Failure messages can not be updated KB971029 Win Vista on YOUR site only showed 8007371C error Code is 80073712

Similar Questions

• I have a late 2009 iMac. When I tried to upgrade to El Capitan. He said that the CHIP shows the h/d is a failure and can not be updated. I have install an external withEl of h/d Cap but it is very slow. the h/d is USB 3 but the iMac's USB 2. the h/d is on

  I have a late 2009 iMac. When I tried to upgrade to El Capitan. He said that the CHIP shows the h/d is a failure and can not be updated. I have install an external withEl of h/d Cap but it is very slow. the h/d is USB 3 but the iMac's USB 2. the h/d is only 5400 RPM. a 7200 RPM 7 / would accelerate the iMac?

  No, because the limiting factor is the computer is USB 2.0, which is how it connects any external drive apart the external drive. As USB 2.0 is much slower, there is no real advantage to a 7200 RPM drive. What you need is a Firewire enclosure that supports FW800 which is much faster than USB 2.0.

• Update for Windows Vista Service Pack 2 (KB948465) repeatedly fails - error Code 80246007

  Update for Windows Vista Service Pack 2 (KB948465) repeatedly - fails error Code 80246007.  BITS ok - Microsoft 'Fix' detected 'problems' and 'fixed '.

  them, but the update continues to fail.  Any help would be appreciated.

  Hello

  Perform the steps from the link below and see if it helps.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  Hope this information helps.

• Can not install updates in windows vista

  Windows vista tries to download updates, but fails to do so. The following message if poster - updates are not configured properly restoring changes. Updates that all start with Ko. The computer had tried to download the same updates many times. My computer has sp1, windows vista premium 32 bit.

  Hello

  You can hide unwanted updates in windows update.

  Check out the link: http://www.petri.co.il/hide_updates_windows_vista.htm
  Thankx

• Windows Update 80070490 Windows Vista Home Premium 2007 Service Pack 2 error code

  I've had this problem for a few months now and I don't feel not secure using my computer without windows update.  I tried the system preparation tool and who does not so that the Windows DVD to repair came with my laptop.  It is said that my upgrade is «Disabled update»  He wouldn't let me even mouse over it because it doesn't work.  I also tried the Auto store but that did not work.  Help, please!

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

• Update for Internet Explorer 8 Compatibility mode list for Windows Vista (KB982632) cannot install with the error details: Code 80070490 & also update for Windows Vista (KB981793) with the details of the error: Code 80070490

  I am running windows vista Home premium, on a system 32-bit HP Pavilion dv9700 op.  I have internet project 8 service pack 2 of windows and norton security suite installed on my computer.  I do not understand why these 2 updates keep do not install unless it didn't, but they are listed under important updates in the windows updates, can you please help me, maybe I don't have not enough memory on the left?

  Thank you!

  Windows Update error 80070490

  If you receive the Windows Update 80070490 error, it means that a file (CBS Manifest) that is needed to install updates is corrupt. To correct this problem, you will need to repairWindows. RepairingWindows will not damage your personal files or the programs that are installed on your computer.

  The System Update Readiness Tool for Windows can correct some conditions that causeWindows Update error 80070490. You can access and run this tool by reading this http://support.microsoft.com/kb/947821 on the Microsoft Web site.

  If the system update readiness tool solves the problem, you need to repairWindows. RepairingWindows will not damage your personal files or the programs that are installed on your computer.

  Once you have completed the repair, you will need to restart Windows Update to install updates are not included on the installation DVD. RepairWindows, follow these steps:

  1. Close all programs and restart your computer.

  2. Insert the DVD into your disc drive. Wait for the installer to start. If the installation program does not start automatically, follow these steps:

     1. Click on start and type Drive: \setup.exe in the search box. ReplaceDrive with the letter of the DVD drive of your computer (for example, D:\setup.exe).

     2. List programs, click Setup.exe.

  3. Click on install now.

  4. Click go online to get the latest updates for installation (recommended).

  5. If you are prompted to do this, type the Windows product key.

  6. What type of installation you want? window, click upgrade.

  7. Once the installation is complete, restart your computer, and then run Windows Update.

  If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Problem Update KB 915597 (Vista OS) Def 1.75.924.0; Error code 8. in the device mgr I get a code 31 test (6T 04) network card driver is correct. What is the solution?

  Tried a bunch of things, no luck. Cannot download 915597 KB, it still fails.

  Hello
   
  This problem occurred because of the conflict between the present security software on the computer and the update.
   
  I suggest to install the update KB915597 via a stand-alone package, please follow the steps below:
   
  Step 1: first, disable security software, follow the steps mentioned below
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Activate the security software once everything is done.
   
  Step 2: Create a system restore point. Search for steps create system restore points in the link below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
   
  Let us know the status of the issue for further investigation.

  Step 3: Follow this link below to download and install the latest definitions for Windows Defender manually

  http://www.Microsoft.com/security/portal/definitions/HowToWD.aspx
  
  
  http://support.Microsoft.com/kb/923159/

  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• Can not download updates for Internet Explorer 8, tried same safety stop...

  Can not download updates for Windows Vista Internet Explorer 8, just says code error 80072efd, I tried one at a time, stop my security program... I think that I have NO exp. 8, but he insists that I do! These updates will not GO AWAY! Help!

  http://support.Microsoft.com/kb/836941

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates

  Error 0 x 80070008	Error 0x800705B4
  Error 0x8007000E	Error 0x80072EE2
  Error 0x80072EFD	Error 0x80072EE7
  Error 0x80072EEF	Error 0x80072EFE
  Error 0x8024400E	Error 0x80072F76
  Error 0 x 80244016	Error 0x80072F78
  Error 0 x 80244022	Error 0 x 80090305
  Error 0x8024402F	Error 0x8009033F
  Error 0xC80003FA	Error 0 x 80244008
  Error 0xC800042D	0x8024400A error
  Error 0x80071A90	Error 0x8024400D

  Mick Murphy - Microsoft partner

• I can not uninstall Silverlight and therefor can not install update continue to receive messages to

  I can not uninstall Silverlight and therefor can not install update continue to receive messages to do and it makes me nuts HELP!

  See this: How to clean a facility damaged Silverlight and then reinstall Silverlight

• Can not get updates more (error Code 80080005)

  original title: can not get updates any longer

  Have not been able to get updates since January.  Get the error code 80080005, but there is no solution for it.

  Error code 0 x 80070005 is also described as ACCESS DENIED (you may not to install updates).

  Please check that you are logged into an account with administrative privileges.

  Please follow these instructions if you encounter this error code during checking or install updates via Windows Udpate.  What follows applies only to Windows Vista.

  1. Download AccessChk (Sysinternals).  This tool allows you to assess the level of access of some users or groups of resources, including files, directories, registry keys, global objects and Windows services.  Here is the link to download the tool: http://technet.microsoft.com/en-us/sysinternals/bb664922.aspx

  2. Save the file on your desktop zip and extract the file:
     -Right-click on the file and select extract all...
     -Click Next when prompted for the Destination.

     Therefore, you should see a folder called AccessChk on your desktop.

  3. Open the folder AccessChk

  4. Hold the SHIFT key and right-click in the window.  Select "open here command prompt.

  5. A command prompt window should open a similar message:
     C:\Users\\Desktop\accesschk >

  6. Type the following command and press ENTER:
     "" AccessChk.exe "nt service TrustedInstaller" s - n k ' hklm\software\Microsoft\Windows\CurrentVersion\Component Based Servicing "> accesskchk.txt
     Tip: You should be able to copy and paste the command into the command prompt.

  7. Close the command prompt window.  Open the Accesschk folder on your desktop (if it has been closed).

  8. Double-click Accesschk.txt (text file), it should open Notepad.

  9. Copy and paste your results with a new question in the forum of Windows Update.  (Make sure that you write 0x80070005 in the subject).

  Reference1

  If this is not enough: -.

  1. If please download the subinacl.msi from the following link and save the patch to installation on the desktop:
      
     http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads
     SubInACL (SubInACL.exe)
     SubInACL is a command line tool that allows administrators to get the security information on files, registry keys, and services, and the transfer of information from one user to another, from local or global group to and from a domain to a domain.

  2. Please, go to the desktop and double-click on the downloaded file.

  3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.

  4. Click the "Start" button in the "Search" bar, type: "Notepad" (without the quotes) and press ENTER.

  5. Copy the following commands, and then paste them into the opened Notepad window:
      
     off @echo
      
     Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
     Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
     Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
     Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f
     Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
     Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
     Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
     Subinacl % lecteur_systeme % /subdirectories / Grant = system = f
      
     @Echo =========================
     Completed @Echo.
     @Echo =========================
  
  @pause
• After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.
• View the desktop and right click the reset.bat file, then choose "Run as Administrator".
• You will see a window of type BACK treatment.
   

NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."

Reference2

This problem may be caused by third-party security programs such as firewalls and antivirus software. You can disable or remove to check the issue.

• Error message: can not find script file "c:\". WINDOWS 32\system\windows.db»

  Original title: error message: can not find script file "c:\". WINDOWS 32\system\windows.db» Help!

  After starting my Vista laptop, I get the error message: can not find script file "c:\". WINDOWS 32\system\windows.db» The mouse cursor freezes and I can't do anything on the PC. The PC will run in Safe Mode help!

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• I can not install updates for photoshop and the product is registered and properly installed

  I can not install updates for photoshop and the product is registered and properly installed cat. I tried and they were worthless, this system I get when I click on the button in the error message customer support https://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-qualifying-product.html

  Customer chat was worthless, and I am really frustrated.

  You can download and install updates,

  Adobe - Photoshop: For Windows: Adobe Photoshop 12.0.4 updated for Adobe Photoshop CS5

  http://www.Adobe.com/support/downloads/detail.jsp?ftpID=5373

  But if you have a complaint about your serial number, chances are that they thought that it was hacked and blacklisted. You can't be at fault, you simply a forgery.

  Nothing can be done if this is the case.

• Want to Phoenix 850-150qe: program file can not be updated as a not enough space on the new computer

  I have a new computer with disk 3 TB initially space.  I have now available 2.60 TB.  I have this simple little card game that has an update of 207 MB of available space required.  Whenever I try to load it, it says "program file can not be updated because of insufficient disk space".   The original game loaded just fine but not the update.  I wrote to the company that has given me a standard introductory text on turn off my antivirus which is nothing to do with my problem.  Someone else has encountered this and if yes, what is your work-around?  I am trying to load it on the C drive with my game so am loading at the right side of the road.

  I solved my problem.  I went back to my computer and I went back to my reliable want 700-074 also having windows installed 10.  My little program works very well and I was able to update the program.  This program was one of the many problems with this computer.

• I can not install some drivers Win XP for Portege M100

  I can't reinstall everything for win xp sp3

  1. bios shows incorrect version

  2 atheros 7.7 recognizes the mini pci card

  3 bezel Digital video says I need additional files

  4. audio drivers says that I have to install bus drivers

  I have installed chipset and toshiba common files

  Hello

  On the European driver Toshiba page, you can find the Portege M100 drivers.
  There is also an installation instruction that follows you.

  The common Modules must be installed at the beginning. The BIOS is not possible without the common Modules.

  The Atheros WLan driver doesn t work because your Portege M100 could use another card WLan M100 supports different Wlan cards and, eventually, M100 was equipped with Intel or other card Wlan

• Can not get updates Windows 7, error code 646

  Windows updates fail almost always error code 646 today.

  Other error codes are application error 100, event id 1000 and mshtnl.dll (registry errors?)

  8 Windows Explorer has stopped working properly, running on windows 7

  There has been a change in the health of windows, event 42

  Here are some of my problems

  * original title - can not get updates, Windows 7 instead of 8 as its supposed to, registry errors *.

  Code error '0 x 80070646', '646', or '1606' when you try to install the Office updates

  http://support.Microsoft.com/kb/2258121 releasing It Easy: with Windows | ActiveWin | Laptops | Microsoft MVP