Sites only show that connected primary vcenter.
Hello. I'm under SRM with vCenter 5.1 5.1.1 update 1. Primary and secondary sites separated by a physical firewall. I followed the KB on ports:
http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC & externalId = 1009562
I tested with telnet and I can connect successfully to SRM primary vCenter over 80 remote and vice versa remotely SRM to primary vCenter. Each vCenter can communicate successfully with their own local server of MRS. more 8095. In the primary vCenter, I am able to successfully establish the reciprocity, and after that I am prompted for the remote vCenter creds, I see both sites successfully connected.
Now, when I jump on the remote vCenter (recovery site) I'm able to establish reciprocity between the two sites, but when the prompt to enter creds for the remote vCenter (main site), I get an error that comes up as "Impossible to connect to the remote server.
Not sure where the problem lies. Any help most appreciated.
Thank you
Hi Stefan. Thanks for the reply. Only, I solved the problem. I asked our guys to firewall to create a rule to recovery side vCenter for the side protected vCenter via port 80/443. Yes, for vCenter vCenter. As soon as this rule, he creates my side recovery shows two connected sites. Now, the strange thing is that under knockout of SRM firewall rules, there is no vCenter vCenter rule to:
http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC&externalID=1009562
The only reason for which I asked him to add this rule was because for some reason that was open from protected to recovery (port 80/443) vCenter vCenter and the side protected SRM plugin has been successfully showing as connected. Probably a good idea to include this item for later use.
Thank you
Tags: VMware
Similar Questions
-
Essbase different aliases of shared member showing that the primary member
I have another hierarchy with shared members. When I retrieve a particular Member in Essbase, the alias is correct. But, when I explore the alternate hierarchy, takes the alias for the same Member of the Member below.
Thus, in the main member of XX - alias "XX_Member".
Member XXA - aslias "XXA_member".
When I pull a recovery, Essbase, in substitution proposal, is showing as
Other Parent
Member of XX (Shared) with alias XXA Member
EAS has the correct alias. So, when the add-in essbase foregoing, EAS shows member (shared) with alias XX XX. It's ONLY the Essbase recovery that shows that this badly.
There is only one table alias in the database. The problem does not occur with all shared members. No idea what could be casuing it?ASO has a really strange behavior, without papers, regarding metadata, properties are returned by members in situations of implicit sharing (which is what you have, if the child is not marked never 'share'). The "Never share" tag is the child?
-
Please can someone help?
My catalogue LR4 suddenly started showing pictures to folder and subfolder level 0 and only shows the correct number of images at the file level.
Your help would BE welcome.
Thank you.
Click on the sign in Control Panel folder + and check "display the Photos in subfolders.
-
Switched to old tower iMac HD space for iPhoto. Assistant responsible all Migration kindly off except CC HD programmes. External Adobe refused to work, insisting that they had to downloaded again.
Download site shows only CS4 CS5 and CS6. So what I pay hundreds of dollars a month for?
You can download the office software Adobe Creative Cloud | Adobe Creative Cloud
-
I was make failure messages can not be updated Win Vista only indicated on YOUR site 8007371C error Code is 80073712
Benn has been trying for a few months. July 12 last day to support. Sent me him to all sorts of places to read things, nothing helps.
Update fails: kb971029
Error code: 8007371C NOT 80073712
Hi ChuckEva,
Check to see if this article helps you.
-
I can't connect to the Internet via the wireless network. It shows that I have local access only. I can't connect even in SafeMode with network. I have Ping www.microsoft.com and the answer is "ping request could not find host www.microsoft.com. I am connected to the network wireless through my iPad and can connect via my smartphone. This leads me to believe there is only something configured properly on my laptop. Can anyone provide assistance?
Hello
You can try a system restore...
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
.. .choose time, until this problem (you may tick to show more older restore points).
Tricky
-
Hello, I do subpages in Muse with a vertical menu by hand, now my problem is that when I saw the site and I'm on the subpage, the menu of head only shows the active state. How can I solve this problem?
Please check is submenu is linked to the home page, as any content or anchor bound.
If still the same issue, after screenshot of the design mode and preview mode.
Thank you
Sanjit
-
I can connect only partially. The sign continued to show and I can't activate the mobile link. On the Help menu, it shows that I am connected. Adobe has support people or only computer guessed help?
Download, installation, setting up for the Installation of Acrobat & day out> -
V32.0.2.
It is certainly not my experience.
Have you changed your configuration before you post? Your "more details of the system" seems to show that you have configured to automatically start in private browsing mode, you can select in the Firefox Options:
"3-bar" menu button (or tools) > Options > privacy
If the value is "Firefox will: don't remember history ' change the dropdown to" Firefox will be: use the custom settings for history "to reveal the current configuration.
What is the box ticked for "always use the private browsing mode"?
If Yes, then what you have found is logical: private windows share a pool of "session only" cookies separate Windows non-private, and you have all the non-private with automatic private browsing windows.
-
Hi, I paid the subscription to muse, received confirmation 7 hours ago, but the subscription is only showing on the site not on the creaitve cloud. I need urgent help for a period
Hi Se80799442,
Adobe trial and purchased applications are same, if you are showing that the trial has expired it would be a mistake to solve this, you can check the link below:
( Make sure you use the same Adobe ID / Email ID that you used to purchase the subscription )
Download the creative application of cloud from here: Download Adobe Creative Cloud apps | Adobe Creative Cloud free trial
Connect and disconnect activate Cloud Creative applications
If it does not help him follow the link below
Adobe Creative Cloud apps back in test mode after 2015 set CC to update
* NOTE: Make sure that your firewall of your computer or security software firewall does not block Adobe, if you are not sure of it then just turn off the firewall for awhile disconnect you and you connect on the creative application of cloud and check.
Let us know if that helps.
-
It is always used to be an indicator at the bottom of the screen (I think) that looked like a small lock, to show that you were in a secure session. What happened in Firefox V8?
Credit Safebrowser
Therefore, the lock is more part of Firefox; It has been removed from Firefox 4. The padlock shows that there is a secure connection, but does not provide any additional information. You could make a typographical error, and have always been connected to a secure connection. The lock was replaced in Firefox 3 with the Site identity button. Familiarize yourself with the Site identity button at the left end of the address bar:
https://www.mozilla.com/en-US/firefox/security/identity/ https://support.mozilla.com/en-US/kb/Site+Identity+Button http://www.dria.org/wordpress/archives/2008/05/06/635/
You can install this module if you want:
https://addons.mozilla.org/en-US/firefox/addon/padlock-icon/
-
My iPad and iPhone will be printed using AirPrint on my printer HP Deskjet 2540 for about 40 minutes and then will not be able to find all of the available air printers. No idea why. The deskjet printer shows that there is a wireless connection.
Hi Mpsfeldt,
Thank you for using communities Support from Apple!
Your question, it looks like you are only able to use AirPrint sporadically. We know that situations of this kind can be frustrating, but we are here to help.
To begin the process of solving problems, I suggest you to read about the section If you can not print on your printer AirPrint in the following article.
Best!
-
Hello
I've recently updated to Windows Vista 64-bit for Windows 7 64 bit. After the upgrade, I noticed that Firefox is the only program that allows me to connect to the internet and surf the web. Windows updates not connecting not (error 80072EFD) and any other program that tries to connect to the internet fails. Also, when I install the updates to Firefox, Firefox is no longer will connect; I have to do a system restore to an hour before the updates of Firefox in order to get online. I searched the web relentlessly trying to identify the problem and tried the steps recommended on these sites: http://www.online-tech-tips.com/windows-7/windows-7-cannot-connect-to-internet/ and http://social.technet.microsoft.com/Forums/en/itprovistaie/thread/8777663d-013c-47b8-b11a-0e890612b533 and http://social.technet.microsoft.com/Forums/en-US/w7itprogeneral/thread/32593406-f0af-449d-9cfd-3be3827fbf30
Help, please!
Start with http://windows.microsoft.com/en-US/Windows7/why-can-t-i-connect-to-the-internet
You may encounter temporary connection [e.g. 0x80072EFD] errors when you use Windows Update or Microsoft Update to install updates
http://support.Microsoft.com/kb/836941For better assistance, post in this forum: http://social.answers.microsoft.com/Forums/en-US/w7network/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
I have fixed everything at the time of my desktop computer starts up to a screen black with no explorer.exe running (the explorer.exe running only showed a folder at a time, until I restarted it.) and now I have a connection problem.
My netgear router has a connection with my computer, it shows green in the taskbar. However, my actual connection to the internet is not as lucky as the connection with the router.
I see the networks that I am able to connect to, but as soon as I did, I said that I am not currently connected to any network. If I go to "Connect to a network" I see clearly that I'm "connected with limited access" to Snet-G, which is one of the networks available to connect.
In my options of netgear, I am also connected to Snet-G, and it shows that it is actually connected.
My problem is the fact that I can "ipconfig" and I find none of my information, and when I try to ipconfig/all, it gives me an error something while not connected, so it says that I'm connected and does not, at the same time. My local internet does not work (can not navigate to 192.168.1.1 and others), and of course for this reason, my global internet does not work.
I need a fix for this, because I just put a ton of subscriptions for this month, which are already paid, and if I can't use this month is a good slice of $50 trash just because I fixed something.
Thanks, that's a well advanced topic.
I tried the following:
System Restore (6 days back, the problem started 2 days ago)
Restarting the computer
Unplug modem (30 seconds)
Restarting the router/Reset
Connection to the Snet-N instead of the Snet-GThings to take note, if you do not already consider: I can't connect to my router config (192.168.1.1), my computer says I am connected locally, but not in the world.I have some information about the modem if necessary.-I have restored my computer 6 days ago, but only changed my problem with explorer.exe back. Internet broke again-. -.Hello
Method 1:
I suggest you to follow the links and check out them.
Windows wireless and wired network connection problems
Network connection problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
The problems of Internet connection
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems
Method 2:
I also suggest that you see the link and search for connected with limited access
Message when a device on a Windows Vista-based computer uses a network bridge to access the network: "connected with limited access".
-
Connected to the new router, but locally only.
Currently, I installed a new router (Netgear N300) wireless and my laptop is the only computer that does not connect to the internet. The small icon to the left of my screen says only: ACCESS: LOCAL ONLY.
BASICALLY,.I have Windows Vista Home Premium, notebook Compaq (Presario CQ60 to be exact)
I can connect if I use a cable, but its disadvantages.
I can connect wirelessly with my PC and Ipad. and Internet access.
I TRIED:
Various patches microsoft such as resetting TCP, safe mode with network, reset the router. »Thank you in advance and we hope you can answer this soon!
I use an Atheros AR5007 802. 11 b / g WiFi Adapter(Compaq laptop) for the moment so this is useful. Thanks again!
Someone suggested that I update my wireless driver. I am open to this idea, if anyone can find a safe and legal site with the download.Hi Bryyaan11,
You can check out the link to HP support and try to download the drivers for your wireless card updated:
For more information, you can also consult the following article:
Updated a hardware driver that is not working properly
You can also check the following items and try the steps:
Windows wireless and wired network connection problems
Solve problems, find wireless networks
Hope this information is useful.
Maybe you are looking for
-
Replace the user folder?
I had a drive hard failure and then spent two days time Machine * (restore failed over and over again) before finally giving the place and moved manually on my supported up to data (ugh). I moved on my user folder, but it is not recognized in the sys
-
I can move video from Sony DCR-SR42 files to a memory stick?
Please show me how to move a movie from a disk file to a memory stick Sony DCR-SR42 hard. Thank you.
-
Satellite A100-201 stuck after enabling hibernation mode
My computer is an A100-201 and its dead end hibernation. I read the advice others have written, but I can't get it back to normal. He was weak in power then start to Hibernate / hibernation. by pressing the key power dosen't work I need help. Please
-
B540 TDR and black screen on startup
Hi all, I bought a B540 in April a power works fine until end of July when it began to show the error "display driver has stopped working and has recovered." a few days later I let him (I have need as a wifi station to connect devices remove) and aft
-
HIT KIT necessary verification
Hello I just wanted to check that I need in fact the HIT Kit do with a PS6000 MPIO. Currently without the HIT Kit tools, I see 1-way via my iSCSI Initiator on my Server 2008 R2. The target that I discovered is the IP of the group. My understanding