Skype crashing and poor performance
Hello!
I have a Lumia625 with WP8.1. My problem is that Skype has a very bad performance on my phone. It crashes 6 times out of 10 at the start, and even if I managed to start it, the entire application is slow and laggy. Sometimes, I can't even write a message there is so much lag. Video call is absolutely out of the question. It blocks my whole phone. I have no similar problems with other applications of instant messaging nor with the high end games. There is something obviously with a lot more resources in the Skype app it's supposed to. It is a simple chat program, why would he need so much resource?
The problem seems to come from the lower (512 MB) RAM of my phone model, because I experienced the same effect with the badly written apps that do not have in mind that there are devices of RAM 512, not only 1 GB + ones and use too many resources.
Please, don't try to suggest to reboot/reset the phone, and then reinstall the application. Those who are already behind me, and they did NOT help the problem. I don't mean temporary workaround.
Please find a solution to this problem, because it is super annoying, and I can't use Skype, which will lead to finally let me Skype.
Looks very good, I thought about it. I reinstalled Skype again, but this time before that I did actually, I opened the settings/Storage Wizard and set it to save Apps to the phone (before he was put on the SD card). So after that I reinstalled Skype like this, now it works waay better. It's always a bit slow at the start, but it didn't crash eversince. I can change my profile picture and send messages without lag or crash.
so... If you can improve the performance of Skype when it runs from an SD card, it would be the best solution, but for now it seems to be enough if I intall on the phone storage
Tags: Skype
Similar Questions
-
I'm unable to download the latest version 5.3 of Skype; I get the message unable to create directx device. then Skype crashes and I have to remove it. What I am doing wrong? I have no access to Skype.
Hi Mary,
I suggest you to reinstall Direct X and then Skype. All this after a clean boot!
http://support.Microsoft.com/kb/179113Also, make sure that you try to install the correct version of Skype
https://support.Skype.com/en-us/category/tech/hope this helps,
B Eddie -
Skype crashes and gives me an error Microsoft
Skype crashes and gives me an error of Microsoft - in the Microsoft Windows error box, it says
"Skype has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. »
Hi epertschuk,
1. when the Skype to plant?
2. did you of recent changes on the computer?
3. what Skype version do you use?
Method 1
Uninstall and reinstall Skype on the computer and check if it works.
Uninstall or change a program
http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program
Method 2
If the previous step fails, then confirm your request in the Skype community.
http://Forum.Skype.com/index.php?ShowForum=2
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
When I answer my Skype video call, Skype crashes and a microsoft error message
After execution of all tests with Skype, my system has said everything is AOK with program but why does it shut down when you go to a video call and Microsoft Windows error message appears: Skype has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. Then nothing...
Hi PatrickAlton,
· Did you do changes on the computer before the show?
It is a possibility that a third-party application is causing the conflict with Skype. We can perform the clean boot troubleshooting and check which program is causing the conflict.
See the article below for instructions on how to start your computer in a clean boot state.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
I hope this helps.
-
Skype crashes and gives an error when you try to call.
original title: Skype force closure
When I sign in to Skype and call someone force close program and gives an error message?
Please help, need to Skype!
Hello
1. What is the exact error message that you receive when you use Skype to call?
2 have you made any changes to the computer before the show?
Method 1: Start your computer in a clean boot, and then try to use the Skype program to check whether a third-party program is causing the problem. To configure your computer to clean boot follow the link below.
http://support.Microsoft.com/kb/929135
Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.
Method 2: If the problem persists then, uninstall and reinstall the Skype program and check if that helps. See the following link for uninstall Skype in the programs and features.
http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
Uninstall Skype try to download and install the latest version of Skype for Windows 7 operating system from the following link and check if that helps.
http://www.Skype.com/intl/en-us/get-Skype/on-your-computer/Windows/post-download/
If the problem persists then, I suggest you to ask your question on the forums of Skype.
-
Big screen and poor Performance
I've had my laptop for 2,5 years. When I booted it places this afternoon all the icons were larger than normal and there was yellow wavy lines horizonatally across the screen. I can't seem to normal appearance, and it moves much more slowly than normal. Help!
Looks like your video driver needs to be updated. There are two ways to do this. We need to update the driver through the Device Manager and the other is to go to your laptop manufacturers website and download the latest driver for Vista.
(1) right click on computer and select manage. Select Device Manager. Expand display adapters and right click on the listed graphics card and select Update driver.
2) go to the manufacturers of your laptop's Web site and go to the Support section and search for driver downloads. Even sites, but you can usually get right where you need to go with the exact model number, usually listed at the bottom of the laptop.
I hope this helps!
Mark <> Microsoft Partner
-
Hi ASM expert
You please give me some advice on how to test the speed of the ASM?
Of the 11 GR 1 real material ASM "running on AIX 6.1 RAC cluster" I had to drop a pattern of only 900 M and it took long reaaally.
Anything else I can check?
Thank you.Hello Haggy
What about using the script according to which is an equivalent of the unix iostat but this time for asm?
I would like to know if that helps?
#!/bin/ksh # # NAME # asmiostat.sh # # DESCRIPTION # iostat-like output for ASM # $ asmiostat.sh [-s ASM ORACLE_SID] [-h ASM ORACLE_HOME] [-g Diskgroup] # [-f disk path filter] [
] [ ] # # NOTES # Creates persistent SQL*Plus connection to the +ASM instance implemented # as a ksh co-process # # AUTHOR # Doug Utzig # # MODIFIED # dutzig 08/18/05 - original version # ORACLE_SID=+ASM NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1 NLS_DATE_FORMAT='DD-MON-YYYY HH24:MI:SS' endOfOutput="_EOP$$" typeset -u diskgroup typeset diskgroup_string="Disk Group: All diskgroups" typeset usage=" $0 [-s ASM ORACLE_SID] [-h ASM ORACLE_HOME] [-g diskgroup] [ ] [ ] Output: DiskPath - Path to ASM disk DiskName - ASM disk name Gr - ASM disk group number Dsk - ASM disk number Reads - Reads Writes - Writes AvRdTm - Average read time (in msec) AvWrTm - Average write time (in msec) KBRd - Kilobytes read KBWr - Kilobytes written AvRdSz - Average read size (in bytes) AvWrSz - Average write size (in bytes) RdEr - Read errors WrEr - Write errors " while getopts ":s:h:g:f" option; do case $option in s) ORACLE_SID="$OPTARG" ;; h) ORACLE_HOME="$OPTARG" LD_LIBRARY_PATH=$ORACLE_HOME/lib:$LD_LIBRARY_PATH ;; g) diskgroup="$OPTARG" diskgroup_string="Disk Group: $diskgroup" ;; f) print '-f option not implemented' ;; :) print "Option $OPTARG needs a value" print "$usage" exit 1 ;; \?) print "Invalid option $OPTARG" print "$usage" exit 1 ;; esac done shift OPTIND-1 typeset -i interval=${1:-10} count=${2:-0} index=0 # # Verify interval and count arguments are valid # (( interval <=0 || count<0 )) && { print 'Invalid parameter: must be > 0; must be >= 0' print "$usage" exit 1 } # # Query to run against v$asm_disk_stat # if [[ -z $diskgroup ]]; then query="select group_number, disk_number, name, path, reads, writes, read_errs, write_errs, read_time, write_time, bytes_read, bytes_written from v\$asm_disk_stat where group_number>0 order by group_number, disk_number;" else query="select group_number, disk_number, name, path, reads, writes, read_errs, write_errs, read_time, write_time, bytes_read, bytes_written from v\$asm_disk_stat where group_number=(select group_number from v\$asm_diskgroup_stat where name=regexp_replace('$diskgroup','^\+','')) order by group_number, disk_number;" fi # # Check for version 10.2 or later # typeset version minversion=10.2 version=$($ORACLE_HOME/bin/exp &1 | grep "Export: " | sed -e 's/^Export: Release \([0-9][0-9]*\.[0-9][0-9]*\).*/\1/') if ! (print "$version<$minversion" | bc >/dev/null 2>&1); then print "$0 requires Oracle Database Release $minversion or later" exit 1 fi ############################################################################# # # Fatal error #---------------------------------------------------------------------------- function fatalError { print -u2 -- "Error: $1" exit 1 } ############################################################################# # # Drain all of the sqlplus output - stop when we see our well known string #---------------------------------------------------------------------------- function drainOutput { typeset dispose=${1:-'dispose'} output while :; do read -p output || fatalError 'Read from co-process failed [$0]' if [[ $QUERYDEBUG == ON ]]; then print $output; fi if [[ $output == $endOfOutput* ]]; then break; fi [[ $dispose != 'dispose' ]] && print -- $output done } ############################################################################# # # Ensure the instance is running and it is of type ASM #---------------------------------------------------------------------------- function verifyASMinstance { typeset asmcmdPath=$ORACLE_HOME/bin/asmcmd [[ ! -x $asmcmdPath ]] && fatalError "Invalid ORACLE_HOME $ORACLE_HOME: $asmcmdPath does not exist" $asmcmdPath pwd 2>/dev/null | grep -q '^\+$' || fatalError "$ORACLE_SID is not an ASM instance" } ############################################################################# # # Start the sqlplus coprocess #---------------------------------------------------------------------------- function startSqlplus { # start sqlplus, setup the env $ORACLE_HOME/bin/sqlplus -s '/ as sysdba' |& print -p 'whenever sqlerror exit failure' \ && print -p "set pagesize 9999 linesize 9999 feedback off heading off" \ && print -p "prompt $endOfOutput" \ || fatalError 'Write to co-process failed (startSqlplus)' drainOutput dispose } ############################################################################# ############################################################################# # MAIN #---------------------------------------------------------------------------- verifyASMinstance startSqlplus # # Loop as many times as requested or forever # while :; do print -p "$query" \ && print -p "prompt $endOfOutput" \ || fatalError 'Write to co-process failed (collectData)' stats=$(drainOutput keep) print -- "$stats\nEOL" index=index+1 (( count 0 )) && break sleep $interval done | \ awk ' BEGIN { firstSample=1 } /^EOL$/ { firstSample=0; firstLine=1 next } { path=$4 if (path ~ /^ *$/) next group[path]=$1; disk[path]=$2; name[path]=$3 reads[path]=$5; writes[path]=$6 readErrors[path]=$7; writeErrors[path]=$8 readTime[path]=$9; writeTime[path]=$10 readBytes[path]=$11; writeBytes[path]=$12 # reads and writes readsDiff[path]=reads[path]-readsPrev[path] writesDiff[path]=writes[path]-writesPrev[path] # read errors and write errors readErrorsDiff[path]=readErrors[path]-readErrorsPrev[path] writeErrorsDiff[path]=writeErrors[path]-writeErrorsPrev[path] # read time and write time readTimeDiff[path]=readTime[path]-readTimePrev[path] writeTimeDiff[path]=writeTime[path]-writeTimePrev[path] # average read time and average write time in msec (data provided in csec) avgReadTime[path]=0; avgWriteTime[path]=0 if ( readsDiff[path] ) avgReadTime[path]=(readTimeDiff[path]/readsDiff[path])*1000 if ( writesDiff[path]) avgWriteTime[path]=(writeTimeDiff[path]/writesDiff[path])*1000 # bytes and KB read and bytes and KB written readBytesDiff[path]=readBytes[path]-readBytesPrev[path] writeBytesDiff[path]=writeBytes[path]-writeBytesPrev[path] readKb[path]=readBytesDiff[path]/1024 writeKb[path]=writeBytesDiff[path]/1024 # average read size and average write size avgReadSize[path]=0; avgWriteSize[path]=0 if ( readsDiff[path] ) avgReadSize[path]=readBytesDiff[path]/readsDiff[path] if ( writesDiff[path] ) avgWriteSize[path]=writeBytesDiff[path]/writesDiff[path] if (!firstSample) { if (firstLine) { "date" | getline now; close("date") printf "\n" printf "Date: %s Interval: %d secs %s\n\n", now, '"$interval"', "'"$diskgroup_string"'" printf "%-40s %2s %3s %8s %8s %6s %6s %8s %8s %7s %7s %4s %4s\n", \ "DiskPath - DiskName","Gr","Dsk","Reads","Writes","AvRdTm",\ "AvWrTm","KBRd","KBWr","AvRdSz","AvWrSz", "RdEr", "WrEr" firstLine=0 } printf "%-40s %2s %3s %8d %8d %6.1f %6.1f %8d %8d %7d %7d %4d %4d\n", \ path " - " name[path], group[path], disk[path], \ readsDiff[path], writesDiff[path], \ avgReadTime[path], avgWriteTime[path], \ readKb[path], writeKb[path], \ avgReadSize[path], avgWriteSize[path], \ readErrorsDiff[path], writeErrorsDiff[path] } readsPrev[path]=reads[path]; writesPrev[path]=writes[path] readErrorsPrev[path]=readErrors[path]; writeErrorsPrev[path]=writeErrors[path] readTimePrev[path]=readTime[path]; writeTimePrev[path]=writeTime[path] readBytesPrev[path]=readBytes[path]; writeBytesPrev[path]=writeBytes[path] } END { } ' exit 0 Published by: Hub on November 21, 2009 10:53
-
Skype crashing the program and the PC when making or accepting a call?
Recently, my Skype crashing and freezing my PC when I make or accept a call, so the only thing I could do was to reset my computer. It's never happened before and talk to my friends a pain when they call me will freeze, it will make me sometimes in the call so I can talk but not able to do anything on my computer. Any help to fix this would be greatly appreciated.
Try to uninstall the currently installed version of Skype and install the previous 6.14.0.104 version by using the download links provided here:
Be sure to turn off the automatic updates:
Tools-> Options-> Advanced-> automatic updates-> turn off automatic updates
-
Skype crashing randomly on mac 10.10.3 and Skype 7.6
I can open it, but after 1-5 minutes Skype crashes
I don't have something most downloaded and any help would be apperciated
While the suggestion of D.Schink will work, it will remove all your call history and the cat. There is a much less destructive approach:
Download Skype for Mac 7.7. You may need to run twice, but it will fix the crash at startup you see. -
7.26 Skype crashes when making and receiving calls
Skype crashes whenever I start a call. I tried the solutions of the other posts. Uninstalled and reinstalled the latest version of Skype. Updated my graphic drivers. But the problem persists.
Someone help meThe problem was with .net 3.5 unchecking and re-check the box in the dialog program and features fixed everything. Thank you for your help.
Someone help me -
Skype crashes after a few seconds on both PC and Galaxy S4
Hello
I use Skype for quite a long time now and it's just kind of a weird thing:
I've been connected on Skype with my old Hotmail account and then went away and left it connected as I usually do.
When I come back a few minutes later, Skype is suddenly disconnected.
When I try to sign in again with my Hotmail account, it says that someone else may have used my Hotmail account and it must verify that I am the original user, but it's really old, so as far as I know is the address and the password.
No idea how to fix this, either. So I guess I'm stuck with just using my Skype account, without my Hotmail contacts.
Then I log in and about ~ 5 seconds later late Skype crashes. It happens every time. Tried on my phone and it goes also.
Nothing I know has happened lately. No malware, no one asking questions about the accounts, no update for what it is.
I really need help with this one.
Thanks in advance.If your Skype account is bound with the Microsoft account, then try to separate them.
https://support.Skype.com/en/FAQ/FA12211/how-do-i-unlink-my-Skype-and-Microsoft-or-Facebook-accounts
-
my Skype crashes whenever I click on one - I rebooted and also uninstalled and reinstalled several times
Hello
-What version of Skype is installed on your computer?
-What operating system is installed on your computer?
-Did you change your computer, after which the question began?I recommend you only to contact Skype for support.
https://support.Skype.com/en-us/ -
VPN poor Performance - Cisco RV220W and routers WRVS4400N
Hello
To one of our customer IPSec VPN is established between Cisco RV 220W and routers of Cisco WRVS4400N.
Router VPN /ISP details are as below
Location was Location B Details of the Internet
----------------------
DOWNLOAD: 6 to 10 Mbps
Upload: 1 to 2 MbpsDetails of router
----------------------
Cisco RV220W
Firmware: 1.0.3.5
IKE policy
Encryption: 3DES
Authentication: MD5
Group: Group 2
Life key: 28800 secVPN strategy
Encryption: 3DES
Authentication: SHA - 1
Group: 1024 bits (Group 2)
Life key: 3 600 s
Perfect Forward Secrecy: enabledDetails of the Internet
-------------------------
DOWNLOAD: 1.35 Mbps
Upload: 1.24 MbpsDetails of router
----------------------
Cisco WRVS4400N
Firmware version: V2.0.1.3
Phase 1
Encryption: 3DES
Authentication: MD5
Group: 1024 bits (Group 2)
Life key: 28800 secPhase 2
Encryption: 3DES
Authentication: SHA - 1
Group: 1024 bits (Group 2)
Life key: 3 600 s
Perfect Forward Secrecy: enabledFrom the day that VPN has been implemented, the performance was poor. Frequent disconnections sessions live to the VPN nodes and very low transfer rate was alarming to users.
The servers in A location and users to the site B gets authenticated at the server DC level in A location
Applications of Terminal Server remote as Quickbooks, QQ Evolution, attendance RX serve also the location has by users to the location B
The login is your time and all applications are extremely slow.
I tried to copy files between share data between two locations and the results are as follows
Location A to location B-> 130 Kbps 140 Kbps
Location location B A-> 150 Kbps to 160 Kbps
What can be the problem for these poor performance VPN?
-Change the encryption for the least secure OF THE /MD5 would have a significant impact because it can reduce the overload on the routers?
-Even if both routers are routers SMB, it has really good VPN flow according to the data sheets. I couldn't find VPN flow mentioned in the WRVS4400N data sheet. One of the sons of CSC, I also noticed the VPN of WRVS4400N flow seemed really low as only about 1.6Mbps. (https://supportforums.cisco.com/thread/2107881) Whereas RV220W router has VPN 90Mbps flow, according to the datasheet.
So, what can be the cause of the problem and what can be fixes possible?
Help, please!
ANUP sisi
Beginner to router Cisco VPN, please help
RVS4000 was designed to work in a small office. It supports 5 VPN tunnels with a maxium of 2 Mbps flow measured in a laboratory environment. It has a processor that has a motor integrated IPS, who would deliver 20 Mbps LAN - WAN throughput when IPS is enabled.
RV220W has been designed to operate in a slightly larger office with 25 IPsec VPN tunnels. It has a processor that has a built-in cryptographic engine able to deliver throughput 90 Mbps of IPsec. RV220W also supports 5 SSL VPN tunnels that can be used by employees and business partners for remote access.
-
Skype seems to connect for a split second and then disconnects, said that Skype is not available. Troubleshooting, says incompatible program, try 4.2. Unable to access older Skype, how can I make Skype 5.5 work?
The latest versions of Skype are compatible with Windows 7. The following may help solve the problem: http://support.skype.com/en-us/faq/FA10382/Why-does-Skype-crash-on-my-computer
If this does not resolve the issue, a number of people in Support of Skype forum reported that the installation of the beta version will fix the problem: http://community.skype.com/t5/Windows/SKYPE-STOPPED-WORKING-FIX/td-p/282010 -
Why Skype crash as soon as it is opened?
As soon as I open Skype it crashes, I get the "Skype has stopped working - Windows will look for a solution online and close program" popup... The details are:-
Problem event name: APPCRASH
Application name: Skype.exe
Application version: 5.1.0.112
Application timestamp: 4d4037c2
Fault Module name: ntdll.dll
Fault Module Version: 6.0.6002.18327
Timestamp of Module error: 4cb73436
Exception code: c0000005
Exception offset: 0004a 132
OS version: 6.0.6002.2.2.0.256.6
Locale ID: 3081
Additional information 1: crowd
More information 2: e8adce1c2b9e7be834b4063ac3c53863
Additional information 3: crowd
Additional information 4: e8adce1c2b9e7be834b4063ac3c53863
The problem started suddenly about 2 months ago, and search online for Windows for solutions as well as my Support Ticket with Skype were unproductive. As far as I know, my computer is up-to-date with all program updates and driver.
Help! Thanks, FrankHobart
Hello
· What Skype version do you use?
Method 1:
You can try to reinstall the Skype program.
Refer to this: https://support.skype.com/faq/FA10382/Why-does-Skype-crash-on-my-computer;jsessionid=EB98231DC38162503F1A9440ABA78607?frompage=category
Method 2:
If the problem persists I suggest you to put your system to boot and check if it opens:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135Note: Don't forget to reset the computer to start as usual when you have found the culprit. Follow step 7 on top of the kb article.
Hope this helps,
Maybe you are looking for
-
Is it normal that my iMac Activity Monitor to view 26 Firefox threads when I only have one tab open? Should I worry about this?
-
Satellite L550 - 13 c - can't configure Windows after system recovery
After using the windows recovery discs, I get the message,+ Can not configure windows to run on this computer hardware. + I changed the hard drive in the past, and after that reinstalled the software with the same disk without problem. But now it doe
-
Pavilion dv7 - 4197cl: 2nd set of recovery disks still does not.
Due to the major failure of HARD drive I had to replace it. I did the recovery disc for this computer shortly after getting it. Replaced and upgraded to a Toshiba 1 TB. Tried recovery disc I made. They caused the computer to lock up and just touch e
-
How do I remove photos duplicated in windows xp
How do I remove photos duplicated in windows xp
-
My desktop came with Vista already installed, but after a total crash, I need to start over. I have no OS on it right now, but I have the official Windows product key. Can I use this product key to get a physical boot disk?