Similar Questions

• How to increase the value of the queue for a server to avoid errors

  In the RESOURCES section of a config of ubb, "MAXQUEUES 700" stand for all servers queue or queue on each server?
  
  Because there are a lot of "ERROR: the Message Queue blocking warned childbirth, Qaddr = 583902 ' for a server in ULOG, what should I change the value of the queue of this server to a higher value to avoid this error? Change the "MAXQUEUES? If increase the queue for a server?
  
  Thanks for your kindly reply.

  MAXQUEUES is used to specify the maximum number of queues - not number of messages on a queue of (each).

  To solve your problem of blocking, you might consider adding servers (to accelerate the responsetimes).
  Another option could make synchronous calls if it would make sense for some application that you design.

• What is a good way to use the queues for the model of consumers/producers?

  Hi all

  I am following the model of consumers/producers to use the queue to synchronize the following process: the producer is a loop to produce a number N, I will put each number generated in a table and after each 5 numbers generated, I put the table in the queue and pass it on to the consumer. I have to wait the use by consumers of the data and it will then remove the item from queue so that producers will have the chance to produce another 5 numbers. As I put the maximum size of the queue one, I expect that the producer and the consumer turns to produce / consume all five numbers and the opportunity to another. Here is my code

  

  When the checkbox is false, the code will be

  

  For the first 5 numbers, product will generate every thing right and put it in the table, and it's going to pass the array to the quere so that the consumer will have the chance to loop through the table. I except the procude loop will continue only when the queue is available (i.e. all items are deleted), but it seems that once the consumer starts the loop loop of the product will continue (if the indicator x + 1 and x 2 will be changed to numbers). But this isn't what I want, I know there must be something wrong, but I can't say it is.

  dragondriver wrote:

  As you say in 1, sequency structure to enforce the order of execution, that's why I put it here, in this example, the simple question, I replace the complete code with increase in the number, in the real case, the first markers + 1 and + 2 must be performed in this order.

  Mikeporter says:
  1. get rid of all the structures of the sequence. None of them are nothing but apply a work order which would have been the same without them.

  So even if you delete the sequence structure, there will be a fixed & defined order and it is because LabVIEW follows the MODEL of FLOW OF DATA.

  Data flow model (more precisely in the context of LabVIEW): a block diagram node runs when it receives the required inputs. When a node is running, it produces output data and transmits data to the next node in the path of the data stream. The flow of data on the nodes determines the order of execution of the VIs and functions on the block diagram (click here for reference).

  Now in your code, just remove the sequence structure will not make you order will be going to stay the same, but you need to do some very minor changes (as thread of the error in loop, before that he go to the node "Élément Dequeue").

  Come to the main point: it's a good way to use the queue for the consumer/pmodel that?
  The model you are using (and qualifying as consumer/pmodel) is much too deviated from the original consumer/pmodel which model.

  dragondriver wrote:

  For the second, Yes, it's my fault for delete, though. I'm actually the example of model of producer/consumer design pattern, but I do not pay attention to the while loop in the part of the consumer.

  While loops (two producers & consumers) are the essential part of this architecture and cannot be deleted. You can start your code using standard model.

• I use outlook express 6 and I can receive an email of great but when I try to send it after making the necessary changes, i.e. the signature I get the message 'too big for the server.

  I use outlook express 6 and I can receive an email of great but when I try to send it after making the necessary changes, i.e. the signature I get the message "too big for the server" responses I've seen so far tell me absolutely nothing

  Well, the error message says it all.  "" too big for server".

  There is a limit imposed by your ISP/mail server, which you don't mention.

  Not only the servers have limits on the size, this is not necessarily the same for incoming and outgoing messages.

  If you say you use the e-mail program and the name of your e-mail server, maybe we can shed light on the more specific issue, but the problem is definitely with them and not Outlook Express.

  P.S. I'm not sure what you mean by 'signature'

• VSphere ESXi4.0 - need help upgrade and increase the size of disk to the server

  Hello

  I have the free version of the VSphere ESXi4.0, I'm looking to do 2 things:

  (1) Upgarde to the last free version of Vsphere. Can you point me to the upgrade of the software and the path correct upgarde?

  (2) I have 2 servers running in the machine.  One is a Windows 2008 R2. I need to increase the size of disk for this server. Currently, it is 144 GB. I need to increase it up to 260 GB. How can I do this? I tried to simply increase the size by increasing the C of this server disk Edition by the 40 to 80 GB VSphere client and D ranging from 100 GB and 200 GB drive [I'm running out of space]. But the Vsphere shows again that the orginial 140 assignment or not the new 280 Gb.

  Help, please. Thanks in advance

  You must go into Windows on the virtual machine and use the disk management tools to extend the volume. It is a two stage process where you first set the VM, then the second step is to adjust the windows.

• my calendar is stuck on "mobile timetables for the server account" after mountain lion update

  my calendar is stuck on "mobile timetables for the server account" after mountain lion update

  HOPE TO HEAR SOME ADVICE PLEASE :)

  1) go in your user library folder (~ / library). Hold down the option/alt key while accessing the menu Finder go.

  2) go to the calendar folder

  (3) delete all files that say "cache" (replace the your desktop in the case where you want to move them at least)

  (4) always in the user library folder, go to the Preferences folder

  (5) delete the com.apple.calendar.plist (on the desktop again)

  (6) restart your computer

• How can I set the default font size and type for the outgoing Hotmail mail?

  How can I set the default font size and type for the outgoing Hotmail mail?

  Hi Dale,

  What is the email client do you use?

  Outlook can be configured per - start Outlook-> Tools-> Options-> mail-> fixed Format and fonts... Select the font and size you need... Click ok on all screens.

  I hope this helps.

• MMC hangs with print server when I try to print a test page for the server. Windows Server 2008R2 Printer HP1606n

  MMC hangs with print server when I try to print a test page for the server.

  Windows Server 2008R2

  Printer HP1606n

  Signature of the problem:
  Problem event name: BEX64
  Application name: mmc.exe
  Application version: 6.1.7600.16385
  Application timestamp: 4a5bc808
  Fault Module name: hp1100su.dll
  Fault Module Version: 0.3.1.36655
  Timestamp of Module error: 4dba6516
  Exception offset: 00000000000159bd
  Exception code: c0000409
  Exception data: 0000000000000000
  OS version: 6.1.7601.2.1.0.272.7
  Locale ID: 1033
  Information additional 01:00 c 6
  More information 2: 00c62f6d4134d9a2c3306d7c5b5b94b0
  3 more information: c9eb
  Additional information 4: c9eba0fb841db4dab90b359385c03455

  The module that seems to be the cause of the accident is the hp1100su.dll:

  Fault Module name: hp1100su.dll
  Fault Module Version: 0.3.1.36655

  The hp1100su.dll is a part of the driver for the printer.

  What you could try is uninstalling and reinstalling the driver of printer using the version of HP.

  I believe that the following may be the printer:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&lang=en&LC=en&product=4110410

• Failed to retrieve the mappings for the server. Reason: null

  I get the following in the Console error when I add or update my server

  [oolocal], (07 / 14 at 04:40:11): server is available. Get the settings from the server to the server
  [oolocal], error, 07 / 14 at 04:40:12, impossible to fetch Server mappings. Reason: null
  [oolocal], error, 07 / 14 at 04:40:12, failed to get the logs directory. Reason: null

  Standalone CF8

  Webroot in c:\inetpub

  RDS works (so I can browse the datasource)

  Kind regards

  Aaron

  This problem is known. Failed to retrieve the mappings for the server. Reason: null. We fix it.

  Just to check the parameters are collected successfully from the server. Create the project and join the server to the same. CFM open and type must identify the data sources.

• Default icons only for the interactive report

  Hi all
  
  I develop a style app catalog and display of images in an interactive report; I can get the interactive report to show the icon when users visit the report the first time, the report is quite simple. It has a series of buttons for Sections of the catalogue and when the user presses the button he fills a hidden element that is in the where the criteria catalogue, all it works fine with one exception:
  
  1. when the user clicks on the button catalogue and interactive data in gear changes; report changes 'View report', I want to maintain state in "Fashion icon" is possible that someone knows how can I have the interactive report only display "icon.
  
  
  Thank you very much for your help in advance, I tried a couple of things and nothing... any help would be greatly appreciated.

  958442 wrote:
  Hi all

  Welcome to the forum: read the FAQ and the forum threads sticky (if you have not already done so) and update your profile with a real handle instead of '958442 '.

  When you have a problem, you will get an answer faster, more efficient including information as much information as possible from the outset. This should include:

• Full version of APEX
  
• Complete operating system DB, version, edition, host
  
• Architecture of Web server (EPG, SST or APEX listener/host operating system)
  
• Browser (s) and version (s) used
  
• Theme
  
• Model (s)
  
• Region/section type (s) (particularly as to distinguish if a 'report' is a standard report, an interactive report, or indeed a 'update report' (i.e. a tabular presentation))

  With APEX, we also had the chance to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproduce things is the best way to solve most of the questions, particularly those relating to the layout and Visual formatting. If you expect a detailed response it is appropriate that you take on an important part of the effort by getting as much as possible with an example of the problem on apex.oracle.com before asking for help on specific issues, then we can see firsthand.

  I develop a style app catalog and display of images in an interactive report; I can get the interactive report to show the icon when users visit the report the first time, the report is quite simple. It has a series of buttons for Sections of the catalogue and when the user presses the button he fills a hidden element that is in the where the criteria catalogue, all it works fine with one exception:

  1. when the user clicks on the button catalogue and interactive data in gear changes; report changes 'View report', I want to maintain state in "Fashion icon" is possible that someone knows how can I have the interactive report only display "icon.

  Thank you very much for your help in advance, I tried a couple of things and nothing... any help would be greatly appreciated.

  It also helps explain what you tried (even better, Show us what you have tried on apex.oracle.com).

  You can view the IR to the default icon via a dynamic Action: + {: identifier of the thread = 2187972} + (obviously using "ICON" rather than "RETAIL"...)

  However, do you really intend to make use of other interactive report features? It seems that the report display is controlled by custom buttons, rather than shares of IR (filters, control breaks etc.). If this is the case then a standard report based on a custom template may be a better option than to try to work around all that offer interactive reports.

• The help file for the interactive report - wwv_flow_utilities.show_ir_help

  Any way to change the page that appears when you click the help in the interactive report Menu (the train)... ?

  Hello

  Yes, for example by using jQuery.
  Sample here
  http://Apex.Oracle.com/pls/OTN/f?p=40323:63

  I have in the HTML page header

  Example use jQuery from Google.
  You can install jQuery on your own server.
  Here's a guide for this
  http://www.oracleapplicationexpress.com/tutorials/66-integrating-jQuery-into-apex

  BR, Jari

• HP 15 J8X12UA #ABA: what is the size of tip for the power adapter for laptop HP 15

  Can anyone provide the specifications for the tip of the HP 15 laptop power adapter? I'm looking for more details on the size.

  Thank you.

  Bill

  Reference number:

  45 W HP Smart AC adapter (NFPC, RC, 3-wire, 4.5 mm) 741727-001. 19.5V 2.31 HAS 45W

  Here is a picture with the dimensions of the cutting edge. If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  

• my window vista sp2 stop sending messages for the server http for e-mail hotmail from July 2010. What other opion should I now? I use window 8. my mother was the first owner of this laptop.

  My lap top is a window vista premium 6.0 sp2. so, as I believe that in July 2010 my connection email expired with the sp2 from window to the server with http hotmail .com I was trying out an important e-mail to a certain Department of the army and he was ejected back because of my direct window a stopover for hotmail http sites. So, what's my next step? This laptop that I use now for academic use belonging to my mother. I was'nt sure of what to click on in the troubleshooting list. Thks.

  Are what the hell you referring in Windows 8?

  Submit all Hotmail queries on the forum right here:

  Windows Live Solution Center
  http://windowslivehelp.com/

• setting up windows for the server pop3 or imap Charter of Kalamazoo messaging

  Charter of the server pop3 or imap to Kalamazoo

  need help to set up mail to windows mail

  Hello

  you need to configure your e-mail account windows mail with your ISP internet service provider

  They provide you with account settings you need to do

  Ask them to

  username
  password for your access broadband account / distance with them

  Server of incoming POP3 mail
  outgoing mail SMTP server

  and here's how to configure windows mail after getting the email correct account settings

  http://www.vista4beginners.com/Windows-Mail

• SAN HQ of credentials for the server

  I'm a bit confused as the HQ SAN server credentials...  I have installed and configured a new HQ SAN excecution 3.1.0 Server everything is in place and running in parallel to our 3.0.1 existing server.  I can run the app and authenticate with my creds Domain Admin of the server no problem (ie: not lessened connection).

  However, I installed the version of the client alone on my local machine (on a different domain).  When I run the application, I use the "run as" and use my creds admin area on the appropriate field.  However, this doesn't seem to be able to authenticate successfully with the 3.1.0 server.  So I find myself with the degraded connection.  error: "unable to establish a communication server. Please verify the credentials and try again.  Could not establish connection with the server; Check the credentials provided or contact the system administrator.  Apart from having degraded connection, everything seems to be speaking / communication.

  Also BTW - works very well with the same client that connects to the old server running 3.0.1 - no problem same field, same configuration creds, etc..  Any ideas?

  Found the question - firewall.  Correction of the problem allowed port TCP 8000 for domain as well as the public.