Skype crashes immediately after starting

Similar Questions

• Crashing immediately after starting

  Hello

  My computer crashes immediately after start upward. Sometimes I have the chance to actually click on something, but usually it will freeze just upward before I can do anything whatsoever. I'm running it in SafeMode right now and it works completely fine. Any ideas on what I can do?

  Follow these steps to exclude material failures.
   
  Type of memory in the start search box, and choose Diagnostic memory. This will
  take a few minutes.
   
  In computer discs right click and choose Properties, then the Tools tab.
  then click on check now. Check the TWO boxes and then click Ok. Reset. This will take
  from one day to the next.
   
  After running chkdsk (what does the foregoing) checks file
  corruption by clicking on Start - Programs - Accessories - right click
  Command prompt and choose Run as administrator. Type
   
  sfc/scannow
   
  You can clean clean boot
  http://support.Microsoft.com/kb/331796
   
   
  --
  ..
  --
  "Casey Polon" wrote in message news: ee0fe058-d881-40f3-a9ef-c2c0ae5d0936...
  > Hello,
  >
  > My computer crashes immediately after start upward. Sometimes, I had the chance
  > actually click on anything, but more often it just freeze before
  > I can do anything. I'm running it in safe mode now and it works
  > quite well. Any ideas on what I can do?
  >
   
   

• Audition CS5.5 crashes immediately after starting.

  Hello

  I'm under hearing on a MacBook Pro Version 10.6.6 - immediately after the start of attempt and I get a message informing me that the app has left unexpectedly. I try to reopen the application, but in vain. Any suggestions?

  Rename the folder to something else (for example, "4.0_backup").   This will simulate the compensation of your preferences

  ~/Library/preferences/Adobe/Audition/4.0

  Launch and then after that hearing is in the "Hearing Log.txt" file that is created in the new 4.0 file that will create the next time you start hearing.

  You also don't mention if this has always happened since you've installed and activated the product, or if it started after something else.

• Photoshop crashes immediately after starting

  Downloaded Photoshop, program starts, then shortly after the initial home screen presents the program crashes.

  Have uninstalled and reinstalled and rebooted the computer, no effect.

  Win 7 Home Premium SP 1, 8 GB Ram, i5, running

  Have Muse and Lightroom installed, both will work perfectly.

  Go to site AMD make sure you that you have the latest device driver for your installed AMD/ATI video card

• 7.0.0.102 crashes immediately after the connection

  After update to Skype 7, it crashes immediately after the connection.

  I don't have facerig or FFsplit or any webcams. Update of Windows Firewall is disabled.

  The event logs show this:

  Name of the failing application: Skype.exe, version: 7.0.0.102, time stamp: 0x54897add
  Name of the failed module: Skype.exe, version: 7.0.0.102, time stamp: 0x54897add
  Exception code: 0xc0000005
  Offset: 0x00d527d7
  ID of the process failed: 0x1e7c
  Start time of application vulnerabilities: 0x01d029890c579caf
  The failing application path: C:\Program Files (x86)\Skype\Phone\Skype.exe
  Path of the failing module: C:\Program Files (x86)\Skype\Phone\Skype.exe
  Report ID: 58eb96c6-957c-11e4-aae2-00224d806fdf

  Any ideas that I can do to make it work again?

  I don't know, but maybe it's one of several cases in the latest version of Skype 7.0 is not able properly to interpret data from the BIOS. At least, that was the issue with the cases already reported with this error message:

  Exception code: 0xc0000005

  Offset: 0x00d527d7

  A fix may be available in one of the next versions of Skype. In the meantime, the solution is to uninstall version 7.0 and install the 6.21.0.104 previous version.

  http://download.Skype.com/MSI/SkypeSetup_6.21.0.104.msi

• Skype crash just after the connection

  Hello

  Skype crashes just after that I have sign inn approximately 2 sec after a few times too 10 sec until it started a day and a half...

  doesn't look as if it was a local problem, since I can't sign inn on any pc or phone spit just after 1-2 sec

  even if I connect to a pc that has a different uses that inn works recorded, whne I try to connect inn I've kicked 1-2 sec after

  tried to fix most of them, but nothing helps...

  Fixed a problem...

  Just disable the microsoft account and it works again

• Why my games crash immediately after clicking on the icon?

  original title: After double clicking on the icon of the game, the problem windows window appears and says it checks for a solution.  I can't understand how to solve this problem.  It does not occur on all games.

  Why my games crash immediately after clicking on the icon?

  Hello
   
   
   
  1. what game you play when this happens?
  2. have you ever run properly on your computer?
  3 did you changes to the computer recently?
   
  
  Method 1.
  Play this game in the clean boot and then check if it works very well.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
  
   
  Method 2.
  I would like to look at the logs of the same observer. Here's how you can pull up the newspapers:
  Type eventvwr.msc/s in the address bar.
   
  The list of all the events that are listed as 'Error' in the main window when you go to 'Newspapers Windows' and 'Application '. There is often a large number of them. Send us any ones you see listed for the last few days. (Please also do it for the log files in 'System'). When you do, provide us the name of the 'Source' and all that is listed in the description below the list of newspapers box when you click on one.
   
  For more information on event viewer, see the articles below:
  Open event viewer
  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer
  What are the information contained in the logs of the event (Event Viewer)?
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
   
   
  I hope hear from you soon!

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Widows Explorer crashed immediately after Windows update

  Original title: I think that my laptop updated overnight. Now when I try to turn on the widows Explorer crashed immediately after, sign in

  As stated above I think that my updates of the laptop from one day to the next. Now when I boot, windows explore crashes immediately after the connection quite a lot. When I click on an icon

  It records the click but does nothing. None of the icons will load in the right hand icon down either. Help please :(

  Hello

  I suggest you to check the exact error message you get to do this in the Event Viewer:

  Event Viewer is a tool that displays detailed information about the events important (for example, programs that don't start as expected or updates are downloaded automatically) on your computer. The event viewer can be useful when troubleshooting problems and errors with Windows and other programs.

  For more information, see:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Check out this link to open the event viewer:

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  I suggest you to view update history to see which update might be causing the problem.

  (a) open Windows Update by clicking Start , all programs, and then Windows Update.

  (b) in the left pane, click view update history.

  (c) to display more information about an update, double-click it.

  Once you know Update KB number, provide us with the same for further analysis and troubleshooting.

  Method 1:

  Step 1:

  I also suggest you to start the computer in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:

  This could happen if one of the substantive programmes is in conflict with the proper functioning of your computer. To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7 http://support.microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7, mentioned in the article to start the computer to a normal startup.

  Method 2:

  Alternatively, you can try to perform the scan of the auditor of the system files on the computer.

  Click on the link mentioned below for further guidance on the scanning of the file system Checker

  http://support.Microsoft.com/kb/929833

  Note: You may be prompted to insert the Windows Vista installation DVD, if any files are missing or damaged.

  Hope this helps and keep us posted.

• WiFi connects immediately after starting

  Hello community,

  I started having Wifi issues after installation LittleSnitch. It would be irrelevant, but that's when the problem appeared. Although I have already removed, the Wifi connection does not seem to operate normally.

  Before that, it would connect immediately after starting, which means instant access to Chrome or any other browser.

  Now, he continues the search for a few seconds, shows an exclamation point on the wifi icon and then finally connects to my network. This process takes more than 30 seconds.

  I tried several solutions spare, change my location, manual settings, DHCP or DNS, wifi diagnostics, reset my router, but all without success. I still can't get it to connect at the same time.

  Any ideas?

  (El capitan)

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• Flash CC 2014 (1308) crashes immediately after the launch (cloud creative)

  Flash CC 2014 (1308) crashes immediately after the launch (cloud creative)

  Singning and once again, does not solve the problem.

  Thanks for any help.

  Slyrs66

  Abridged version of the accident report:

  Process:	Adobe Flash CC 2014 [1308]
  Path:	/ Applications/Adobe Flash 2014.app/Contents/MacOS/Adobe CC CC CC 2014 Flash 2014/Adobe Flash
  Identifier:	com.adobe.Adobe Flash CC 2014.application
  Version:	14.0.0 (14.0.0.110)
  Code type:	X 86-64 (native)

  Parent process: launchd [661]

  Responsible:	Adobe Flash CC 2014 [1308]
  ID of the user:	501

  Date/time:	2014-07-26 + 0200 10:29:32.313
  OS version:	Mac OS X 10.9.4 (13E28)

  Report Version: 11

  Anonymous UUID: 9B82629F-E84E-F052-F41B-A706B2ABE22F

  Sleep/wake UUID: D850A1E0-2224-409C-915A-BC420034053E

  Crashed thread: 0 dispatch queue: com.apple.main - wire

  Exception type: EXC_CRASH (SIGABRT)

  Exception codes: 0 x 0000000000000000, 0 x 0000000000000000

  Request for clarification:

  termination with eception exception of type dvacore::filesupport:dir_create_exception: $$$ / dvacore/filesupport/DirCreate = the directory ' @0 ' could not be created. " Please check the rights of protection or permission from parent directory.

  Abort() called

  My hardware:

  Model: MacBookPro9 2, MBP91.00D3.B08 of BootROM, 2 processors, Intel Core i7, 2.9 GHz, 8 GB, MSC 2.2f44

  Graphics card: Intel Graphics HD 4000, 4000, Intel HD graphics card integrated

  Memory module: DIMM0/0 BANK, 4 GB DDR3, 1600 MHz, 0x80AD, 0x484D54333531533643465238432D50422020

  Memory module: DIMM0/1 BANK, 4 GB DDR3, 1600 MHz, 0x80AD, 0x484D54333531533643465238432D50422020

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (5.106.98.100.22)

  Bluetooth: Version 4.2.6f1 14216, 3 services, 23 aircraft, 2 incoming serial ports

  Network service: Wi - Fi, AirPort, en1

  Serial ATA Device: APPLE HDD, 1 TB HTS541010A9E682

  Serial ATA Device: OPTIARC DVD RW AD - 5970H

  USB device: Hub

  USB device: Keyboard Hub

  USB Device: Apple keyboard

  USB device: FaceTime HD camera (built-in)

  USB device: Hub

  USB device: Hub

  USB device: Apple keyboard / Trackpad

  USB Device: IR receiver

  USB device: Hub BRCM20702

  USB Device: USB Bluetooth host controller

  Bus crush: MacBook Pro, Apple Inc., 25.1

  Hello, John t. Smith & Mylenium

  I changed the rights... in the Users/[...me folder] / Library/Preferences/Adobe

  Admin: read & write

  User (me): read & write

  system: read & write

  everyone: read only

  and inherited all the rights to subfolders (small gear-> preferences).

  IT WORKED!

  Thank you both for your advice!

  A.

• Photoshop elements Adobe 12 crashes immediately after that the editor is launched

  I just bought Adobe photoshop elements and 12 first. After that my first items installed, I was able to load the Organizer, but the editor crashes immediately after loading. I uninstalled, deleted all the files and folders of adobe and re-installed, only to find the same problem. The editor independently hangs if I load it from the screen flash launch or organizer.

  

  Thanks much for the reply, but I managed to get a conversation with an Adobe support person who has finally solved the problem. I ended up uninstalling, remove both files (sorry can't remember what they were called), re - install (on the C: drive, instead of my D: drive as before) and everything now works fine. Not sure if it was the other player or the files that I deleted that has solved the problem.

• Skype crashing whenever I start it.

  After that I updated to Skype to the newest one, it crashes whenever I start it. I tried to look for further discussions on this forum and tried like 50 different things (IE cleaning, decommissioning, IE, etc etc) now the problem is, Skype 6.14 works fine for me, but in general, the next time I start my PC it auto updated Skype 7.0.0.102 and it works fine, does not crash but my MAIN problem is I can't join some calls because it says I need to put updated my Skype. How in the world I am supposed to "update" my Skype and use it when I can't even it starts without it crashing? It's super annoying, and I can't solve this problem, though even I tried many different methods of fixing that apparently worked for other people, but has not worked for me. The error I get is:

  Name of the failing application: Skype.exe, version: 7.21.0.100, time stamp: 0x56d5f4c5
  Name of the failed module: KERNELBASE.dll, version: 6.1.7601.19160, time stamp: 0x56bcd5c3
  Exception code: 0xe06d7363
  Offset: 0x0000c52f
  ID of the process failed: 0x14b0
  Start time of application vulnerabilities: 0x01d1932ea5d1a75d
  The failing application path: C:\Program Files (x86)\Skype\Phone\Skype.exe
  Path of the failing module: C:\Windows\syswow64\KERNELBASE.dll
  Report ID: ecf22275-ff21-11e5-beb5-d05099204b3c

  http://www.Skype.com/go/getskype-full

  Update on, and that includes also the update of the operating system and drivers

  You can also do a check of the system files:

  Start > Search > cmd > righclick cmd run as admin > sfc/scannow (leave running until the end and hope that all errors are recovrable)

  (if Windows 8.1 or 10, just rightclick start for admin cd shell).

• HP Envy 15-j119so: Envy 15-j119so stops immediately after starting

  My 7 month specifications stops immediately after startup. Briefly, it shows the start screen with the message "to initiate the automatic repair" before to stop completely. The laptop is brand new and I have not experienced problems before today.

  Would it be a virus or a motherboard problem? In any case, if you can help, let me know!

  Thanks in advance.

  Sounds like a hard drive problem possible. Have you tested with the F2 System Diagnostics? Immediately after switching on at startup by pressing the ESC key. A menu opens where F2 is an option. Press F2.

  You are still under warranty. HP support a call.

  If you live in the United States / CA, coordinated HP here.

• RealPlayer crashes immediately after startup, even after uninstall/reintegration repeatedly

  I had accident of Realplayer sporadically in the past using vista and Windows 7.

  But now it blocks everything right of time after start up.  I saw comments buy other users of Windows PC and also on the Realplayer website talking about Windows Media Player causing the problem... Advice is always to disable Windows Media Player, with the exception of the sharing of Media Center program.
  The same error message each time. Inside the error box, he always says the same thing. ;
  
  
  Realpayer has stopped working
  'Problem caused blocking the program works correctly.
  Windows will close the program and notify you if a solution is available. »
  If a solution has been found? I don't want to use Media Player... it is severely limited in what it can do comparied to the real player.
  Thank you.
  Warren

  Hey Warren,

  1. have you done any recent hardware or software changes to the computer before the show?

  2. you try to install the latest version of Real Player on your computer?

  I suggest you view the logs in event viewer to find the defective module that could be causing the Real Player crashing.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  You can check the link which will help you analyze the entries below Event Viewer:

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Please follow the links:

  You need perform a clean boot in order to avoid any conflict with third-party applications to interfere with the computer.

  To put the computer in a clean boot State, you must follow the steps in the article mentioned below and check if it works to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:

  
  

  http://support.Microsoft.com/kb/929135

  Note: You must followstep 7 of the article mentioned above to recover your computer to a Normal startup after performing all the troubleshooting steps.

  For more information:

  Contact the Support of Real Player:

  http://service.real.com/RealPlayer/index_music.html

  I hope this helps.

• CC App crash immediately after the launch, the Adobe solution worsens the problem

  Installed OSX El Capitan a few weeks there are applications used as usual until today, when I decided to try Lightroom. Launched application Adobe CC for the first time since before installing El Capitan. CC App crashed immediately, but I managed to close the session after several attempts. Logs back in, and each application stops working, closes unexpectedly with an error: 16.

  Try this solution without help: aunch.html https://helpx.adobe.com/Creative-Cloud/KB/CC-Desktop-application-Close-immediately-after-l

  Reformat the hard drive, reinstalled DVD Cougar, upgrade to El Capitan, to see whether the problem was related to the third party software. No help. Tried the solution tied once more and managed to launch Illustrator on the first run after install in safe mode, but it is broken as soon as I signed it in the CC system, still in safe mode. Does not not since. But: Now Adobe CC App works in mode without failure, but none of the applications, tried Illustrator and Dreamweaver. Nothing works in normal mode.

  Any suggestions?

  I contacted the Support, and I recommend others to a similar issue to do the same. Creating cloud still does not work, but my applications need.