Big screen and poor Performance

Similar Questions

• I want to hang the Tower up to my big screen and instead of using a keyboard, I bind a tablet that I can use as a keyboard and to manipulate objects on the screen in real time

  I am in the middle of do a remodeling and think about a furture upgrade my PC at home, I want to hang the Tower up to my big screen and instead of using a keyboard, I want to connect a tablet that I can use as a keyboard and to manipulate objects on the screen in real time. Is there a way to do this?

  (1) before the PC upgrade, please read the complete technical documents for all devices

  you want to go to upgrade

  (2) it is the first thing to do to make complete lists of materials you want to change.

  Compare specifications detaily, note important diference between many of the same features

  (3) for more information on some devices and materials, see link below

  http://www.Microsoft.com/en-us/Windows/compatibility/WIN8/CompatCenter/home?language=en-us

• Skype crashing and poor performance

  Hello!

  I have a Lumia625 with WP8.1. My problem is that Skype has a very bad performance on my phone. It crashes 6 times out of 10 at the start, and even if I managed to start it, the entire application is slow and laggy. Sometimes, I can't even write a message there is so much lag. Video call is absolutely out of the question. It blocks my whole phone. I have no similar problems with other applications of instant messaging nor with the high end games. There is something obviously with a lot more resources in the Skype app it's supposed to. It is a simple chat program, why would he need so much resource?

  The problem seems to come from the lower (512 MB) RAM of my phone model, because I experienced the same effect with the badly written apps that do not have in mind that there are devices of RAM 512, not only 1 GB + ones and use too many resources.

  Please, don't try to suggest to reboot/reset the phone, and then reinstall the application. Those who are already behind me, and they did NOT help the problem. I don't mean temporary workaround.

  Please find a solution to this problem, because it is super annoying, and I can't use Skype, which will lead to finally let me Skype.

  Looks very good, I thought about it. I reinstalled Skype again, but this time before that I did actually, I opened the settings/Storage Wizard and set it to save Apps to the phone (before he was put on the SD card). So after that I reinstalled Skype like this, now it works waay better. It's always a bit slow at the start, but it didn't crash eversince. I can change my profile picture and send messages without lag or crash.

  so... If you can improve the performance of Skype when it runs from an SD card, it would be the best solution, but for now it seems to be enough if I intall on the phone storage

• ASM and poor performance

  Hi ASM expert
  
  You please give me some advice on how to test the speed of the ASM?
  
  Of the 11 GR 1 real material ASM "running on AIX 6.1 RAC cluster" I had to drop a pattern of only 900 M and it took long reaaally.
  
  Anything else I can check?
  
  Thank you.

  Hello Haggy

  What about using the script according to which is an equivalent of the unix iostat but this time for asm?

  I would like to know if that helps?

  #!/bin/ksh
  #
  # NAME
  # asmiostat.sh
  #
  # DESCRIPTION
  # iostat-like output for ASM
  # $ asmiostat.sh [-s ASM ORACLE_SID] [-h ASM ORACLE_HOME] [-g Diskgroup]
  # [-f disk path filter] [] []
  #
  # NOTES
  # Creates persistent SQL*Plus connection to the +ASM instance implemented
  # as a ksh co-process
  #
  # AUTHOR
  # Doug Utzig
  #
  # MODIFIED
  # dutzig 08/18/05 - original version
  #
  
  ORACLE_SID=+ASM
  
  NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1
  NLS_DATE_FORMAT='DD-MON-YYYY HH24:MI:SS'
  
  endOfOutput="_EOP$$"
  
  typeset -u diskgroup
  typeset diskgroup_string="Disk Group: All diskgroups"
  typeset usage="
  $0 [-s ASM ORACLE_SID] [-h ASM ORACLE_HOME] [-g diskgroup] [] []
  
  Output:
  DiskPath - Path to ASM disk
  DiskName - ASM disk name
  Gr - ASM disk group number
  Dsk - ASM disk number
  Reads - Reads
  Writes - Writes
  AvRdTm - Average read time (in msec)
  AvWrTm - Average write time (in msec)
  KBRd - Kilobytes read
  KBWr - Kilobytes written
  AvRdSz - Average read size (in bytes)
  AvWrSz - Average write size (in bytes)
  RdEr - Read errors
  WrEr - Write errors
  "
  
  while getopts ":s:h:g:f" option; do
  case $option in
  s) ORACLE_SID="$OPTARG" ;;
  h) ORACLE_HOME="$OPTARG"
  LD_LIBRARY_PATH=$ORACLE_HOME/lib:$LD_LIBRARY_PATH ;;
  g) diskgroup="$OPTARG"
  diskgroup_string="Disk Group: $diskgroup" ;;
  f) print '-f option not implemented' ;;
  :) print "Option $OPTARG needs a value"
  print "$usage"
  exit 1 ;;
  \?) print "Invalid option $OPTARG"
  print "$usage"
  exit 1 ;;
  esac
  done
  shift OPTIND-1
  
  typeset -i interval=${1:-10} count=${2:-0} index=0
  
  #
  # Verify interval and count arguments are valid
  #
  (( interval <=0 || count<0 )) && {
  print 'Invalid parameter:  must be > 0;  must be >= 0'
  print "$usage"
  exit 1
  }
  
  #
  # Query to run against v$asm_disk_stat
  #
  if [[ -z $diskgroup ]]; then
  query="select group_number, disk_number, name, path, reads, writes, read_errs, write_errs, read_time, write_time, bytes_read, bytes_written from v\$asm_disk_stat where group_number>0 order by group_number, disk_number;"
  else
  query="select group_number, disk_number, name, path, reads, writes, read_errs, write_errs, read_time, write_time, bytes_read, bytes_written from v\$asm_disk_stat where group_number=(select group_number from v\$asm_diskgroup_stat where name=regexp_replace('$diskgroup','^\+','')) order by group_number, disk_number;"
  fi
  
  #
  # Check for version 10.2 or later
  #
  typeset version minversion=10.2
  version=$($ORACLE_HOME/bin/exp &1 | grep "Export: " | sed -e 's/^Export: Release \([0-9][0-9]*\.[0-9][0-9]*\).*/\1/')
  if ! (print "$version<$minversion" | bc >/dev/null 2>&1); then
  print "$0 requires Oracle Database Release $minversion or later"
  exit 1
  fi
  
  #############################################################################
  #
  # Fatal error
  #----------------------------------------------------------------------------
  function fatalError {
  print -u2 -- "Error: $1"
  exit 1
  }
  
  #############################################################################
  #
  # Drain all of the sqlplus output - stop when we see our well known string
  #----------------------------------------------------------------------------
  function drainOutput {
  typeset dispose=${1:-'dispose'} output
  while :; do
  read -p output || fatalError 'Read from co-process failed [$0]'
  if [[ $QUERYDEBUG == ON ]]; then print $output; fi
  if [[ $output == $endOfOutput* ]]; then break; fi
  [[ $dispose != 'dispose' ]] && print -- $output
  done
  }
  
  #############################################################################
  #
  # Ensure the instance is running and it is of type ASM
  #----------------------------------------------------------------------------
  function verifyASMinstance {
  typeset asmcmdPath=$ORACLE_HOME/bin/asmcmd
  [[ ! -x $asmcmdPath ]] && fatalError "Invalid ORACLE_HOME $ORACLE_HOME: $asmcmdPath does not exist"
  $asmcmdPath pwd 2>/dev/null | grep -q '^\+$' || fatalError "$ORACLE_SID is not an ASM instance"
  }
  
  #############################################################################
  #
  # Start the sqlplus coprocess
  #----------------------------------------------------------------------------
  function startSqlplus {
  # start sqlplus, setup the env
  $ORACLE_HOME/bin/sqlplus -s '/ as sysdba' |&
  
  print -p 'whenever sqlerror exit failure' \
  && print -p "set pagesize 9999 linesize 9999 feedback off heading off" \
  && print -p "prompt $endOfOutput" \
  || fatalError 'Write to co-process failed (startSqlplus)'
  drainOutput dispose
  }
  
  #############################################################################
  #############################################################################
  # MAIN
  #----------------------------------------------------------------------------
  verifyASMinstance
  startSqlplus
  
  #
  # Loop as many times as requested or forever
  #
  while :; do
  print -p "$query" \
  && print -p "prompt $endOfOutput" \
  || fatalError 'Write to co-process failed (collectData)'
  stats=$(drainOutput keep)
  
  print -- "$stats\nEOL"
  
  index=index+1
  (( count0 )) && break
  
  sleep $interval
  done | \
  awk '
  BEGIN { firstSample=1
  }
  /^EOL$/ {
  firstSample=0; firstLine=1
  next
  }
  {
  path=$4
  if (path ~ /^ *$/) next
  group[path]=$1; disk[path]=$2; name[path]=$3
  
  reads[path]=$5; writes[path]=$6
  readErrors[path]=$7; writeErrors[path]=$8
  readTime[path]=$9; writeTime[path]=$10
  readBytes[path]=$11; writeBytes[path]=$12
  
  # reads and writes
  readsDiff[path]=reads[path]-readsPrev[path]
  writesDiff[path]=writes[path]-writesPrev[path]
  
  # read errors and write errors
  readErrorsDiff[path]=readErrors[path]-readErrorsPrev[path]
  writeErrorsDiff[path]=writeErrors[path]-writeErrorsPrev[path]
  
  # read time and write time
  readTimeDiff[path]=readTime[path]-readTimePrev[path]
  writeTimeDiff[path]=writeTime[path]-writeTimePrev[path]
  
  # average read time and average write time in msec (data provided in csec)
  avgReadTime[path]=0; avgWriteTime[path]=0
  if ( readsDiff[path] ) avgReadTime[path]=(readTimeDiff[path]/readsDiff[path])*1000
  if ( writesDiff[path]) avgWriteTime[path]=(writeTimeDiff[path]/writesDiff[path])*1000
  
  # bytes and KB read and bytes and KB written
  readBytesDiff[path]=readBytes[path]-readBytesPrev[path]
  writeBytesDiff[path]=writeBytes[path]-writeBytesPrev[path]
  readKb[path]=readBytesDiff[path]/1024
  writeKb[path]=writeBytesDiff[path]/1024
  
  # average read size and average write size
  avgReadSize[path]=0; avgWriteSize[path]=0
  if ( readsDiff[path] ) avgReadSize[path]=readBytesDiff[path]/readsDiff[path]
  if ( writesDiff[path] ) avgWriteSize[path]=writeBytesDiff[path]/writesDiff[path]
  
  if (!firstSample) {
  if (firstLine) {
  "date" | getline now; close("date")
  printf "\n"
  printf "Date: %s Interval: %d secs %s\n\n", now, '"$interval"', "'"$diskgroup_string"'"
  printf "%-40s %2s %3s %8s %8s %6s %6s %8s %8s %7s %7s %4s %4s\n", \
  "DiskPath - DiskName","Gr","Dsk","Reads","Writes","AvRdTm",\
  "AvWrTm","KBRd","KBWr","AvRdSz","AvWrSz", "RdEr", "WrEr"
  firstLine=0
  }
  printf "%-40s %2s %3s %8d %8d %6.1f %6.1f %8d %8d %7d %7d %4d %4d\n", \
  path " - " name[path], group[path], disk[path], \
  readsDiff[path], writesDiff[path], \
  avgReadTime[path], avgWriteTime[path], \
  readKb[path], writeKb[path], \
  avgReadSize[path], avgWriteSize[path], \
  readErrorsDiff[path], writeErrorsDiff[path]
  }
  
  readsPrev[path]=reads[path]; writesPrev[path]=writes[path]
  readErrorsPrev[path]=readErrors[path]; writeErrorsPrev[path]=writeErrors[path]
  readTimePrev[path]=readTime[path]; writeTimePrev[path]=writeTime[path]
  readBytesPrev[path]=readBytes[path]; writeBytesPrev[path]=writeBytes[path]
  }
  END {
  }
  '
  
  exit 0
  

  Published by: Hub on November 21, 2009 10:53

• How can I stop iMovie 10.1.1 from my clips big screen media cultures when I move them to the component of the project (window)?

  I am currently creating a short reel demo/culmination of a feature-length independent full length on my iMac.  The format of independent film is on the big screen and it appears this way in the media window/pane.  But when I take leave of this wide screen support and move clips / add them to the window/pane project and strengthen so the demo highlights reel, clips no longer appear on the big screen - looks like the clips (proportions?) have been cut.

  How can I stop this from happening?

  Thank you!

  If you set 'Placement of Photo' in iMovie preferences to 'Fit' rather than 'Fill' (which I think may be the default) then all your video content will be visible, but you will have bars on it and if the aspect ratio is wider than 16:9.

  

  For clips already in a timeline, you can change the setting to 'Fit' with the crop tool:

  

  Geoff.

• How to do a zoo tycoon 2 big screen

  I searched the internet trying to find out how to make my 2 fill game zoo tycoon ultimate collection the screen! I tried to change the resolution in the game and via the options of the computer, but nothing works. We thought one of the hotfixes can be manipulated, but my version of the game is 33 something, and the task is apparently already installed (colonel Ultimate I guess)

  I know that we must work in a way such as;
  (A) my friend has the same res screen than I (1366 x 768) and his works perfectly
  (B) it worked when I got the base game and ARE installed (which was well back in 2011)
  I have a laptop Dell studio 1555, res screen of 1366 x 768, windows 7 etc. My PC is in line with all the system requirements.
  I bought ultimate collection I lost my base game and had an expansion pack anyway. It used to be big screen and all over the internet people recommend the installation of the base only game and then fixing the problem, but I can't do that everything is installed at the same time.
  Well, I don't want to have the full screen, but the edge-scrolling does not work with the black bars on the side D:
  Any help? :)

  Hello

  1. have you updated any drivers in the computer?

  Run the following method and check if it helps.

  Method 1:

  You can also try to update the drivers to display the Device Manager and check later if the problem persists.

  Update the display driver card:

  a. click Start.
  b. in start search box, type devmgmt.msc , and then on enter.
  (c) in the Device Manager window, expand display adapter.
  d. right-click on the installed display adapter .
  e. click on Update driver software and select the option to search automatically for updated driver software.
  f. restart the computer after the update and check if the problem is resolved.

  See also:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Hope this information is useful.

• I have a small black square box that suddenly appeared on my iPad screen and I can't get rid of it. It is said to perform a zoom, zoom full screen, etc. When you click on it. I have to remove my screen; It drives me crazy.

  I have a small black square that has all of a sudden shiown on my iPad screen and I can't get rid of it. When you click on it, it is said, perform a zoom, zoom full screen, etc. I need because it drives me crazy.

  Help!

  You have one of the accessibility features enabled. Go to settings > General > accessibility and Zoom 'off' (the icon you see is the 'Show' controller on screen Zoom settings) - and check what accessibility shortcuts (a triple-click of the home button) is defined in the lower part of the screen for accessibility

• My screen is too big for my screen and I can't fix it

  For some reason, my screen is now too big for my screen. I can see is over the top (File, edit, minimize, close) or down (the Start button, the clock) at the same time without having to move my mouse in these articles. But it's not fair when I use the internet. That's all the time. When I try to change the resolution, it doesn't change what I see on my screen and I do not see how much of it. Restart do no good either. I have an Eee PC Netbook, model 1005HA. It is brand new. Can anyone think what I can try? Thank you!

  In fact, I realized what it was. Apparently, my screen was changed into a different mode, to do this. How he got that way, I don't know, but it's fixed now. Thank you!

• Size of the screen and now it's too big, I don't see that the button on the screen of the low b/cause is too big... Please help!

  I adjusted the size of my screen and now it's too big, I can't change back b/cause when I go there I can't access the button change downstairs. I was about to return to a bygone era, but again I don't see not the button on the screen of the low b/cause is too big... Please help!

  Hello

  Press the ENTER key on your keyboard instead of clicking OK to change the resolution of the screen as a solution to your problem.

  See you soon.

• VPN poor Performance - Cisco RV220W and routers WRVS4400N

  Hello

  To one of our customer IPSec VPN is established between Cisco RV 220W and routers of Cisco WRVS4400N.

  Router VPN /ISP details are as below

  Location was	Location B
  Details of the Internet ---------------------- DOWNLOAD: 6 to 10 Mbps Upload: 1 to 2 Mbps Details of router ---------------------- Cisco RV220W Firmware: 1.0.3.5 IKE policy Encryption: 3DES Authentication: MD5 Group: Group 2 Life key: 28800 sec VPN strategy Encryption: 3DES Authentication: SHA - 1 Group: 1024 bits (Group 2) Life key: 3 600 s Perfect Forward Secrecy: enabled	Details of the Internet ------------------------- DOWNLOAD: 1.35 Mbps Upload: 1.24 Mbps Details of router ---------------------- Cisco WRVS4400N Firmware version: V2.0.1.3 Phase 1 Encryption: 3DES Authentication: MD5 Group: 1024 bits (Group 2) Life key: 28800 sec Phase 2 Encryption: 3DES Authentication: SHA - 1 Group: 1024 bits (Group 2) Life key: 3 600 s Perfect Forward Secrecy: enabled

  From the day that VPN has been implemented, the performance was poor. Frequent disconnections sessions live to the VPN nodes and very low transfer rate was alarming to users.

  The servers in A location and users to the site B gets authenticated at the server DC level in A location

  Applications of Terminal Server remote as Quickbooks, QQ Evolution, attendance RX serve also the location has by users to the location B

  The login is your time and all applications are extremely slow.

  I tried to copy files between share data between two locations and the results are as follows

  Location A to location B-> 130 Kbps 140 Kbps

  Location location B A-> 150 Kbps to 160 Kbps

  What can be the problem for these poor performance VPN?

  -Change the encryption for the least secure OF THE /MD5 would have a significant impact because it can reduce the overload on the routers?

  -Even if both routers are routers SMB, it has really good VPN flow according to the data sheets. I couldn't find VPN flow mentioned in the WRVS4400N data sheet. One of the sons of CSC, I also noticed the VPN of WRVS4400N flow seemed really low as only about 1.6Mbps. (https://supportforums.cisco.com/thread/2107881)  Whereas RV220W router has VPN 90Mbps flow, according to the datasheet.

  So, what can be the cause of the problem and what can be fixes possible?

  Help, please!

  ANUP sisi

  Beginner to router Cisco VPN, please help

  RVS4000 was designed to work in a small office. It supports 5 VPN tunnels with a maxium of 2 Mbps flow measured in a laboratory environment. It has a processor that has a motor integrated IPS, who would deliver 20 Mbps LAN - WAN throughput when IPS is enabled.

  RV220W has been designed to operate in a slightly larger office with 25 IPsec VPN tunnels. It has a processor that has a built-in cryptographic engine able to deliver throughput 90 Mbps of IPsec. RV220W also supports 5 SSL VPN tunnels that can be used by employees and business partners for remote access.

• Android apps have poor performance

  I have several applications created for Android and all my folios seem poor performance on android devices. It takes a long time for any article to focus on the text (all sheets are built using PDF), and there is a significant for interactivity in a Folio delay, if it does not crash the app entirely. Has anyone else had problems with Android apps? I have not read a lot of useful information on them.

  All my applications are built for android with the dimensions of 2048 x 1536 to make them readable on the Nexus-10. All applications have been rebuilt with v27 and PDFS.

  I'd appreciate comments you can give.

  Thank you

  One thing that can help with the Active Viewer is to design to a smaller size (1024 x 768, for example), use a PDF object and the viewer intensify folios to fit larger screens. Put scale up to adjustment is supported in our 28 Viewer version of AIR and it makes a big difference in performance while maintaining the reasonable quality of the assets.

  Neil

• Blue screen and bad RAM memory?

  My MBP 2011 early all just stopped working yesterday, it worked very well without any problem of performance for the last 5 years, and then suddenly a blue screen (of death) and it has problems starting.

  He will ring the Bell to start, display the bar loading and Apple, and then there will be a glitch on the big screen (horizontally) 1 inch above the Apple, after that, the fans speed up and all that I see a gray screen, not user interface.

  I zapped the PRAM/MSC and tried the unique memory sticks, I have no spare RAM on hand, but who will order soon.

  Tips to solve this problem?

  AHT says this - 65/4MEM/4000000000: 0x84f6f918

  Google says it is bad memory

  Here is the BSoD:

  

  I think you have a problem of memory, although if your MacBook Pro 15 or 17 inch, you should consider video issue as well now.

  http://www.Apple.com/support/MacBookPro-videoissues/

• I am unable to get m widescreen developing photo it shows a negative only.  I can't use develop room without seeing my picture in the big screen.  Any suggestions?

  Does anyone know how to change the big screen in the room in development in lightroom to a negative to the real photo?

  Go to Edit (Lightroom on a Mac) > preferences > Performance and uncheck CPU graph use.

• My 4th generation Apple TV installed an update and asked my password which he refused to accept time and time again. How to go beyond this screen and reset the unit?

  My 4th generation Apple TV installed an update and asked my password which he refused to accept time and time again. How to go beyond this screen and reset the unit?

  If she needs your Apple ID password and you have enabled 2-factor authentication, you might have to temporarily disable the connection to complete.

  Also, you need an internet connection to perform this step here.

  If your problem is not of the above, please describe more completely. Furthermore, to give specific messages on the screen.

• Poor performance of Firefox after you apply the latest Microsoft Updates (Win 7 x 64); all solutions?

  Recently, I updated to Firefox 27 and noticed really horrible performance (Manager tasks indicates FF connecting a carrot, frequent "Firefox is not responding messages", even strikes in late development in the URL bar). It's on an Ideapad s205 (AMD E450 APU, Win 7 x 64, 8 GB RAM, SSD) who has always had pretty decent web browsing performance for a low end machine.

  At first, I blamed FF because poor performance coincided with the update to version 27, but now I think that the first cause to be a recent Microsoft Update. The reason is that my wife has a laptop with a same low-end APU (APU C60, hard drive 5400 RPM, 4 GB of RAM, Win 7 x 64), and she was getting much better performance with FF27 until I applied a backlog of some 90 + updates. Now she suffers from the same poor performance I am and she is pretty p * ssed at home.

  Interestingly, I have two WIn 7 x 64 Intel computers to office who have 27 FF and are fully patched, and performance are very good. Maybe this problem is specific to AMD APU.

  Any thoughts? I tried to turn off the backend Azure with some comments in this forum, but makes little or no difference.

  Thank you!

  Success! 32 FF seems to have solved my problems of performance. Thank you!