4500 (I) QM_IDLE
1d23h: ISAKMP: node set 439453045 to QM_IDLE
1d23h: ISAKMP: (1034): HASH payload processing. Message ID = 439453045
1d23h: ISAKMP: (1034): treatment ITS payload. Message ID = 439453045
1d23h: ISAKMP: (1034): proposal of IPSec checking 1
1d23h: ISAKMP: turn 1, ESP_AES
1d23h: ISAKMP: attributes of transformation:
1d23h: ISAKMP: program is 3 (Tunnel-UDP)
1d23h: ISAKMP: type of life in seconds
1d23h: ISAKMP: life of HIS (basic) 3600
1d23h: ISAKMP: type of life in kilobytes
1d23h: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
1d23h: ISAKMP: key length is 128
1d23h: ISAKMP: (1034): atts are acceptable.
1d23h: ISAKMP: (1034): IPSec policy invalidated proposal with error 32
1d23h: ISAKMP: (1034): politics of ITS phase 2 is not acceptable! (local 217.155.113.179 remote 37.205.62.5)
1d23h: ISAKMP: node set 1494356901 to QM_IDLE
1d23h: ISAKMP: (1034): Protocol to send NOTIFIER PROPOSAL_NOT_CHOSEN 3
SPI 1687353736, message ID = 1494356901
1d23h: ISAKMP: (1034): lot of 37.205.62.5 sending peer_port my_port 4500 4500 (I) QM_IDLE
1d23h: ISAKMP: (1034): sending a packet IPv4 IKE.
1d23h: ISAKMP: (1034): purge the node 1494356901
1d23h: ISAKMP: (1034): error suppression node 439453045 REAL reason "QM rejected."
1d23h: ISAKMP: (1034): entrance, node 439453045 = IKE_MESG_FROM_PEER, IKE_QM_EXCH
1d23h: ISAKMP: (1034): former State = new State IKE_QM_READY = IKE_QM_READY
1d23h: ISAKMP: (1032): purge the node 1513722556
1d23h: ISAKMP: (1032): purge the node-643121396
1d23h: ISAKMP: (1032): purge the node 1350014243
1d23h: ISAKMP: (1032): purge the node 83247347Hi Nav,
I'm happy it's working now. Your interpretation is correct. Transport mode IPSEC encrypts the payload, while tunnel mode figure the whole ip packet (original header / payload) and inserts a new ip header. Thus, the tunnel mode is used for ipsec site to site VPN and transport is used for point to point VPN ipsec. GRE is used with ipsec, all packages will be encapsulated with a GRE header first, so, essentially, this is a point to point VPN ipsec.
The problem that you are having with tunnel mode, the router's package is going to be wrapped with the header 192.168.248.253 GRE source 217.155.113.179 destination. The whole package is then encrypted and a new header is added with the same source/destination. This new header will be coordinated by the FW, but not incorporated or encrypted GRE header. When the packet arrives at Router B, after decrypt them the package, router B will see the GRE header, which is different from that of source/destination tunnel she uses. This breaks the GRE tunnel and the routing between router A and router B Protocol.
HTH,
Lei Tian
-
OK my forehead is painful to all keyboard strokes that I know that it must be something simple, but I am brand new to the SAA. I had a site to site VPN configuration via routers 1751 that worked very well, but we're looking to add some more remote field offices, and I felt that it would be easier to maintain several sites is on the ASA 5510. I have the VPN configured on the SAA and he said that the tunnel is up. I can telnet to the ASA and ping the remote gateway on the even side of VPN and it pings fine. If I try to ping on a local computer, I get a "Request timed out". If I makes no changes apart from go to the computer room and replace the network cable the 1751 and then through the 1751 I can now ping the remote door way to my computer. The remote router works obviously very well, my statement of route on my router for vpn push through the ASA (same ip address) IP traffic that has been used by the 1751 works obviously. It seems so just like ASA is not being pushed in the ethernet0/0 VPN traffic or at least it is not encrypted. I also noticed that the ACL for NAT seems to increase in number of access either it seems, there is really just one small thing missing to make the ASA except and encrypt incoming traffic on ethernet0/0:
My network is not configured with a DMZ is something like that, the ASA ethernet0/0 and my local network on the same subnet:
Router (Cisco 2811)
|
Layer switch 2 (ProCurve)
| |
ASA5510 LAN computers
I'm trying to except both sides of the VPN in and out on Ethernet0/0 traffic I saw there was a framework for this "permit communication between VPN peers connected to the same interface' and I've activated this option.
In short, I need to understand why the VPN tunnel shows that upward and I can ping the remote of the SAA, but peripheral gateway on my network can not ping to the remote gateway through the int Ethernet0/0 on the SAA.
From the console of the ASA, I get this:
ASA5510 # ping 192.52.128.1
Send 5, echoes ICMP 100 bytes to 192.52.128.1, wait time is 2 seconds:
!!!!!
Success rate is 100 per cent (5/5), round-trip min/avg/max = 100/108/120 msASA5510 # show crypto ipsec his
Interface: *.
Tag crypto map: * _map, local addr: 10.52.120.23local ident (addr, mask, prot, port): (10.52.120.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (192.52.128.0/255.255.255.0/0/0)
current_peer: x.x.x.204program #pkts: 9, #pkts encrypt: 9, #pkts digest: 9
decaps #pkts: 9, #pkts decrypt: 9, #pkts check: 9
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 9, #pkts comp failed: 0, #pkts Dang failed: 0
#send errors: 0, #recv errors: 0local crypto endpt. : 10.52.120.23, remote Start crypto. : x.x.x.204
Path mtu 1500, fresh ipsec generals 60, media, mtu 1500
current outbound SPI: C49EF75FSAS of the esp on arrival:
SPI: 0x21FDBB9D (570276765)
transform: esp-3des esp-md5-hmac
running parameters = {L2L, Tunnel}
slot: 0, id_conn: 1, crypto-map: * _map
calendar of his: service life remaining (KB/s) key: (3824999/3529)
Size IV: 8 bytes
support for replay detection: Y
outgoing esp sas:
SPI: 0xC49EF75F (3298752351)
transform: esp-3des esp-md5-hmac
running parameters = {L2L, Tunnel}
slot: 0, id_conn: 1, crypto-map: * _map
calendar of his: service life remaining (KB/s) key: (3824999/3527)
Size IV: 8 bytes
support for replay detection: YFrom my office on the 10.52.120.0 even the etherenet0/0 interface on the ASA network I get this:
C:\Users\***>ping 192.52.128.1
Ping 192.52.128.1 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.Ping statistics for 192.52.128.1:
Packets: Sent = 4, received = 0, lost = 4 (100% loss)C:\Users\***>ping 10.52.120.23
Ping 10.52.120.23 with 32 bytes of data:
Reply from 10.52.120.23: bytes = 32 time = 5ms TTL = 255
Reply from 10.52.120.23: bytes = 32 time = 3ms TTL = 255
Reply from 10.52.120.23: bytes = 32 time = 1ms TTL = 255
Reply from 10.52.120.23: bytes = 32 time = 1ms TTL = 255Ping statistics for 10.52.120.23:
Packets: Sent = 4, received = 4, lost = 0 (0% loss),
Time approximate round trip in milli-seconds:
Minimum = 1ms, Maximum = 5ms, average = 2msCount on VPN Tunnel ACL does not increase when I try to ping the address of the remote gateway.
Here is the running of the ASA configuration:
ASA Version 7.0 (2)
names of
!
interface Ethernet0/0
nameif InsideNetwork
security-level 100
IP 10.52.120.23 255.255.255.0
!
interface Ethernet0/1
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
Shutdown
nameif management
security-level 100
IP 192.168.1.1 255.255.255.0
management only
!
activate the encrypted password of XXXXXXXXXXXXXXXX
passwd encrypted XXXXXXXXXXXXXXXXXXX
ciscoasa hostname
domain default.domain.invalid
passive FTP mode
permit same-security-traffic intra-interface
Access extensive list ip 10.52.120.0 InsideNetwork_nat0_outbound allow 255.255.25
5.0 192.52.128.0 255.255.255.0
Access extensive list ip 10.52.120.0 InsideNetwork_cryptomap_20 allow 255.255.255
.0 192.52.128.0 255.255.255.0
pager lines 24
asdm of logging of information
management of MTU 1500
MTU 1500 InsideNetwork
management of the interface of the monitor
the interface of the monitor InsideNetwork
ASDM image disk0: / asdm - 502.bin
don't allow no asdm history
ARP timeout 14400
NAT (InsideNetwork) 0-list of access InsideNetwork_nat0_outbound
Route InsideNetwork 0.0.0.0 0.0.0.0 10.52.120.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00
Timeout mgcp-pat 0:05:00 sip 0:30:00 sip_media 0:02:00
Timeout, uauth 0:05:00 absolute
Enable http server
http 192.168.1.0 255.255.255.0 management
http 10.52.120.0 255.255.255.0 InsideNetwork
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
card crypto InsideNetwork_map 20 corresponds to the address InsideNetwork_cryptomap_20
card crypto InsideNetwork_map 20 set peer x.x.x.204
InsideNetwork_map 20 transform-set ESP-3DES-MD5 crypto card game
InsideNetwork_map InsideNetwork crypto map interface
ISAKMP enable InsideNetwork
part of pre authentication ISAKMP policy 10
ISAKMP policy 10 3des encryption
ISAKMP policy 10 md5 hash
10 2 ISAKMP policy group
ISAKMP life duration strategy 10 86400
Telnet 10.52.120.0 255.255.255.0 InsideNetwork
Telnet timeout 5
SSH timeout 5
Console timeout 0
management of 192.168.1.2 - dhcpd address 192.168.1.254
dhcpd lease 3600
dhcpd ping_timeout 50
enable dhcpd management
tunnel-group x.x.x.204 type ipsec-l2l
x.x.x.204 group of tunnel ipsec-attributes
pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
Policy-map global_policy
class inspection_default
inspect the dns-length maximum 512
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
!
global service-policy global_policy
Cryptochecksum:7e478b60b3e406091de466675c52eaaa
: endI haven't added anything to the config except what seemed necessary to get the job of VPN tunnel. It should be fairly clean.
Thanks in advance for any help... I really hope that it is something really simple as a recruit ASA just forgot
Strange, but good news. Thanks for the update. I'm glad everything is working.
THX
MS
-
IPsec site to Site VPN on Wi - Fi router
Hello!
Can someone tell me if there is a router Netgear Wi - Fi that can form IPsec Site to Site VPN connection between 2 Wi - Fi routers via the WAN connection?
I know that this feature exists on the Netgear firewall, but can you have the same function on any Wi - Fi router?
See you soon!
Michael
I suspect that.
Thank you very much for the reply.
See you soon!
-
Site to site VPN, I need all internet traffic to exit the site.
I have 2 sites connected via a pair of SRX5308
A = 192.168.1.0/24
IP WAN = 1.1.1.1
B = 192.168.2.0/24
IP WAN = 2.2.2.2
Now what I need to do, is to have all traffic from B to go to the site one even traffic destined to the internet. That is, I need internet traffic out of our network with the IP 1.1.1.1, even if it is from the network B.
On my I have set up a route 1.1.1.1 of the ISP, then a value by default 0/0 to 192.168.1.1 it ASA knows how to get to the peer VPN is a more specific route, but sends everything above the tunnel, at the remote end which then hairpin of ASA routes internet outside its own WAN port traffic.
I can understand though not how to so the same thing on the pair of SRX5308 they either don't raise the tunnel or internet route to the local site address B.
Anyone have any ideas?
I need to do this because we are logging and monitoring of internet traffic to A site via tapping from upstream to various IDS solutions and will not (cannot) reproduce this to all our remote sites.
Thank you
Dave.
After some more thought and testing I came up with a workable solution to my own problem. I'll share it here in case it can help others.
(1) use the wizard at both ends to implement a normal VPN that connects the two segments of network 192.168.1.0 and 192.168.2.0
(2) go to site VPN - VPN policy remote router192.168.2.1 and click Edit
(a) disable Netbios
(b) select "None" from the drop-down list the remote IP address.
(c) to apply the change
3) go to the VPN-> VPN policy on the head end site (192.168.1.1) and click Edit
(a) disable Netbios
(b) select "None" from the drop-down list the local IP address
(c) to apply the change
Now all the traffic wil go down the VPN tunnel and exit to the internet on the site of head end. Hope this helps others with the same question.
-
I have a VPN site-to-site existing on Azure and Azure a new subnet created on the local network that must be able to reach.
I added the new subnet within azure for the VPN and add a static route on the RRAS server win 2012 for routing.
On the initial installation of a RRAS-Site VPN site (I didn't configure it) I think the interesting traffic specified must be sent through the VPN Tunnel, but I knew how to specify the new subnet via RRAS, I don't want to delete and re-create the VPN Site to Site.
Y at - there anyone who can help please.
Thank you
Philippe
Hello
Your question is beyond the scope of this community.
I suggest that repost you on the Azure MSDN Forums:
https://social.msdn.Microsoft.com/forums/azure/en-us/home?category=windowsazureplatform
TechNet forums Azure:
https://social.technet.Microsoft.com/forums/azure/en-us/home?category=windowsazureplatform
TechNet Server forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
TechNet forums:
https://social.technet.Microsoft.com/forums/en-us/home
MSDN forums:
https://social.msdn.Microsoft.com/forums/en-us/home
See you soon.
-
Access to the Windows Update site 0x8024402C error code failed?
Access to the Windows Update site 0x8024402C error code failed? Regds, 'a journey of a thousand miles begins with a first step."
Resolution: 0x8024402C error Code
- Open Internet Explorer.
- On the Tools menu, click Internet Options.
Note If the menu is not available in the Internet Explorer window, press the ALT on the keyboard to display the menu.
- Click the Connections tab and click LAN settings, and then click Advanced.
- Remove all the entries in the Exceptions section, and then click OK.
- Close Internet Explorer.
- Click Start, run, type cmd, and then click OK.
- Type the following commands. Press ENTER after each command.
- proxycfg d
- net stop wuauserv
- net start wuauserv
- Try again to install updates.
Windows Vista and Windows Server 2008
- Open Internet Explorer.
- On the Tools menu, click Internet Options.
Note If the menu is not available in the Internet Explorer window, press the ALT on the keyboard to display the menu.
- On the Connections tab, click LAN settings, and then click Advanced.
- Remove all the entries in the Exceptions section, and then click OK.
- Close Internet Explorer.
- Click StartThe collapse of this image enlarge this image
, and then type cmd in the box start the search.
- In the list of search results, right-click on Cmd.exe, and then click Run as administrator.The collapse of this image enlarge this image
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
- Type the following commands. Press ENTER after each command.
- netsh winhttp reset proxy
- net stop wuauserv
- net start wuauserv
- Try again to install updates.
Method 2: Enable the option "Automatically detect connection settings" in Internet Explorer to do this, follow these steps:
- Open Internet Explorer.
- On the Tools menu, click Internet Options.
Note If the Tools menu is not available in Internet Explorer, press the ALT key to display the menu.
- On the Connections tab, click LAN settings.
- Click to select her automatically detect settings check box, and then click OK.
- Try to install updates again.
Kind regards
Sohail Patel Regds, 'a journey of a thousand miles begins with a first step."
Maybe you are looking for
-
Start (and maybe getting a few new messages) all I can do is select a folder or some messages from Inbox, which appears correctly.After that, I can't(1) make an operation on the selected mail (delete, move)(2) select another folder(3) an option in th
-
For about a month now, our wi - fi is very slow and make it worse. We noticed it on our iPhones and iPads in particular. I use an Apple's Time Capsule airport for my network and we have internet optical fiber to 100 MB, so not needed or used modem. W
-
Why did you have to change the layout of Firefox?
I would like to know why you've gone and changed the provision in the Firefox? I'm still on Fx 3.6.18 because frankly 5.0.1 is horrible. Why did you have to change everything and make a difference. Why couldn't you have given us the same layout as 3.
-
Satellite P100 - 160 PSPAA: grainy effect on screen
Hi all I just bought a brand new P100-160. I bought the laptop mainly for its specifications and screen size / quality, however, it seems to be a weird effect on the screen. However, to tell you the truth, it's hard to describe, I would say that it's
-
I did a full install of win7 from vista on my hp Pavilion a6250z desktop which has deleted my preinstalled software that came with the computer. They told me to go to hp and run detection system to reinstall the software, but after a lot of research